-
BMC Oral Health Jan 2024White spot lesions represent the first stage of caries and their prevalence has been increasing in recent years, particularly in patients undergoing orthodontic...
BACKGROUND
White spot lesions represent the first stage of caries and their prevalence has been increasing in recent years, particularly in patients undergoing orthodontic treatment. DIferential diagnosis and lesion activity are essential to decide on the clinical approaches to treatment. The aim of this study is to understand if the new diagnostic tools such as fluorescence, microradiography and computed microtomography have the potential to change the conventional treatment of white spots".
METHODS
A systematic search of available studies in the literature was carried out, using PRISMA guidelines, in Pubmed and Scopus electronic databases and manually to identify relevant articles to answer the PICO question: "Do the new diagnostic tools have the potential to change the conventional treatment of white spots?". This systematic review included randomized controlled trials (RCT), cross-sectional and longitudinal studies complying with the following inclusion criteria: (i) studies in humans, (ii) studies about white spot lesions, (iii) studies published between 2012 and 2023, (iv) studies having both diagnosis and treatment and (v) studies with full text available. In this review we excluded other systematic reviews of clinical trials and in vitro studies. The RoB tool was used to assess the risk of bias.
RESULTS
The systematic literature search identified 143 potentially relevant references, which after applying the exclusion criteria, resulted in 20 articles. Regarding diagnostic methods, most articles found were based on conventional methods of visual examination (n:10) or fluorescence (n:7). The least referenced diagnostic techniques were based on the use of clinical photographs (n:2), cross-sectional microradiography (n:1) and computed microtomography (n:1). The use of DIAGNOdent was reported by 3 in vitro studies. With regard to therapies, most studies reported the use of infiltrating resin (n:7) and fluoride-based products (n:5). Other studies have reported the use of self-assembling peptide P11-4 (n:1), home care (n:1), casein phosphopeptide-amorphous calcium phosphate (n:2) and hydrochloric acid (n:1). Combination therapies were also considered.
CONCLUSION
Diagnostic tool does not have the potential to change the form of treatment, whether it is a conventional method or a more differentiated one.
Topics: Humans; Combined Modality Therapy; Dental Care; Caseins; Databases, Factual; Dental Caries; Fluorides
PubMed: 38195439
DOI: 10.1186/s12903-023-03720-6 -
Materials (Basel, Switzerland) Feb 2023Certain dentin hypersensitivity treatment materials include oxalic acid to coat dentin surfaces with minerals, while certain organic acids possess a remineralization...
Certain dentin hypersensitivity treatment materials include oxalic acid to coat dentin surfaces with minerals, while certain organic acids possess a remineralization effect. Herein, an organic acid that inhibits the demineralization and coating of root surfaces was evaluated. Specimens were produced using five non-carious extracted bovines. Four different acids were used: oxalic acid (OA), malonic acid (MA), polyacrylic acid (PA), and succinic acid (SA). Each acid was applied to the root surface and washed using distilled water or a remineralization solution, and the surface was observed using scanning electron microscopy (SEM). All the surfaces of each specimen, barring the polished surface, were covered with wax and immersed in an automatic pH cycling system for two weeks. Dentin demineralization was analyzed using transverse microradiography (TMR) before and after pH cycling. SEM analysis demonstrated that the three acid groups demineralized the dentin surface, whereas the OA group generated crystals covering the dentin surface, even in a distilled water environment. TMR analysis revealed that the OA groups showed significantly lower integrated mineral loss compared with the other groups, even in the distilled water environment. The results suggest that OA generates insoluble calcium oxalate crystals on the dentin and suppresses demineralization even under low saliva conditions.
PubMed: 36837083
DOI: 10.3390/ma16041454 -
Journal of Clinical and Diagnostic... Oct 2016This article reviews different techniques for evaluating dental erosion, weighs the advantages and disadvantages of these techniques, and presents the latest trends in... (Review)
Review
This article reviews different techniques for evaluating dental erosion, weighs the advantages and disadvantages of these techniques, and presents the latest trends in the study of dental erosion. In May 2014, an initial search was carried out in the PubMed/MEDLINE database of indexed journals from 1975 to 2013 using the following keywords: dental erosion; dental erosion In-vitro; and dental erosion in-vivo. Bibliographic citations from the papers found were then used to find other useful sources. The authors categorize the techniques into three classes: in-vitro, in-vivo and in-vitro/in-vivo. The article discusses the instrumentation required to use each of these techniques, as well as their rationale, merits and applications. The emergence of in-vitro/in-vivo techniques offers the potential to accurately quantify tooth wear in clinical situations. Cross-sectional as well as longitudinal studies show that these techniques will improve diagnosis, treatment planning and management of dental erosion.
PubMed: 27891489
DOI: 10.7860/JCDR/2016/17996.8634 -
Australian Dental Journal Dec 2020The aim of this study was to evaluate white spot lesion (WSL) remineralization and fluoride uptake by the application of fluoride varnishes directly onto artificial WSLs...
INTRODUCTION
The aim of this study was to evaluate white spot lesion (WSL) remineralization and fluoride uptake by the application of fluoride varnishes directly onto artificial WSLs in vitro.
METHODS
MI varnish containing casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and 2.26% fluoride and Duraphat varnish containing 2.26% fluoride (no added calcium) were compared with a placebo varnish (no added calcium or fluoride). Two WSLs were prepared in enamel slabs and varnish applied to cover one of the two lesions. Each slab was immersed in artificial saliva for 14 days at 37°C. Mineral content was determined using transverse microradiography and fluoride uptake using electron probe microanalysis. The data were statistically analysed using a linear mixed model.
RESULTS
Both MI and Duraphat varnishes significantly remineralized the covered and uncovered WSLs when compared with the placebo varnish (P < 0.001). The WSLs covered with varnish showed greater remineralization than those uncovered. MI varnish produced the highest level of remineralization and significantly greater fluoride uptake (0.44 ± 0.08 wt%) compared with Duraphat (0.24 ± 0.03 wt%) and the placebo varnish (0.06 ± 0.05 wt%).
CONCLUSION
Varnish containing fluoride and CPP-ACP was superior to varnish containing fluoride alone in promoting WSL remineralization and fluoride uptake.
Topics: Cariostatic Agents; Caseins; Dental Caries; Dental Enamel; Fluorides; Fluorides, Topical; Humans; Minerals; Tooth Remineralization
PubMed: 32678914
DOI: 10.1111/adj.12787 -
Brazilian Dental Journal 2023Radiopaque properties in the infiltrant should be interesting for clinicians to feel more confident to indicate this treatment. Thus, the aim of this study was to...
Radiopaque properties in the infiltrant should be interesting for clinicians to feel more confident to indicate this treatment. Thus, the aim of this study was to evaluate the effect of the incorporation of barium and ytterbium particles on the physical properties of resin infiltrants. Groups were divided according to the addition of ytterbium oxide (Y) alone (30 or 40%) or Y with barium (YB) (15/15% or 20/20% respectively) in the Icon commercial infiltrant and in the experimental infiltrant base. Digital radiography (n=5), Microradiography (n=5), Microtomography (n=3), degree of conversion (n=5), water sorption (n=16), solubility (n=16), contact angle (n=16), flexural strength (n=16), elastic modulus (n=16) and Energy dispersive X-ray Spectroscopy (n=10) were performed. Analyses were performed using the R program, with a significance level of 5%, and microradiography and Microtomography analyses were evaluated qualitatively. In groups with 30 or 40% of ytterbium, radiopacity was higher or equal to enamel. Microradiography and Microtomography appear to have more radiopacity in groups with 40% (Y). Among the groups with no particle addition, those of the experimental infiltrant presented a higher degree of conversion than those of Icon®. In most groups, there was solubility below the ISO-recommended levels. The addition of particles resulted in higher viscosity. Groups with Icon had higher flexural strength and elastic modulus than groups with experimental infiltrant. The addition of 40% (Y) improved polymerization, had low solubility, and had greater radiopacity than enamel, however negatively affected the viscosity increasing then. Experimental groups with the base showed a higher water sorption than Icon groups.
Topics: Composite Resins; Barium; Ytterbium; Polymethacrylic Acids; Materials Testing; Water
PubMed: 37909646
DOI: 10.1590/0103-6440202305379 -
Biomimetics (Basel, Switzerland) Jan 2023Biomimetic technologies for the remineralisation of enamel subsurface lesions (ESLs) have been developed and include: fluorocalcium phosphosilicate bioglass (BG/F);...
Biomimetic technologies for the remineralisation of enamel subsurface lesions (ESLs) have been developed and include: fluorocalcium phosphosilicate bioglass (BG/F); casein phosphopeptide-amorphous calcium phosphate (CPP−ACP) and with fluoride (CPP−ACFP); and self-assembling oligopeptide P11-4 (SAP). The aim of this study was to compare the remineralisation of ESLs in vitro using these technologies. Human enamel slabs with ESLs were cut into two half-slabs; one half-slab was untreated (control), and the other half was treated by exposure to one of the four technologies with artificial saliva (AS) or AS alone for 14 days at 37 °C. The technologies were applied to the ESL surface according to the manufacturer’s instructions. At the completion of each treatment, the treated half-slabs and their paired control half-slabs were embedded, sectioned and the mineral content was determined using transverse microradiography. The change in mineral content (remineralisation) between treatments was statistically analysed using one-way ANOVA. The order from highest to lowest remineralisation was CPP−ACFP (52.6 ± 2.6%) > CPP−ACP (43.0 ± 4.9%) > BG/F (13.2 ± 2.5%) > SAP (5.8 ± 1.6%) > AS (2.1 ± 0.5%). Only CPP−ACFP and CPP−ACP produced remineralisation throughout the body of the lesions. All four biomimetic technologies had some effect on the remineralisation of ESLs; however, CPP−ACFP with calcium, phosphate and fluoride ions stabilised by CPP was superior in the level and pattern of remineralisation obtained.
PubMed: 36648803
DOI: 10.3390/biomimetics8010017 -
PloS One 2017Detection of occlusal caries with visual examination using ICDAS correlates strongly with histology under stereomicroscopy (SM), but dentin aspects under SM are...
Detection of occlusal caries with visual examination using ICDAS correlates strongly with histology under stereomicroscopy (SM), but dentin aspects under SM are ambiguous regarding mineral content. Thus, our aim was to test two null hypotheses: SM and microradiography result in similar correlations between ICDAS and histology; SM and microradiography result in similar positive (PPV) and negative predictive values (NPV) of ICDAS cut-off 1-2 (scores 0-2 as sound) with histological threshold D3 (demineralization in the inner third of dentin). Occlusal surfaces of extracted permanent teeth (n = 115) were scored using ICDAS. Undemineralized ground sections were histologically scored using both SM without contrast solution and microradiography after immersion in Thoulet's solution 1.47 for 24 h (MRC). Correlation between ICDAS and histology differed from SM (0.782) to MRC (0.511) (p = 0.0002), with a large effect size "q" of 0.49 (95% CI: 0.638/0.338). For ICDAS cut-off 1-2 and D3, PPV from MRC (0.56) was higher than that from SM (0.28) (p< 0.00001; effect size h = 0.81), and NPV from MRC (0.72) was lower than that from SM (1,00) (p < 0.00001; effect size h = 1.58). In conclusion, SM overestimated the correlation between ICDAS and lesion depth, and underestimated the number of occlusal surfaces with ICDAS cut-off 1-2 and deep dentin demineralization.
Topics: Contrast Media; Humans; Microradiography; Microscopy; Reproducibility of Results
PubMed: 28841688
DOI: 10.1371/journal.pone.0183432 -
Caries Research 2022This study compared the effect of topically applied fluoride products on dentine lesions in an in vitro experiment. Demineralized bovine dentine specimens were treated...
This study compared the effect of topically applied fluoride products on dentine lesions in an in vitro experiment. Demineralized bovine dentine specimens were treated once with either SDF solution (35,400 ppm F), NaF varnish (22,600 ppm F), TiF4 solution (9,200 ppm F), SnF2 gel (1,000 ppm F), no treatment (control), or preserved as baseline lesions. After the application and subsequent removal of the fluoride products, the specimens were subjected to pH-cycling. Calcium loss and uptake in the de- and remineralization buffers were assessed daily. Fluoride release into the buffers was analyzed on days 1, 2, 3, 5, 8, and 13. After the pH-cycling period, mineral distribution throughout the lesion depth was analyzed using transversal microradiography (TMR). X-ray energy-dispersive spectroscopy (EDS) examined the deposition of silver, titanium, and tin after application of SDF, TiF4, and SnF2, respectively. Overall, calcium loss and uptake analysis in the de- and remineralization buffers revealed that the SDF product was the most effective in inhibiting lesion progression, followed by the TiF4, NaF, and SnF2 products. Fluoride analysis disclosed a steep reduction of the amount of fluoride released into de- and remineralization buffers with time. The fluoride effects on de- and remineralization continued beyond the days that fluoride was released into the buffers. TMR analysis showed significant remineralization in the outer zone of the dentine lesions for all fluoride products, with SDF giving hypermineralization in this zone. In the inner zone, lesions developed in all fluoride groups, with the smallest in the SDF group. EDS showed silver and titanium deposition in depth up to 85 μm and 8 μm, respectively, while no tin deposition was observed. The silver in the dentine lesions did not contribute significantly to the density of the TMR profiles in the SDF group. In conclusion, all topical fluoride products protected the dentine lesions against lesion progression, but at different degrees. SDF showed a superior effect in protection against further demineralization and enhancement of remineralization. This was probably attributed to its fluoride concentration that was the highest among the fluoride products.
Topics: Animals; Calcium; Cariostatic Agents; Cattle; Dentin; Fluorides; Humans; Hydrogen-Ion Concentration; Silver; Sodium Fluoride; Titanium; Tooth Demineralization; Tooth Remineralization
PubMed: 34937019
DOI: 10.1159/000521453 -
Frontiers in Genetics 2021Osteogenesis imperfecta (OI), which is most often due to a collagen type 1 gene mutation, is characterized by low bone density and bone fragility. In OI patients,...
Osteogenesis imperfecta (OI), which is most often due to a collagen type 1 gene mutation, is characterized by low bone density and bone fragility. In OI patients, gender-related differences were reported, but data in the literature are not convergent. We previously observed that sclerostin antibody (Scl-Ab), which stimulates osteoblast Wnt pathway via sclerostin inactivation, improved spine and long-bone parameters and biomechanical strength in female oim/oim mice, a validated model of human type 3 OI. Here, we wanted to highlight the effect of Scl-Ab on male oim/oim bones in order to identify a possible distinct therapeutic effect from that observed in females. According to the same protocol as our previous study with female mice, male wild-type (Wt) and oim/oim mice received vehicle or Scl-Ab from 5 to 14 weeks of age. Clinimetric and quantitative bone parameters were studied using X-rays, peripheral quantitative computed tomography, microradiography, and dynamic histomorphometry and compared to those of females. Contrary to Wt mice, male oim/oim had significantly lower weight, snout-sacrum length, and bone mineral content than females at 5 weeks. No significant difference in these clinimetric parameters was observed at 14 weeks, whereas male oim showed significantly more long-bone fractures than females. Scl-Ab improved bone mineral density and bone volume/total volume ratio (BV/TV) of vertebral body in Wt and oim/oim, without significant difference between male and female at 14 weeks. Male vehicle oim/oim had a significantly lower cortical thickness (Ct.Th) and BV/TV of tibial diaphysis than female and showed a higher number of fractures at 14 weeks. Scl-Ab increased midshaft periosteal apposition rate in such a way that tibial Ct.Th of male oim/oim was not significantly different from the female one at 14 weeks. The number of fractures was lower in male than female oim/oim after 14 weeks of Scl-Ab treatment, but this difference was not significant. Nevertheless, Scl-Ab-treated oim/oim male and female mice remained smaller than the Wt ones. In conclusion, our results highlighted differences between male and female oim/oim at 4 and 14 weeks of age, as well as some male-specific response of cortical bone to Scl-Ab. These gender-related particularities of oim/oim should be considered when testing experimental treatments.
PubMed: 34447412
DOI: 10.3389/fgene.2021.705505 -
Pathogens (Basel, Switzerland) Sep 2022Background: Secondary caries often result in a high failure rate of resin composite restoration. Herein, we studied the dodecylmethylaminoethyl methacrylate−modified...
Background: Secondary caries often result in a high failure rate of resin composite restoration. Herein, we studied the dodecylmethylaminoethyl methacrylate−modified resin adhesive (DMAEM@RA) to investigate its pH-responsive antimicrobial effect on Streptococcus mutans and Candida albicans dual-species biofilms and on secondary caries. Methods: Firstly, the pH-responsive antimicrobial experiments including colony-forming units, scanning electron microscopy and exopoly-saccharide staining were measured. Secondly, lactic acid measurement and transverse microradiography analysis were performed to determine the preventive effect of DMAEM@RA on secondary caries. Lastly, quantitative real-time PCR was applied to investigate the antimicrobial effect of DMAEM@RA on cariogenic virulence genes. Results: DMAEM@RA significantly inhibited the growth, EPS, and acid production of Streptococcus mutans and Candida albicans dual-species biofilms under acidic environments (p < 0.05). Moreover, at pH 5 and 5.5, DMAEM@RA remarkably decreased the mineral loss and lesion depth of tooth hard tissue (p < 0.05) and down-regulated the expression of cariogenic genes, virulence-associated genes, and pH-regulated genes of dual-species biofilms (p < 0.05). Conclusions: DMAEM@RA played an antibiofilm role on Streptococcus mutans and Candida albicans dual-species biofilms, prevented the demineralization process, and attenuated cariogenic virulence in a pH-dependent manner.
PubMed: 36145446
DOI: 10.3390/pathogens11091014