-
Journal of Orthopaedic Surgery and... Aug 2021To explore the feasibility of sacral-2-alar (S2-alar) screw placement by measuring the length, diameter, and angle of the screw trajectory on computed tomography (CT).
PURPOSE
To explore the feasibility of sacral-2-alar (S2-alar) screw placement by measuring the length, diameter, and angle of the screw trajectory on computed tomography (CT).
METHODS
This study selected 100 Han-nationality adults in northern China with a normal spine and pelvis. CT data were imported into PHILIPS software for reconstructing the 3D digital images. The optimal S2-alar screw trajectory was imitated on CT. Parameters including the length of the screw trajectory, sagittal angle, coronal angle, distance between the entry point and the spinous process, and minimum diameter of the screw trajectory were measured to evaluate the application of S2-alar screws.
RESULTS
In total, 48 males and 52 females were included. The average length of the left screw trajectory was 47.18 ± 3.91 mm. The sagittal angle was 29.06 ± 4.00°. The coronal angle was 13.31 ± 6.95°. The distance between the entry point and the spinous process was 21.0 (3.7) mm. The minimum diameter of the screw trajectory was 17.1 (2.3) mm. The average length of the right screw trajectory was 45.46 ± 4.37 mm. The sagittal angle was 23.33 ± 4.26°. The coronal angle was 14.88 ± 6.84°. The distance between the entry point and the spinous process was 22.8 (2.9) mm. The minimum diameter of the screw trajectory was 16.9 (3.1) mm. In women, the average length of the left screw trajectory was 44.80 ± 3.66 mm. The sagittal angle was 32.14 ± 5.48°. The coronal angle was 16.04 ± 7.74°. The distance between the entry point and the spinous process was 21.8 (2.8) mm. The minimum diameter of the screw trajectory was 17.1 (5) mm. The average length of the right screw trajectory was 44.01 ± 3.72 mm. The sagittal angle was 25.12 ± 5.19. The coronal angle was 16.67 ± 8.34°. The distance between the entry point and the spinous process was 21.6 (2.7) mm. The minimum diameter of the screw trajectory was 17 (4.5) mm. As seen from the data, there were significant differences in the minimum diameter of the screw trajectory in both males and females. In females, there were also significant differences between the left and right sides in the coronal angle. Between males and females, there were statistically significant differences in the length of the screw trajectory. There were no statistically significant differences in the other parameters between males and females.
CONCLUSION
The optimal screw trajectory of the S2-alar screw can be found on CT. The length and deflection angle of the screw meet the clinical requirements. This method is easy to perform and feasible for clinical application.
Topics: Bone Screws; Female; Humans; Imaging, Three-Dimensional; Male; Pelvis; Sacrum; Tomography, X-Ray Computed
PubMed: 34425863
DOI: 10.1186/s13018-021-02626-9 -
Orthopaedics & Traumatology, Surgery &... Feb 2017Lumbo-sacral (L5-S1) fusion is a widely performed procedure that has become the reference standard treatment for refractory low back pain. L5-S1 is a complex transition... (Review)
Review
Lumbo-sacral (L5-S1) fusion is a widely performed procedure that has become the reference standard treatment for refractory low back pain. L5-S1 is a complex transition zone between the mobile lordotic distal lumbar spine and the fixed sacral region. The goal is to immobilise the lumbo-sacral junction in order to relieve pain originating from this site. Apart from achieving inter-vertebral fusion, the main challenge lies in the preoperative determination of the fixed L5-S1 position that will be optimal for the patient. Many lumbo-sacral fusion techniques are available. Stabilisation can be achieved using various methods. An anterior, posterior, or combined approach may be used. Recently developed minimally invasive techniques are gaining in popularity based on their good clinical outcomes and high fusion rates. The objective of this conference is to resolve the main issues faced by spinal surgeons in their everyday practice.
Topics: Humans; Intervertebral Disc Degeneration; Low Back Pain; Lumbar Vertebrae; Minimally Invasive Surgical Procedures; Sacrum; Spinal Fusion
PubMed: 28043852
DOI: 10.1016/j.otsr.2016.06.023 -
Archives of Orthopaedic and Trauma... May 2024Lumbar lordosis can be divided into two parts by a horizontal line, creating the L1 slope and the sacral slope. Despite being a major spinopelvic parameter, the L1slope...
OBJECTIVE
Lumbar lordosis can be divided into two parts by a horizontal line, creating the L1 slope and the sacral slope. Despite being a major spinopelvic parameter, the L1slope (L1S) is rarely reported. However, there is some evidence that L1S is a relatively constant parameter. This study aimed to analyze the L1 slope and its relationships with other spinopelvic parameters.
METHODS
Standing lateral lumbosacral x-ray radiographies of 76 patients with low back pain and CT scans of 116 asymptomatic subjects were evaluated for spinal and spinopelvic parameters including L1 slope (L1S). The x-ray and CT groups were divided into subgroups according to mean sacral slope (SS) or pelvic incidence (PI) values. The mean values of the spinopelvic parameters and the correlations between them were investigated and compared.
RESULTS
L1S was 19.70 and 18.15 in low SS and high SS subgroups of x-ray respectively. L1S was 7.95 and 9.36 in low and high PI subgroups of CT, respectively, and the differences were insignificant statistically. L1S was the only spinal parameter that did not change as SS or PI increased in standing and supine positions. L1S was correlated with lumbar lordosis (LL) proximal lumbar lordosis (PLL) and distal lumbar lordosis (DLL) in both x-ray and CT groups. L1S was also the strongest correlated parameter with pelvic incidence lumbar lordosis mismatch (PI-LL) mismatch in supine position.
CONCLUSIONS
L1S is a relatively constant parameter and is around 16°-18° and 8°-9° in the standing and supine positions, respectively. It was significantly correlated with LL, PLL, DLL, and PI-LL. In the standing position it was nearly equal to PLL while this equality was present in low PI subgroups of CT. There is strong evidence that L1S is significantly correlated with health-related quality of life scores.
Topics: Humans; Male; Lumbar Vertebrae; Female; Adult; Middle Aged; Lordosis; Tomography, X-Ray Computed; Low Back Pain; Aged; Young Adult; Sacrum
PubMed: 38642160
DOI: 10.1007/s00402-024-05311-8 -
Journal of Musculoskeletal & Neuronal... Sep 2022Fatigue sacral fractures (FSFs) are rare and often misdiagnosed. This study presents a series of FSFs and a meticulous literature review. (Review)
Review
OBJECTIVES
Fatigue sacral fractures (FSFs) are rare and often misdiagnosed. This study presents a series of FSFs and a meticulous literature review.
METHODS
The present is an 11-year (2010-2021) retrospective observational study. The characteristics of all adult patients with FSF, including demographics, fracture type, treatment, history of fatigue fracture and imaging were evaluated.
RESULTS
Eight cases (6 females; 75%), suffering from 12 fractures (4 bilateral cases) with mean age=33.4 years were studied. Two patients (25%) had suffered another fatigue fracture in the past. Mean symptoms' duration prior diagnosis was 8.5 weeks, while mean symptoms' duration after diagnosis was 10.75. In most cases (7; 87.5%), MRI revealed the fracture. According to the Kaeding-Miller classification; five fractures (42%) were grade III, four (33%) IV and three (25%) II. All patients were treated conservatively, with rest and analgesics, while three received vitamin D and calcium. One patient, due to delayed union, was commenced on teriparatide.
CONCLUSIONS
FSFs are often misdiagnosed; therefore, they should be included in the differential diagnosis for chronic low back-or-hip pain in athletes. History of other fatigue injuries seems to be a predisposing factor. It is of paramount importance to obtain advanced imaging for identifying a FSF.
Topics: Adult; Female; Fractures, Stress; Humans; Observational Studies as Topic; Retrospective Studies; Sacrum; Spinal Fractures; Teriparatide
PubMed: 36046995
DOI: No ID Found -
Medicine Nov 2021This is a cross-sectional study. This study aims to describe the characteristics of sacrum vertebrae and spinopelvic parameters among the Indonesian population and...
This is a cross-sectional study. This study aims to describe the characteristics of sacrum vertebrae and spinopelvic parameters among the Indonesian population and compare them with studies from other populations. This study also intends to determine the sexual dimorphism of sacrum vertebrae and find the correlations between spinopelvic parameters.Morphometry of the sacrum is necessary for designing sacral prosthesis and instrumentations. Knowledge of spinopelvic parameters further supports the prosthesis installation procedure to restore the physiological spinal alignment of the patients. However, previous studies showed varied results among different populations. This is the first study to be conducted among the Indonesian population.Morphometric dimensions of sacrum vertebrae and the spinopelvic parameters (pelvic incidence, pelvic tilt, sacral slope, lumbar lordosis) were analyzed using thin-cut (1 mm) computed tomography images in 150 males and 150 females, aged 25 to 50 years without any spinal pathology.Generally, the size of the sacrum vertebrae was greater in males (P < .05). The sacral index, curvature index, and corporo-basal index were statistically different between genders (P < .001). Lumbar lordosis was the only spinopelvic parameter found significantly greater in females (P < .001). Significant positive correlations between all spinopelvic parameters, except for lumbar lordosis and pelvic tilt, were found in the present study (P < .001).The study serves as the first large series database of sacrum morphometric characteristics and spinopelvic parameters of the Indonesian population. There was significant gender-associated differences in various dimensions of sacrum vertebrae. The sacral index was found to be the most useful parameter for sex determination. There were strong significant positive correlations between various spinopelvic parameters. A comparison of populations revealed morphometric characteristic differences, which is proved to be critical in surgical implications.
Topics: Adult; Cross-Sectional Studies; Female; Humans; Indonesia; Lumbar Vertebrae; Male; Middle Aged; Pelvis; Sacrum; Sex Characteristics; Tomography, X-Ray Computed
PubMed: 34964781
DOI: 10.1097/MD.0000000000027955 -
Applied Health Economics and Health... Aug 2019Mepilex Border Sacrum and Heel dressings are self-adherent, multilayer foam dressings designed for use on the heel and sacrum aiming to prevent pressure ulcers. The... (Review)
Review
Mepilex Border Sacrum and Heel dressings are self-adherent, multilayer foam dressings designed for use on the heel and sacrum aiming to prevent pressure ulcers. The dressings are used in addition to standard care protocols for pressure ulcer prevention. The National Institute for Health and Care Excellence (NICE) selected Mepilex Border Sacrum and Heel dressings for evaluation. The External Assessment Centre (EAC) critiqued the company's submission. Thirteen studies (four randomised controlled trials and nine nonrandomised comparative studies) were included. The majority of studies compared Mepilex Border Sacrum dressings (plus standard care) with standard care alone. Comparative evidence for Mepilex Border Heel dressings was limited. A meta-analysis indicated a non-statistically significant difference in favour of Mepilex Border Sacrum dressings for pressure ulcer incidence [RR 0.51 (95% CI 0.22-1.18)]. The company produced a de novo cost model, which was critiqued by the EAC. After the EAC updated input parameters, cost savings of £19 per patient compared with standard care alone for pressure ulcer prevention were estimated with Mepilex Border dressings predicted to be cost saving in 57% of iterations. The Medical Technologies Advisory Committee reviewed the evidence and judged that, although Mepilex Border Heel and Sacrum dressings have potential to prevent pressure ulcers in people who are considered to be at risk in acute care settings, further evidence is required to address uncertainties around the claimed benefits of the dressings and the incidence of pressure ulcers in an NHS acute-care setting. After a public consultation, NICE published this as Medical Technology Guidance 40.
Topics: Bandages; Heel; Humans; Pressure Ulcer; Sacrum; Treatment Outcome
PubMed: 30820871
DOI: 10.1007/s40258-019-00465-8 -
Journal of Orthopaedic Surgery and... Mar 2022To rebuild a model of the pelvis and effectively simulate the trajectory of modified sacroiliac screws, we measured the parameters of each screw and screw channel and...
PURPOSE
To rebuild a model of the pelvis and effectively simulate the trajectory of modified sacroiliac screws, we measured the parameters of each screw and screw channel and assessed the safety and feasibility of the parameters in adults.
METHOD AND MATERIALS
One hundred (50 males and 50 females) normal adult pelvic computed tomography (CT) images were randomly selected and imported into Mimics software to rebuild the three-dimensional pelvis model. In these models, each ideal channel of modified screws was simulated, and then we obtained the precise parameters of screws and channels using Mimics and Three-matic software.
RESULTS
The results of the comparison (right vs. left) showed that there were no significant differences in any of the angles, radius or M1SI parameters (the first modified sacroiliac). However, one parameter (BS) of M2SI (the second modified sacroiliac), two parameters (AP and BS) of M3SI (the third modified sacroiliac), and three parameters (AP, BS, L) of M4SI (the fourth modified sacroiliac) were statistically significant (P < 0.05). The result of comparison (between genders) showed that there were no significant differences in M1SI and M2SI; in contrast, the radius, length and the α angle of M3SI and M4SI were significantly different between genders (P < 0.05), and the radius of M4SI required special attention. If the radius of the limiting screw channel was > 3.50 mm, 52 cases (52%, 24 males and 28 females) could not complete the M4SI screw placement among 100 samples. If the radius of the limiting screw channel was > 3.0 mm, a total of 10 cases (10%, 2 males and 8 females) could not complete the M4SI screw placement.
CONCLUSION
Through the measurement of 100 healthy adult real three-dimensional pelvic models, we obtained the parameters of each modified sacroiliac screw and measured the three angles of each screw based on international coordinates for the first time, which can instruct clinical application.
Topics: Bone Screws; Female; Fracture Fixation, Internal; Humans; Image Processing, Computer-Assisted; Imaging, Three-Dimensional; Male; Pelvis; Sacrum
PubMed: 35246196
DOI: 10.1186/s13018-022-03018-3 -
Ulusal Travma Ve Acil Cerrahi Dergisi =... Feb 2023Sacral fractures are uncommon and understanding three-dimensional morphology is needed to obtain proper treatment. The purpose of this study was to identify the...
BACKGROUND
Sacral fractures are uncommon and understanding three-dimensional morphology is needed to obtain proper treatment. The purpose of this study was to identify the repeatable fracture patterns and comminution zones for traumatic sacral fractures and create fracture maps.
METHODS
Computerized tomography images of 72 patients with traumatic sacral fracture were included in the study. For each fracture, fracture lines were identified and digitally reduced. All fractures were superimposed over a template and fracture maps; comminution zones and heatmaps were created for each zone.
RESULTS
There were 40 males and 32 females with a mean age of 46.5±19.9. Fifty-three (73.6%) patients sustained major trauma, and 19 (26.4%) had minor trauma. There were 37 (51.4%) Zone 1, 22 (30.6%) Zone 2, and 13 (18.1%) Zone 3 fractures. Each Denis zone showed certain fracture patterns. In Zone 1 fractures, most of the fracture lines were vertical and oblique (up to 45°) orientation on both sides. In Zone 2 fractures, fracture lines were concentrated on the S1 and S2 levels. Anterolateral and posterolateral parts of the sacrum were less affected in right-side fractures. In Zone 3 fractures, fractures were concentrated in S1, S2, and S3 levels around the sacral canal. The median sacral crest and midline remained mostly unaffected.
CONCLUSION
Sacral fractures showed specific repeatable patterns for each zone. These findings may be helpful for pre-operative planning, placement of fixation material, design of new implants, and modification of current fracture-classification systems.
Topics: Male; Female; Humans; Adult; Middle Aged; Aged; Sacrum; Fractures, Bone; Spinal Fractures; Fractures, Comminuted; Tomography, X-Ray Computed; Neck Injuries; Fracture Fixation, Internal
PubMed: 36748773
DOI: 10.14744/tjtes.2022.15163 -
International Journal of Environmental... Dec 2022An analysis of literature on the methods of assuming a sitting position and the results of our own research indicated the need to search for biomechanical parameters and...
An analysis of literature on the methods of assuming a sitting position and the results of our own research indicated the need to search for biomechanical parameters and existing relationships that would enable a description of sitting body posture. The purpose of this paper is to analyze the relationship between the alignment of the body of sternum and sacrum and the changes in the thoracic and lumbar spine curvatures in children. The study involved 113 subjects aged 9-13 years. A planned simultaneous measurement of the angle parameters of the alignment of the body of sternum and sacrum relative to the body's sagittal axis and the angle parameters of the thoracic and lumbar spine curvatures was performed during a single examination session. The proposed markers of alignment in the corrected sitting body posture are characterized by homogeneous results. A high measurement repeatability was observed when determining the corrected body posture in the study setting. It was noted that changes in the alignment of the body of sternum and sacrum resulted in changes in the thoracic kyphosis and lumbar lordosis angle values, which may be an important component of clinical observations of sitting body posture in children. Implementing the body of sternum alignment angle of about 64° relative to the body's sagittal axis in clinical practice as one of the objectives of postural education may be the target solution for sitting body posture correction in children.
Topics: Child; Humans; Lumbar Vertebrae; Spine; Sacrum; Lordosis; Kyphosis; Posture; Spinal Curvatures
PubMed: 36498356
DOI: 10.3390/ijerph192316287 -
American Journal of Biological... Apr 2022Despite the high frequency of segmentation anomalies in the human sacrum, their evolutionary and clinical implications remain controversial. Specifically,...
OBJECTIVES
Despite the high frequency of segmentation anomalies in the human sacrum, their evolutionary and clinical implications remain controversial. Specifically, inconsistencies involving the classification and counting methods obscure accurate assessment of lumbosacral transitional vertebrae. Therefore, we aim to establish more reliable morphological and morphometric methods for differentiating between sacralizations and lumbarizations in clinical and paleontological contexts.
MATERIALS AND METHODS
Using clinical CT data from 145 individuals aged 14-47 years, vertebral counts and the spatial relationship between the sacrum and adjoining bony structures were assessed, while the morphological variation of the sacrum was assessed using geometric morphometrics based on varied landmark configurations.
RESULTS
The prevalence of lumbosacral and sacrococcygeal segmentation anomalies was 40%. Lumbarizations and sacralizations were reliably distinguishable based on the spatial relationship between the iliac crest and the upward or downward trajectory of the linea terminalis on the sacrum. Different craniocaudal orientations of the alae relative to the corpus of the first sacral vertebra were also reflected in the geometric morphometric analyses. The fusion of the coccyx (32%) was frequently coupled with lumbarizations, suggesting that the six-element sacra more often incorporate the coccyx rather than the fifth lumbar vertebra.
CONCLUSIONS
Our approach allowed the consistent identification of segmentation anomalies even in isolated sacra. Additionally, our outcomes either suggest that homeotic border shifts often affect multiple spinal regions in a unidirectional way, or that sacrum length is highly conserved perhaps due to functional constraints. Our results elucidate the potential clinical, biomechanical, and evolutionary significance of lumbosacral transitional vertebrae.
Topics: Humans; Sacrum; Lumbar Vertebrae; Spinal Diseases; Lumbosacral Region; Ilium; Musculoskeletal Abnormalities
PubMed: 36787761
DOI: 10.1002/ajpa.24466