-
Materials (Basel, Switzerland) Mar 2019The incorporation of functional monomers in dental adhesive systems promotes chemical interaction with dental substrates, resulting in higher adhesion forces when... (Review)
Review
The incorporation of functional monomers in dental adhesive systems promotes chemical interaction with dental substrates, resulting in higher adhesion forces when compared to micromechanical adhesion only. The 10-MDP monomer, whose chemical structure allows for a polar behavior which is favorable to adhesion, also promotes the protection of collagen fibers through the formation of MDP-calcium salts. This systematic review aimed to characterize the interface created by 10-MDP containing adhesive systems through an evaluation of the following parameters: Formation of nano-layered structures, capacity to produce an acid-base resistant zone, and adhesion stability. The research was conducted using PubMed, Cochrane Library, Web of Science and Embase, limited to English, Spanish, and Portuguese articles. The research was done according to the PICO strategy. The 10-MDP monomer has the capacity to produce an acid-base resistant zone on the adhesive interface, which increases the response to acid-base challenges. The adhesion established by these systems is stable over time. To have the best of these adhesive solutions, a scrubbing technique must be used to apply the adhesive system on dental substrates, in order to improve monomers infiltration and to create a stable bond. Time must be given for the solution to infiltrate, hybridize and form the MDP-Ca, improving adhesive stability.
PubMed: 30866488
DOI: 10.3390/ma12050790 -
Journal of Dentistry Jul 2015A systematic review was conducted to determine whether the etch-and-rinse or self-etching mode is the best protocol for dentin and enamel adhesion by universal adhesives. (Meta-Analysis)
Meta-Analysis Review
OBJECTIVES
A systematic review was conducted to determine whether the etch-and-rinse or self-etching mode is the best protocol for dentin and enamel adhesion by universal adhesives.
DATA
This report followed the PRISMA Statement. A total of 10 articles were included in the meta-analysis.
SOURCES
Two reviewers performed a literature search up to October 2014 in eight databases: PubMed, Web of Science, Scopus, BBO, SciELO, LILACS, IBECS and The Cochrane Library.
STUDY SELECTION
In vitro studies evaluating the bond strength of universal adhesives to dentin and/or enamel by the etch-and-rinse and self-etch strategies were eligible to be selected. Statistical analyses were conducted using RevMan 5.1 (The Cochrane Collaboration, Copenhagen, Denmark). A global comparison was performed with random-effects models at a significance level of p<0.05.
RESULTS
The analysis of dentin micro-tensile bond strength showed no statistically significant difference between the etch-and-rinse and self-etch strategies for mild universal adhesives (p≥0.05). However, for the ultra-mild All-Bond Universal adhesive, the etch-and-rinse strategy was significantly different than the self-etch mode in terms of dentin micro-tensile bond strength, as well as in the global analysis of enamel micro-tensile and micro-shear bond strength (p≤0.05).
CONCLUSIONS
The enamel bond strength of universal adhesives is improved with prior phosphoric acid etching. However, this effect was not evident for dentin with the use of mild universal adhesives with the etch-and-rinse strategy.
CLINICAL SIGNIFICANCE
Selective enamel etching prior to the application of a mild universal adhesive is an advisable strategy for optimizing bonding.
Topics: Composite Resins; Dentin; Dentin-Bonding Agents; Materials Testing; Methacrylates; Resin Cements; Surface Properties
PubMed: 25882585
DOI: 10.1016/j.jdent.2015.04.003 -
Dentistry Journal Aug 2019Reliable bonding between resin composite cements and high strength ceramics is difficult to achieve because of their chemical inertness and lack of silica content that... (Review)
Review
Reliable bonding between resin composite cements and high strength ceramics is difficult to achieve because of their chemical inertness and lack of silica content that makes etching impossible. The purpose of this review is to classify and analyze the existing methods and materials suggested to improve the adhesion of zirconia to dental substrate by using composite resins, in order to explore current trends in surface conditioning methods with predictable results. The current literature, examining the bond strength of zirconia ceramics, and including in vitro studies, clinical studies, and a systematic review, was analyzed. The research in the literature was carried out using PubMed and Cochrane Library databases, only papers in English, published online from 2013 to 2018. The following keywords and their combinations were used: Zirconia, 3Y-TZP, Adhesion, Adhesive cementation, Bonding, Resin, Composite resin, Composite material, Dentin, Enamel. Research, in PubMed and Cochrane Library databases, provided 390 titles with abstracts. From these, a total of 93 publications were chosen for analysis. After a full text evaluation, seven articles were discarded. Therefore, the final sample was 86, including in vitro, clinical studies, and one systematic review. Various adhesive techniques with different testing methods were examined. Airborne-particle abrasion and tribo-chemical silica coating are the pre-treatment methods with more evidence in the literature. Increased adhesion could be expected after physico-chemical conditioning of zirconia. Surface contamination has a negative effect on adhesion. There is no evidence to support a universal adhesion protocol.
PubMed: 31374820
DOI: 10.3390/dj7030074 -
Clinical Oral Investigations Dec 2021The survival rate of indirect partial adhesive restorations on vital versus endodontically treated teeth is still controversial. The hypothesis is that there may be a... (Meta-Analysis)
Meta-Analysis Review
OBJECTIVES
The survival rate of indirect partial adhesive restorations on vital versus endodontically treated teeth is still controversial. The hypothesis is that there may be a difference in the survival rate of partial adhesive restorations performed on non-vital teeth compared to vital teeth.
MATERIALS AND METHODS
This systematic review was conducted following the PRISMA guidelines. The considered clinical studies investigated the outcomes of adhesive inlays, onlays, and overlays conducted over the past 40 years, focusing on Kaplan-Meier survival curves to calculate the hazard ratio (primary objective) and the survival rate (secondary objective) between vital and non-vital teeth. The risk of bias was assessed using the Newcastle-Ottawa Scale. Studies included in the review were identified through bibliographic research on electronic databases ("PubMed," "Scopus," "Cochrane Central Register of Controlled Trial," and "Embase"). The K agreement between the two screening reviewers was evaluated.
RESULTS
A total of 55,793 records were identified on PubMed, Scopus, and other bibliographic sources, and after the application of the eligibility and inclusion criteria, eight articles were included for qualitative analysis and six for quantitative analysis. The meta-analysis of the primary and secondary outcomes demonstrated that hazard ratios (HR = 8.41, 95% CI: [4.50, 15.72]) and survival rates (OR = 3.24, 95% CI: [1.76, 5.82]) seemed more favorable for indirect partial adhesive restorations on vital teeth than for those on endodontically treated teeth.
CONCLUSIONS
Within the limits of this study, these findings suggest that the risk of failure of indirect partial adhesive restorations on endodontically treated teeth is higher than on vital teeth.
CLINICAL RELEVANCE
The use of partial adhesive restorations on vital and endodontically treated teeth showed different long-term clinical outcomes.
Topics: Composite Resins; Dental Restoration Failure; Dental Restoration, Permanent; Humans; Inlays; Kaplan-Meier Estimate; Mass Screening; Tooth, Nonvital
PubMed: 34628547
DOI: 10.1007/s00784-021-04187-x -
Polymers Mar 2021Currently, the availability of a wide variety of universal adhesives makes it difficult for clinicians to choose the correct system for specific bonding situations to... (Review)
Review
Currently, the availability of a wide variety of universal adhesives makes it difficult for clinicians to choose the correct system for specific bonding situations to dentin substrate. This study aimed to determine whether there are any alternative techniques or additional strategies available to enhance the bond strength of universal adhesives to dentin through a systematic review and meta-analysis. Two reviewers executed a literature search up to September 2020 in four electronic databases: PubMed, ISI Web of Science, Scopus, and EMBASE. Only in vitro studies that reported the dentin bond strength of universal adhesives using additional strategies were included. An analysis was carried out using Review Manager Software version 5.3.5 (The Nordic Cochrane Centre, The Cochrane Collaboration, Copenhagen, Denmark). The methodological quality of each in vitro study was assessed according to the parameters of a previous systematic. A total of 5671 potentially relevant studies were identified. After title and abstract examination, 74 studies remained in systematic review. From these, a total of 61 studies were included in the meta-analysis. The bond strength of universal adhesives to dentin was improved by the use of one of the following techniques: Previous application of matrix metalloproteinases (MMP) inhibitors ( < 0.001), prolonged application time ( = 0.007), scrubbing technique ( < 0.001), selective dentin etching ( < 0.001), non-atmospheric plasma ( = 0.01), ethanol-wet bonding ( < 0.01), prolonged blowing time ( = 0.02), multiple layer application ( = 0.005), prolonged curing time ( = 0.006), and hydrophobic layer coating ( < 0.001). On the other hand, the use of a shortened application time ( = 0.006), and dentin desensitizers ( = 0.01) impaired the bond strength of universal adhesives to dentin. Most of the analyses performed showed a high heterogenicity. The in vitro evidence suggests that the application of universal adhesives using some alternative techniques or additional strategies may be beneficial for improving their bonding performance to dentin. This research received no external funding. Considering that this systematic review was carried out only with in vitro studies, registration was not performed.
PubMed: 33799923
DOI: 10.3390/polym13050814 -
Dental Materials : Official Publication... Aug 2022The loss of the dental coronal portion following carious lesions or fractures leads to endodontic treatment with subsequent restoration to ensure correct anatomy and... (Meta-Analysis)
Meta-Analysis Review
OBJECTIVE
The loss of the dental coronal portion following carious lesions or fractures leads to endodontic treatment with subsequent restoration to ensure correct anatomy and function. Recently, partial adhesive restorations have been widely proposed to increase the survival rate of endodontically treated teeth. The primary purpose of this review is to assess the failure rate of indirect partial adhesive restorations on endodontically treated teeth (ETT), considering the follow-up period.
METHODS
The indications reported in the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) were used to draft the present review. The study was constructed on PICO questions: population (patients who need indirect adhesive restorative treatment on endodontically treated teeth with onlay and overlay), intervention (onlay and overlay), control (patients with onlay and overlay on endodontically treated teeth) and outcome (failure rate and types of failure for onlay and overlay). The asked scientific question was: what are the failure rate and types of failure for adhesive indirect partial restorations on ETT?
RESULTS
The overall failure rate that emerges is 0.087 with a ratio of 121/1254, I 80 % p-value< 0.001. Moreover, by meta-regression with covariates the follow-up period reports a coefficient of 0.013 with a P-value< 0.001. In conclusion, the indirect partial restorations on endodontically treated teeth displayed overall acceptable outcomes in terms of success from 2 to 4 years after their placement with only 4.32 % of failure. Failures increase after 7 years up to 12-30 years with failure rates of approximatively 10.65 % and 20.94 %. The analysis of the included articles reporting the causes of restorations failures showed that 15.51 % of cases were related to the loss of dental element.
SIGNIFICANCE
Besides the survival rates of indirect adhesive restorations on endodontically treated posterior teeth, it was highlighted that the majority of failures appeared restorable. Thus, partial restorations seemed able to prevent the ETT tooth loss.
Topics: Composite Resins; Dental Restoration Failure; Dental Restoration, Permanent; Humans; Inlays; Prognosis; Tooth, Nonvital
PubMed: 35835608
DOI: 10.1016/j.dental.2022.06.018 -
Dental Materials : Official Publication... Oct 2021The purpose of this systematic review and meta-analysis was to analyze the literature on the bond strength of self-etching (SE) adhesives containing 10-MDP or other... (Meta-Analysis)
Meta-Analysis Review
OBJECTIVE
The purpose of this systematic review and meta-analysis was to analyze the literature on the bond strength of self-etching (SE) adhesives containing 10-MDP or other acidic functional monomers, comparing the bonding performance of both compositions.
METHODS
This study is registered in PROSPERO (CRD42020175715) and it followed the PRISMA Statement. The literature search was performed in PubMed, Web of Science, SciELO, Scopus, LILACS, IBECS, and BBO from the starting coverage date through 30 June 2021. Study eligibility criteria consisted of in vitro studies that evaluated the bond strength (microtensile, microshear, tensile or shear testing) to sound dentin/enamel of a minimum of two distinct SE systems, with at least one material containing 10-MDP and one other being comprised of a distinct acidic composition. Statistical analyses were carried out with RevMan 5.3.5 and using random-effects models with the significance level at p < 0.05. Also, Bayesian network meta-analysis (NMA) was conducted using MetaInsight V3 tool.
RESULTS
From 740 relevant studies evaluated in full-text analysis, 210 were incorporated to the systematic review and 206 in meta-analysis. The majority of studies was classified as having medium risk of bias (56.7%), followed by low (35.2%) and high (8.1%) risk of bias. Data from a total of 64 adhesive systems were collected, which favored the 10-MDP-based group at both dentin (overall effect: 6.98; 95% CI: 5.61, 8.36; p < 0.00001) and enamel (overall effect: 2.79; 95% CI: 1.62, 3.96; p < 0.00001) substrates. Microtensile testing was more frequently used (73.4%) in the included studies. Adhesives based on 10-MDP showed greater bonding performance than adhesives comprised of monomers such as PENTA, 6-MHP, 4-META, 4-MET, pyrophosphate esters, mixed composition or monomers derived from sulfonic acid (p ≤ 0.01); whereas similar bond strength values were verified between 10-MDP-based materials and those containing PEM-F, acrylamide phosphates, 4-AET, MAC-10, or monomers derived from polyacrylic and phosphonic acids (p ≥ 0.05). Adhesives based on GPDM were the only ones that resulted in greater bonding potential than the 10-MDP-based group (p = 0.03). Dental bonds in dentin were favored with the application of 2-step 10-MDP-based adhesives; whereas in enamel the dental bonds were favored for both 2-steps versions of adhesives, regardless of the presence of 10-MDP. Indirect evidence from NMA revealed that 1-step 10-MDP-free and universal 10-MDP-free adhesives seemed to perform worst in dentin and enamel, respectively.
SIGNIFICANCE
Adhesives containing 10-MDP showed higher bonding performance than materials formulated with other acidic ingredients, although this result relied on the type of mechanical testing, type of the substrate, acidic composition of the adhesive, and the application category of the SE system. This review summarized the effects of the foregoing factors on the adhesion to dental substrates.
Topics: Bayes Theorem; Dental Bonding; Dental Cements; Dentin; Dentin-Bonding Agents; Materials Testing; Methacrylates; Resin Cements; Tensile Strength
PubMed: 34456050
DOI: 10.1016/j.dental.2021.08.014 -
International Orthopaedics Jun 2022There is currently no consensus regarding the optimal treatment for stiffness following total knee arthroplasty (TKA). With the increased utilization of value-based... (Review)
Review
PURPOSE
There is currently no consensus regarding the optimal treatment for stiffness following total knee arthroplasty (TKA). With the increased utilization of value-based models, it is important to determine the most effective treatments that will reduce the need for further intervention and additional expenditure. A systematic review was performed to compare the outcomes of manipulation under anaesthesia (MUA), arthroscopic lysis of adhesions (aLOA), and revision TKA (rTKA) for arthrofibrosis and stiffness following TKA.
METHODS
PubMed and MEDLINE databases were reviewed for articles published through October 2020. Studies were included if they reported patient-reported outcome measures (PROMs) following MUA, aLOA, or rTKA. The primary endpoint was PROMs, while secondary outcomes included range of motion and the percentage of patients who pursued further treatment for stiffness.
RESULTS
A total of 40 studies were included: 21 on rTKA, 7 on aLOA, and 14 on MUA. The mean or median post-operative arc ROM was > 90° in 6/20 (30%) rTKA, 5/7 (71%) aLOA, and 7/10 (70%) MUA studies. Post-operative Knee Society (KSS) clinical and functional scores were the greatest in patients who underwent MUA and aLOA. As many as 43% of rTKA patients required further care compared to 25% of aLOA and 17% of MUA patients.
CONCLUSION
Stiffness following TKA remains a challenging condition to treat. Nonetheless, current evidence suggests that patients who undergo rTKA have poorer clinical outcomes and a greater need for further treatment compared to patients who undergo MUA or aLOA.
Topics: Arthroplasty, Replacement, Knee; Humans; Joint Diseases; Knee Joint; Range of Motion, Articular; Retrospective Studies; Treatment Outcome
PubMed: 35301559
DOI: 10.1007/s00264-022-05344-x -
International Journal of Nursing Studies Jan 2024Central venous catheters are commonly used in healthcare, but they come with a range of potential complications. Over the last 15 years, an influx of securement and... (Meta-Analysis)
Meta-Analysis Review
BACKGROUND
Central venous catheters are commonly used in healthcare, but they come with a range of potential complications. Over the last 15 years, an influx of securement and dressing products has been released, with unknown overall effectiveness to prevent these complications.
OBJECTIVE
To compare the effects of dressings and securement devices for central venous catheters on a range of common complications including catheter-related bloodstream infection, catheter tip colonisation, entry/exit-site infection, skin colonisation, skin irritation, failed catheter securement, dressing durability and mortality.
DESIGN
Systematic review with meta-analysis.
METHODS
Following standard Cochrane methods, a systematic search of Cochrane Wounds Trials Register, Cochrane Central Register of Controlled Trials, MEDLINE Ovid, Embase Ovid, EBSCO CINAHL, and multiple clinical trial registries was completed in November 2022. Randomised controlled trials evaluating the effectiveness of dressing and securement devices for all CVC types were included. A random-effects model was used during the meta-analysis. Results were expressed using risk ratio (RR), rate ratio, or mean difference (MD), with 95 % confidence intervals (CIs). Methodological quality and bias were assessed.
RESULTS
We included 46 studies involving 10,054 participants. All studies had either an unclear or high-performance bias. The blinding of outcome assessment was unclear in most studies. Chlorhexidine gluconate-impregnated dressings, compared with standard polyurethane dressings, may reduce the incidence (7 studies; N = 5816; RR 0.60, 95 % CI 0.44-0.83; low certainty evidence) and rate (4 studies; N = 4447; RR 0.51, 95 % CI 0.32-0.79; moderate certainty evidence) of catheter-related bloodstream infection and catheter tip colonisation (8 studies; N = 4788; RR 0.70, 95 % CI 0.52-0.95; very low certainty evidence). Medication-impregnated dressings may reduce the incidence of catheter-related bloodstream infection (6 studies; N = 5687; RR 0.60, 95 % CI 0.39-0.93; low certainty evidence) and catheter-tip colonisation (7 studies; N = 4769; RR 0.60, 95 % CI 0.47-0.76; low certainty evidence) relative to non-impregnated dressing types. Tissue adhesive may increase the risk of skin irritation or damage compared with integrated securement dressings (3 studies; N = 166; RR 1.88, 95 % CI 1.09-3.24; low certainty evidence) or sutureless securement devices (4 studies; N = 241; RR 1.64, 95 % CI 1.10-2.44; moderate certainty evidence). Tissue adhesive increased dressing durability compared with integrated securement dressings (MD 43.03 h, 95 % CI 4.88-81.18; moderate certainty evidence) and sutureless securement devices (MD 42.90 h, 4.64-81.16; moderate certainty evidence). Tissue adhesive increased failed catheter securement rate compared with suture (2 studies; N = 103; RR 9.33, 95 % CI 1.10-79.21; moderate certainty evidence).
CONCLUSIONS
The findings of the review provide insights and guidance for clinicians in selecting the appropriate dressings and securements for catheters. Findings should be interpreted with caution due to heterogeneity in catheters and patient types.
REGISTRATION
#CD010367.
TWEETABLE ABSTRACT
Time to implement chlorhexidine gluconate-impregnated dressings to prevent catheter-related bloodstream infections; a meta-analysis by @GraceNP and team.
Topics: Humans; Central Venous Catheters; Tissue Adhesives; Bandages; Sepsis
PubMed: 37879273
DOI: 10.1016/j.ijnurstu.2023.104620 -
Swiss Dental Journal Dec 2021The objective was to systematically analyse clinical studies on restorative procedures for teeth affected by molar-incisor hypomineralisation (MIH). The databases...
The objective was to systematically analyse clinical studies on restorative procedures for teeth affected by molar-incisor hypomineralisation (MIH). The databases PubMed, Embase, and Cochrane Library were searched. Only retrospective and prospective clinical studies dealing with sealing or restoration of MIH-affected teeth were included. The language was restricted to English or German. Thirteen of 36 potentially eligible studies were included focusing on the following subjects: extension of enamel preparation, adhesive procedures prior to restoration, application of fissure sealants as well as restoration with conventional glass ionomer cements (GIC), resin modified glass ionomer cements (RMGIC), resin composites, and indirect restorations. Seven clinical studies were controlled trials. However, only two included MIH-unaffected teeth as control. No meta-analysis was performed due to the heterogeneity of study designs (e.g. severity of MIH or the restorative materials investigated). Based on the present analysis, the annual failure rates were in average 21% for fissure sealants, 22% for GIC, 1-6% for RMGIC, 13-32% for resin composites, and 0-7% for indirect restorations. In summary, only few tendencies can be deduced from this review at a low level of evidence (number of studies): 1) preparation margins in sound enamel seem to be superior to preparations in hypomineralised enamel (1 study), 2) RMGIC seems to be superior to GIC (3 studies), 3) resin composites may be used for restoring all severities of MIH (7 studies) with self-etch and etch-and-rinse adhesive systems generally not performing differently (3 studies), and 4) in cases of severe MIH, indirect restorations showed a good clinical success (4 studies).
Topics: Dental Enamel Hypoplasia; Dental Restoration, Permanent; Humans; Incisor; Molar; Prospective Studies; Retrospective Studies
PubMed: 33764037
DOI: 10.61872/sdj-2021-12-764