-
Experimental and Therapeutic Medicine Jul 2024Ammonia (NH) is an irritating and harmful gas that affects cell apoptosis and autophagy. Sirtuin 5 (SIRT5) has multiple enzymatic activities and regulates NH-induced...
Ammonia (NH) is an irritating and harmful gas that affects cell apoptosis and autophagy. Sirtuin 5 (SIRT5) has multiple enzymatic activities and regulates NH-induced autophagy in tumor cells. In order to determine whether SIRT5 regulates NH-induced bovine mammary epithelial cell apoptosis and autophagy, cells with SIRT5 overexpression or knockdown were generated and in addition, bovine mammary epithelial cells were treated with SIRT5 inhibitors. The results showed that SIRT5 overexpression reduced the content of NH and glutamate in cells by inhibiting glutaminase activity in glutamine metabolism, and reduced the ratio of ADP/ATP. The results in the SIRT5 knockdown and inhibitor groups were comparable, including increased content of NH and glutamate in cells by activating glutaminase activity, and an elevated ratio of ADP/ATP. It was further confirmed that SIRT5 inhibited the apoptosis and autophagy of bovine mammary epithelial cells through reverse transcription-quantitative PCR, western blot, flow cytometry with Annexin V FITC/PI staining and transmission electron microscopy. In addition, it was also found that the addition of LY294002 or Rapamycin inhibited the PI3K/Akt or mTOR kinase signal, decreasing the apoptosis and autophagy activities of bovine mammary epithelial cells induced by SIRT5-inhibited NH. In summary, the PI3K/Akt/mTOR signal involved in NH-induced cell autophagy and apoptosis relies on the regulation of SIRT5. This study provides a new theory for the use of NH to regulate bovine mammary epithelial cell apoptosis and autophagy, and provides guidance for improving the health and production performance of dairy cows.
PubMed: 38827477
DOI: 10.3892/etm.2024.12584 -
International Journal of Biological... Jun 2021In this study, we generated chitosan nanoparticles by exploiting the electrostatic interactions between positively charged hydroxypropyltrimethyl ammonium chloride...
In this study, we generated chitosan nanoparticles by exploiting the electrostatic interactions between positively charged hydroxypropyltrimethyl ammonium chloride chitosan (HACC) and negatively charged carboxymethyl chitosan (CMC), and examined the effects of altering the molecular weight and carboxymethyl substitution sites of the chitosan molecules. Particle size, potential, and encapsulation efficiency of the various chitosan nanoparticles were examined; the particle size range was 162.40-332.80 nm, the charge range was 19.50-40.60 mV, and the encapsulation efficiency range was 48.4-70.7%. We then examined the immunostimulatory effects of the nanoparticle variants on dendritic cells (DCs); we found that the site of carboxymethyl substitution significantly affected the immunostimulatory effects of the nanoparticles. Two nanoparticle types, 200 kDa N,O-carboxymethyl chitosan-HACC (NO-CMC-HACC) and N-carboxymethyl chitosan-HACC (N-CMC-HACC), greatly promoted the expression of interleukin-6, tumor necrosis factor, and interleukin-1β in DCs. Moreover, NO-CMC-HACC nanoparticles caused an increase in major histocompatibility complex-II (MHC-II), CD11c, CD80, and CD86 secretion in DCs, indicating that these nanoparticles promoted antigen presentation. We then examined chitosan nanoparticle uptake by DCs using laser confocal microscopy; we found that the NO-CMC-HACC nanoparticles were more readily absorbed by DCs compared to the N-CMC-HACC nanoparticles. Therefore, we concluded that 200 kDa NO-CMC-HACC nanoparticles exhibited strong potential as immunological adjuvants.
Topics: Animals; Antigens; Cell Death; Cell Line; Cell Survival; Chitosan; Cytokines; Dendritic Cells; Gene Expression Regulation; Humans; Immunization; Molecular Weight; Nanoparticles; Particle Size; Quaternary Ammonium Compounds; Spectroscopy, Fourier Transform Infrared; Static Electricity
PubMed: 33781818
DOI: 10.1016/j.ijbiomac.2021.03.148 -
Applied Biochemistry and Biotechnology Nov 2018As phenylalanine dehydrogenase (PheDH) plays an important role in the synthesis of chiral drug intermediates and detection of phenylketonuria, it is significant to...
As phenylalanine dehydrogenase (PheDH) plays an important role in the synthesis of chiral drug intermediates and detection of phenylketonuria, it is significant to obtain a PheDH with specific and high activity. Here, a PheDH gene, pdh, encoding a novel BhPheDH with 61.0% similarity to the known PheDH from Microbacterium sp., was obtained. The BhPheDH showed optimal activity at 60 °C and pH 7.0, and it showed better stability in hot environment (40-70 °C) than the PheDH from Nocardia sp. And its activity and thermostability could be significantly increased by sodium salt. After incubation for 2 h in 3 M NaCl at 60 °C, the residual activity of the BhPheDH was found to be 1.8-fold higher than that of the control group (without NaCl). The BhPheDH could tolerate high concentration of ammonium chloride and its activity could be also enhanced by the high concentration of ammonium salts. These characteristics indicate that the BhPheDH possesses better thermostability, ammonium chloride tolerance, halophilic mechanism, and high salt activation. The mechanism of thermostability and high salt tolerance of the BhPheDH was analyzed by molecular dynamics simulation. These results provide useful information about the enzyme with high-temperature activity, thermostability, halophilic mechanism, tolerance to high concentration of ammonium chloride, higher salt activation and enantio-selectivity, and the application of molecular dynamics simulation in analyzing the mechanism of these distinctive characteristics.
Topics: Amino Acid Oxidoreductases; Ammonium Chloride; Bacillus; Bacterial Proteins; Enzyme Stability
PubMed: 29740797
DOI: 10.1007/s12010-018-2767-6 -
Veterinary World Dec 2022A change in the livestock feeding strategy is of utmost importance for the stability of animal health and sustainable livestock productivity to overcome the problem of...
BACKGROUND AND AIM
A change in the livestock feeding strategy is of utmost importance for the stability of animal health and sustainable livestock productivity to overcome the problem of subsiding the environmental effects of sheep production. Supplementing dietary feed with safe and efficient additives provides optimal animal performance and maximizes productivity. This study aimed to assess the effects of adding various feed additives to lamb rations for optimizing feed efficiency in weaned lambs for meat production in Kuwait.
MATERIALS AND METHODS
The feed additives, namely, ammonium chloride, urea, algae, fishmeal, and humic acid, were investigated on the physical performance of lambs for their effect on body weight, length, height, and waist length. The total feed consumption rate and feed efficiency were also measured. Each treatment comprising five healthy lambs was randomly allocated into six treatments comprising 30 lambs. The six treatments were the basal ration supplemented with ammonium chloride (50-100 g/day/head), urea (30 g/day/head), fishmeal (35 g/day/head), algae () powder (50 g/day/head), humic acid (2.5 g/day/head), control group with only basal ration. The study was conducted for around 27 months and the data were recorded once in 2 weeks.
RESULTS
The results indicated a positive elevation in the physique of lambs with all tested additives, showing an affirmative insignia for lamb fattening. The growth parameters in terms of augmented length, height, and waist length of lambs' bodies amplified significantly with ammonium chloride and fishmeal supplement, while the other additives reported a non-significant increment. The feed consumption was significantly elevated for ammonium chloride, algae, and fishmeal supplementation, while humic acid was recorded the least. Concerning feed efficiency of young lambs, fish meal and ammonium chloride were reported best, followed by urea. In contrast, algae and humic acid exhibited a non-significant effect on feed efficiency.
CONCLUSION
This study exposed noteworthy influence on a lamb body's performance with the addition of fish meal and ammonium chloride in lamb rations, trailed by urea and algae.
PubMed: 36718317
DOI: 10.14202/vetworld.2022.2785-2794 -
Journal of Inorganic Biochemistry Jun 2023Antibiotics overuse and misuse increase the emergence of multidrug-resistant bacterial strains, which often leads to the failure of conventional antibiotic therapies....
Antibiotics overuse and misuse increase the emergence of multidrug-resistant bacterial strains, which often leads to the failure of conventional antibiotic therapies. Even worse, the tendency of bacteria to form biofilms further increases the therapeutic difficulty, because the extracellular matrix prevents the penetration of antibiotics and triggers bacterial tolerance. Therefore, developing novel antibacterial agents or therapeutic strategies with diverse antibacterial mechanisms and destruction of bacteria biofilm is a promising way to combat bacterial infections. In the present study, the combination of quaternary ammonium compound poly(diallyl dimethyl ammonium chloride) (PDDA) with Cu was screened out to fight common pathogenic Staphylococcus aureus (S. aureus) through multi-mechanisms. This combination appeared strong synergistic antibacterial activity, and the fractional inhibitory concentration index was as low as 0.032. The synergistic antibacterial mechanism involved the destruction of the membrane function, generation of intracellular reactive oxygen, and promotion more Cu into the cytoplasm. Further, the combination of PDDA and Cu reduced the extracellular polysaccharide matrix, meanwhile killing the bacteria embedded in the biofilm. The biocompatibility study in vitro revealed this combination exhibited low cytotoxicity and hemolysis ratio even at 8 times of minimum bactericidal concentration. This work provides a novel antibacterial agents combination with higher efficiency to fight planktonic and biofilm conditions of S. aureus.
Topics: Copper; Staphylococcus aureus; Quaternary Ammonium Compounds; Anti-Bacterial Agents; Bacteria; Biofilms; Microbial Sensitivity Tests; Methicillin-Resistant Staphylococcus aureus
PubMed: 36965431
DOI: 10.1016/j.jinorgbio.2023.112190 -
Environmental Science & Technology Jun 2022The interaction between water vapor and atmospheric aerosol leads to enhancement in aerosol water content, which facilitates haze development, but its concentrations,...
The interaction between water vapor and atmospheric aerosol leads to enhancement in aerosol water content, which facilitates haze development, but its concentrations, sources, and impacts remain largely unknown in polluted urban environments. Here, we show that the Indian capital, Delhi, which tops the list of polluted capital cities, also experiences the highest aerosol water yet reported worldwide. This high aerosol water promotes secondary formation of aerosols and worsens air pollution. We report that severe pollution events are commonly associated with high aerosol water which enhances light scattering and reduces visibility by 70%. Strong light scattering also suppresses the boundary layer height on winter mornings in Delhi, inhibiting dispersal of pollutants and further exacerbating morning pollution peaks. We provide evidence that ammonium chloride is the largest contributor to aerosol water in Delhi, making up 40% on average, and we highlight that regulation of chlorine-containing precursors should be considered in mitigation strategies.
Topics: Aerosols; Air Pollutants; Air Pollution; Ammonium Chloride; China; Environmental Monitoring; India; Particulate Matter; Seasons
PubMed: 35483018
DOI: 10.1021/acs.est.2c00650 -
Polymers Jul 2022Poly(3-methacrylamido propyl trimethyl ammonium chloride) (PMAPTAC) is a typical cationic water-soluble polyelectrolyte, which has been widely used in petroleum,...
Poly(3-methacrylamido propyl trimethyl ammonium chloride) (PMAPTAC) is a typical cationic water-soluble polyelectrolyte, which has been widely used in petroleum, papermaking, daily cosmetics and other fields in the form of an aqueous solution. However, the acid-base and thermal stability of PMAPTAC in aqueous solution have not been reported yet, which hinders its further application in high-temperature and acid-base environments. To address these deficiencies, the effects of temperature and pH of PMAPTAC with different intrinsic viscosities on its hydrolysis stability were investigated qualitatively and quantitatively, and the hydrolysis mechanism was studied. Firstly, the qualitative analysis showed that the apparent viscosity of the PMAPTAC solution decreased with hydrolysis time at different temperatures and pH. The higher the temperature and the lower the pH, the greater the viscosity loss of PMAPTAC. The quantitative analysis showed that the hydrolysis rate of the PMAPTAC sample solution increased with the increase in temperature and pH. In addition, the intrinsic viscosity of PMAPTAC samples had little effect on the hydrolytic stability of PMAPTAC. Secondly, by analyzing the viscosity curves at different pH and temperatures by Arrhenius analysis, the Arrhenius equations were found to be 1/τ = 200.34e^((-25.04)/RT), 1/τ = 9127.07e^((-38.90)/RT) and 1/τ = 4683.03e^((-39.89)/RT) for pH 3, pH 7 and pH 11, respectively. Thirdly, the hydrolysis rate of PDMC was the fastest under alkaline conditions. In addition, compared with PDMC, PMAPTAC had better hydrolysis stability under the same conditions. Finally, the mechanism of the hydrolyzed polymer was studied by FTIR and CNMR, which showed that the carbonyl group of PMAPTAC was hydrolyzed into a carboxyl group, and the small molecule (3-aminopropyl) trimethylammonium chloride was generated, while the ester group of PDMC was hydrolyzed into a carboxyl group, and choline chloride was released. The above results can provide a theoretical basis for the application of PMAPTAC in some high-temperature and acid-base environments.
PubMed: 35890587
DOI: 10.3390/polym14142811 -
Environmental Science and Pollution... Aug 2023Waste printed circuit boards (WPCBs) contain a plethora of valuable metals, considered an attractive secondary resource. In the current research, a hydrometallurgical...
Waste printed circuit boards (WPCBs) contain a plethora of valuable metals, considered an attractive secondary resource. In the current research, a hydrometallurgical process combined ammonia/ammonium chloride leaching and reduction (using L-ascorbic acid) to recover copper and its oxide (CuO) as nanosized particles from WPCBs was investigated. The results of leaching indicated that 96.7% of copper could be recovered at a temperature of 35 °C for a leaching duration of 2 h with ammonium chloride and ammonia concentration of 2 mol/L at a solid:liquid ratio of 1:10 g/cm. The synthesized particles exhibit spherical and distorted sphere morphology with average particle size of 460 nm and 50 nm for Cu and CuO NPs, respectively. The antibacterial activity of Cu, CuO, and a (1:1) blend of both (Cu/CuO) has been examined against five different bacterial and fungal strains. The highest zone of inhibition was measured as 21.2 mm for Cu NPs toward Escherichia coli and 16.7 mm for Cu/CuO blend toward Bacillus cereus bacteria. The highest zone of inhibition was measured as 13 mm and 13.8 mm for Cu/CuO blend toward Fusarium proliferatum and Penicillium verrucosum fungi. Cu/CuO blend showed notable photocatalytic activity towards Rhodamine B dye under visible light irradiation with 96% degradation rate within 120 min. Using the process developed in this study, copper and its oxide as nanoparticles can be produced from WPCBs and used for multifunctional applications.
Topics: Copper; Electronic Waste; Ammonia; Ammonium Chloride; Nanoparticles; Fungi; Anti-Bacterial Agents; Oxides; Metal Nanoparticles
PubMed: 37458881
DOI: 10.1007/s11356-023-28437-5 -
Materials (Basel, Switzerland) Sep 2021This article deals with cationization of cotton during mercerization and its effects on trichromatic vat dyeing. If cationization is carried out during the...
This article deals with cationization of cotton during mercerization and its effects on trichromatic vat dyeing. If cationization is carried out during the after-treatment, regardless of cotton pretreatment, the reaction takes place on the surface and blocks cellulose groups, subsequently resulting in uneven coloration. However, when cationization is carried out with an epihalohydrin during the mercerization process, new cellulose is formed in which the cationic compound is uniformly distributed and trapped between cellulose chains, resulting in uniform coloration after the dyeing process. The reaction time for the process during mercerization is 24 h, thus a more favorable process was researched. Based on electrokinetic analysis, it was found that 5 h was sufficient for the reaction with 3-chloro-2-hydroxypropyltrimethyl ammonium chloride (CHPTAC). The cationization of cotton contributed to the processes of vat dyeing. The change in charge upon cationization resulted in very high adsorption of vat-dye anions, indicating that ionic bonding occurred in addition to van der Waals forces. The color depth improved by more than 10 times. It should be emphasized that the colors with higher chroma and targeted color hue, especially in trichromatic dyeing, were obtained on cationized cotton, in contrast to standard cotton fabrics. The color differences obtained under the different light sources indicate the occurrence of metamerism. Considering the color fastness to laundering, vat-dyed cationized fabrics of all colors may be used in hospitals or other environments where high hygiene and oxidative bleaching are required.
PubMed: 34640128
DOI: 10.3390/ma14195731 -
Journal of Toxicology and Environmental... Jun 2022Quaternary ammonium compounds (QACs) or quats are a large class of antimicrobial chemicals used in households and institutions as sanitizers and disinfectants. These...
Quaternary ammonium compounds (QACs) or quats are a large class of antimicrobial chemicals used in households and institutions as sanitizers and disinfectants. These chemicals are utilized as food processing sanitizers, algicides, in the process of water treatment, and preservatives in cosmetics. The aim of this study was to determine an Adverse Outcome Pathway (AOP) whereby two widely used QACs, alkyl dimethyl benzyl ammonium chloride (ADBAC) and didecyl dimethyl ammonium chloride (DDAC), may result in respiratory tract and gastrointestinal tract effects. When inhaled or ingested, these QACs are incorporated into the epithelial cell membrane at the point of contact. With sufficient dosage, the epithelial membrane is disrupted, reducing its fluidity, and releasing cellular contents. Further, ADBAC and DDAC might disrupt mitochondrial functions leading to decreased ATP production. Both events might lead to cell death, either attributed to direct lysis, necrosis, or apoptosis. Pro-inflammatory mediators are recruited to the tissue, inducing inflammation, edema, and excess mucus production. The primary tissue-level adverse outcome is epithelial degeneration and dysplasia. Most important, no apparent metabolism or distribution is involved in QAC action. Based upon this knowledge, it is suggested to replace default Uncertainty Factors for risk assessments with a set of Data Derived Extrapolation Factors.
Topics: Adverse Outcome Pathways; Ammonium Chloride; Anti-Bacterial Agents; Anti-Infective Agents; Chlorides; Disinfectants; Quaternary Ammonium Compounds
PubMed: 35191814
DOI: 10.1080/15287394.2022.2037479