-
Clinical Oral Investigations Aug 2023The aim of the present randomized controlled trial (RCT) was to evaluate the efficacy of different alveolar ridge preservation (ARP) techniques on dimensional... (Randomized Controlled Trial)
Randomized Controlled Trial
OBJECTIVE
The aim of the present randomized controlled trial (RCT) was to evaluate the efficacy of different alveolar ridge preservation (ARP) techniques on dimensional alterations after tooth extraction, based on clinical measurements.
BACKGROUND
Alveolar ridge preservation (ARP) is a common procedure in every day clinical practice, when dental implants are involved in treatment planning. In ARP procedures, a bone grafting material is combined with a socket sealing (SS) material in order to compensate the alveolar ridge dimensional alterations after tooth extraction. Xenograft and allograft are the most frequently used bone grafts in ARP, while free gingival graft (FGG), collagen membrane, and collagen sponge (CS) usually applied as SS materials. The evidence comparing xenograft and allograft directly in ARP procedure is scarce. In addition, FGG is usually combined with xenograft as SS material, while the evidence combing allograft with FGG is absent. Moreover, CS could probably be an alternative choice in ARP as SS material, since it has been used in previous studies but more clinical trials are required to evaluate its effectiveness.
MATERIALS AND METHODS
Forty-one patients were randomly assigned in four treatment groups: (A) freeze-dried bone allograft (FDBA) covered with collagen sponge (CS), (B) FDBA covered with free gingival graft (FGG), (C) demineralized bovine bone mineral xenograft (DBBM) covered with FGG, and (D) FGG alone. Clinical measurements were performed immediately after tooth extraction and 4 months later. The related outcomes pertained to both vertical and horizontal assessment of bone loss.
RESULTS
Overall, groups A, B, and C presented significantly less vertical and horizontal bone resorption compared to group D. No statistically significant difference was observed between allograft and xenograft, except for the vertical bone resorption at the buccal central site, where xenograft showed marginally statistically significantly reduced bone loss compared to allograft (group C vs group B: adjusted β coef: 1.07 mm; 95%CI: 0.01, 2.10; p = 0.05). No significant differences were observed in hard tissue dimensions when CS and FGG were applied over FDBA.
CONCLUSIONS
No differences between FDBA and DBBM could practically be confirmed. In addition, CS and FGG were equally effective socket sealing materials when combined with FDBA, regarding bone resorption. More RCTs are needed to compare the histological differences between FDBA and DBBM and the effect of CS and FGG on soft tissue dimensional changes.
CLINICAL RELEVANCE
Xenograft and allograft were equally efficient in ARP 4 months after tooth extraction in horizontal level. Xenograft maintained the mid-buccal site of the socket marginally better than the allograft, in vertical level. FGG and CS were equally efficient as SS materials regarding the hard tissue dimensional alterations.
TRIAL REGISTRATION
Clinical trial registration Number: NCT04934813 (clinicaltrials.gov).
Topics: Humans; Animals; Cattle; Tooth Socket; Alveolar Process; Alveolar Bone Loss; Collagen; Tooth Extraction; Alveolar Ridge Augmentation
PubMed: 37227497
DOI: 10.1007/s00784-023-05068-1 -
Journal of Periodontal Research Oct 2023This study aimed to investigate (1) the temporal pattern of ferroptosis, an iron-dependent cell death, in ligation-induced rat periodontitis and (2) the effect of...
OBJECTIVE
This study aimed to investigate (1) the temporal pattern of ferroptosis, an iron-dependent cell death, in ligation-induced rat periodontitis and (2) the effect of ferrostatin-1, a ferroptosis inhibitor, on the model.
BACKGROUND
Ferroptosis may contribute to various diseases. However, the role of ferroptosis in periodontitis is still fully understood.
METHODS
In the first experiment, 25 rats with ligation-induced periodontitis were sacrificed on days 0, 1, 2, 7, and 10. Gingivae were obtained to determine tumor necrosis factor (TNF)-α, interleukin (IL)-1β, and ferroptotic biomarkers, including solute carrier family 3 member 2 (SLC3A2) and solute carrier family 7 member 11 (SLC7A11) and glutathione peroxidase 4 (Gpx4), via immunoblotting. Using microcomputed tomography (μCT) and histology, the periodontal soft and hard tissue lesions, including dental alveolar bone crest level, bony characteristics of the surrounding alveolus, periodontal tissue inflammation, and periodontal tissue losses, were evaluated. In study two, 16 rats with induced periodontitis were grouped according to ferrostatin-1 treatment. The rats were intraperitoneally injected with solvent or ferrostatin-1 (1.5 mg/kg/day) 1 day before ligation and sacrificed on days 7 and 10. Gingival protein changes and periodontal tissue damage were also examined.
RESULTS
In study one, SLC3A2/SLC7A11 and Gpx4 decreased since day 1; however, TNF-α/IL-1β increased on days 7 and 10. Moreover, the μCT/histology revealed resorptive bony characteristics, inflamed gingival tissue, and periodontal attachment loss. In study two, ferrostatin-1-injected rats exhibited significantly increased SLC3A2/SLC7A11 and Gpx4 but decreased TNF-α/IL-1β than vehicle rats. They also revealed lessened bone resorption, tissue inflammation, and attachment loss.
CONCLUSION
This study highlights the role of ferroptosis, via the system Xc/Gpx4 pathway, in experimental periodontitis and may serve as a regulatory strategy.
Topics: Rats; Animals; Ferroptosis; Tumor Necrosis Factor-alpha; X-Ray Microtomography; Periodontitis; Inflammation
PubMed: 37477155
DOI: 10.1111/jre.13165 -
Medicine Nov 2023Intentional replantation and dental autotransplantation are 2 similar techniques both involving atraumatic tooth extraction, visualization of the root, and replantation....
BACKGROUND
Intentional replantation and dental autotransplantation are 2 similar techniques both involving atraumatic tooth extraction, visualization of the root, and replantation. They are considered as the last resort for unsalvageable teeth. The author aims to describe 2 mandibular posterior teeth with serious periapical lesions which are resolved by intentional replantation and dental autotransplantation, respectively.
CASE SUMMARY
In case 1, a 45-year-old male patient received root canal treatment because of a cracked mandible right first molar with periapical lesions. An endodontic file was separated in the apical third of the mesiolingual root canal. After conventional canal filling of the other root canals, the molar was atraumatically extracted. The separated instrument was removed, the mesiolingual root received a retrograde filling and the molar was replanted. At the 3-month follow up, the patient was asymptomatic and the X-ray picture showed no detectable root resorption and ankylosis. In case 2, a 29-year-old woman reported discomfort during occlusal loading after a root canal treatment and a coronal restoration of the mandibular right first molar. Radiographs showed a low-density shadow in the mesial apical and in the root furcation area of the mandibular first molar so the patient was diagnosed as chronic periapical periodontitis. After the removal of the affected tooth, the extraction socket was thoroughly debrided and irrigated. The intact mandibular right third molar with similar dimensions was extracted by minimally invasive procedure and transplanted. The donor tooth was fixed by a fiber-splint for 1 month and a root canal treatment was performed 2 weeks after surgery. After 1 year, clinical and radiographical examination revealed functional and periodontal healing.
CONCLUSIONS
These 2 reports present the successful management of intentional replantation and dental autotransplantation. Both procedures are recommended after nonsurgical endodontic treatment, especially when apical microsurgery is not an option, for example because of difficult accessibility or patient preference.
Topics: Male; Female; Humans; Adult; Middle Aged; Tooth Replantation; Transplantation, Autologous; Molar; Tooth Root; Root Canal Therapy; Mandible
PubMed: 37986277
DOI: 10.1097/MD.0000000000035822 -
Transfusion Medicine and Hemotherapy :... Aug 2023The application of blood concentrates has gained popularity in dentistry in recent years. Platelet-rich fibrin (PRF) has been discussed frequently due to a high content... (Review)
Review
BACKGROUND
The application of blood concentrates has gained popularity in dentistry in recent years. Platelet-rich fibrin (PRF) has been discussed frequently due to a high content of growth factors and the option of chair-side manufacturing in a simple centrifugation process. PRF is free from adjuvants and inexpensive to produce. The number of studies reporting beneficial effects of PRF in various clinical applications such as alveolar ridge preservation, sinus floor elevation, management and prevention of medical-related osteonecrosis of the jaw, third molar extractions, and guided bone regeneration in dentistry has increased recently. However, to date, neither clinical recommendations nor guidelines are available. The present narrative review aims to summarize the level of evidence on the clinical application of PRF within the field of oral surgery and implantology.
SUMMARY
A literature search in Pubmed and Medline has identified 34 articles as a basis for this narrative review. The effectiveness of the clinical application of PRF has been analyzed for five indications within dentistry: medical-related osteonecrosis of the jaw, wisdom tooth extraction, guided bone regeneration, sinus floor elevation, and alveolar ridge preservation. The amount of data for third molar extractions, socket preservation, and guided bone regeneration is extensive. Less data were available for the use of PRF in combination with sinus floor elevations. There is a lack of studies with scientific evidence on PRF and medical-related osteonecrosis of the jaw; however, studies positively impact patient-related outcome measures. Most studies report on beneficial effects when PRF is additionally applied in intrabony defects. There is no evidence of the positive effects of PRF combined with bone graft materials during sinus floor elevation. However, some benefits are reported with PRF as a sole filling material.
KEY MESSAGES
Many recently published studies show the positive clinical impact of PRF. Yet, further research is needed to ensure the validity of the evidence.
PubMed: 37767284
DOI: 10.1159/000527526 -
Frontiers in Immunology 2024
Topics: Tooth Extraction; Bone and Bones
PubMed: 38545105
DOI: 10.3389/fimmu.2024.1394835 -
Journal of Periodontal Research Aug 2023Teeth are subject to a variety of mechanical forces and vectors. The periodontal ligament (PDL), fibrous tissue that connects the cementum of the tooth to the bony... (Review)
Review
Teeth are subject to a variety of mechanical forces and vectors. The periodontal ligament (PDL), fibrous tissue that connects the cementum of the tooth to the bony socket, plays a decisive role in transmitting force to alveolar bone via Sharpey fibers, transforming and converting these forces into biological signals. This interaction effects significant osteoblastic and osteoclastic responses via autocrine proliferative and paracrine responses. Recent discoveries of receptors for temperature and touch by the Nobel laureates David Julius and Ardem Patapoutian, respectively have a profound impact on orthodontics. Transient receptor vanilloid channel 1 (TRPV1), initially described as a receptor for temperature, has been proposed to participate in the sensing of force. TRPV4, another ion channel receptor, perceives tensile forces as well as thermal and chemical stimuli. Piezo1 and 2, the classic receptors for touch, in addition to the aforementioned receptors, have similarly been described on PDL-derived cells. In this text, we review the role of the temperature-sensitive ion channels and mechanosensitive ion channels on their biological function and influence in orthodontic treatment.
Topics: Periodontal Ligament; Temperature; Ion Channels; Dental Cementum; Mechanotransduction, Cellular
PubMed: 37291724
DOI: 10.1111/jre.13137 -
Bioengineering (Basel, Switzerland) Sep 2023The concept of extraction socket healing has been severally researched and reported over the years, since tooth extraction remains one of the most common procedures... (Review)
Review
The concept of extraction socket healing has been severally researched and reported over the years, since tooth extraction remains one of the most common procedures performed in the dental clinic. Understanding this healing process is of utmost importance because the outcome has a direct bearing on future prosthetic rehabilitation and, by extension, on patients' esthetics and masticatory function, among others. This mini review, therefore, summarized the current knowledge on the different stages of socket healing, including the biologic and clinical events that occur following tooth extraction up until the complete closure of the socket. Additionally, the modeling of the alveolar bone/process post extraction, and the resultant dimensional changes that, altogether, shape the bone, were reviewed and documented. The effects of various socket preservation interventions to mitigate these dimensional changes, and therefore preserve the alveolar process in a condition suitable for future prosthetic rehabilitation, were highlighted. Finally, a review of some of the factors that influence the entire process was also carried out.
PubMed: 37892875
DOI: 10.3390/bioengineering10101145 -
British Dental Journal May 2024Introduction In June 2020, the United Kingdom (UK) published guidance on electric scooter (e-scooter) use to ease transport congestion and reduce pollution. This study...
Introduction In June 2020, the United Kingdom (UK) published guidance on electric scooter (e-scooter) use to ease transport congestion and reduce pollution. This study aims to examine dental injuries sustained during the two years following initiation of the trial.Methods The research was conducted at a UK, Level 1, supra-regional major trauma centre. All eligible patient records were analysed to identify e-scooter-related dental injuries to the following regions: teeth, periodontium, alveolus, palate, tongue, floor of mouth, frenum, buccal mucosa and lips. To assess significant associations between recorded variables, a Pearson's chi-square test was utilised.Results Of the 32 patients who experienced a total of 71 dental injuries, 46.5% (n = 33) affected teeth, predominantly upper central incisors (n = 17). 'Lacerations' (n = 32) and 'lips' (n = 30) were the most common type and site of soft tissue injuries, respectively. Unprovoked falls by riders accounted for 53.1% (n = 17) of the injuries. There was an overall increase in e-scooter-related dental injuries throughout the two-year period.Conclusion E-scooters have introduced an additional source of dental trauma. It is imperative health care professionals can also identify signs of head and non-dental injuries when managing such patients. Further studies are warranted allowing for better informed and optimised dental public health interventions.
PubMed: 38693336
DOI: 10.1038/s41415-024-7345-4 -
Bioengineering (Basel, Switzerland) Sep 2023Dental autotransplantation is an effective alternative to conventional dental treatment, and it involves removing a tooth and repositioning it in a new position within...
Dental autotransplantation is an effective alternative to conventional dental treatment, and it involves removing a tooth and repositioning it in a new position within the same patient. Although this procedure might pose more intraoperative challenges, it provides a great solution for replacing missing teeth or aiding difficult eruption in young patients. This prospective method is also advocated as a use of treatment for unrestorable teeth. The success rates of autotransplantation cases with and without replicas were compared in a retrospective analysis of the data. By reducing donor tooth manipulation and ensuring a proper fit and positioning in the recipient socket, replicas significantly increased success rates of the procedure. CBCT scans were used to collect data. Data exported to the Mimics system were then processed in order to achieve a model of the donor tooth. Additive manufacturing technology was used to create the replicas. Specialized biocompatible material was used. Details of the replantation site and the donor tooth requirements were described, as well as the step-by-step surgical technique. For the best results, variables, like patient selection, surgical technique, and long-term monitoring, were found to be essential. The study highlights the significance of dental professionals and biomedical engineering staff working together to develop standard operating procedures and achieve predictable outcomes in autotransplantation procedures. The results suggest that 3D printed replicas could be a useful tool for improving the effectiveness and success of dental autotransplantation.
PubMed: 37760160
DOI: 10.3390/bioengineering10091058