-
International Journal of Molecular... Jul 2023Green leaf volatiles (GLVs), including short chain volatile aldehydes, are widely used in the flavor and food industries because of their fresh aroma. To meet the...
Green leaf volatiles (GLVs), including short chain volatile aldehydes, are widely used in the flavor and food industries because of their fresh aroma. To meet the growing demand for natural GLVs with high added value, the use of biocatalytic processes appears as a relevant application. In such processes, vegetable oils are bioconverted into GLVs. First, the triacylglycerols of the oils are hydrolyzed by a lipase. Then, the free polyunsaturated fatty acids are converted by a lipoxygenase. Finally, volatile C6 or C9 aldehydes and 9- or 12-oxoacids are produced with a hydroperoxide lyase. Optimization of each biocatalytic step must be achieved to consider a scale-up. In this study, three oils (sunflower, hempseed, and linseed oils) and three lipases (, , and lipases) have been tested to optimize the first step of the process. The experimental design and response surface methodology (RSM) were used to determine the optimal hydrolysis conditions for each oil. Five factors were considered, i.e., pH, temperature, reaction duration, enzyme load, and oil/aqueous ratio of the reaction mixture. lipase was selected as the most efficient enzyme to achieve conversion of 96 ± 1.7%, 97.2 ± 3.8%, and 91.8 ± 3.2%, respectively, for sunflower, hempseed, and linseed oils under the defined optimized reaction conditions.
Topics: Lipase; Hydrolysis; Plant Oils; Biocatalysis; Linseed Oil; Fatty Acids, Nonesterified; Aldehydes
PubMed: 37569649
DOI: 10.3390/ijms241512274 -
Spectrochimica Acta. Part A, Molecular... Dec 2023Candida rugosa lipase (CRL, EC3.1.1.3) is one of the main enzymes synthesizing esters, and ZIF-8 was chosen as an immobilization carrier for lipase. Enzyme activity...
Candida rugosa lipase (CRL, EC3.1.1.3) is one of the main enzymes synthesizing esters, and ZIF-8 was chosen as an immobilization carrier for lipase. Enzyme activity testing often requires expensive reagents as substrates, and the experiment processes are time-consuming and inconvenient. As a result, a novel approach based on near-infrared spectroscopy (NIRs) was developed for predicting CRL/ZIF-8 enzyme activity. The absorbance of the immobilized enzyme catalytic system was evaluated using UV-Vis spectroscopy to investigate the amount of CRL/ZIF-8 enzyme activity. The powdered samples' near-infrared spectra were obtained. The sample's enzyme activity data were linked with each sample's original NIR spectra to establish the NIR model. A partial least squares (PLS) model of immobilized enzyme activity was developed by coupling spectral preprocessing with a variable screening technique. The experiments were completed within 48 h to eliminate inaccuracies between the reduction in enzyme activity with increasing laying-aside time throughout the test and the NIRs modeling. The root-mean-square error of cross-validation (RMSECV), the correlation coefficient of validation set (R) value, and the ratio of prediction to deviation (RPD) value were employed as assessment model indicators. The near-infrared spectrum model was developed by merging the best 2nd derivative spectral preprocessing with the Competitive Adaptive Reweighted Sampling (CARS) variable screening method. This model's root-mean-square error of cross-validation (RMSECV) was 0.368 U/g, the correlation coefficient of calibration set (R_cv) value was 0.943, the root-mean-square error of prediction (RMSEP) set was 0.414 U/g, the correlation coefficient of validation set (R) value was 0.952, and the ratio of prediction to deviation (RPD) was 3.0. The model demonstrates that the fitting relationship between the predicted and the reference enzyme activity value of the NIRs is satisfactory. The findings revealed a strong relationship between NIRs and CRL/ZIF-8 enzyme activity. As a result, the established model could be implemented to quantify the enzyme activity of CRL/ZIF-8 quickly by including more variations of natural samples. The prediction method is simple, rapid, and adaptable to be the theoretical and practical basis for further studying other interdisciplinary research work in enzymology and spectroscopy.
Topics: Spectroscopy, Near-Infrared; Enzymes, Immobilized; Least-Squares Analysis; Calibration
PubMed: 37390722
DOI: 10.1016/j.saa.2023.123072 -
Mikrochimica Acta Nov 2023A sensitive and accurate chemiluminescence (CL) method was developed for one-step determination of diphenyl ether herbicides at trace level with nitrofen...
A sensitive and accurate chemiluminescence (CL) method was developed for one-step determination of diphenyl ether herbicides at trace level with nitrofen (2,4-dichlorophenyl-p-nitrophenyl ether) as a model analyte. Candida rugosa lipase (CRL) was immobilized on a nanocarrier of amine-linked covalent organic framework (named as COF-300-AR) through a self-assembly strategy. The formed nanocomposite of COF-300-AR@CRL owns dual enzymatic catalytic activities. It can directly catalyze luminol-dissolved oxygen reaction to produce an intense CL emission by virtue of oxidase mimic activity of COF-300-AR but also effectively decompose nitrofen to release phenolic compounds by the immobilized CRL. The released phenolic compounds own strong reducing capacity and in turn decrease the CL signal sharply. Under the optimal conditions, the decreased CL intensity presents a good linear response to nitrofen concentration in the 0.02-50.0 μM range. The limit of detection (LOD, 3s/S) is 11 nM and the precision is 2.0% for replicate measurements of 50.0 nM nitrofen solution (n = 11). This method has the advantages of rapid analytical efficiency, good selectivity, satisfactory stability, and recyclability. Recovery experiments were conducted on spiked vegetable and fruit samples with the recoveries falling in the range 90.0-107.0%.
Topics: Vegetables; Fruit; Phenyl Ethers; Phenols; Herbicides; Lipase
PubMed: 38032482
DOI: 10.1007/s00604-023-06077-3 -
Molecules (Basel, Switzerland) May 2024The development of immobilized enzymes with high activity and stability is critical. Metal-organic frameworks (MOFs) have attracted much academic and industrial interest...
The development of immobilized enzymes with high activity and stability is critical. Metal-organic frameworks (MOFs) have attracted much academic and industrial interest in the field of enzyme immobilization due to their unique properties. In this study, the amino-functionalized ionic liquid (NIL)-modified metal-organic framework (UiO-66-NH) was prepared to immobilize lipase (CRL), using dialdehyde starch (DAS) as the cross-linker. The results of the Fourier transform infrared (FT-IR) spectra, X-ray powder diffraction (XRD), and scanning electronic microscopy (SEM) confirmed that the NIL was successfully grafted to UiO-66-NH. The CRL immobilized on NIL-modified UiO-66-NH (UiO-66-NH-NIL-DAS@CRL) exhibited satisfactory activity recovery (79.33%), stability, reusability, and excellent organic solvent tolerance. The research results indicated that ionic liquid-modified UiO-66-NH had practical potential for application in enzyme immobilization.
Topics: Lipase; Ionic Liquids; Enzymes, Immobilized; Metal-Organic Frameworks; Enzyme Stability; Spectroscopy, Fourier Transform Infrared; X-Ray Diffraction; Starch; Saccharomycetales; Phthalic Acids
PubMed: 38792242
DOI: 10.3390/molecules29102381 -
Journal of the Science of Food and... Dec 2023Pine sterol ester is a type of novel food source nutrient with great advantages in lowering blood cholesterol levels, inhibiting tumors, preventing prostate enlargement,...
BACKGROUND
Pine sterol ester is a type of novel food source nutrient with great advantages in lowering blood cholesterol levels, inhibiting tumors, preventing prostate enlargement, and regulating immunity. Macroporous resins with large specific surface area, stable structures, and various functional groups (epoxy, amino, and octadecyl groups) have been selected for immobilization of Candida rugosa lipase (CRL) to improve its stability and efficiency in the synthesis of pine sterol esters. A solvent-free strategy using oleic acid (substrate) as an esterification reaction medium is an important alternative for avoiding the use of organic solvents.
RESULTS
The immobilization conditions of CRL immobilized on several types of commercial macroporous resins were optimized. Fortunately, by adsorption (hydrophobic interaction), a high immobilization efficiency of CRL was obtained using macroporous resins with hydrophobic octadecyl groups with an immobilization efficiency of 86.5%, enzyme loading of 138.5 mg g and enzyme activity of 34.7 U g . The results showed that a 95.1% yield could be obtained with a molar ratio of oleic acid to pine sterol of 5:1, an enzyme amount of 6.0 U g (relative to pine sterol mass) at 50 °C for 48 h.
CONCLUSION
The hydrophobic macroporous resin (ECR8806M) with a large specific surface area and abundant functional groups was used to achieve efficient immobilization of CRL. CRL@ECR8806M is an efficient catalyst for the synthesis of phytosterol esters and has the potential for further large-scale applications. Therefore, this simple, green, and low-cost strategy for lipase immobilization provides new possibilities for the high-efficiency production of pine sterol esters and other food source nutrients. © 2023 Society of Chemical Industry.
Topics: Lipase; Solvents; Enzymes, Immobilized; Oleic Acid; Biocatalysis; Candida; Sterols; Hydrophobic and Hydrophilic Interactions; Enzyme Stability; Esters
PubMed: 37467367
DOI: 10.1002/jsfa.12869 -
International Journal of Biological... Dec 2023Lipase adsorption on solid supports can be mediated by a precise balance of electrostatic and hydrophobic interactions. A suitable fine-tuning could allow the...
Lipase adsorption on solid supports can be mediated by a precise balance of electrostatic and hydrophobic interactions. A suitable fine-tuning could allow the immobilized enzyme to display high catalytic activity. The objective of this work was to investigate how pH and ionic strength fluctuations affected protein-support interactions during immobilization via physical adsorption of a Candida rugosa lipase (CRL) on MgFeO. The highest amount of immobilized protein (IP) was measured at pH 4, and an ionic strength of 90 mM. However, these immobilization conditions did not register the highest hydrolytic activity (HA) in the biocatalyst (CRLa@MgFeO), finding the best values also at acidic pH but with a slight shift towards higher values of ionic strength around 110 mM. These findings were confirmed when the adsorption isotherms were examined under different immobilization conditions so that the maximum measurements of IP did not coincide with that of HA. Furthermore, when the recovered activity was examined, a strong interfacial hyperactivation of the lipase was detected towards acidic pH and highly charged surrounding environments. Spectroscopic studies, as well as in silico molecular docking analyses, revealed a considerable involvement of surface hydrophobic protein-carrier interactions, with aromatic aminoacids, especially phenylalanine residues, playing an important role. In light of these findings, this study significantly contributes to the body of knowledge and a better understanding of the factors that influence the lipase immobilization process on magnetic inorganic oxide nanoparticle surfaces.
Topics: Lipase; Molecular Docking Simulation; Candida; Enzymes, Immobilized; Nanoparticles; Enzyme Stability
PubMed: 37652323
DOI: 10.1016/j.ijbiomac.2023.126615 -
Microbial Biotechnology Feb 2024The yeast Komagataella phaffii (Pichia pastoris) is currently considered a versatile and highly efficient host for recombinant protein production (RPP). Interestingly,...
The yeast Komagataella phaffii (Pichia pastoris) is currently considered a versatile and highly efficient host for recombinant protein production (RPP). Interestingly, the regulated application of specific stress factors as part of bioprocess engineering strategies has proven potential for increasing the production of recombinant products. This study aims to evaluate the impact of controlled oxygen-limiting conditions on the performance of K. phaffii bioprocesses for RPP in combination with the specific growth rate (μ) in fed-batch cultivations. In this work, Candida rugosa lipase 1 (Crl1) production, regulated by the constitutive GAP promoter, growing at different nominal μ (0.030, 0.065, 0.100 and 0.120 h ) under both normoxic and hypoxic conditions in carbon-limiting fed-batch cultures is analysed. Hypoxic fermentations were controlled at a target respiratory quotient (RQ) of 1.4, with excellent performance, using an innovative automated control based on the stirring rate as the manipulated variable developed during this study. The results conclude that oxygen limitation positively affects bioprocess efficiency under all growing conditions compared. The shift from respiratory to respiro-fermentative metabolism increases bioprocess productivity by up to twofold for the specific growth rates evaluated. Moreover, the specific product generation rate (q ) increases linearly with μ, regardless of oxygen availability. Furthermore, this hypoxic boosting effect was also observed in the production of Candida antarctica lipase B (CalB) and pro-Rhizopus oryzae lipase (proRol), thus proving the synergic effect of kinetic and physiological stress control. Finally, the Crl1 production scale-up was conducted successfully, confirming the strategy's scalability and the robustness of the results obtained at the bench-scale level.
Topics: Pichia; Recombinant Proteins; Lipase; Oxygen; Saccharomycetales
PubMed: 38376073
DOI: 10.1111/1751-7915.14411 -
Journal of Biotechnology May 2024Enzyme immobilization in membrane bioreactors has been considered as a practical approach to enhance the stability, reusability, and efficiency of enzymes. In this...
Enzyme immobilization in membrane bioreactors has been considered as a practical approach to enhance the stability, reusability, and efficiency of enzymes. In this particular study, a new type of hybrid membrane reactor was created through the phase inversion method, utilizing hybrid of graphene oxide nanosheets (GON) and polyether sulfone (PES) in order to covalently immobilize the Candida rugosa lipase (CRL). The surface of hybrid membrane was initially modified by (3-Aminopropyl) triethoxysilane (APTES), before the use of glutaraldehyde (GLU), as a linker, through the imine bonds. The resulted enzymatic hybrid membrane reactors (EHMRs) were then thoroughly analyzed by using field-emission scanning electron microscopy (FE-SEM), contact angle goniometry, surface free energy analysis, X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, attenuated total reflection (ATR), and energy-dispersive X-ray (EDX) spectroscopy. The study also looked into the impact of factors such as initial CRL concentration, storage conditions, and immobilization time on the EHMR's performance and activity, which were subsequently optimized. The results demonstrated that the CRLs covalently immobilized on the EHMRs displayed enhanced pH and thermal stability compared to those physically immobilized or free. These covalently immobilized CRLs could maintain over 60% of their activity even after 6 reaction cycles spanning 50 days. EHMRs are valuable biocatalysts in developing various industrial, environmental, and analytical processes.
Topics: Enzymes, Immobilized; Lipase; Enzyme Stability; Bioreactors; Membranes, Artificial; Graphite; Saccharomycetales; Glutaral; Spectroscopy, Fourier Transform Infrared; Fungal Proteins; Temperature; X-Ray Diffraction
PubMed: 38548020
DOI: 10.1016/j.jbiotec.2024.03.012