-
Sports Medicine - Open Jan 2022Collisions in rugby union and sevens have a high injury incidence and burden, and are also associated with player and team performance. Understanding the frequency and...
BACKGROUND
Collisions in rugby union and sevens have a high injury incidence and burden, and are also associated with player and team performance. Understanding the frequency and intensity of these collisions is therefore important for coaches and practitioners to adequately prepare players for competition. The aim of this review is to synthesise the current literature to provide a summary of the collision frequencies and intensities for rugby union and rugby sevens based on video-based analysis and microtechnology.
METHODS
A systematic search using key words was done on four different databases from 1 January 1990 to 1 September 2021 (PubMed, Scopus, SPORTDiscus and Web of Science).
RESULTS
Seventy-three studies were included in the final review, with fifty-eight studies focusing on rugby union, while fifteen studies explored rugby sevens. Of the included studies, four focused on training-three in rugby union and one in sevens, two focused on both training and match-play in rugby union and one in rugby sevens, while the remaining sixty-six studies explored collisions from match-play. The studies included, provincial, national, international, professional, experienced, novice and collegiate players. Most of the studies used video-based analysis (n = 37) to quantify collisions. In rugby union, on average a total of 22.0 (19.0-25.0) scrums, 116.2 (62.7-169.7) rucks, and 156.1 (121.2-191.0) tackles occur per match. In sevens, on average 1.8 (1.7-2.0) scrums, 4.8 (0-11.8) rucks and 14.1 (0-32.8) tackles occur per match.
CONCLUSIONS
This review showed more studies quantified collisions in matches compared to training. To ensure athletes are adequately prepared for match collision loads, training should be prescribed to meet the match demands. Per minute, rugby sevens players perform more tackles and ball carries into contact than rugby union players and forwards experienced more impacts and tackles than backs. Forwards also perform more very heavy impacts and severe impacts than backs in rugby union. To improve the relationship between matches and training, integrating both video-based analysis and microtechnology is recommended. The frequency and intensity of collisions in training and matches may lead to adaptations for a "collision-fit" player and lend itself to general training principles such as periodisation for optimum collision adaptation. Trial Registration PROSPERO registration number: CRD42020191112.
PubMed: 35050440
DOI: 10.1186/s40798-021-00398-4 -
Advanced Drug Delivery Reviews 2020Microneedles (MNs) have been used to deliver drugs for over two decades. These platforms have been proven to increase transdermal drug delivery efficiency dramatically...
Microneedles (MNs) have been used to deliver drugs for over two decades. These platforms have been proven to increase transdermal drug delivery efficiency dramatically by penetrating restrictive tissue barriers in a minimally invasive manner. While much of the early development of MNs focused on transdermal drug delivery, this technology can be applied to a variety of other non-transdermal biomedical applications. Several variations, such as multi-layer or hollow MNs, have been developed to cater to the needs of specific applications. The heterogeneity in the design of MNs has demanded similar variety in their fabrication methods; the most common methods include micromolding and drawing lithography. Numerous materials have been explored for MN fabrication which range from biocompatible ceramics and metals to natural and synthetic biodegradable polymers. Recent advances in MN engineering have diversified MNs to include unique shapes, materials, and mechanical properties that can be tailored for organ-specific applications. In this review, we discuss the design and creation of modern MNs that aim to surpass the biological barriers of non-transdermal drug delivery in ocular, vascular, oral, and mucosal tissue.
Topics: Administration, Topical; Biological Transport; Drug Delivery Systems; Equipment Design; Humans; Microinjections; Microtechnology; Polymers; Prostheses and Implants
PubMed: 31837356
DOI: 10.1016/j.addr.2019.11.010 -
Sports Medicine (Auckland, N.Z.) Nov 2018Quantifying the peak match demands within the football codes is useful for the appropriate prescription of external training load. Wearable microtechnology devices can...
BACKGROUND
Quantifying the peak match demands within the football codes is useful for the appropriate prescription of external training load. Wearable microtechnology devices can be used to identify the peak match demands, although various methodologies exist at present.
OBJECTIVES
This systematic review aimed to identify the methodologies and microtechnology-derived variables used to determine the peak match demands, and to summarise current data on the peak match demands in the football codes.
METHODS
A systematic search of electronic databases was performed from earliest record to May 2018; keywords relating to microtechnology, peak match demands and football codes were used.
RESULTS
Twenty-seven studies met the eligibility criteria. Six football codes were reported: rugby league (n = 7), rugby union (n = 5), rugby sevens (n = 4), soccer (n = 6), Australian Football (n = 2) and Gaelic Football (n = 3). Three methodologies were identified: moving averages, segmental and 'ball in play'. The moving averages is the most commonly used (63%) and superior method, identifying higher peak demands than other methods. The most commonly used variables were relative distance covered (63%) and external load in specified speed zones (57%).
CONCLUSION
This systematic review has identified moving averages to be the most appropriate method for identifying the peak match demands in the football codes. Practitioners and researchers should choose the most relevant duration-specific period and microtechnology-derived variable for their specific needs. The code specific peak match demands revealed can be used for the prescription of conditioning drills and training intensity.
Topics: Football; Geographic Information Systems; Humans; Microtechnology; Soccer; Workload
PubMed: 30088218
DOI: 10.1007/s40279-018-0965-6 -
Sports Medicine - Open Jan 2020Collisions (i.e. tackles, ball carries, and collisions) in the rugby league have the potential to increase injury risk, delay recovery, and influence individual and team... (Review)
Review
BACKGROUND
Collisions (i.e. tackles, ball carries, and collisions) in the rugby league have the potential to increase injury risk, delay recovery, and influence individual and team performance. Understanding the collision demands of the rugby league may enable practitioners to optimise player health, recovery, and performance.
OBJECTIVE
The aim of this review was to (1) characterise the dose of collisions experienced within senior male rugby league match-play and training, (2) systematically and critically evaluate the methods used to describe the relative and absolute frequency and intensity of collisions, and (3) provide recommendations on collision monitoring.
METHODS
A systematic search of electronic databases (PubMed, SPORTDiscus, Scopus, and Web of Science) using keywords was undertaken. A meta-analysis provided a pooled mean of collision frequency or intensity metrics on comparable data sets from at least two studies.
RESULTS
Forty-three articles addressing the absolute (n) or relative collision frequency (n min) or intensity of senior male rugby league collisions were included. Meta-analysis of video-based studies identified that forwards completed approximately twice the number of tackles per game than backs (n = 24.6 vs 12.8), whilst ball carry frequency remained similar between backs and forwards (n = 11.4 vs 11.2). Variable findings were observed at the subgroup level with a limited number of studies suggesting wide-running forwards, outside backs, and hit-up forwards complete similar ball carries whilst tackling frequency differed. For microtechnology, at the team level, players complete an average of 32.7 collisions per match. Limited data suggested hit-up and wide-running forwards complete the most collisions per match, when compared to adjustables and outside backs. Relative to playing time, forwards (n min = 0.44) complete a far greater frequency of collision than backs (n min = 0.16), with data suggesting hit-up forwards undertake more than adjustables, and outside backs. Studies investigating g force intensity zones utilised five unique intensity schemes with zones ranging from 2-3 g to 13-16 g. Given the disparity between device setups and zone classification systems between studies, further analyses were inappropriate. It is recommended that practitioners independently validate microtechnology against video to establish criterion validity.
CONCLUSIONS
Video- and microtechnology-based methods have been utilised to quantify collisions in the rugby league with differential collision profiles observed between forward and back positional groups, and their distinct subgroups. The ball carry demands of forwards and backs were similar, whilst tackle demands were greater for forwards than backs. Microtechnology has been used inconsistently to quantify collision frequency and intensity. Despite widespread popularity, a number of the microtechnology devices have yet to be appropriately validated. Limitations exist in using microtechnology to quantify collision intensity, including the lack of consistency and limited validation. Future directions include application of machine learning approaches to differentiate types of collisions in microtechnology datasets.
PubMed: 31970529
DOI: 10.1186/s40798-019-0233-9 -
Sports Medicine - Open Feb 2021Global positioning systems (GPS) imbedded with accelerometer systems (AS) are used in rugby union (RU) to collect information on absolute and relative distances,...
BACKGROUND
Global positioning systems (GPS) imbedded with accelerometer systems (AS) are used in rugby union (RU) to collect information on absolute and relative distances, distances in different speed zones, high-speed running (HSR) distances, repeated high-intensity efforts (RHIE) and collisions and impacts. This information can be used to monitor match play which can then be used to plan training sessions. The objective of this review was to conduct a systematic review of studies which have reported the use of GPS and AS.
METHODS
A systematic review of the use of GPS and AS in both age-grade and senior rugby was conducted. The authors systematically searched electronic databases from January 2010 until March 2020. Keywords included rugby union, GPS, global position* and microtechnology.
RESULTS
A total of 51 studies met the eligibility criteria and were included in this review. There was a total of 34 studies utilising GPS and AS in senior RU players (mean ± SD; age 26.2 ± 1.9 years; height 185.7 ± 2.6 cm; mass 101.3 ± 4.2 kg) and 17 studies in age-grade RU players (mean ± SD; age 17.6 ± 1.5 years; height 182.1 ± 3.3 cm; mass 87.1 ± 8.6 kg). The results of this review highlighted that there are differences between backs and forwards and within these positions in these groups during both match play and training sessions. The backs covered greater total absolute, relative and HSR distance compared to forwards. Forwards are involved in more collisions and impacts than backs. When investigating the most intense periods of match play, studies in this review highlighted that the demands during these periods outweigh the average demands of the game. It was proposed that a rolling average over different time epochs is the best way to assess this and ensure that the most intense periods of play are assessed and monitored.
CONCLUSIONS
The information highlighted in this review can be used to help coaches assess performances in match play, allow them to plan appropriate training sessions and monitor training load.
PubMed: 33616786
DOI: 10.1186/s40798-021-00305-x -
Diagnostics (Basel, Switzerland) Jun 2022Human Papilloma Virus (HPV) represents the most prevalent genital infection in young women of reproductive age. (Review)
Review
BACKGROUND
Human Papilloma Virus (HPV) represents the most prevalent genital infection in young women of reproductive age.
OBJECTIVE
This systematic review aims to estimate the effect of HPV infection during pregnancy and assess the correlation between HPV and adverse pregnancy outcomes.
MATERIALS AND METHODS
The search strategy has been developed based on the PICOS framework: Population (pregnant women infected with HPV), Intervention (HPV infection confirmed by molecular tests), Comparator (pregnant women without HPV infection), Outcomes (adverse pregnancy outcomes) and Study design (observational studies). We searched PubMed, Web of Science, and Scopus databases on 8 January 2022 by using the following keywords: "HPV", "prematurity", "preterm birth", "miscarriage", "premature rupture of membranes", "adverse pregnancy outcome", "low birth weight", "fetal growth restriction", "pregnancy-induced hypertensive disorders", "preeclampsia". Selection criteria were HPV infection confirmed within maximum 2 years before pregnancy with a molecular test and adverse pregnancy outcomes. (Results: Although numerous studies are conducted on this topic, data are still controversial regarding identifying maternal HPV infection as a risk factor for adverse pregnancy outcomes. More prospective large cohort studies are needed to prove a causative relationship.
PubMed: 35741280
DOI: 10.3390/diagnostics12061471 -
Annual Review of Biomedical Engineering Jul 2021Modeling immunity in vitro has the potential to be a powerful tool for investigating fundamental biological questions, informing therapeutics and vaccines, and providing...
Modeling immunity in vitro has the potential to be a powerful tool for investigating fundamental biological questions, informing therapeutics and vaccines, and providing new insight into disease progression. There are two major elements to immunity that are necessary to model: primary immune tissues and peripheral tissues with immune components. Here, we systematically review progress made along three strategies to modeling immunity: ex vivo cultures, which preserve native tissue structure; microfluidic devices, which constitute a versatile approach to providing physiologically relevant fluid flow and environmental control; and engineered tissues, which provide precise control of the 3D microenvironment and biophysical cues. While many models focus on disease modeling, more primary immune tissue models are necessary to advance the field. Moving forward, we anticipate that the expansion of patient-specific models may inform why immunity varies from patient to patient and allow for the rapid comprehension and treatment of emerging diseases, such as coronavirus disease 2019.
Topics: Adaptive Immunity; Animals; Biophysics; COVID-19; Humans; Immune System; Immunity, Innate; In Vitro Techniques; Lab-On-A-Chip Devices; Lymphocytes; Macrophages; Mice; Microfluidics; SARS-CoV-2; Thymus Gland; Tissue Array Analysis; Tissue Engineering
PubMed: 33872520
DOI: 10.1146/annurev-bioeng-082420-124920 -
PloS One 2020Bone marrow (BM) is an organ responsible for crucial processes in living organs, e. g., hematopoiesis. In recent years, Organ-on-a-Chip (OoC) devices have been used to...
Bone marrow (BM) is an organ responsible for crucial processes in living organs, e. g., hematopoiesis. In recent years, Organ-on-a-Chip (OoC) devices have been used to satisfy the need for in vitro systems that better mimic the phenomena occurring in the BM microenvironment. Given the growing interest in these systems and the diversity of developed devices, an integrative systematic literature review is required. We have performed this review, following the PRISMA method aiming to identify the main characteristics and assess the effectiveness of the devices that were developed to represent the BM. A search was performed in the Scopus, PubMed, Web of Science and Science Direct databases using the keywords (("bone marrow" OR "hematopoietic stem cells" OR "haematopoietic stem cells") AND ("organ in a" OR "lab on a chip" OR "microfluidic" OR "microfluidic*" OR ("bioreactor" AND "microfluidic*"))). Original research articles published between 2009 and 2020 were included in the review, giving a total of 21 papers. The analysis of these papers showed that their main purpose was to study BM cells biology, mimic BM niches, model pathological BM, and run drug assays. Regarding the fabrication protocols, we have observed that polydimethylsiloxane (PDMS) material and soft lithography method were the most commonly used. To reproduce the microenvironment of BM, most devices used the type I collagen and alginate. Peristaltic and syringe pumps were mostly used for device perfusion. Regarding the advantages compared to conventional methods, there were identified three groups of OoC devices: perfused 3D BM; co-cultured 3D BM; and perfused co-cultured 3D BM. Cellular behavior and mimicking their processes and responses were the mostly commonly studied parameters. The results have demonstrated the effectiveness of OoC devices for research purposes compared to conventional cell cultures. Furthermore, the devices have a wide range of applicability and the potential to be explored.
Topics: Animals; Biocompatible Materials; Biomimetics; Bone Marrow; Humans; Lab-On-A-Chip Devices; Microfluidics
PubMed: 33306749
DOI: 10.1371/journal.pone.0243840 -
Advanced Drug Delivery Reviews 2020Modeling of human organs has long been a task for scientists in order to lower the costs of therapeutic development and understand the pathological onset of human...
Modeling of human organs has long been a task for scientists in order to lower the costs of therapeutic development and understand the pathological onset of human disease. For decades, despite marked differences in genetics and etiology, animal models remained the norm for drug discovery and disease modeling. Innovative biofabrication techniques have facilitated the development of organ-on-a-chip technology that has great potential to complement conventional animal models. However, human organ as a whole, more specifically the human heart, is difficult to regenerate in vitro, in terms of its chamber specific orientation and its electrical functional complexity. Recent progress with the development of induced pluripotent stem cell differentiation protocols, made recapitulating the complexity of the human heart possible through the generation of cells representative of atrial & ventricular tissue, the sinoatrial node, atrioventricular node and Purkinje fibers. Current heart-on-a-chip approaches incorporate biological, electrical, mechanical, and topographical cues to facilitate tissue maturation, therefore improving the predictive power for the chamber-specific therapeutic effects targeting adult human. In this review, we will give a summary of current advances in heart-on-a-chip technology and provide a comprehensive outlook on the challenges involved in the development of human physiologically relevant heart-on-a-chip.
Topics: Drug Discovery; Heart; Humans; Induced Pluripotent Stem Cells; Lab-On-A-Chip Devices; Microtechnology; Myocytes, Cardiac; Tissue Engineering
PubMed: 31917972
DOI: 10.1016/j.addr.2019.12.002 -
Journal of Nanobiotechnology Dec 2021Tailoring extracellular vesicles (EVs) can bequeath them with diverse functions and efficient performance in nano-biotechnology. Engineering and modification of EVs...
BACKGROUND
Tailoring extracellular vesicles (EVs) can bequeath them with diverse functions and efficient performance in nano-biotechnology. Engineering and modification of EVs improves the targeted drug delivery efficiency. Here, we performed systematic review of various methods for EVs modifications.
METHODS
PubMed, Scopus, ISI Web of Science, EMBASE, and Google Scholar were searched for available articles on EVs modifications (up to March 2021). In total, 1208 articles were identified and assessed, and then only 36 articles were found eligible and included.
RESULTS
Six studies demonstrate the application of click chemistry, seven studies used co-incubation, two studies used chemical transfection, four studies implicated electroporation and sonication approach for modification of EVs. Moreover, two studies utilized microfluidics as suitable approach for loading cargo into EVs, while eight studies showed freeze-thaw method as feasible for these biological nanoparticles.
CONCLUSION
Freeze-thaw approach is found to be convenient and popular among researchers for performing modifications in EVs for the purpose of targeted drug delivery loading. Clinical-grade EVs production with good clinical practices (GCPs) is challenging in the current scenario. More studies are needed to determine the best suitable approach for cargo loading of EVs that may be exploited for research and therapeutic use.
Topics: Click Chemistry; Cryopreservation; Drug Delivery Systems; Electroporation; Extracellular Vesicles; Genetic Engineering; Liposomes; Microfluidics; Nanoparticles; Sonication
PubMed: 34965878
DOI: 10.1186/s12951-021-01219-2