-
Journal of Hazardous Materials Sep 2023Being an essential component in the plastics industry, phthalates are ubiquitous in the environment and in everyday life. They are considered environmental contaminants... (Review)
Review
Being an essential component in the plastics industry, phthalates are ubiquitous in the environment and in everyday life. They are considered environmental contaminants that have been classified as endocrine-disrupting compounds. Despite di-2-ethylhexyl phthalate (DEHP) being the most common plasticizer and the most studied to date, there are many others that, in addition to being widely used in the plastic, are also applied in the medical and pharmaceutical industries and cosmetics. Due to their wide use, phthalates are easily absorbed by the human body where they can disrupt the endocrine system by binding to molecular targets and interfering with hormonal homeostasis. Thus, phthalates exposure has been implicated in the development of several diseases in different age groups. Collecting information from the most recent available literature, this review aims to relate human phthalates' exposure with the development of cardiovascular diseases throughout all ages. Overall, most of the studies presented demonstrated an association between phthalates and several cardiovascular diseases, either from prenatal or postnatal exposure, affecting foetuses, infants, children, young and older adults. However, the mechanisms underlying these effects remain poorly explored. Thus, considering the cardiovascular diseases incidence worldwide and the constant human exposure to phthalates, this topic should be extensively studied to understand the mechanisms involved.
Topics: Pregnancy; Child; Female; Humans; Aged; Environmental Exposure; Cardiovascular Diseases; Phthalic Acids; Diethylhexyl Phthalate; Plasticizers; Plastics
PubMed: 37269565
DOI: 10.1016/j.jhazmat.2023.131680 -
International Journal of Molecular... Jan 2024Plastic production has increased dramatically, leading to accumulated plastic waste in the ocean. Marine plastics can be broken down into microplastics (<5 mm) by... (Review)
Review
Plastic production has increased dramatically, leading to accumulated plastic waste in the ocean. Marine plastics can be broken down into microplastics (<5 mm) by sunlight, machinery, and pressure. The accumulation of microplastics in organisms and the release of plastic additives can adversely affect the health of marine organisms. Biodegradation is one way to address plastic pollution in an environmentally friendly manner. Marine microorganisms can be more adapted to fluctuating environmental conditions such as salinity, temperature, pH, and pressure compared with terrestrial microorganisms, providing new opportunities to address plastic pollution. Pseudomonadota (Proteobacteria), Bacteroidota (Bacteroidetes), Bacillota (Firmicutes), and Cyanobacteria were frequently found on plastic biofilms and may degrade plastics. Currently, diverse plastic-degrading bacteria are being isolated from marine environments such as offshore and deep oceanic waters, especially spp. spp. spp. and Actinomycetes. Some marine fungi and algae have also been revealed as plastic degraders. In this review, we focused on the advances in plastic biodegradation by marine microorganisms and their enzymes (esterase, cutinase, laccase, etc.) involved in the process of biodegradation of polyethylene terephthalate (PET), polystyrene (PS), polyethylene (PE), polyvinyl chloride (PVC), and polypropylene (PP) and highlighted the need to study plastic biodegradation in the deep sea.
Topics: Microplastics; Plastics; Biodegradation, Environmental; Polyethylene; Actinobacteria; Bacteroidetes; Firmicutes
PubMed: 38203764
DOI: 10.3390/ijms25010593 -
Biology of Reproduction Feb 2021Di-isononyl phthalate (DiNP) is a high molecular weight, general purpose, plasticizer used primarily in the manufacture of polymers and consumer products. It can be... (Review)
Review
Di-isononyl phthalate (DiNP) is a high molecular weight, general purpose, plasticizer used primarily in the manufacture of polymers and consumer products. It can be metabolized rapidly and does not bioaccumulate. The primary metabolite of DiNP is monoisononyl-phthalate (MiNP) and the secondary metabolites include three oxidative derivatives of DiNP, which have been identified mainly in urine: mono-oxoisononyl phthalate (MOINP or oxo-MiNP), mono-carboxyisooctyl phthalate (MCIOP, MCOP or cx-MiNP), and mono-hydroxyisononyl phthalate (MHINP or OH-MiNP). The secondary metabolites are very sensitive biomarkers of DiNP exposure while primary metabolites are not. As the usage of DiNP worldwide increases, studies evaluating its potential reproductive toxicity are becoming more prevalent in the literature. In studies on female animals, the researchers found that the exposure to DiNP appears to induce negative effects on ovarian function and fertility in animal models. Whether or not DiNP has direct effects on the uterus is still controversial, and the effects on human reproduction require much more research. Studies on males indicate that DiNP exposure has disruptive effects on male reproduction and fertility. Occupational studies also indicate that the exposure to DiNP might induce negative effects on male reproduction, but larger cohort studies are needed to confirm this. This review presents an overview of the literature regarding the reproductive effects of exposure to DiNP.
Topics: Animals; Environmental Monitoring; Environmental Pollutants; Phthalic Acids; Plasticizers; Reproduction
PubMed: 33125036
DOI: 10.1093/biolre/ioaa201 -
Biomolecules Jun 2022Plastics are a group of synthetic materials made of organic polymers and some additives with special characteristics. Plastics have become part of our daily life due to... (Review)
Review
Plastics are a group of synthetic materials made of organic polymers and some additives with special characteristics. Plastics have become part of our daily life due to their many applications and uses. However, inappropriately managed plastic waste has raised concern regarding their ecotoxicological and human health risks in the long term. Due to the non-biodegradable nature of plastics, their waste may take several thousands of years to partially degrade in natural environments. Plastic fragments/particles can be very minute in size and are mistaken easily for prey or food by aquatic organisms (e.g., invertebrates, fishes). The surface properties of plastic particles, including large surface area, functional groups, surface topography, point zero charge, influence the sorption of various contaminants, including heavy metals, oil spills, PAHs, PCBs and DDT. Despite the fact that the number of studies on the biological effects of plastic particles on biota and humans has been increasing in recent years, studies on mixtures of plastics and other chemical contaminants in the aquatic environment are still limited. This review aims to gather information about the main characteristics of plastic particles that allow different types of contaminants to adsorb on their surfaces, the consequences of this adsorption, and the interactions of plastic particles with aquatic biota. Additionally, some missing links and potential solutions are presented to boost more research on this topic and achieve a holistic view on the effects of micro- and nanoplastics to biological systems in aquatic environments. It is urgent to implement measures to deal with plastic pollution that include improving waste management, monitoring key plastic particles, their hotspots, and developing their assessment techniques, using alternative products, determining concentrations of micro- and nanoplastics and the contaminants in freshwater and marine food-species consumed by humans, applying clean-up and remediation strategies, and biodegradation strategies.
Topics: Biodegradation, Environmental; Ecosystem; Environmental Pollutants; Microplastics; Plastics; Water Pollutants, Chemical
PubMed: 35740921
DOI: 10.3390/biom12060798 -
Environmental Science & Technology Feb 2023Increased demand for recycling plastic has prompted concerns regarding potential introduction of hazardous chemicals into recycled goods. We present a broad screening of...
Increased demand for recycling plastic has prompted concerns regarding potential introduction of hazardous chemicals into recycled goods. We present a broad screening of chemicals in 21 plastic flake and pellet samples from Canadian recycling companies. From target analysis, the organophosphorus ester flame retardants and plasticizers exhibited the highest detection frequencies (DFs) (5-100%) and concentrations (
280 chemicals were detected in recycled plastic pellets and flakes, suggesting potential incorporation into recycled goods. Individual concentrations indicate unintentional trace contamination following European Union threshold limits for recycled granules (500 mg/kg) and waste plastic flakes (1,000 mg/kg), although do not reflect toxicological thresholds, if any. Our study highlights that while recycling addresses sustainability goals, additional screening of goods and products made from recycled plastics is needed to fully document potentially hazardous chemicals and exposure. Topics: Plastics; Flame Retardants; Canada; Organic Chemicals; Hazardous Substances; Calcium
PubMed: 36787488
DOI: 10.1021/acs.est.2c07254 -
Indoor Air Nov 2019Degrading 2-ethylhexyl-containing PVC floorings (eg DEHP-PVC floorings) and adhesives emit 2-ethylhexanol (2-EH) in the indoor air. The danger of flooring degradation...
Degrading 2-ethylhexyl-containing PVC floorings (eg DEHP-PVC floorings) and adhesives emit 2-ethylhexanol (2-EH) in the indoor air. The danger of flooring degradation comes from exposing occupants to harmful phthalates plasticisers (eg DEHP), but not from 2-EH as such. Since the EU banned the use of phthalates in sensitive applications, the market is shifting to use DEHP-free and alternative types of plasticisers in PVC products. However, data on emissions from DEHP-free PVC floorings are scarce. This study aimed at assessing the surface and bulk emissions of two DEHP-free PVC floorings over three years. The floorings were glued on the screed layer of concrete casts at 75%, 85%, and 95% RH. The volatile organic compounds (VOCs) were actively sampled using FLEC (surface emissions) and micro-chamber/thermal extractor (µ-CTE, bulk emissions) onto Tenax TA adsorbents and analyzed with TD-GC-MS. 2-EH, C9-alcohols, and total volatile organic compound (TVOC) emissions are reported. Emissions at 75% and 85% RH were similar. As expected, the highest emissions occurred at 95% RH. 2-EH emissions originated from the adhesive. Because the two DEHP-free floorings tested emitted C9-alcohols at all tested RH, it makes the detection of flooring degradation harder, particularly if the adhesive used does not emit 2-EH.
Topics: Adhesives; Air Pollution, Indoor; Alcohols; Environmental Exposure; Environmental Monitoring; Floors and Floorcoverings; Hexanols; Humans; Plasticizers; Volatile Organic Compounds
PubMed: 31348556
DOI: 10.1111/ina.12591 -
Environmental Research Nov 2023Bioplastics arise as an alternative to plastic production delinked from fossil resources. However, as their demand is increasing, there is a need to investigate their...
Bioplastics arise as an alternative to plastic production delinked from fossil resources. However, as their demand is increasing, there is a need to investigate their environmental fingerprint. Here we study the toxicity of microplastics (MPLs) of two widely used materials, the polylactic acid (PLA) and the polyhydroxybutyrate (PHB) on the environmental aquatic model species Daphnia magna. The study was focused on sublethal behavioural and feeding endpoints linked to antipredator scape responses and food intake. The study aimed to test that MPLs from single-use household comercial items and among them bioplastics should be more toxic than those obtained from standard plastic polymers and fossil plastic materials due to the greater amount of plastic additives, and that MPLs should be more toxic than plastic extracts due to the contribution of both particle and plastic additive toxicity. MPLs were obtained by cryogenic grinding and sea-sand erosion to obtain irregular particles. MPL included standard polymers and nine comercial items of PLA and PHB and one fossil-based material of high-density polyethylene (HDPE). The additive content in commercial items was characterised by liquid chromatography coupled with high-resolution mass spectrometry. D. magna juveniles were exposed for 24 h to particles and their plastic extracts. Results indicated that the toxicity of bioplastic particles was five times higher than the effects produced by exposure to the content of the additives alone, that bioplastic particles were more toxic than fossil ones and that particles obtained from commercial items were more toxic than those obtained from PLA, PHB or HDPE polymer standards. Predicted toxicity from the measured plastic additives in the studied commercially available household items, however, was poorly related with the observed behavioural and feeding effects. Further research on unknown chemical components together with physical factors is need it to fully understand the mechanisms of toxicity of bioplastic materials.
Topics: Animals; Microplastics; Plastics; Daphnia; Polyethylene; Polyesters; Biopolymers; Water Pollutants, Chemical
PubMed: 37517491
DOI: 10.1016/j.envres.2023.116775 -
Toxins Jul 2021Phthalic acid esters (PAEs) are a class of lipophilic chemicals widely used as plasticizers and additives to improve various products' mechanical extensibility and... (Review)
Review
Phthalic acid esters (PAEs) are a class of lipophilic chemicals widely used as plasticizers and additives to improve various products' mechanical extensibility and flexibility. At present, synthesized PAEs, which are considered to cause potential hazards to ecosystem functioning and public health, have been easily detected in the atmosphere, water, soil, and sediments; PAEs are also frequently discovered in plant and microorganism sources, suggesting the possibility that they might be biosynthesized in nature. In this review, we summarize that PAEs have not only been identified in the organic solvent extracts, root exudates, and essential oils of a large number of different plant species, but also isolated and purified from various algae, bacteria, and fungi. Dominant PAEs identified from natural sources generally include di--butyl phthalate, diethyl phthalate, dimethyl phthalate, di(2-ethylhexyl) phthalate, diisobutyl phthalate, diisooctyl phthalate, etc. Further studies reveal that PAEs can be biosynthesized by at least several algae. PAEs are reported to possess allelopathic, antimicrobial, insecticidal, and other biological activities, which might enhance the competitiveness of plants, algae, and microorganisms to better accommodate biotic and abiotic stress. These findings suggest that PAEs should not be treated solely as a "human-made pollutant" simply because they have been extensively synthesized and utilized; on the other hand, synthesized PAEs entering the ecosystem might disrupt the metabolic process of certain plant, algal, and microbial communities. Therefore, further studies are required to elucidate the relevant mechanisms and ecological consequences.
Topics: Agriculture; China; Dibutyl Phthalate; Diethylhexyl Phthalate; Ecosystem; Environmental Pollutants; Esters; Humans; Phthalic Acids; Plasticizers; Soil; Soil Pollutants
PubMed: 34357967
DOI: 10.3390/toxins13070495 -
Molecules (Basel, Switzerland) Jun 2023In the process of production, processing, transportation, and storage of edible oils, the oils inevitably come into contact with plastic products. As a result,... (Review)
Review
In the process of production, processing, transportation, and storage of edible oils, the oils inevitably come into contact with plastic products. As a result, plasticizers migrate into edible oils, are harmful to human health, and can exhibit reproductive toxicity. Therefore, the determination of plasticizers in edible oils is very important, and a series of sample preparation methods and determination techniques have been developed for the determination of plasticizers in edible oils. Phthalic acid ester (PAE) plasticizers are the most widely used among all plasticizers. This review aims to provide a comprehensive overview of the sample preparation methods and detection techniques reported for the determination of PAEs in edible oils since 2010, focusing on sample preparation methods of edible oils combined with various separation-based analytical techniques, such as gas chromatography (GC) and liquid chromatography (LC) with different detectors. Furthermore, the advantages, disadvantages, and limitations of these techniques as well as the prospective future developments are also discussed.
Topics: Humans; Plasticizers; Phthalic Acids; Plant Oils; Esters
PubMed: 37446766
DOI: 10.3390/molecules28135106 -
Molecules (Basel, Switzerland) Oct 2022Since the outbreak of COVID-19, face masks have been introduced in the complex strategy of infection prevention and control. Face masks consist of plastic polymers and...
Since the outbreak of COVID-19, face masks have been introduced in the complex strategy of infection prevention and control. Face masks consist of plastic polymers and additives such as phthalates. The aim of this study was to evaluate the migration of microplastics (MP) and phthalates from face masks to water. Four types of masks including FFP2 masks and surgical were studied. Masks were first characterized to determine the different layers and the material used for their fabrication. Then, masks were cut into 20 pieces of 0.5 cm, including all their layers, placed in water, and the migration of MP and phthalates was evaluated according to the conditions stated in EU Regulation No 10/2011 on plastic materials and articles intended to come into contact with food. For MP, the morphological analysis (shape, dimension, particle count) was performed using a stereomicroscope, while the identification of both masks and MP released was conducted using μ-Fourier-transform infrared spectroscopy (µ-FT-IR). Migration of phthalates was assessed by ultra-high-performance liquid chromatography coupled to triple quadrupole mass spectrometer (UPLC-MS/MS). Face masks analyzed in the present study were made of atactic polypropylene (PP) as stated by the manufacturer. The μ-FT-IR confirmed that PP and polyamide (PA) were released as fragments, while both PP and polyester (PES) were released as fibers. In addition, 4 phthalates were identified at concentrations between 2.34 and 21.0 µg/mask. This study shows that the migration study can be applied to evaluate the potential release of MP and phthalates from face masks to water and could give a hint for the potential impact of their incorrect disposal on the aquatic resources.
Topics: Humans; Microplastics; Plastics; Masks; Water; Spectroscopy, Fourier Transform Infrared; Polypropylenes; Nylons; Chromatography, Liquid; COVID-19; Tandem Mass Spectrometry; Polyesters
PubMed: 36296451
DOI: 10.3390/molecules27206859