-
International Journal of Biological... Jan 2020The purpose of this study was to evaluate the effect of plasticizer type (glycerol, PEG-400, and sorbitol) and concentration (0%, 15%, 30% and 45%, w/w dry polymer...
The purpose of this study was to evaluate the effect of plasticizer type (glycerol, PEG-400, and sorbitol) and concentration (0%, 15%, 30% and 45%, w/w dry polymer weight) on rheological and physico-mechanical and structural properties of chitosan/zein blend film. Based on the analysis of rheological properties of chitosan/zein film-forming solutions, all film-forming solutions exhibited non-Newtonian behavior. The flow index of film-forming solution increased and apparent viscosity decreased with the increase of plasticizer concentration. The storage modulus (G') and the loss modulus (G″) decreased when plasticizer was added. The permeability of films increased significantly with the increase of plasticizer concentration, but the C/Z-P film (plasticized chitosan/zein film with PEG-400) had better barrier performance compared with the other two. The C/Z-P film had better mechanical properties and light transmission. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) revealed chitosan and zein had good compatibility due to the addition of the plasticizer, and crystallinity decreased with the increase of plasticizer concentration.
Topics: Chitosan; Glycerol; Mechanical Phenomena; Microscopy, Electron, Scanning; Permeability; Plasticizers; Polymers; Rheology; Sorbitol; Viscosity; X-Ray Diffraction; Zein
PubMed: 31812748
DOI: 10.1016/j.ijbiomac.2019.12.035 -
General and Comparative Endocrinology Aug 2015Due to their versatility, robustness, and low production costs, plastics are used in a wide variety of applications. Plasticizers are mixed with polymers to increase... (Review)
Review
Due to their versatility, robustness, and low production costs, plastics are used in a wide variety of applications. Plasticizers are mixed with polymers to increase flexibility of plastics. However, plasticizers are not covalently bound to plastics, and thus leach from products into the environment. Several studies have reported that two common plasticizers, bisphenol A (BPA) and phthalates, induce adverse health effects in vertebrates; however few studies have addressed their toxicity to non-mammalian species. The aim of this review is to compare the effects of plasticizers in animals, with a focus on aquatic species. In summary, we identified three main chains of events that occur in animals exposed to BPA and phthalates. Firstly, plasticizers affect development by altering both the thyroid hormone and growth hormone axes. Secondly, these chemicals interfere with reproduction by decreasing cholesterol transport through the mitochondrial membrane, leading to reduced steroidogenesis. Lastly, exposure to plasticizers leads to the activation of peroxisome proliferator-activated receptors, the increase of fatty acid oxidation, and the reduction in the ability to cope with the augmented oxidative stress leading to reproductive organ malformations, reproductive defects, and decreased fertility.
Topics: Animals; Endocrine Disruptors; Growth Hormone; Mammals; Models, Molecular; Phthalic Acids; Plasticizers; Reproduction
PubMed: 25448254
DOI: 10.1016/j.ygcen.2014.11.003 -
Environmental Pollution (Barking, Essex... Aug 2023Human membrane drug transporters are recognized as major actors of pharmacokinetics; they also handle endogenous compounds, including hormones and metabolites. Chemical... (Review)
Review
Human membrane drug transporters are recognized as major actors of pharmacokinetics; they also handle endogenous compounds, including hormones and metabolites. Chemical additives present in plastics interact with human drug transporters, which may have consequences for the toxicokinetics and toxicity of these widely-distributed environmental and/or dietary pollutants, to which humans are highly exposed. The present review summarizes key findings about this topic. In vitro assays have demonstrated that various plastic additives, including bisphenols, phthalates, brominated flame retardants, poly-alkyl phenols and per- and poly-fluoroalkyl substances, can inhibit the activities of solute carrier uptake transporters and/or ATP-binding cassette efflux pumps. Some are substrates for transporters or can regulate their expression. The relatively low human concentration of plastic additives from environmental or dietary exposure is a key parameter to consider to appreciate the in vivo relevance of plasticizer-transporter interactions and their consequences for human toxicokinetics and toxicity of plastic additives, although even low concentrations of pollutants (in the nM range) may have clinical effects. Existing data about interactions of plastic additives with drug transporters remain somewhat sparse and incomplete. A more systematic characterization of plasticizer-transporter relationships is needed. The potential effects of chemical additive mixtures towards transporter activities and the identification of transporter substrates among plasticizers, as well as their interactions with transporters of emerging relevance deserve particular attention. A better understanding of the human toxicokinetics of plastic additives may help to fully integrate the possible contribution of transporters to the absorption, distribution, metabolism and excretion of plastics-related chemicals, as well as to their deleterious effects towards human health.
Topics: Humans; Plastics; Toxicokinetics; Plasticizers; Membrane Transport Proteins; Environmental Pollutants; Drug Interactions
PubMed: 37236587
DOI: 10.1016/j.envpol.2023.121882 -
Applied Microbiology and Biotechnology Dec 2014Di(2-ethylhexyl)phthalate (DEHP) is a widely used plasticizer to render poly(vinyl chloride) (PVC) soft and malleable. Plasticized PVC is used in hospital equipment,... (Review)
Review
Di(2-ethylhexyl)phthalate (DEHP) is a widely used plasticizer to render poly(vinyl chloride) (PVC) soft and malleable. Plasticized PVC is used in hospital equipment, food wrapping, and numerous other commercial and industrial products. Unfortunately, plasticizers can migrate within the material and leach out of it over time, ending up in the environment and, frequently, the human body. DEHP has come under increased scrutiny as its breakdown products are believed to be endocrine disruptors and more toxic than DEHP itself. DEHP and its breakdown products have been identified as ubiquitous environmental contaminants, and daily human exposure is estimated to be in the microgram per kilogram level. The objective of this review is to summarize and comment on published sources of DEHP exposure and to give an overview of its environmental fate. Exposure through bottled water was examined specifically, as this concern is raised frequently, yet only little exposure to DEHP occurs through bottled water, and DEHP exposure is unlikely to stem from the packaging material itself. Packaged food was also examined and showed higher levels of DEHP contamination compared to bottled water. Exposure to DEHP also occurs in hospital environments, where DEHP leaches directly into liquids that passed through PVC/DEHP tubing and equipment. The latter exposure is at considerably higher levels compared to food and bottled water, specifically putting patients with chronic illnesses at risk. Overall, levels of DEHP in food and bottled water were below current tolerable daily intake (TDI) values. However, our understanding of the risks of DEHP exposure is still evolving. Given the prevalence of DEHP in our atmosphere and environment, and the uncertainty revolving around it, the precautionary principle would suggest its phaseout and replacement. Increased efforts to develop viable replacement compounds, which necessarily includes rigorous leaching, toxicity, and impact assessment studies, are needed before alternative plasticizers can be adopted as viable replacements.
Topics: Diethylhexyl Phthalate; Environmental Exposure; Environmental Pollutants; Food Contamination; Humans; Plasticizers; Plastics
PubMed: 25376446
DOI: 10.1007/s00253-014-6183-8 -
Biotechnology Progress Nov 2021The demand for biobased materials for various end-uses in the bioplastic industry is substantially growing due to increasing awareness of health and environmental... (Review)
Review
The demand for biobased materials for various end-uses in the bioplastic industry is substantially growing due to increasing awareness of health and environmental concerns, along with the toxicity of synthetic plasticizers such as phthalates. This fact has stimulated new regulations requiring the replacement of synthetic conventional plasticizers, particularly for packaging applications. Biobased plasticizers have recently been considered as essential additives, which may be used during the processing of compostable polymers to enormously boost biobased packaging applications. The development and utilization of biobased plasticizers derived from epoxidized soybean oil, castor oil, cardanol, citrate, and isosorbide have been broadly investigated. The synthesis of biobased plasticizers derived from renewable feedstocks and their impact on packaging material performance have been emphasized. Moreover, the effect of biobased plasticizer concentration, interaction, and compatibility on the polymer properties has been examined. Recent developments have resulted in the replacement of synthetic plasticizers by biobased counterparts. Particularly, this has been the case for some biodegradable thermoplastics-based packaging applications.
Topics: Biodegradable Plastics; Green Chemistry Technology; Plasticizers; Soybean Oil
PubMed: 34499430
DOI: 10.1002/btpr.3210 -
Journal of Exposure Science &... Sep 2023ortho-phthalates and other plasticizers impart flexibility to plastics in food production, processing, and packaging; food consumption is a dominant plasticizer exposure...
BACKGROUND
ortho-phthalates and other plasticizers impart flexibility to plastics in food production, processing, and packaging; food consumption is a dominant plasticizer exposure pathway. Lower molecular weight ortho-phthalates are being replaced in plastic products due to toxicity concerns, but toxic hazards of and exposures to replacement ortho-phthalates and other plasticizers are poorly understood.
OBJECTIVE
We measured 12 ortho-phthalates and 9 other plasticizers in conventional and organic U.S. food products to assess magnitude and profiles of contamination.
METHODS
We measured plasticizers in 34 vegetable oils, 10 milks, 18 infant formulas, and 9 cheese powders from macaroni kits using gas chromatography coupled with mass spectrometry (GC-MS). We analyzed plastic packaging composition using FTIR spectroscopy.
RESULTS
We detected eight ortho-phthalates and three alternatives ((1,2-cyclohexane dicarboxylic acid diisononyl ester (DINCH), diethylhexyl terephthalate (DEHT), and diisobutyl adipate (DIBA). Diethylhexyl phthalate (DEHP) was measured in all 71 products. DEHT had the highest concentration of any plasticizer (>10,000 ng/g in three oils). Oils had the highest total plasticizer (median = 770 ng/g, max = 14,900 ng/g) and milk the lowest (median = 88 ng/g, max = 120 ng/g). Organic milk and refined oils had higher median plasticizer levels than conventional. Refined oils had significantly lower concentrations than unrefined oils. Maximum contributors for every category were non-ortho-phthalates: DEHT (powdered infant formula and oils) and DIBA (cheese powder, milk and liquid formula). Plasticizers were not detected in packaging except epoxidized soybean oil in liquid formula lids.
IMPACT STATEMENT
Human exposure to plasticizers is a significant public health concern. Nevertheless, sources of such exposures are poorly characterized. This study adds valuable information for estimating legacy and alternative plasticizer exposures from foods. The method developed for measuring DINCH, DINP and DIDP broadens the range of plasticizers other researchers may analyze in future work. The profiles of plasticizer contamination varied depending on the food type. We also document that food processing may be a source of plasticizer contamination in foods.
Topics: Humans; Diethylhexyl Phthalate; Oils; Phthalic Acids; Plasticizers; United States; Food Contamination; Food Packaging
PubMed: 37726506
DOI: 10.1038/s41370-023-00596-0 -
Journal of Hazardous Materials Apr 2022Microplastics are emerging contaminants that are increasingly detected in soil environment, but their impact on soil microbiota and related biogeochemical processes...
Microplastics are emerging contaminants that are increasingly detected in soil environment, but their impact on soil microbiota and related biogeochemical processes remains poorly understood. In particular, the mechanisms involved (e.g., the role of chemical additives) are still elusive. In this study, we found that plasticizer-containing polyvinyl chloride (PVC) microplastics at 0.5% (w/w) significantly increased soil NH-N content and decreased NO-N content by up to 91%, and shaped soil microbiota into a microbial system with more nitrogen-fixing microorganisms (as indicated by nifDHK gene abundance), urea decomposers (ureABC genes and urease activity) and nitrate reducers (nasA, NR, NIT-6 and napAB genes), and less nitrifiers (amoC gene and potential nitrification rate). Exposure to plasticizer alone had a similar effect on soil nitrogen parameters but microplastics of pure PVC polymer (either granule or film) had little effect over 60 days, indicating that phthalate plasticizer released from microplastics was the main driver of effects observed. Furthermore, a direct link between phthalate plasticizer, microbial taxonomic changes and altered nitrogen metabolism was established by the isolation of phthalate-degrading bacteria involved in nitrogen cycling. This study highlights the importance of chemical additives in determining the interplay of microplastics with microbes and nutrient cycling, which needs to be considered in future studies.
Topics: Microbiota; Microplastics; Nitrogen; Phthalic Acids; Plasticizers; Plastics; Soil; Soil Microbiology
PubMed: 34865900
DOI: 10.1016/j.jhazmat.2021.127944 -
Environmental Science & Technology Jan 2024Hazardous chemicals in building and construction plastics can lead to health risks due to indoor exposure and may contaminate recycled materials. We systematically...
Hazardous chemicals in building and construction plastics can lead to health risks due to indoor exposure and may contaminate recycled materials. We systematically sampled new polyvinyl chloride floorings on the Swiss market ( = 151). We performed elemental analysis by X-ray fluorescence, targeted and suspect gas chromatography-mass spectrometry analysis of -phthalates and alternative plasticizers, and bioassay tests for cytotoxicity and oxidative stress, and endocrine, mutagenic, and genotoxic activities (for selected samples). Surprisingly, 16% of the samples contained regulated chemicals above 0.1 wt %, mainly lead and bis(2-ethylhexyl) phthalate (DEHP). Their presence is likely related to the use of recycled PVC in new flooring, highlighting that uncontrolled recycling can delay the phase-out of hazardous chemicals. Besides DEHP, 29% of the samples contained other -phthalates (mainly diisononyl and diisodecyl phthalates, DiNP and DiDP) above 0.1 wt %, and 17% of the samples indicated a potential to cause biological effects. Considering some overlap between these groups, they together make up an additional 35% of the samples of potential concern. Moreover, both suspect screening and bioassay results indicate the presence of additional potentially hazardous substances. Overall, our study highlights the urgent need to accelerate the phase-out of hazardous substances, increase the transparency of chemical compositions in plastics to protect human and ecosystem health, and enable the transition to a safe and sustainable circular economy.
Topics: Humans; Plasticizers; Diethylhexyl Phthalate; Ecosystem; Phthalic Acids; Plastics; Hazardous Substances
PubMed: 38241221
DOI: 10.1021/acs.est.3c04851 -
Journal of Pharmaceutical Sciences Jan 2018The objective of the study was to select solid-state plasticizers for hot-melt extrusion (HME) process. The physical and mechanical properties of plasticizers, in...
The objective of the study was to select solid-state plasticizers for hot-melt extrusion (HME) process. The physical and mechanical properties of plasticizers, in selected binary (polymer:plasticizer) and ternary (active pharmaceutical ingredient:polymer:plasticizer) systems, were evaluated to assess their effectiveness as processing aids for HME process. Indomethacin and Eudragit E PO were selected as model active pharmaceutical ingredient and polymer, respectively. Solubility parameters, thermal analysis, and rheological evaluation were used as assessment tools. Based on comparable solubility parameters, stearic acid, glyceryl behenate, and polyethylene glycol 8000 were selected as solid-state plasticizers. Binary and ternary physical mixtures were evaluated as a function of plasticizer concentration for thermal and rheological behavior. The thermal and rheological assessments also confirmed the miscibility predictions from solubility parameters. The understanding of thermal and rheological properties of the various mixtures helped in predicating plasticization efficiency of stearic acid, glyceryl behenate, and polyethylene glycol 8000. The evaluation also provided insight into the properties of the final product. An empirical model was also developed correlating rheological property of physical mixtures to actual HME process. Based on plasticizer efficiency, solid-state plasticizers and processing conditions can be selected for a HME process.
Topics: Fatty Acids; Hot Temperature; Indomethacin; Plasticizers; Polyethylene Glycols; Polymers; Polymethacrylic Acids; Rheology; Solubility; Stearic Acids; Technology, Pharmaceutical
PubMed: 28923318
DOI: 10.1016/j.xphs.2017.09.004 -
Reviews on Environmental Health Dec 2022Phthalates are endocrine disruptors, widely used as plasticizers to impart flexibility in plastics, and as solvents in personal care products. Due to their nearly... (Review)
Review
Phthalates are endocrine disruptors, widely used as plasticizers to impart flexibility in plastics, and as solvents in personal care products. Due to their nearly ubiquitous use in consumer products, most humans are exposed to phthalates daily. There has been extensive research on the reproductive health effects associated with phthalate exposure, but less attention has been paid to other actions. This review aims to summarize the known action of phthalates on different nuclear receptors. Some phthalates bind to and activate the estrogen receptor, making them weakly estrogenic. However, other phthalates antagonize androgen receptors. Some high molecular weight phthalates antagonize thyroid receptors, affecting metabolism. Several phthalates activate and interfere with the normal function of different peroxisome proliferator-activated receptors (PPARs), receptors that have critical roles in lipid metabolism and energy homeostasis. Some phthalates activate the aryl hydrocarbon receptor, which is critical for xenobiotic metabolism. Although phthalates have a short half-life , because people are continuously exposed, studies should examine the health effects of phthalates associated with long-term exposure. There is limited research on the effects of phthalates on health outcomes aside from reproductive function, particularly concerning are childhood adiposity, behavior, and learning. There is also limited information on actions of phthalates not mediated via nuclear receptors. Humans are exposed to multiple chemicals simultaneously, and how chemical mixtures act on nuclear receptor activity needs study. Although we know a great deal about phthalates, there is still much that remains uncertain. Future studies need to further examine their other potential health effects.
Topics: Humans; Child; Phthalic Acids; Plasticizers; Endocrine Disruptors; Plastics
PubMed: 34592072
DOI: 10.1515/reveh-2020-0162