-
Nanomaterials (Basel, Switzerland) Sep 2021Composite membranes play a very important role in the separation, concentration, and purification processes, but especially in membrane reactors and membrane...
Composite membranes play a very important role in the separation, concentration, and purification processes, but especially in membrane reactors and membrane bioreactors. The development of composite membranes has gained momentum especially through the involvement of various nanoparticles, polymeric, oxide, or metal, that have contributed to increasing their reactivity and selectivity. This paper presents the preparation and characterization of an active metal nanoparticle-support polymer type composite membrane, based on osmium nanoparticles obtained in situ on a polypropylene hollow fiber membrane. Osmium nanoparticles are generated from a solution of osmium tetroxide in butyl alcohol by reduction with molecular hydrogen in a contactor with a polypropylene membrane. The composite osmium-polypropylene hollow fiber obtained membranes (Os-PPM) were characterized from the morphological and structural points of view: scanning electron microscopy (SEM), high resolution SEM (HR-SEM), energy dispersive spectroscopy analysis (EDAX), X-ray diffraction analysis (XRD), Fourier transform Infrared (FTIR) spectroscopy, thermal gravimetric analysis, and differential scanning calorimetry (TGA, DSC). The process performance was tested in a redox process of nitrophenol and 10-undecylenic (10-undecenoic) acid, as a target substance of biological or biomedical interest, in solutions of lower aliphatic alcohols in a membrane contactor with a prepared composite membrane. The characteristics of osmium nanoparticles-polypropylene hollow fiber membranes open the way to biological and biotechnological applications. These membranes do not contaminate the working environment, operate at relatively low temperatures, provide a large contact area between reactants, allow successive oxidation and reduction operations in the same module, and help to recover the reaction mass by ultrafiltration. The results obtained show that the osmium-polypropylene composite membrane allows the reduction of nitrophenol or the oxidation of 10-undecylenic acid, the conversion depending on the concentration in the lower aliphatic alcohol, the nature of the lower aliphatic alcohol, and the oxidant or reducing flow through the membrane contactor.
PubMed: 34684968
DOI: 10.3390/nano11102526 -
Scientific Reports Jul 2022Biotin ligases have been developed as proximity biotinylation enzymes for analyses of the interactome. However, there has been no report on the application of proximity...
Biotin ligases have been developed as proximity biotinylation enzymes for analyses of the interactome. However, there has been no report on the application of proximity labeling for in-resin correlative light-electron microscopy of Epon-embedded cells. In this study, we established a proximity-labeled in-resin CLEM of Epon-embedded cells using miniTurbo, a biotin ligase. Biotinylation by miniTurbo was observed in cells within 10 min following the addition of biotin to the medium. Using fluorophore-conjugated streptavidin, intracellular biotinylated proteins were labeled after fixation of cells with a mixture of paraformaldehyde and glutaraldehyde. Fluorescence of these proteins was resistant to osmium tetroxide staining and was detected in 100-nm ultrathin sections of Epon-embedded cells. Ultrastructures of organelles were preserved well in the same sections. Fluorescence in sections was about 14-fold brighter than that in the sections of Epon-embedded cells expressing mCherry2 and was detectable for 14 days. When mitochondria-localized miniTurbo was expressed in the cells, mitochondria-like fluorescent signals were detected in the sections, and ultrastructures of mitochondria were observed as fluorescence-positive structures in the same sections by scanning electron microscopy. Proximity labeling using miniTurbo led to more stable and brighter fluorescent signals in the ultrathin sections of Epon-embedded cells, resulting in better performance of in-resin CLEM.
Topics: Biotin; Microscopy, Electron, Scanning; Organelles; Osmium Tetroxide; Resins, Plant; Staining and Labeling
PubMed: 35778550
DOI: 10.1038/s41598-022-15438-6 -
Biomedical Research (Tokyo, Japan) 2020The osmium maceration method is a powerful technique for observing the three-dimensional ultrastructure of cellular organelles by scanning electron microscopy. In the...
The osmium maceration method is a powerful technique for observing the three-dimensional ultrastructure of cellular organelles by scanning electron microscopy. In the conventional osmium maceration method, tissues are immersed in a diluted osmium tetroxide solution for several days at 20°C to remove soluble cytosolic proteins from the freeze-cracked surface of cells, and the optimal duration of this process is dependent on the cell type. To improve the efficiency of the osmium maceration procedure, we have examined systematically the relationship between the reaction temperature and time of the osmium maceration procedure. Treatment at temperatures higher than 20°C drastically shortened the time required to remove cytosolic proteins from the freeze-cracked surface of specimens with optimal durations for the osmium maceration of hepatocytes at 30, 40, 50 and 60°C being 30, 15, 5 and 1 h, respectively. Considering the stability and reproducibility of the macerated specimens, we concluded that the most appropriate temperature was 30 to 40°C. This rapid osmium maceration procedure was used successfully to observe the 3D ultrastructure of Purkinje cells in the cerebellum and proximal convoluted tubule cells in the kidney. This simple and reproducible rapid osmium maceration protocol should find wide appeal for the 3D analysis of cellular organelles in various cell types.
Topics: Animals; Cryopreservation; Cryoprotective Agents; Dimethyl Sulfoxide; Formaldehyde; Glutaral; Hepatocytes; Liver; Male; Microscopy, Electron, Scanning; Osmium Tetroxide; Polymers; Rats; Rats, Wistar; Temperature; Time Factors; Tissue Fixation
PubMed: 32801265
DOI: 10.2220/biomedres.41.161 -
Heliyon Jun 2023In-resin CLEM (Correlative Light and Electron Microscopy) of Epon-embedded cells involves correlating fluorescence microscopy with electron microscopy in the same...
In-resin CLEM (Correlative Light and Electron Microscopy) of Epon-embedded cells involves correlating fluorescence microscopy with electron microscopy in the same Epon-embedded ultrathin section. This method offers the advantage of high positional accuracy compared to standard CLEM. However, it requires the expression of recombinant proteins. In order to detect the localization of endogenous target(s) and their localized ultrastructures of Epon-embedded samples using in-resin CLEM, we investigated whether immunological and affinity-labeling using fluorescent dyes applied to in-resin CLEM of Epon-embedded cells. The orange fluorescent (λ ∼550 nm) and far-red (λ ∼650 nm) fluorescent dyes examined maintained a sufficient level of fluorescent intensity after staining with osmium tetroxide and subsequent dehydration treatment with ethanol. Immunological in-resin CLEM of mitochondria and the Golgi apparatus was achieved using anti-TOM20, anti-GM130 antibodies, and fluorescent dyes. Two-color in-resin CLEM revealed that wheat germ agglutinin-puncta showed the ultrastructures of multivesicular body-like structures. Finally, taking the advantage of high positional accuracy, volume in-resin CLEM of mitochondria in the semi-thin section (2 μm thick) of Epon-embedded cells was performed by focused ion beam scanning electron microscopy. These results suggested that the application of immunological reaction and affinity-labeling with fluorescent dyes to in-resin CLEM of Epon-embedded cells is suitable for analyzing the localization of endogenous targets and their ultrastructures by scanning and transmission electron microscopy.
PubMed: 37389060
DOI: 10.1016/j.heliyon.2023.e17394 -
Journal of Visualized Experiments : JoVE Jan 2024Correlative light and electron microscopy (CLEM) is a comprehensive microscopy that combines the localization information provided by fluorescence microscopy (FM) and...
Correlative light and electron microscopy (CLEM) is a comprehensive microscopy that combines the localization information provided by fluorescence microscopy (FM) and the context of cellular ultrastructure acquired by electron microscopy (EM). CLEM is a trade-off between fluorescence and ultrastructure, and usually, ultrastructure compromises fluorescence. Compared with other hydrophilic embedding resins, such as glycidyl methacrylate, HM20, or K4M, Epon is superior in ultrastructure preservation and sectioning properties. Previously, we had demonstrated that mEosEM can survive osmium tetroxide fixation and Epon embedding. Using mEosEM, we achieved, for the first time, Epon post embedding CLEM, which maintains the fluorescence and the ultrastructure simultaneously. Here, we provide step-by-step details about the EM sample preparation, the FM imaging, the EM imaging, and the image alignment. We also improve the procedures for identifying the same cell imaged by FM imaging during the EM imaging and detail the registration between the FM and EM images. We believe one can easily achieve Epon post embedding correlative light and electron microscopy following this new protocol in traditional EM facilities.
Topics: Microscopy, Electron; Microscopy, Fluorescence
PubMed: 38284521
DOI: 10.3791/66141 -
Brazilian Journal of Otorhinolaryngology 2020The use of electron microscopy in the study of the inner ear has allowed us to observe minute details of the hair cells, especially in ototoxicity studies; however, the...
INTRODUCTION
The use of electron microscopy in the study of the inner ear has allowed us to observe minute details of the hair cells, especially in ototoxicity studies; however, the preparation of this material is a difficult and delicate task. In an attempt to simplify the handling of these materials, two agents, toluidine blue and ethylenediamine tetra-acetic acid were tested, in addition to the elimination of osmium tetroxide during the preparation of albino guinea pig cochleae. We also tested the applicability of these methodologies in an ototoxicity protocol.
OBJECTIVE
To verify the quality of the images obtained with and without the use of ethylenediamine tetra-acetic acid, toluidine blue and osmium tetroxide in the preparation of cochleae of albino guinea pigs for the scanning electron microscopy.
METHODS
Three groups of cochleae were used. In Group 1, 10 cochleae were prepared with the usual methodology, dissecting the optical capsule without decalcification and using osmium tetroxide as a post-fixative agent. In Group 2, we prepared 10 cochleae decalcified with ethylenediamine tetra-acetic acid, injecting toluidine blue in the endolymphatic space to facilitate the identification of the organ of Corti. In Group 3, we used 4 cochleae of guinea pigs that received 3 doses of cisplatin (7.5mg/kg, D1-D5-D6), two prepared according to the methodology used in Group 1 and two with that used in Group 2. Scanning electron microscopy images were obtained from the organ of Corti region of the basal turn of each cochlea.
RESULTS
The organ of Corti was more easily identified with the use of toluidine blue. The dissection of the cochlea was more accurate in the decalcified cochleae. The quality of the images and the preservation of the organ of Corti obtained with the two methodologies were similar.
CONCLUSION
The proposed modifications resulted in images of similar quality as those observed using the traditional methodology.
Topics: Animals; Cisplatin; Cochlea; Edetic Acid; Female; Guinea Pigs; Hair Cells, Auditory; Microscopy, Electron, Scanning; Organ of Corti; Osmium Tetroxide; Tolonium Chloride
PubMed: 30797727
DOI: 10.1016/j.bjorl.2018.11.008 -
Generation and characterization of two strains of transgene mice expressing chimeric MiniSOG-MusPrP.Journal of Neuroscience Methods Jul 2020Although the presences of scrapie associated fibril in the brain tissues is a ultrastructural hallmark for prion diseases, the exact morphological structure of prion...
BACKGROUND
Although the presences of scrapie associated fibril in the brain tissues is a ultrastructural hallmark for prion diseases, the exact morphological structure of prion during the progression of the disease is still unclear. The host prion protein (PrP) is encoded by PrP gene (PRNP) locating on the chromosome 20 in human and the chromosome 2 in mouse. Recently, a novel correlative light and electron microscopy with Mini Singlet Oxygen Generator (miniSOG) was generated. MiniSOG, a small protein of 106 amino acids, can absorb blue light and emit green fluorescence that is detectable under the fluorescence microscope. MiniSOG can also partially catalyze the polymerization of DAB to form black stained structures in the presence of osmium tetroxide, which is able to be observed under transmission electron microscope.
NEW METHODS
Two kinds of miniSOG-PrP expressing recombinant plasmids were generated. Correlative photooxidation and transmission electron microscope were used to detect these plasmids. The plasmids were microinjected into fertilized FVB/NJ eggs and Tg mice expressing miniSOG-PrP fusion proteins were selected after successive bred withPRNP KO Tg mice.
RESULTS
Those two strains of Tg mice, Tg and Tg, developed normally and maintained healthy without detectable abnormality after one-year observation. Western blots and immunohistochemical assays with PrP- and miniSOG-specific antibodies confirmed that the chimeric miniSOG-PrP proteins were expressed in the brain tissues of Tg mice. Digital PCR assays proposed that the copy numbers of the inserted external gene in Tg and Tg were 2 and 12, respectively.
COMPARISON WITH EXISTING METHOD(S)
Compared with GFP tag miniSOG is significantly smaller, which makes it easy be operated experimentally and possibly has less influence on the biological function of the labeled protein. Additionally, GFP tag is an ideal marker for immunofluorescent assays, but may not be suitable for ultrastructural assays for prion morphology.
CONCLUSION
Those Tg mice may supply novel and useful experimental animals for further study on the potential morphological structure formation and deposits of prion in the brain tissues during prion infection.
Topics: Animals; Blotting, Western; Mice; Mice, Transgenic; Prions; Recombinant Proteins; Transgenes
PubMed: 32416277
DOI: 10.1016/j.jneumeth.2020.108764 -
Biology Jan 2021Several imaging methodologies have been used in biofilm studies, contributing to deepening the knowledge on their structure. This review illustrates the most widely used... (Review)
Review
Several imaging methodologies have been used in biofilm studies, contributing to deepening the knowledge on their structure. This review illustrates the most widely used microscopy techniques in biofilm investigations, focusing on traditional and innovative scanning electron microscopy techniques such as scanning electron microscopy (SEM), variable pressure SEM (VP-SEM), environmental SEM (ESEM), and the more recent ambiental SEM (ASEM), ending with the cutting edge Cryo-SEM and focused ion beam SEM (FIB SEM), highlighting the pros and cons of several methods with particular emphasis on conventional SEM and VP-SEM. As each technique has its own advantages and disadvantages, the choice of the most appropriate method must be done carefully, based on the specific aim of the study. The evaluation of the drug effects on biofilm requires imaging methods that show the most detailed ultrastructural features of the biofilm. In this kind of research, the use of scanning electron microscopy with customized protocols such as osmium tetroxide (OsO), ruthenium red (RR), tannic acid (TA) staining, and ionic liquid (IL) treatment is unrivalled for its image quality, magnification, resolution, minimal sample loss, and actual sample structure preservation. The combined use of innovative SEM protocols and 3-D image analysis software will allow for quantitative data from SEM images to be extracted; in this way, data from images of samples that have undergone different antibiofilm treatments can be compared.
PubMed: 33445707
DOI: 10.3390/biology10010051 -
Visualization of cytoplasmic organelles via in-resin CLEM using an osmium-resistant far-red protein.Scientific Reports Jul 2020Post-fixation with osmium tetroxide staining and the embedding of Epon are robust and essential treatments that are used to preserve and visualize intracellular...
Post-fixation with osmium tetroxide staining and the embedding of Epon are robust and essential treatments that are used to preserve and visualize intracellular membranous structures during electron microscopic analyses. These treatments, however, can significantly diminish the fluorescent intensity of most fluorescent proteins in cells, which creates an obstacle for the in-resin correlative light-electron microscopy (CLEM) of Epon-embedded cells. In this study, we used a far-red fluorescent protein that retains fluorescence after osmium staining and Epon embedding to perform an in-resin CLEM of Epon-embedded samples. The fluorescence of this protein was detected in 100 nm thin sections of the cells in Epon-embedded samples after fixation with 2.5% glutaraldehyde and post-fixation with 1% osmium tetroxide. We performed in-resin CLEM of the mitochondria in Epon-embedded cells using a mitochondria-localized fluorescent protein. Using this protein, we achieved in-resin CLEM of the Golgi apparatus and the endoplasmic reticulum in thin sections of the cells in Epon-embedded samples. To our knowledge, this is the first reported use of a far-red fluorescent protein retains its fluorescence after osmium staining and Epon-embedding, and it represents the first achievement of in-resin CLEM of both the Golgi apparatus and the endoplasmic reticulum in Epon-embedded samples.
Topics: Animals; COS Cells; Chlorocebus aethiops; Endoplasmic Reticulum; Fluorescence; Fluorescent Dyes; Golgi Apparatus; HEK293 Cells; HeLa Cells; Humans; Luminescent Proteins; Mitochondria; Osmium Tetroxide; Staining and Labeling; Red Fluorescent Protein
PubMed: 32647231
DOI: 10.1038/s41598-020-68191-z -
Beilstein Journal of Nanotechnology 2016Osmium tetroxide 2,2'-bipyridine (OsBp) is known to react with pyrimidines in ssDNA and preferentially label deoxythymine (T) over deoxycytosine (C). The product,...
Osmium tetroxide 2,2'-bipyridine (OsBp) is known to react with pyrimidines in ssDNA and preferentially label deoxythymine (T) over deoxycytosine (C). The product, osmylated DNA, was proposed as a surrogate for nanopore-based DNA sequencing due to OsBp's "perfect" label attributes. Osmylated deoxyoligos translocate unassisted and measurably slow via sub-2 nm SiN solid-state nanopores, as well as via the alpha-hemolysin (α-HL) pore. Both nanopores discriminate clearly between osmylated and intact nucleobase; α-HL was also shown to discriminate between osmylated T and osmylated C. Experiments presented here confirm that the kinetics of osmylation are comparable for short oligos and long ssDNA and show that pyrimidine osmylation is practically complete in two hours at room temperature with less than 15 mM OsBp. Under the proposed labeling conditions: deoxyoligo backbone degradation measures less than 1/1,000,000; false positives such as osmylated deoxyadenine (A) and osmylated deoxyguanine (G) measure less than 1/100,000; false negatives, i.e., unosmylated C measure less than 1/10,000; and unosmylated T must measure substantially lower than 1/10,000 due to the 27-fold higher reactivity of T compared to C. However, osmylated C undergoes degradation that amounts to about 1-2% for the duration of the labeling protocol. This degradation may be further characterized, possibly suppressed, and the properties of the degradation products via nanopore translocation can be evaluated to assure base calling quality in a DNA sequencing effort.
PubMed: 27826518
DOI: 10.3762/bjnano.7.135