-
International Endodontic Journal Sep 2023The results of vital pulp treatments in permanent teeth have been encouraging. Currently, pulpotomy treatment for permanent teeth primarily utilizes mineral trioxide... (Meta-Analysis)
Meta-Analysis Review
BACKGROUND
The results of vital pulp treatments in permanent teeth have been encouraging. Currently, pulpotomy treatment for permanent teeth primarily utilizes mineral trioxide aggregate (MTA) as the dressing material, followed by calcium hydroxide. While other calcium-silicate-based cements have been suggested for pulpotomy, there is a limited number of studies evaluating their long-term effectiveness.
OBJECTIVES
The objective of this systematic review and meta-analysis was to evaluate the success rate of pulpotomies performed on permanent teeth, comparing the use of ProRoot MTA with that of calcium hydroxide and other bioceramic materials.
METHODS
A comprehensive search was conducted in several electronic databases, including PubMed, Cochrane Library, Scopus, Web of Science, Embase and Science Direct until December 2022. The search was guided by PICOS criteria, including only randomized clinical trials (RCTs) that evaluated the success rate of pulpotomy treatments in permanent teeth using ProRoot MTA in comparison to calcium hydroxide and other bioceramic materials. The quality of the included studies was assessed using the RoB-2 tool to evaluate the risk of bias, and relevant data were extracted and analysed in RevMan software 5.3 using fixed-effect models. The GRADE tool was used to determine the overall quality of evidence.
RESULTS
The initial search retrieved 1072 studies and, after eliminating duplicates, 677 studies were screened and 28 studies were considered for eligibility. In the final selection process, 16 studies were included in the systematic review, with 10 being determined as having a high risk of bias. Pulpotomy showed an overall mean success rate of 92% after 1 year. The meta-analysis indicated a significantly higher success rate for pulpotomies utilizing MTA in comparison with calcium hydroxide, while no significant difference was seen between MTA and calcium-enriched mixture (CEM) or Biodentine. The GRADE assessment revealed an overall low level of evidence for the included studies.
DISCUSSION
Most randomized controlled trials exhibited a significant absence of control over confounding factors.
CONCLUSIONS
This systematic review and meta-analysis demonstrate that pulpotomy is a highly effective treatment for managing permanent teeth. The results indicate that the success rate of pulpotomy using ProRoot MTA is significantly higher than when using calcium hydroxide. However, the certainty of evidence supporting these findings is low, and there is a need for well-designed RCTs to assess the long-term outcomes of pulpotomy using newer bioceramic materials.
REGISTRATION
This systematic review was registered in the PROSPERO database (registration number CRD42023393970).
Topics: Humans; Calcium Hydroxide; Pulpotomy; Calcium; Aluminum Compounds; Drug Combinations; Oxides; Randomized Controlled Trials as Topic; Calcium Compounds; Treatment Outcome; Silicates
PubMed: 37254176
DOI: 10.1111/iej.13939 -
The Journal of Prosthetic Dentistry Jul 2023Screwmentable prostheses were developed to combine the benefits of screw retention and cement retention. However, data are limited on the clinical performance of this... (Review)
Review
STATEMENT OF PROBLEM
Screwmentable prostheses were developed to combine the benefits of screw retention and cement retention. However, data are limited on the clinical performance of this type of prosthesis.
PURPOSE
The purpose of this systematic review was to collect scientific evidence on screwmentable prostheses and evaluate their long-term clinical behavior.
MATERIAL AND METHODS
An electronic search was conducted by 2 independent reviewers for articles published in scientific dental journals in English from 2004 to April 2020. The search strategy followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Inclusion criteria were scientific studies concerning the screwmentable type of prosthesis.
RESULTS
The search provided 494 records. Of these, 24 studies fulfilled the inclusion criteria and were included in the review. The included articles presented significant heterogeneity concerning the manufacturing process and the materials used. One randomized clinical trial, 2 prospective clinical studies, 14 in vitro studies, 3 protocol descriptions, 1 case series, and 3 case reports were included.
CONCLUSIONS
Based on the systematic search of the literature, it is concluded that the screwmentable prosthesis combines advantages of both cement-retained and screw-retained restorations, including passive fit, retrievability, excess cement control, tissue-friendly emergence profile, and improved esthetics. Nevertheless, data from well-designed clinical trials are limited, and further research is required to provide evidence on their long-term clinical behavior.
Topics: Dental Implants; Dental Prosthesis Retention; Prospective Studies; Dental Prosthesis, Implant-Supported; Esthetics, Dental; Dental Cements; Glass Ionomer Cements; Randomized Controlled Trials as Topic
PubMed: 34740460
DOI: 10.1016/j.prosdent.2021.08.027 -
Biomimetics (Basel, Switzerland) Aug 2023Additive manufacturing (three-dimensional (3D) printing) has become a leading manufacturing technique in dentistry due to its various advantages. However, its potential... (Review)
Review
BACKGROUND
Additive manufacturing (three-dimensional (3D) printing) has become a leading manufacturing technique in dentistry due to its various advantages. However, its potential applications for dental ceramics are still being explored. Zirconia, among ceramics, has increasing popularity and applications in dentistry mostly due to its excellent properties. Although subtractive manufacturing (3D milling) is considered the most advanced technology for the fabrication of zirconia restorations, certain disadvantages are associated with it.
METHODS
A systematic review was piloted to compare the clinical performance of zirconium crowns that were fabricated using three-dimensional (3D) milling and 3D printing. A meta-analysis was performed, and studies published up to November 2022 were identified. The terms searched were "Zirconium crowns", "3D printing", "CAD/CAM" (Computer-Aided Design and Computer-Aided Manufacturing), "Milling", "dental crowns", and "3D milling". The characteristics that were compared were the year in which the study was published, study design, age of the patient, country, the number of crowns, the type of crown fabrication, marginal integrity, caries status, and outcomes. Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were used to structure this systematic review. Out of eleven hundred and fifty titles identified after a primary search, nine articles were included in the quantitative analysis. The research question based on PICO/PECO (Participant, Intervention/exposure, Comparison, and Outcome) was "Do 3D-printed and milled (P) zirconia crowns and FDPs (I) have a better survival rate (O) when conventional prosthesis is also an option (C)"? The data collected were tabulated and compared, and the risk of bias and meta-analysis were later performed. Only nine articles (clinical research) were selected for the study. Since there were no clinical studies on the 3D printing of zirconium crowns, six in vitro studies were considered for the comparison. Zirconium crowns in the milling group had an average minimum follow-up of 6 months.
RESULTS
A moderate risk of bias was found, and survival was significant. A high heterogeneity level was noted among the studies. Marginal integrity, periodontal status, and survival rate were high. Linear regression depicted no statistical correlation between the type of cement used and the survival rate.
CONCLUSIONS
It can be concluded that the milled crowns had a higher performance and satisfactory clinical survival.
PubMed: 37754145
DOI: 10.3390/biomimetics8050394 -
Pediatric Dentistry Nov 2023to update the 2016 systematic review evidence for vital pulp therapy (VPT) for primary teeth affected by caries or trauma. The population, intervention, comparison,... (Meta-Analysis)
Meta-Analysis
to update the 2016 systematic review evidence for vital pulp therapy (VPT) for primary teeth affected by caries or trauma. The population, intervention, comparison, outcomes, and study (PICOS) design inclusion/exclusion was used for multiple databases. Risk of bias, meta-analyses using RevMan, and certainty of evidence was created. A total of 299 studies were included; no trauma was found. Indirect pulp treatment (IPT) resulted in 97 percent success. Two calcium silicate cement (CSC) pulpotomies' success using mineral trioxide aggregate (MTA) and Biodentine were 94 percent and 90 percent, respectively, greater than for direct pulp capping (DPC; 86 percent) and other pulpotomies (moderate certainty). The success of IPT versus pulpotomy at 24 months showed no significant difference (P=0.31). Different liners or capping agents did not affect the success of IPT (P=0.79) or DPC at 24 months (P=0.24). The two CSC pulpotomies were not significantly different based on 24-month success (P=0.34). The formocresol pulpotomy success at 24 months was significantly lower than for MTA (P=0.02). Ferric sulfate had a significant lower success at 24 months than MTA pulpotomy (69 percent versus 92 percent; P=0.03). Zinc oxide eugenol, as a singular pulpotomy, had low success (65 percent). Selective/stepwise caries removal did significantly better at avoiding pulp exposures than complete excavation (P<0.001). Complete, selective, and no caries removal (Hall technique [HT], steel crown placement with no caries removal) had no significant difference in pulp vitality success for deep caries at 24 months (P=0.29). For deep caries affecting vital incisors, pulpotomy had significantly greater success than pulpectomy (P=0.002). The following had no significant effect on MTA pulpotomy success: coronal pulp removal methods; irrigation solution; method to control hemorrhage; base over MTA; treatment in one or two visits; and anterior or posterior teeth. Vital pulp therapy success of indirect pulp treatment or two calcium silicate cement pulpotomies demonstrated improved success over direct pulp capping and other pulpotomies based on 24-month evidence with moderate certainty. The Hall technique did not significantly reduce pulp vitality success versus caries removal.
Topics: Humans; Calcium Compounds; Silicates; Dental Care; Dental Cements; Zinc Oxide-Eugenol Cement; Dental Pulp Capping; Pulpotomy; Glass Ionomer Cements; Tooth, Deciduous; Oxides; Drug Combinations; Treatment Outcome; Aluminum Compounds
PubMed: 38129755
DOI: No ID Found -
Journal of Dentistry Mar 2024This systematic review and network meta-analysis (NMA) aimed to establish a clinically relevant hierarchy of the different adhesive and/or restorative approaches to... (Meta-Analysis)
Meta-Analysis
AIM
This systematic review and network meta-analysis (NMA) aimed to establish a clinically relevant hierarchy of the different adhesive and/or restorative approaches to restore cavitated root caries lesions through the synthesis of available evidence.
MATERIALS AND METHODS
A systematic search was conducted in Medline/Web of Science/Embase/ Cochrane Library/Scopus/grey literature. RCTs investigating ≥2 restorative strategies (restorative /adhesive materials) for root caries lesions in adult patients were included. Risk of bias within studies was assessed (Cochrane_RoB-2) and the primary outcome was survival rate of restorations at different follow-up times (6-/12-/24-months). Network meta-analyses were conducted using a random effects model stratified by follow-up times. I-statistics assessed the ratio of true to total variance in the observed effects. All available combinations of adhesives (1-SE: one-step self-etch; 2-3ER: two-/three-step etch-and-rinse) and restorative materials (conventional composite (CC) as well as conventional and resin-modified glass ionomer cements (GIC, RMGIC)) were included. Risk of bias across studies and confidence in NMA (CINeMA) were assessed.
RESULTS
547 studies were identified and nine were eligible for the NMA. In total, 1263 root caries lesions have been restored in 473 patients in the included clinical trials. Patients involved were either healthy (n = 6 trials), living in nursing homes (n = 1 trial) or received head-and-neck radiotherapy (n = 2 trials). There was statistically weak evidence to favour either of material/material combination regarding the survival rate. A tendency for higher survival rate (24-months) was observed for 2-3ER/CC (OR 2.65; CI=1.45/4.84) as well as RMGIC (OR 2.05; CI=1.17/3.61) compared to GIC. These findings were though not statistically significant and confidence of the NMA was low.
CONCLUSION
An evidence-based choice of restorative strategy for managing cavitated root caries lesions is currently impossible. There is a clear need for more standardised, well-designed RCTs evaluating the retention rate of root caries restoration approaches.
Topics: Adult; Humans; Root Caries; Dental Cements; Network Meta-Analysis; Dental Restoration, Permanent; Dental Materials; Dental Caries; Glass Ionomer Cements; Composite Resins
PubMed: 37977410
DOI: 10.1016/j.jdent.2023.104776 -
Dentistry Journal Sep 2023Dental cements are in a constant state of evolution, adapting to better align with the intricacies of tooth structure and the dynamic movements within the oral cavity.... (Review)
Review
Dental cements are in a constant state of evolution, adapting to better align with the intricacies of tooth structure and the dynamic movements within the oral cavity. This study aims to evaluate the efficacy of zirconia-reinforced glass ionomer cement-an innovative variant of modified glass ionomer cements-in terms of its ability to withstand compressive forces and prevent microleakage during dental caries reconstruction. An extensive search was conducted across various databases, encompassing PubMed-MEDLINE, Scopus, Embase, Google Scholar, prominent journals, unpublished studies, conference proceedings, and cross-referenced sources. The selected studies underwent meticulous scrutiny according to predetermined criteria, followed by the assessment of quality and the determination of evidence levels. In total, 16 studies were incorporated into this systematic review and network meta-analysis (NMA). The findings suggest that both compomer and giomer cements exhibit greater compressive strength and reduced microleakage values than zirconia-reinforced glass ionomer cement. In contrast, resin-modified glass ionomer cement (RMGIC) and high-viscosity glass ionomer cement (GIC) demonstrate less favorable performance in these regards when compared with zirconia-reinforced glass ionomer cement.
PubMed: 37754331
DOI: 10.3390/dj11090211 -
Clinical Oral Investigations Oct 2023To compare the failure rates and the prevalence of technical complications between full-coverage tooth-supported monolithic zirconia (MZ) and porcelain-veneered zirconia... (Review)
Review
Clinical outcomes of tooth-supported monolithic zirconia vs. porcelain-veneered zirconia fixed dental prosthesis, with an additional focus on the cement type: a systematic review and meta-analysis.
PURPOSE
To compare the failure rates and the prevalence of technical complications between full-coverage tooth-supported monolithic zirconia (MZ) and porcelain-veneered zirconia (PVZ) fixed dental prosthesis, based on a systematic literature review.
METHODS
An electronic search was performed in three databases, supplemented by hand searching. Several statistical methods were used.
RESULTS
Seventy-four publications reported 6370 restorations (4264 PVZ; 2106 MZ; 8200 abutment teeth; 3549 patients), followed up until 152 months. A total of 216 prostheses failed, and survival was statistically significant different between groups. PVZ had higher occurrence of complications than MZ; the difference was especially greater for either minor or major chipping. The difference in prevalence of either minor or major chipping was statistically significant for PVZ prostheses between cementation with glass ionomer and adhesive resin cement (higher), adhesive resin and resin-modified glass ionomer cement (RMGIC, higher), and between RMGIC (higher) and glass ionomer cement. For MZ the difference was significant only for minor chipping between RMGIC (higher) and adhesive resin cement. Abutment teeth to PVZ prostheses more often lost vitality. Decementation was not observed with RMGIC. Air abrasion did not seem to clinically decrease the decementation risk. The 5-year difference in the occurrence of minor or major chipping between MZ and PVZ prostheses was statistically significant, but nor for catastrophic fracture.
CONCLUSION
Tooth-supported PVZ prostheses present higher failure and complication rates than MZ prosthesis. The difference in complications is striking when it comes to chipping.
CLINICAL RELEVANCE
Awareness of the outcome differences between different types of zirconia prostheses is important for clinical practice.
PubMed: 37626273
DOI: 10.1007/s00784-023-05219-4 -
The Journal of Prosthetic Dentistry Oct 2023Implant-supported fixed dental prostheses can be cement- or screw-retained on the implant or abutment, with advantages and disadvantages for each method. Cemented... (Review)
Review
STATEMENT OF PROBLEM
Implant-supported fixed dental prostheses can be cement- or screw-retained on the implant or abutment, with advantages and disadvantages for each method. Cemented prostheses have been associated with peri-implant disease because cement remnants act as a reservoir for bacteria and hinder biofilm control. However, contrasting evidence has been presented regarding this association based on studies with varying designs, and a systematic review and meta-analysis is required.
PURPOSE
The purpose of this systematic review and meta-analysis was to answer the focused question: In patients who received implant-supported prostheses, is the incidence of peri-implant diseases higher in cemented implant-supported prostheses than in screw-retained ones?
MATERIAL AND METHODS
The search was conducted using the National Library of Medicine (MEDLINE-PubMed), SCOPUS, EMBASE, and ISI Web of Science databases. Randomized clinical trials (RCTs) that assessed the incidence of peri-implant disease in cement- and screw-retained prostheses were included. Two authors independently screened the titles and abstracts, and analyzed the full texts, extracted data, and assessed the risk of bias. The findings were summarized using meta-analyses with random effects, and the level of certainty of the evidence was determined using the grading of recommendations, assessments, development, and evaluations (GRADE) approach.
RESULTS
The search yielded 4455 articles that met the inclusion criteria based on the title and/or abstract selection. A total of 6 RCTs were included for analysis. The meta-analysis revealed no significant difference between cement- and screw-retained prostheses for the risk of peri-implant mucositis (RR: 1.36, 95% CI: 0.42-4.38, P=.61). Similarly, no significant difference was observed between cement- and screw-retained prostheses for the incidence of peri-implantitis (RR: 1.00, 95% CI: 0.23-4.31, P=1.00).
CONCLUSIONS
Moderate certainty evidence suggests that cement- and screw-retained prostheses present a similar risk for peri-implant mucositis and peri-implantitis.
PubMed: 37793953
DOI: 10.1016/j.prosdent.2023.08.030 -
Odontology Oct 2023This systematic review evaluated the effects of nano-sized cement particles on the properties of calcium silicate-based cements (CSCs). Using defined keywords, a... (Review)
Review
This systematic review evaluated the effects of nano-sized cement particles on the properties of calcium silicate-based cements (CSCs). Using defined keywords, a literature search was conducted to identify studies that investigated properties of nano-calcium silicate-based cements (NCSCs). A total of 17 studies fulfilled the inclusion criteria. Results indicated that NCSC formulations have favourable physical (setting time, pH and solubility), mechanical (push out bond strength, compressive strength and indentation hardness) and biological (bone regeneration and foreign body reaction) properties compared with commonly used CSCs. However, the characterization and verification for the nano-particle size of NCSCs were deficient in some studies. Furthermore, the nanosizing was not limited to the cement particles and a number of additives were present. In conclusion, the evidence available for the properties of CSC particles in the nano-range is deficient-such properties could be a result of additives which may have enhanced the properties of the material.
Topics: Oxides; Materials Testing; Calcium Compounds; Silicates; Dental Cements; Glass Ionomer Cements; Drug Combinations
PubMed: 36864211
DOI: 10.1007/s10266-023-00786-0 -
The Journal of Contemporary Dental... Aug 2023The present systematic review aimed to report the studies concerning the primers in improving bond strength and identifying pertinent primers for a particular dental... (Meta-Analysis)
Meta-Analysis
AIM
The present systematic review aimed to report the studies concerning the primers in improving bond strength and identifying pertinent primers for a particular dental alloy by adhering to PRISMA precepts.
MATERIALS AND METHODS
PubMed and Semantic Scholar databases were scoured for articles using 10 search terms. studies satisfying the inclusion criteria were probed which were meticulously screened and scrutinized for eligibility adhering to the 11 exclusion criteria. The quality assessment tool for studies (QUIN Tool) containing 12 criteria was employed to assess the risk of bias (RoB).
RESULTS
A total of 48 studies assessing shear bond strength (SBS) and 15 studies evaluating tensile bond strength (TBS) were included in the qualitative synthesis. Concerning SBS, 33.4% moderate and 66.6% high RoB was observed. Concerning TBS, 26.8% moderate and 73.2% high RoB was discerned. Seventeen and two studies assessing SBS and TBS, respectively, were included in meta-analyses.
CONCLUSIONS
Shear bond strength and TBS increased for the primed alloys. Cyclic disulfide primer is best-suited for noble alloys when compared with thiol/thione primers. Phosphoric acid- and phosphonic acid ester-based primers are opportune for base alloys.
CLINICAL SIGNIFICANCE
The alloy-resin interface (ARI) would fail if an inappropriate primer was selected. Therefore, the selection of an appropriate alloy adhesive primer for an alloy plays a crucial role in prosthetic success. This systematic review would help in the identification and selection of a congruous primer for a selected alloy.
Topics: Databases, Factual; Dental Alloys; Disulfides; Thiones; Dental Cements
PubMed: 38193174
DOI: 10.5005/jp-journals-10024-3514