-
The International Journal of Esthetic... Jul 2023Important changes have occurred over the last decades in the clinical application of the strategies for posterior restorations - from amalgam to composites in direct... (Review)
Review
Clinical guidelines for posterior restorations based on Coverage, Adhesion, Resistance, Esthetics, and Subgingival management. The CARES concept: Part I – partial adhesive restorations.
Important changes have occurred over the last decades in the clinical application of the strategies for posterior restorations - from amalgam to composites in direct restorations and from traditional resistance form crowns to adhesive partial restorations such as onlays. Despite much evidence available for these advances, there are still very few established guidelines for common clinical questions: When does an indirect restoration present a clinical advantage over a direct one? When should one perform adhesive cusp coverage such as an onlay? When to implement resistance form designs in adhesive restorations? Which conditions create limitations for adhesion so that a resistance form preparation with a stiffer material such as a traditional crown might be more appropriate? In order to provide clinical guidelines, the present authors consider five parameters to support and clarify decisions - Coverage of cusps, Adhesion advantages and limitations, Resistance forms to be implemented, Esthetic concerns, and Subgingival management - the CARES concept. In Part I of this three-part review article, the focus is on clinical decisions for partial adhesive restorations regarding indications for direct versus indirect materials as well as the need for cusp coverage and/or resistance form preparations based on remaining tooth structure and esthetics.
Topics: Humans; Dental Restoration, Permanent; Esthetics, Dental; Tooth; Crowns; Inlays; Composite Resins
PubMed: 37462378
DOI: No ID Found -
The International Journal of Esthetic... Oct 2023Restoration of posterior teeth with different extents of tissue loss has been a matter of debate in the literature. There are several recommendations and guidelines on...
Clinical guidelines for posterior restorations based on Coverage, Adhesion, Resistance, Esthetics, and Subgingival management. The CARES concept: Part II - full-contour resistive crowns with vertical preparation.
Restoration of posterior teeth with different extents of tissue loss has been a matter of debate in the literature. There are several recommendations and guidelines on when, how, and why to perform adhesive restorations (onlays, overlays, and endocrowns) or resistance form restorations (full-contour resistive crowns). In Part I of this three-part article series, the authors focused on adhesive partial restorations. In that article, the evidence was extensively described, and a clinically reasonable thought process was suggested for these decisions based on Coverage of susceptible cusps, Adhesion advantages and limitations, Resistance forms to be implemented, Esthetic concerns, and Subgingival management - the CARES concept. Now, in Part II, the focus is on clinical decisions for full-contour resistive crowns regarding their indications based on remaining tooth structure, materials, and different preparation designs as well as the particularities of vertical marginal preparations, perio-restorative considerations, and esthetic challenges.
Topics: Humans; Crowns; Esthetics, Dental; Inlays
PubMed: 37819563
DOI: No ID Found -
BMC Oral Health Aug 2023Large cavity designs and access cavities impair endodontically treated tooth fracture resistance. As the tooth's strength is known to reduce significantly after the root...
BACKGROUND
Large cavity designs and access cavities impair endodontically treated tooth fracture resistance. As the tooth's strength is known to reduce significantly after the root canal treatment, occlusal loading as a result of functions such as chewing, biting and certain parafunctional tendencies makes the endodontically treated tooth vulnerable to fracture. Hence, after endodontic treatment, it is vital to give adequate and appropriate restorative material to avoid tooth fractures. Accordingly, the choice of such restorative material should be dictated by the property of fracture resistance.
OBJECTIVE
The goal of this study was to conduct a systematic review and critical analysis of available data from in vitro studies examining the fracture resistance of endodontically treated posterior teeth restored with fiber-reinforced composites.
METHODOLOGY
The Preferred Reporting Items for Systematic Review and Meta-Analysis (PRIS-MA) Statement was used to guide the reporting of this systematic review A comprehensive literature search was performed using MEDLINE (via PubMed), Scopus, ScienceDirect, Google Scholar, and LILACS. A manual search of the reference lists of the articles was also performed. The databases provided a total of 796 studies from the electronic systematic search. The databases provided a total of 796 studies from the electronic systematic search. Two reviewers scrutinized the papers for eligibility based on inclusion/exclusion criteria and extracted data. The studies were assessed for their potential risk of bias. Based on modified JBI & CRIS (checklist for reporting in vitro studies) guidelines, along with the methodology and treatment objective, we have formulated 13 parameters specifically to assess the risk of bias. A total of 18 studies met the inclusion criteria and were included for qualitative analysis. Considering the high heterogeneity of the studies included, a meta-analysis could not be performed.
RESULTS
The majority of the included studies had a moderate or high risk of bias. When compared to traditional hybrid composites, fiber-reinforced composites showed increased fracture resistance of endodontically treated teeth in the majority of investigations. On the other hand, limited evidence was found for the bulk fill composites. Moreover, moderate evidence was found for the fracture resistance of inlays and fiber posts with fiber-reinforced composites for core build-up in endodontically treated teeth. No evidence could be found comparing the fracture resistance of endo crowns and fiber-reinforced composites in endodontically treated teeth.
CONCLUSION
According to the research, using fiber-reinforced composites instead of conventional hybrid composites improves the fracture resistance of endodontically treated teeth. However, there was a high risk of bias in the research considered. No judgments could be reached about the superiority of one material over another based-on comparisons between other core restorations.
Topics: Humans; Tooth, Nonvital; Dental Materials; Crowns; Tooth Fractures; Composite Resins; Dental Stress Analysis
PubMed: 37574536
DOI: 10.1186/s12903-023-03217-2 -
Polymers Oct 2023As cementation represents the last stage of the work involved in making various indirect restorations (metal ceramic crowns and bridges, full ceramic crowns and bridges,... (Review)
Review
As cementation represents the last stage of the work involved in making various indirect restorations (metal ceramic crowns and bridges, full ceramic crowns and bridges, inlays, onlays, and fiber posts), its quality significantly contributes to the clinical success of the therapy performed. In the last two decades, the demand for ceramic indirect restorations in everyday dental practice has considerably increased primarily due to the growing significance of esthetics among patients, but also as a result of hypersensitivity reactions to dental alloys in some individuals. In this context, it is essential to ensure a permanent and reliable adhesive bond between the indirect restoration and the tooth structure, as this is the key to the success of aesthetic restorations. Resin-based luting materials benefit from excellent optical (aesthetic) and mechanical properties, as well as from providing a strong and durable adhesive bond between the restoration and the tooth. For this reason, resin cements are a reliable choice of material for cementing polycrystalline ceramic restorations. The current dental material market offers a wide range of resin cement with diverse and continually advancing properties. In response, we wish to note that the interest in the properties of resin-based cements among clinicians has existed for many years. Yet, despite extensive research on the subject and the resulting continued improvements in the quality of these materials, there is still no ideal resin-based cement on the market. The manuscript authors were guided by this fact when writing the article content, as the aim was to provide a concise overview of the composition, properties, and current trends, as well as some future guidelines for research in this field that would be beneficial for dental practitioners as well as the scientific community. It is extremely important to provide reliable and succinct information and guidelines for resin luting materials for dental dental practitioners.
PubMed: 37896400
DOI: 10.3390/polym15204156 -
Taiwan Journal of Ophthalmology 2023Femtosecond laser (FSL) applications in corneal surgery have increased since its inception. Corneal surgery has undergone a tremendous transformation thanks to the... (Review)
Review
Femtosecond laser (FSL) applications in corneal surgery have increased since its inception. Corneal surgery has undergone a tremendous transformation thanks to the introduction of FSL technology. This laser makes precise, three-dimensional incisions while causing minimal damage to surrounding tissue. This review updates and summarizes current and upcoming FSL applications in corneal surgery, current commercially available FSL, and its respective applications. Refractive surgery applications include laser keratomileusis flaps, refractive corneal lenticule extraction such as small incision lenticule extraction, astigmatic keratotomy, intracorneal ring segments tunnels for keratoconus including corneal allogenic intrastromal ring segments, and presbyopia treatments with intrastromal pockets for corneal inlays and intrastromal incisions (INTRACOR). Keratoplasty applications include penetrating keratoplasty trephination; superficial and deep anterior lamellar keratoplasty trephination, lamellar dissection, and tunnel creation; posterior lamellar keratoplasty donor and recipient preparation; Bowman layer transplantation donor, and recipient preparation; and stromal keratophakia. Other applications include conjunctival graft preparation in pterygium surgery, and keratopigmentation (corneal tattooing). FSL is a surgical instrument widely used in corneal surgery because it improves reproducibility and safety in many procedures.
PubMed: 38089509
DOI: 10.4103/tjo.TJO-D-23-00083 -
Journal of the Mechanical Behavior of... Oct 2023The objective of this study was to determine the influence of different preparation designs on the fracture strength, failure type, repairability, formation of...
PURPOSE
The objective of this study was to determine the influence of different preparation designs on the fracture strength, failure type, repairability, formation of polymerization-induced cracks, and tooth deformation of structurally compromised molars restored with lithium disilicate inlays and overlays in combination with Immediate Dentin Sealing (IDS).
MATERIAL AND METHODS
Human molars (N = 64) were randomly assigned to four different preparation designs: Undermined Inlay (UI), Extended Inlay (EI), Restricted Overlay (RO), and Extended Overlay (EO). The teeth were restored using lithium disilicate partial restorations and subjected to thermomechanical fatigue in a chewing simulator (1,2 × 10 (Mondelli et al., 2007) cycles on 50 N, 8000x 5-55 °C), followed by load to failure testing. In silico finite element analysis was conducted to assess tooth deformation. Polymerization-induced cracks were evaluated using optical microscopy and transillumination. Fracture strengths were statistically analyzed using a Kruskal-Wallis test, while the failure mode, repairability, and polymerization cracks were analyzed using Fisher exact test.
RESULTS
The propagation of polymerization-induced cracks did not significantly differ among preparation designs. All specimens withstood chewing simulator fatigue, with no visible cracks in teeth or restorations. Fracture strength was significantly influenced by preparation design, with restricted overlay (RO) showing higher fracture strength compared to extended inlay (EI) (p = .042). Tooth deformation and fracture resistance correlated between in vitro and in silico analyses). UI exhibited a statistically less destructive failure pattern than EO (p < .01) and RO (p = .036). No statistically significant influence of the preparation design on repairability was observed. Groups with higher repairability rates experienced increased tooth deformation, leading to less catastrophic failures.
CONCLUSIONS
The preparation design affected the fracture strength of compromised molars restored with lithium disilicate inlays and overlays, with significantly lower fracture strength for an extended inlay. The failure pattern of lithium disilicate overlays is significantly more destructive than that of undermined and extended inlays. The finite element analysis showed more tooth deformation in the inlay restorations, with lower forces in the roots, leading to less destructive fractures. Since cusp coverage restorations fracture in a more destructive manner, this study suggests the undermined inlay preparation design as a viable option for restoring weakened cusps.
Topics: Humans; Flexural Strength; Molar; Dental Porcelain; Fatigue; Fractures, Bone
PubMed: 37659167
DOI: 10.1016/j.jmbbm.2023.106096 -
The Journal of Prosthetic Dentistry Sep 2023A consensus on whether a fully digital workflow can replace conventional methods of manufacturing partial-coverage restorations is lacking. (Review)
Review
STATEMENT OF PROBLEM
A consensus on whether a fully digital workflow can replace conventional methods of manufacturing partial-coverage restorations is lacking.
PURPOSE
The purpose of this systematic review was to evaluate the accuracy, fit, and clinical outcomes of inlay, onlay, overlay, and endocrown restorations obtained with both digital and conventional workflows.
MATERIAL AND METHODS
This study complied with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines and was registered in the International Prospective Register of Systematic Reviews database (CRD42021258696). Studies evaluating the accuracy, fit, and clinical outcomes of inlay, onlay, overlay, and endocrown restorations obtained with digital and conventional workflows were included from 5 databases searched in November 2022. The Checklist for Reporting Randomized Clinical Studies (ROB 2) and the Checklist for Reporting In vitro Studies (CRIS guidelines) were used to assess the risk of bias.
RESULTS
Twenty-three studies were included in this review. Sixteen studies evaluated marginal and internal fit, 5 evaluated accuracy, 3 evaluated fracture resistance, and 1 evaluated long-term clinical performance. Although most studies reported acceptable clinical outcomes for both workflows, 11 studies showed better results with the conventional workflow, 10 with the digital workflow, and 2 reported that the outcomes of the workflows were similar.
CONCLUSIONS
Clinically acceptable values have been reported for the parameters evaluated in both digital and conventional workflows, and no consensus has been reached regarding the more efficient method.
PubMed: 37716898
DOI: 10.1016/j.prosdent.2023.08.005 -
Compendium of Continuing Education in... Oct 2023Surgical crown lengthening (SCL) is the treatment of choice to ensure healthy tissues when subgingival tooth defects encroach on the biologic width.1 However,...
Surgical crown lengthening (SCL) is the treatment of choice to ensure healthy tissues when subgingival tooth defects encroach on the biologic width.1 However, restorative techniques employing adhesive dentistry may provide viable alternatives to or complement SCL in select cases without the repercussions of surgical bone removal and open interproximal spaces. One such clinical technique, deep margin elevation (DME), employs a direct restoration to relocate the cervical margin of small subgingival defects of posterior teeth supragingivally. The "elevated" margin simplifies impression-making and bonding of indirect restorations, especially inlays and onlays. Recent scientific systematic literature reviews indicate favorable clinical outcomes and suggest that DME restorations made with scrupulous care have high success rates and are compatible with periodontal health. Optimal working field isolation, meticulous placement of matrices, proper bonding and buildup procedure, as well as regular maintenance and follow-up are essential for success. This article provides an overview of this approach.
Topics: Dental Restoration, Permanent; Crown Lengthening; Dental Cements; Inlays; Crowns
PubMed: 37850958
DOI: No ID Found -
Journal of Clinical Periodontology Nov 2023To systematically appraise the available evidence on vertical ridge augmentation (VRA) techniques and estimate a treatment-based ranking on the incidence of... (Meta-Analysis)
Meta-Analysis Review
Comparative evidence of different surgical techniques for the management of vertical alveolar ridge defects in terms of complications and efficacy: A systematic review and network meta-analysis.
AIM
To systematically appraise the available evidence on vertical ridge augmentation (VRA) techniques and estimate a treatment-based ranking on the incidence of complications as well as their clinical effectiveness.
MATERIALS AND METHODS
Searches were conducted in six databases to identify randomized clinical trials comparing VRA techniques up to November 2022. The incidence of complications (primary) and of early, major, surgical and intra-operative complications, vertical bone gain (VBG), marginal bone loss, need for additional grafting, implant success/survival, and patient-reported outcome measures (secondary) were chosen as outcomes. Direct and indirect effects and treatment ranking were estimated using Bayesian pair-wise and network meta-analysis (NMA) models.
RESULTS
Thirty-two trials (761 participants and 943 defects) were included. Five NMA models involving nine treatment groups were created: onlay, inlay, dense-polytetrafluoroethylene, expanded-polytetrafluoroethylene, titanium, resorbable membranes, distraction osteogenesis, tissue expansion and short implants. Compared with short implants, statistically significant higher odds ratios of healing complications were confirmed for all groups except those with resorbable membranes (odds ratio 5.4, 95% credible interval 0.92-29.14). The latter group, however, ranked last in clinical VBG.
CONCLUSIONS
VRA techniques achieving greater VBG are also associated with higher incidence of healing complications. Guided bone regeneration techniques using non-resorbable membranes yield the most favourable results in relation to VBG and complications.
Topics: Humans; Dental Implantation, Endosseous; Bayes Theorem; Network Meta-Analysis; Alveolar Ridge Augmentation; Alveolar Process; Bone Regeneration; Polytetrafluoroethylene; Bone Transplantation; Membranes, Artificial; Dental Implants; Guided Tissue Regeneration, Periodontal
PubMed: 37495541
DOI: 10.1111/jcpe.13850 -
European Journal of Dentistry Oct 2023This article compares and evaluates the marginal and internal fitness and three-dimensional (3D) accuracy of class II inlays fabricated using Tescera (TS) resin,...
OBJECTIVE
This article compares and evaluates the marginal and internal fitness and three-dimensional (3D) accuracy of class II inlays fabricated using Tescera (TS) resin, milling of hybrid and zirconia blocks, and 3D printing with NextDent C&B.
MATERIALS AND METHODS
Fifty-two mesio-occlusal inlays were fabricated using conventional method with TS, milling of Lava Ultimate (LU), milling of Zolid Fx multilayer (ZR), and 3D printing ( = 13 each). The marginal and internal fitness were evaluated at six points in the mesio-distal section of a replica under a digital microscope (160× magnification), and the accuracy was evaluated using 3D software. Analyses were conducted using -test, one-way analysis of variance (ANOVA) and two-way ANOVA, while Duncan's multiple range test was used for post hoc analyses ( = 0.05).
RESULTS
The marginal and internal fitness of the 3D and ZR were significantly superior to that of the TS and LU. For LU, ZR, and 3D, a significant discrepancy between the marginal gap and internal gap was observed ( < 0.05). On evaluating accuracy, trueness was significantly higher in ZR than in TS and LU; precision was significantly higher in 3D and ZR than in TS and LU ( < 0.05).
CONCLUSION
The marginal and internal fitness and the accuracy of TS, ZR, and 3D were within the clinically acceptable range. The marginal and internal fitness and accuracy of 3D were better than those of TS and LU, which are commonly used in dentistry. There is immense potential for using 3D-printed inlays in routine clinical practice.
PubMed: 36599450
DOI: 10.1055/s-0042-1758796