-
Journal of Surgical Oncology Sep 2023Percutaneous pelvic stabilization is an emerging technique that provides mechanical stability to pathologic fractures of the pelvic ring and acetabulum. Variability... (Review)
Review
Percutaneous pelvic stabilization is an emerging technique that provides mechanical stability to pathologic fractures of the pelvic ring and acetabulum. Variability exists in procedural technique among institutions; however, early case series consistently demonstrate an acceptable complication profile and significant improvement in patients' pain and function. This minimally invasive approach is less morbid than traditional, open acetabular and pelvic reconstructions. Therefore, this procedure is an encouraging palliative intervention for a growing patient population in need.
Topics: Humans; Fractures, Bone; Fracture Fixation, Internal; Bone Screws; Acetabulum; Bone Diseases; Pelvic Bones
PubMed: 37537985
DOI: 10.1002/jso.27383 -
The Journal of International Medical... Jun 2021The number of patients with metastatic bone tumors of the pelvis (MBTP) has increased, and the risk of metastasis and recurrence in the pelvic bones is difficult to...
OBJECTIVE
The number of patients with metastatic bone tumors of the pelvis (MBTP) has increased, and the risk of metastasis and recurrence in the pelvic bones is difficult to assess. Therefore, we investigated the clinical features and oncological outcomes of patients with MBTP.
METHODS
We analyzed the clinical features and oncological outcomes of MBTP in 72 patients (42 men, 30 women; mean age, 50.5 years) from 2008 to 2017. Recurrence in the pelvic bones and survival rates were analyzed with regard to patients' potential contributing factors.
RESULTS
Enneking region I was the area most commonly containing MBTP (47.3%). Low- and high-grade tumors were identified in 40 and 32 patients, respectively. The most common pathological type was adenomatous carcinoma (34.7%), and the most common primary lesion was lung cancer (20.8%). The 3-year overall recurrence rate within the pelvic bones was 34.7%, and the 5-year overall survival rate was 29.2%.
CONCLUSION
Patients with MBTP have a high risk of recurrence in the pelvic bones and poor survival after multimodal treatment. Pelvic recurrence might be affected by the metastatic involvement, tumor grade, surgical margins, and type of surgery, whereas the survival rate tends to be associated with the tumor grade.
Topics: Bone Neoplasms; Female; Humans; Male; Middle Aged; Neoplasm Recurrence, Local; Pelvic Bones; Pelvic Neoplasms; Pelvis; Retrospective Studies
PubMed: 34154434
DOI: 10.1177/03000605211013152 -
The Journal of the American Academy of... Sep 2023Pelvic ring injuries and acetabular fractures can be complex and challenging to treat. Orthopaedic trauma surgeons scrutinize pelvic radiographs and accompanying CT...
Pelvic ring injuries and acetabular fractures can be complex and challenging to treat. Orthopaedic trauma surgeons scrutinize pelvic radiographs and accompanying CT images for the osseous details that help create a thorough patient-specific preoperative plan. While the osseous details are incredibly important, the surrounding soft-tissue structures are equally as critical and can have a tremendous effect on both the patient and the surgeon. These findings may change surgery timing, dictate the need for additional surgeons or multidisciplinary teams, and determine the treatment sequence. The structures and potential clinical findings reviewed and demonstrated through example images should be sought out during physical examination and correlative preoperative imaging review. Combining all the available osseous and nonosseous information with a detailed approach helps the surgeon predict potential pitfalls and adjust surgical plans before incision. Maximizing the accuracy of the preoperative planning process can streamline treatment algorithm development and ultimately contribute to the best possible clinical patient outcome.
Topics: Humans; Fractures, Bone; Acetabulum; Fracture Fixation, Internal; Pelvis; Radiography; Hip Fractures; Pelvic Bones
PubMed: 37450836
DOI: 10.5435/JAAOS-D-23-00190 -
JBJS Reviews Mar 2017
Review
Topics: Aged; Aged, 80 and over; Female; Fracture Fixation; Fractures, Bone; Frail Elderly; Frailty; Humans; Male; Pelvic Bones
PubMed: 28359073
DOI: 10.2106/JBJS.RVW.16.00057 -
Medical Engineering & Physics Nov 2023Endoprosthetic reconstruction of the pelvic bone using 3D-printed, custom-made implants has delivered early load-bearing ability and good functional outcomes in the...
Endoprosthetic reconstruction of the pelvic bone using 3D-printed, custom-made implants has delivered early load-bearing ability and good functional outcomes in the short term to individuals with pelvic sarcoma. However, excessive stress-shielding and subsequent resorption of peri‑prosthetic bone can imperil the long-term stability of such implants. To evaluate the stress-shielding performance of pelvic prostheses, we developed a sequential modeling scheme using subject-specific finite element models of the pelvic bone-implant complex and personalized neuromusculoskeletal models for pre- and post-surgery walking. A new topology optimization approach is introduced for the stress-shielding resistant (SSR) design of custom pelvic prostheses, which uses 3D-printable porous lattice structures. The SSR optimization was applied to a typical pelvic prosthesis to reconstruct a type II+III bone resection. The stress-shielding performance of the optimized implant based on the SSR approach was compared against the conventional optimization. The volume of the peri‑prosthetic bone predicted to undergo resorption post-surgery decreased from 44 to 18%. This improvement in stress-shielding resistance was achieved without compromising the structural integrity of the prosthesis. The SSR design approach has the potential to improve the long-term stability of custom-made pelvic prostheses.
Topics: Humans; Prosthesis Design; Prostheses and Implants; Pelvic Bones; Pelvis; Artificial Limbs; Finite Element Analysis
PubMed: 37985018
DOI: 10.1016/j.medengphy.2023.104012 -
European Journal of Orthopaedic Surgery... Feb 2021Although the second (S2) and third (S3) sacral segments have been established as potential osseous fixation pathways for screw fixation, the S2 body has been...
BACKGROUND
Although the second (S2) and third (S3) sacral segments have been established as potential osseous fixation pathways for screw fixation, the S2 body has been demonstrated to have inferior bone density when compared to the body of the first (S1) sacral segment. Caution regarding the use of iliosacral screws at this level has been advised as a result. As transiliac-transsacral screws traverse the lateral cortices of the posterior pelvis, they may be relying on bone with superior density for purchase, which could obviate this concern. The objective of this study was to compare the bone density of the posterior ilium and sacroiliac joint to that of the sacral body at the first (S1), second (S2), and third (S3) sacral levels.
MATERIALS AND METHODS
A retrospective case series was performed, reviewing the CT scans of 100 patients without prior pelvic trauma. Each CT was confirmed to have available osseous fixation pathways at the first (S1), second (S2), and third (S3) sacral segments. The bone density of the posterior ilium/sacroiliac joint (PISJ) and sacral body (SB) was measured using the embedded standardized Hounsfield units (HU) tool at each sacral level.
RESULTS
The average S2 PISJ bone density (320.1) was significantly higher than the S1 (286.5) and S3 (278.9) PISJ (p < 0.0001) and S1 and S3 PISJ was not statistically different. The S1 sacral body bone density (231.1) was significantly higher than the S2 (182.1) and S3 (126.8) bone density (p < 0.0001). The PISJ bone density is greater than the sacral body at every sacral level (p < 0.0001).
CONCLUSION
The S2 PISJ bone density is significantly greater than S1. The S1, S2, and S3 PISJ bone density is greater than the sacral body at all sacral levels, and the S1 body has higher bone density than the S2 and S3 bodies. These differences in bone density may have implications for the stability of posterior pelvic ring fixation constructs with regard to screw purchase.
LEVEL OF EVIDENCE
Level III-Case cohort series.
Topics: Bone Density; Bone Screws; Fracture Fixation, Internal; Fractures, Bone; Humans; Ilium; Pelvic Bones; Pelvis; Retrospective Studies; Sacrum
PubMed: 32902718
DOI: 10.1007/s00590-020-02782-4 -
The Orthopedic Clinics of North America Jul 2016High-energy pelvic ring injuries can represent life-threatening injuries in the polytraumatized patient, particularly when presenting with hemodynamic instability. These... (Review)
Review
High-energy pelvic ring injuries can represent life-threatening injuries in the polytraumatized patient, particularly when presenting with hemodynamic instability. These injuries mandate a systematic multidisciplinary approach to evaluation, and timely intervention to address hemorrhage while concomitantly addressing mechanical instability. These pelvic injuries are associated with potentially lethal hemorrhage originating from venous, arterial, and osseous sources. A thorough understanding of anatomy, radiographic findings, and initial physical examination can alert one to the presence of pelvic instability necessitating emergent treatment. The focus is on hemorrhage control, using techniques for skeletal stabilization, angiography, and open procedures to decrease mortality in this high-risk patient population.
Topics: Angiography; Fractures, Bone; Hemodynamics; Hemorrhage; Humans; Multiple Trauma; Pelvic Bones
PubMed: 27241378
DOI: 10.1016/j.ocl.2016.03.009 -
Biological Trace Element Research Jun 2016Physiochemical analysis of bones affected with osteoarthritis (OA) can be used to better understand the etiology of this disease. We investigated the percentage of... (Comparative Study)
Comparative Study
Physiochemical analysis of bones affected with osteoarthritis (OA) can be used to better understand the etiology of this disease. We investigated the percentage of chemical elements in canine pelvic bone affected with varying degrees of OA using a handheld X-ray fluorescence (XRF) analyzer that discriminates magnesium (Mg(12)) through bismuth (Bi(83)). A total of 45 pelvic bones, including both ilium and subchondral acetabular bone plates, were categorized as normal (n = 20), mild grade OA (n = 5), moderate grade OA (n = 15), and severe grade OA (n = 5). In normal pelvic, seven elements (P, Ca, Mn, Ag, Cd, Sn, and Sb) differed (p < 0.005) in percentage between ilium and acetabulum. Comparisons among the four OA groups found Mn and Fe to be highest in severe grades (p < 0.05) in both ilium and acetabulum. Three heavy metals (Ag, Sn, and Sb) were detected in high percentages (p < 0.05) in the severe OA group in the acetabulum, but in ilium only Sn was high (p < 0.05) in severe OA. In conclusion, the percentages of several elements differed between pelvic types in dogs, and also with increasing severity of OA. The finding of high Mn and Fe in severe grade OA bone suggests these two elements may be useful in future studies of the etiology and pathophysiology of OA.
Topics: Animals; Case-Control Studies; Dogs; Female; Male; Metals, Heavy; Osteoarthritis; Pelvic Bones
PubMed: 26537116
DOI: 10.1007/s12011-015-0556-4 -
Der Unfallchirurg Jun 2019Fragility fractures of the pelvis are increasing in frequency. In most cases patients suffer a minor injury, have intense pain in the pelvic region and impaired...
Fragility fractures of the pelvis are increasing in frequency. In most cases patients suffer a minor injury, have intense pain in the pelvic region and impaired mobility. The new fragility fractures of the pelvis (FFP) classification distinguishes between four types with increasing instability. The FFP types I and II are treated conservatively. For FFP types III and IV and type II with unsuccessful conservative treatment, minimally invasive stabilizing techniques are recommended. Both the posterior and anterior pelvic ring must be stabilized. Alternative techniques for dorsal stabilization are iliosacral screw and transsacral bar osteosynthesis, transiliac internal fixator and lumbopelvic fixation. External fixation, retrograde transpubic screw fixation, anterior internal fixation and plate and screw osteosynthesis are alternatives for the anterior pelvic ring. Treatment of fragility fractures of the pelvis should be carried out as part of an orthogeriatric co-management.
Topics: Fracture Fixation, Internal; Fractures, Bone; Humans; Osteoporotic Fractures; Pelvic Bones
PubMed: 30980097
DOI: 10.1007/s00113-019-0643-7 -
Medicine Jan 2021Tomoscintigraphic reconstruction in nuclear medicine assumes that the distribution of the tracer is unchanged in the volume of interest throughout the duration of the...
Tomoscintigraphic reconstruction in nuclear medicine assumes that the distribution of the tracer is unchanged in the volume of interest throughout the duration of the acquisition. This condition is however not met in early-phase bone scintigraphy and early-phase pelvic SPECT may display helical artifacts due to the filling of the bladder. Those artifacts may hamper proper interpretation of surrounding bone areas. The aim of this study was to construct a 4D digital pelvic phantom to simulate different acquisition protocols and optimize the acquisition.A 4D digital pelvic phantom was generated with a dynamic component consisting in an expanding bladder with 2 ureters and a static part consisting in the 2 kidneys, bone structures, and soft tissues. Projection data were obtained using an attenuated Radon transform function. Four acquisitions protocols were tested: 32 projections of 16 seconds (32-16-1), 32 projections of 8 seconds (32-8-1), 2 consecutive SPECT of 32 projections of 4 seconds (32-4-2) and 2 consecutive SPECT of 16 projections of 8 seconds (16-8-2). The optimal protocol was then tested on one patient.The amplitude of the artifacts was reduced with the 32-8-1, 32-4-2, and 16-8-2 protocols. The 16-8-2 protocol had the highest signal to noise ratio among those 3 protocols. The bladder artifact was visually markedly reduced on the patient acquisition with a 16-8-2 protocol.Two successive early-phase bone SPECT, with a lower number of projection than the usual protocol reduce the impact of the helical artifacts around the bladder.
Topics: Artifacts; Humans; Image Processing, Computer-Assisted; Pelvic Bones; Phantoms, Imaging; Quality Improvement; Tomography, Emission-Computed; Urinary Bladder
PubMed: 33530260
DOI: 10.1097/MD.0000000000024473