-
European Journal of Ophthalmology May 2022The aim of this study was to determine whether iris colour is related to the choroidal thickness of healthy individuals.
OBJECTIVE
The aim of this study was to determine whether iris colour is related to the choroidal thickness of healthy individuals.
METHODS
Healthy participants were divided into two groups. Group 1 had light-coloured eyes (blue and green), and group 2 had dark-coloured eyes (brown). The main outcome measures were iris thickness, subfoveal choroidal thickness and nasal and temporal choroidal thicknesses 500 µm away from the fovea.
RESULTS
Group 1 comprised 31 subjects with light-coloured eyes, and group 2 had 31 subjects with dark eyes. The mean ages of groups 1 and 2 were 26.7 ± 7.5 years and 24.1 ± 5.8 years, respectively ( = 0.14). The choroidal thicknesses of the subfoveal, nasal and temporal regions were 336.3 ± 52.1 µm, 321.9 ± 43.6 µm and 318.4 ± 49.2 µm, respectively, in group 1 and 396.5 ± 76.9 µm, 372 ± 79.3 µm and 379.6 ± 82.4 µm, respectively, in group 2. All the values in group 1 were statistically lower than those in group 2 ( = 0.001, = 0.001 and = 0.003, respectively). The iris thickness in group 1 (493.73 ± 95.44 µm) was thinner than in group 2 (524.61 ± 69.74 µm) but not statistically significant ( = 0.141).
CONCLUSION
The results showed that a thinner choroid can be seen in disease-free light-coloured eyes. The iris colour should be considered among the factors affecting the choroidal thickness, such as age, sex, race and refractive error.
Topics: Adult; Biometry; Choroid; Fovea Centralis; Humans; Refractive Errors; Tomography, Optical Coherence; Young Adult
PubMed: 34218695
DOI: 10.1177/11206721211029470 -
Therapeutic Advances in Ophthalmology 2022The distance between the optic disc center and the fovea is a biometric parameter; however, it is unclear whether DFD (disc-fovea distance) affects the choroidal...
BACKGROUND
The distance between the optic disc center and the fovea is a biometric parameter; however, it is unclear whether DFD (disc-fovea distance) affects the choroidal thickness.
OBJECTIVE
The aim of this study is to investigate the association between DFD and choroidal thickness.
DESIGN
This is a prospective, and cross-sectional study.
METHODS
Two hundred fifty eyes of 250 healthy participants were examined in terms of DFD, age, axial length, spherical equivalent, and choroidal thickness. Inclusion criteria included aged between 20-40 years, no posterior segment disorders, and participants with best-corrected visual acuity (10/10 according to Snellen's chart). Participants with high hypermetropia (>4 diopter) or myopia (>6 diopter) or any systemic disease likely to affect choroidal thickness were excluded. Choroidal thickness measurements were performed at subfoveal, 1.0 mm temporal, and 1.0 mm nasal using the enhanced-depth imaging optical coherence tomography.
RESULTS
The mean age of all the participants was 26.21 ± 5.73 years, mean DFD was 4634.29 ± 274.70 µm, mean axial length was 23.62 ± 0.83 mm, and mean spherical equivalent was -0.61 ± 1.06 diopter. The mean subfoveal, nasal, and temporal choroidal thicknesses were 388.73 ± 90.15 µm, 351.26 ± 88.09 µm, and 366.50 ± 79.56 µm, respectively. A negative correlation was found between subfoveal, nasal, and temporal choroidal thicknesses and axial length ( = -0.157, = 0.013; = -0.168, = 0.008; = -0.174, = 0.006, respectively). Insignificant correlation was found between choroidal thicknesses and spherical equivalent ( > 0.05). There was not a statistically significant correlation between DFD and subfoveal, nasal, and temporal choroidal thicknesses ( = -0.028, = 0.655; = 0.030, = 0.641; = -0.025, = 0.699, respectively). In addition, there was not a statistically significant correlation between age and choroidal thickness.
CONCLUSION
This study shows that DFD and spherical equivalent do not affect choroidal thickness; axial length negatively affects choroidal thickness. In addition, age does not affect choroidal thickness between 20 and 40 years.
PubMed: 35602660
DOI: 10.1177/25158414221096062 -
Journal of Ophthalmology 2021To compare the results and repeatability of the corneal thickness (CT) and epithelial thickness (ET) maps provided by Swept-Source-Optical Coherence Tomography with...
OBJECTIVE
To compare the results and repeatability of the corneal thickness (CT) and epithelial thickness (ET) maps provided by Swept-Source-Optical Coherence Tomography with those of Spectral-Domain-OCT in normal eyes.
METHODS
30 normal eyes of 30 patients were assessed by 3 trained operators with SS-OCT and SD-OCT.
RESULTS
The central and minimum ET obtained with both devices were correlated: central ET, = 0.86, < 0.05; minimum ET, = 0.72, < 0.05. Compared with SD-OCT, SS-OCT tended to underestimate these figures by 1.4 and 1.9 m on average. The central and minimum CT obtained with both devices were strongly correlated: central CT, = 0.994, < 0.05; minimum CT, = 0.995, < 0.05. SS-OCT tended to overestimate these figures by 11 and 14 m on average. Repeatability was good for both devices with a mean coefficient of variation of measurements <6% for ET and <2% for CT. Interoperator variability (standard deviation and COV) was significantly higher for SS-OCT than for SD-OCT for all local epithelial thicknesses and significantly lower for the central CT and several local corneal thicknesses, whereas no significant differences between both technologies were found for the central and minimum ET and the minimum CT.
CONCLUSION
SS-OCT and SD-OCT provide reproducible measurements of CT and ET in normal corneas with a strong correlation between both technologies. However, both technologies are not interchangeable when the main thickness parameters (i.e., central and minimum CT and minimum ET) are used for diagnosing early keratoconus or calculating the expected residual stromal bed thickness before corneal refractive surgery or anterior lamellar keratoplasty.
PubMed: 34650817
DOI: 10.1155/2021/3444083 -
Clinical and Experimental Dental... Dec 2020Creating a tooth-like appearance by use of dental ceramics is still a challenge. Opalescence is a unique property of dental enamel, attempted to be mimicked by dental...
OBJECTIVES
Creating a tooth-like appearance by use of dental ceramics is still a challenge. Opalescence is a unique property of dental enamel, attempted to be mimicked by dental restorative materials. This study aimed to assess the effect of ceramic thickness on opalescence.
MATERIALS AND METHODS
Twenty-four discs were fabricated of feldspathic ceramic, IPS e.max, zirconia and Enamic ceramics with 10 mm diameter and 0.5 and 1 mm thicknesses (n = 12). The opalescence of ceramic specimens was calculated by measuring the difference in yellow-blue axis (CIE ∆b*) and red-green axis (CIE ∆a*) between the transmitted and reflected spectra. One-way ANOVA was applied to compare the opalescence of different ceramic specimens with variable thicknesses at .05 level of significance.
RESULTS
The opalescence of feldspathic, IPS e.max, zirconia and Enamic ceramic specimens with 0.5 mm thickness was 1.06 ± 0.15, 3.39 ± 0.15, 1.98 ± 0.15 and 1.44 ± 0.15, respectively. By increasing the thickness to 1 mm, the opalescence of feldspathic, IPS e.max, zirconia and Enamic ceramics changed to 1.12 ± 0.15, 1.47 ± 0.15, 3.85 ± 0.15 and 2.00 ± 0.15, respectively. In all groups except for IPS e.max, the mean opalescence of 1-mm-thick specimens was higher than that of 0.5-mm-thick specimens.
CONCLUSION
Type and thickness of ceramic affect its opalescence. The opalescence of all ceramic specimens tested in this study with 0.5 and 1 mm thicknesses was lower than that of the enamel.
Topics: Ceramics; Dental Enamel; Dental Porcelain; Dental Restoration, Permanent; Humans; Iridescence; Materials Testing; Surface Properties; Zirconium
PubMed: 32902165
DOI: 10.1002/cre2.325 -
Journal of Ophthalmic & Vision Research 2020To investigate the effects of refraction on retinal thickness measurements at different locations and layers in healthy eyes of Saudi participants. (Review)
Review
PURPOSE
To investigate the effects of refraction on retinal thickness measurements at different locations and layers in healthy eyes of Saudi participants.
METHODS
Thirty-six randomly selected adults aged 27.0 5.7 years who attended a Riyadh hospital from 2016 to 2017 were categorized into three groups: non-myopic (spherical equivalent refraction [SER], +1.00 to -0.50 diopters [D]), low myopic (SER, -0.75 to -3.00D), and moderate to high myopic (SER -3.25D). Full, inner, and outer retinal thicknesses were measured at nine locations by spectral-domain stratus optical coherence tomography (Optovue Inc., Fremont, CA, USA) and were compared according to refractive group and sex.
RESULTS
The mean SERs for the non-myopia, low myopia, and moderate to high myopia groups were 0.2 0.6, -1.5 0.5, and -7.5 1.9 D, respectively. Refractive error, but not sex, had significant effects on the retinal layer thickness measurements at different locations ( 0.05). The parafoveal and outer retinal layers were significantly thicker than the perifoveal and inner retina layers in all groups ( 0.05). The full foveal thickness was higher and the full parafoveal and perifoveal regions were thinner in moderate to high myopic eyes than in the non-myopic eyes ( 0.05), but were similar to those in the low myopic eyes ( 0.05). The foveal thicknesses measured in the inner and outer layers of the retina were higher but the thicknesses measured at the inner and outer layers of the parafoveal and perifoveal regions were lower in moderate to high myopic eyes.
CONCLUSION
There were regional differences in the retinal layer thicknesses of healthy Saudi eyes, which was dependent on the central refractions. This is important when interpreting retinal nerve fiber layer thicknesses in myopia and disease management in Saudi participants.
PubMed: 32308952
DOI: 10.18502/jovr.v15i2.6735 -
Journal of Musculoskeletal & Neuronal... Jun 2023To evaluate the relationship between cartilage loss and differences in muscle thickness and/or leg length in poliomyelitis sequelae (PMS). Our study is the first to...
OBJECTIVES
To evaluate the relationship between cartilage loss and differences in muscle thickness and/or leg length in poliomyelitis sequelae (PMS). Our study is the first to evaluate the relationship between cartilage loss and both muscle atrophy and leg length discrepancy in the same population.
METHODS
37 patients with PMS and 38 healthy controls were included. Talar and distal femoral cartilage thicknesses and gastrocnemius medialis and quadriceps femoris muscle thicknesses were measured via ultrasound. Leg length differences and manual muscle strength were also evaluated.
RESULTS
The mean muscle thicknesses and cartilage thicknesses were thinner in the more affected legs than in the less affected legs in the patient group. All of the ultrasonographic measurements were thinner in the less affected legs of the patient group than in the right legs of the control group, except for the knee cartilage thicknesses. While there was a correlation between the cartilage thickness difference and the muscle thickness difference between the less and more affected legs in the patient group, there was no correlation between the cartilage thickness difference and leg length differences.
CONCLUSIONS
Patients with PMS are predisposed to osteoarthritis. Talar and knee cartilage thicknesses may be more associated with the muscle thickness than the leg length discrepancy in PMS.
Topics: Humans; Leg; Cartilage; Quadriceps Muscle; Lower Extremity; Poliomyelitis; Ultrasonography
PubMed: 37259663
DOI: No ID Found -
International Ophthalmology Dec 2021To comparatively analyze differences in macular choroidal thickness and volume in primary chronic angle-closure glaucoma (PACG) eyes. (Review)
Review
PURPOSE
To comparatively analyze differences in macular choroidal thickness and volume in primary chronic angle-closure glaucoma (PACG) eyes.
METHODS
Thirty-one PACG patients were sequentially selected for this case-control study. Thirty-one eyes with PACG were included in group A, 31 fellow eyes were included in group B, and group C included 67 normal eyes. Enhanced-depth imaging optical coherence tomography (EDI-OCT) was used to measure choroidal thickness and volume.
RESULTS
The choroidal thicknesses and volumes of the central subfield macula (CSM), nasal inner macula (NIM), temporal inner macula (TIM), inferior inner macula (IIM), temporal outer macula (TOM), inferior outer macula (IOM), and mean macula (MM) in group A were all higher than those in group C (P < 0.05). The choroidal thicknesses and volumes of the NIM, superior inner macula (SIM), IIM, nasal outer macula (NOM), and MM in group B were all higher than those in group C (P < 0.05). No statistically significant differences were found between groups A and B (P > 0.05). The choroidal thicknesses of different macular regions in group A were not correlated with the mean defect (MD).
CONCLUSION
Increased macular choroidal thickness may be a common anatomical characteristic of PACD eyes. Macular choroidal thickness is not a good marker for assessing PACG severity.
Topics: Case-Control Studies; Choroid; Glaucoma, Angle-Closure; Humans; Macula Lutea; Tomography, Optical Coherence
PubMed: 34333686
DOI: 10.1007/s10792-021-01988-7 -
Acta Stomatologica Croatica Mar 2022Dentin thickness in concave areas of the root creates risk for complications such as strip perforation during endodontic treatment. The study aims to examine dentin...
OBJECTIVES
Dentin thickness in concave areas of the root creates risk for complications such as strip perforation during endodontic treatment. The study aims to examine dentin thickness of the danger (DZ) and safety zone (SZ), canal configuration, and the presence of isthmus in the mesiobuccal root of maxillary molars.
MATERIAL AND METHODS
Cone-beam Computed Tomography (CBCT) images of 1251 teeth belonging to 642 patients were retrospectively reviewed. The dentin thicknesses at DZ and SZ in maxillary molars with one (MB) or two mesiobuccal canals (MB1, MB2) were measured at the 3 mm apical to the furcation level. Vertucci's canal configurations and the isthmus rate were recorded. The Chi-square test andThe Student's t-test were performed.
RESULTS
MB2 rate was higher in maxillary first molars (61.68%) than second molars (39.36%). Isthmus rates were 27.3% and 44.11% in first and second molars. DZ thickness was thinner than the dentin thickness in the SZ in both first and second molars with one or two mesial canals (p< 0.05). In teeth with single canal, the mean DZ thickness was 0.88mm. In teeth with two canals, the mean DZ thicknesses were 0.83mm and 0.80mm for MB1 and MB2 canals, respectively.
CONCLUSION
MB2 rate was higher in the first molar (61.68%), and the isthmus rate was higher in the second molar (44.11%). DZ and SZ were thinner in MB2 than in MB1 at the maxillary molars with two mesial canals. The results indicated that more conservative preparation must be applied to the MB2 canal in the maxillary molars.
PubMed: 35382485
DOI: 10.15644/asc56/1/6 -
Journal of the Mechanical Behavior of... Sep 2023This in-vitro study is planned to analyze the effect of different thicknesses of ceramic occlusal veneers and different surface treatments on fracture resistance.
OBJECTIVE
This in-vitro study is planned to analyze the effect of different thicknesses of ceramic occlusal veneers and different surface treatments on fracture resistance.
MATERIALS AND METHODS
A total of 48 sound mandibular molars are anatomically prepared from the occlusal surface with two different thicknesses (1.0 and 0.5 mm). CAD/CAM zirconia-reinforced glass ceramic blocks (Vita Suprinity) are used for fabricating occlusal veneers. The teeth are randomly divided into two primary groups A and B (n=24) according to occlusal veneer thickness. Each group is subdivided according to surface conditioning into three equal subgroups (n=8)-subgroup HF: etching with hydrofluoric acid and ceramic primer application; subgroup APF: etching with acidulated phosphate fluoride and ceramic primer application; subgroup EP: conditioning with etch and prime only. Dual-cure adhesive resin cement (Multilink Automix) is utilized to adhesively bond the veneers. All specimens are subjected to 240,000 cycles of dynamic load aging prior to the fracture resistance test. The fracture resistance is measured in Newton (N). The Failure mode patterns are analyzed and categorized using a scanning electron microscope (SEM). The results are analyzed using a two-way ANOVA with Bonferroni's Post-Hoc test, followed by a one-way ANOVA for each factor. That is in addition to one-way ANOVA for surface treatment under each thickness, each followed by Bonferroni's Post-Hoc test. Then, a T-test is used to compare the two thicknesses under each surface treatment. All tests are set at 0.05 significance level.
RESULTS
The two-way ANOVA test revealed that restoration thickness and surface treatment both significantly affect the fracture resistance values (p<0.05). The highest fracture resistance mean (2672±216N) is obtained from HF at 1.0 mm thickness, while the lowest mean (2104±299N) is obtained from APF at 0.5 mm thickness.
CONCLUSION
All test groups, regardless of thickness, demonstrated fracture resistance values that exceeded both normal and parafunctional bite forces. The veneers that bonded after hydrofluoric acid etching followed by ceramic primer application showed more favourable fracture patterns.
Topics: Humans; Ceramics; Dental Porcelain; Hydrofluoric Acid; Materials Testing; Molar; Resin Cements; Surface Properties
PubMed: 37473575
DOI: 10.1016/j.jmbbm.2023.106030 -
Healthcare (Basel, Switzerland) Jun 2022High frequency ultrasonography (ultrasound biomicroscopy; UBM) is an ophthalmic diagnostic tool that can be used to measure the depth of the anterior segment (ASD), the...
BACKGROUND
High frequency ultrasonography (ultrasound biomicroscopy; UBM) is an ophthalmic diagnostic tool that can be used to measure the depth of the anterior segment (ASD), the anterior chamber angle (ACA), as well as thicknesses of the iris and the ciliary body (CB).
METHODS
The anterior segment dimensions and thicknesses were measured by Sonomed 35-MHz.
RESULTS
Measurements for 95 eyes from 52 adults were analyzed. The mean and median ASD and ACA were 2.91, 2.92 ± 0.41 mm and 34.1, 34.3 ± 12.1 degrees, respectively. The angle superiorly was wider than inferiorly ( = 0.04). At the root of the iris, the mid of the iris, and the juxtapupillary edge of the iris, the iris thicknesses (median, mean) were 0.40, 0.41 ± 0.1, 0.50, 0.51 ± 0.1, and 0.70, 0.71 ± 0.1 mm, respectively. The thicknesses of CB and CB together with the ciliary processes (median, mean), were 0.70, 0.71 ± 0.15 mm and 1.36, 1.41 ± 0.15 mm, respectively. The upper quadrant of both the iris and the CB was significantly thicker than the lower quadrant ( = 0.04).
CONCLUSIONS
Our biometric measurements for the anterior segment can be used as normative data for anterior segment depth and angle and iris and ciliary body thickness in normal eyes.
PubMed: 35885715
DOI: 10.3390/healthcare10071188