-
European Journal of Dentistry Jul 2023This study aimed to evaluate the effectiveness of conventional occlusal analysis in contrast with digital occlusal analysis in natural dentition. Occlusal analysis...
This study aimed to evaluate the effectiveness of conventional occlusal analysis in contrast with digital occlusal analysis in natural dentition. Occlusal analysis allows the identification of normal and abnormal occlusal contact points that alter the craniomandibular cervical system. We searched for articles with keywords [[dental occlusion]], [[natural dentition]], [[occlusal adjustment]], [[Immediate Complete Anterior Guidance Development]] [[mastication]], [[bite force]], [[premature contact]], [[occlusal balance]] [[articulating paper]]], [[spray]], [[Occlusal contacts]], and [[bite strength]]. They were considered observational , odds ratio and case control studies. We found 189 items. After evaluating the abstracts and full texts of the articles, 10 papers met the inclusion criteria. It was found that occlusal analysis allows the identification of the relationship between poor occlusion and the sensitivity of the teeth due to occlusal trauma, which is also related to temporomandibular joint pain in dynamic occlusion. The contacts of greater strength were observed in nonfunctional cusps, 48%, without ruling out the functional cusps, 24%. Despite being the universal method of occlusal control to date, the use of joint paper, remains subjective compared to the digital occlusal control device. Posture is considered directly related to occlusal trauma and temporomandibular disorders; without proper occlusal analysis, a clear diagnosis of the patient's joint condition cannot be obtained. Digital occlusal analysis is more objective than traditional occlusal analysis.
PubMed: 36252609
DOI: 10.1055/s-0042-1755626 -
International Journal of Computerized... Nov 2023To evaluate the accuracy and reproducibility of real and virtual occlusal contact points in implant-supported, fixed complete dentures.
AIM
To evaluate the accuracy and reproducibility of real and virtual occlusal contact points in implant-supported, fixed complete dentures.
MATERIALS AND METHODS
The study included 19 participants using mandibular interim complete-arch fixed prosthesis supported by 3 or 4 implants as opposed to conventional removable complete dentures. At installation, an examiner installed the prostheses and verified the occlusal contact points through 2 methods: recording the real contact points with carbon paper (RC) followed by occlusal photography and intraoral scanning (VC) to record the virtual contact points to obtain a screen print of the software. Then, the two images were randomized to determine the order to be inserted into Microsoft PowerPoint for blind and paired evaluation. The independent variables consisted of the distribution of occlusal contacts points (qualification through pre-defined scores based on the position of the contact points on the surfaces of the teeth) and the reproducibility of the methods by verifying the number of occlusal points. For this, a descriptive analysis was used to evaluate the distribution of occlusal contacts points and the Wilcoxon test for the reproducibility of the occlusal contact points between the methods (p<0.05).
RESULTS
The methods had 100% and 73.6% real and virtual occlusal contact points, respectively, which is considered clinically excellent. There was no significant difference regarding the reproducibility of the methods by the number of occlusal contact points (RC: x̅13.32; VC: x̅13.68; p=0.715).
CONCLUSION
The use of the tested intraoral scanner can be an easy and fast tool for studying and mapping the occlusion, and storing data for future treatment, with the conventional method being the preferred method for performing the occlusal adjustment.
PubMed: 37947209
DOI: 10.3290/j.ijcd.b4626921 -
Zhonghua Kou Qiang Yi Xue Za Zhi =... Oct 2023Rehabilitation of complete edentulism is naturally related to temporomandibular joint (TMJ) since the proper functioning of complete denture depends on the normal... (Review)
Review
Rehabilitation of complete edentulism is naturally related to temporomandibular joint (TMJ) since the proper functioning of complete denture depends on the normal movement of TMJ. This review briefly introduced the design of occlusion in complete denture, characteristic of different occlusal patterns, and key points in registration of maxillomandibular relationship and occlusal adjustment. This review emphasized the significance of complete denture restoration to the health of TMJ.
Topics: Humans; Temporomandibular Joint; Temporomandibular Joint Disorders; Dental Occlusion; Occlusal Adjustment; Denture, Complete; Tooth Loss
PubMed: 37818531
DOI: 10.3760/cma.j.cn112144-20230730-00048 -
Clinical Oral Investigations Apr 2024To evaluate the trueness of the digital maxillary occlusal records in comparison with the conventional records for the fabrication of complete-arch implant-supported... (Randomized Controlled Trial)
Randomized Controlled Trial
OBJECTIVES
To evaluate the trueness of the digital maxillary occlusal records in comparison with the conventional records for the fabrication of complete-arch implant-supported fixed prostheses.
MATERIALS AND METHODS
This randomized controlled clinical trial followed the recommendations of the CONSORT statement. Twenty participants who used a mandibular interim complete-arch fixed prosthesis and conventional complete maxillary dentures were included in the study. The participants were randomized into two types of maxillary occlusal records: conventional (COR) and digital (DOR) (TRIOS; Shape A/S). After fabricating the prostheses, the distribution and number of occlusal contact points, and the time taken to obtain the maxillary occlusal record and work model were evaluated. Descriptive analysis was used to evaluate the distribution of occlusal contact points. The Wilcoxon test was employed for assessing the number of occlusal contact points, while the Mann-Whitney U test was used for the time taken to obtain the working casts and the maxillary occlusal record and occlusal adjustment times (p < 0.05).
RESULTS
There was a similarity in the jaw relation recording methods regarding the distribution of occlusal contact points. There was no difference in the number of occlusal contact points between the anterior (p = 0.439) and posterior (p = 0.227) teeth. No relationship was observed between the distribution and number of occlusal contact points (COR, p = 0.288; DOR, p = 0.183). DOR required less occlusal and clinical adjustment time, on the other hand more laboratory and total workflow time than COR (p < 0.001).
CONCLUSION
The DOR may be an option for obtaining the functional space necessary for the assembly of teeth in complete-arch implant-supported fixed prostheses; however, it requires more working time.
CLINICAL RELEVANCE
The digital occlusal recording method can be used to assess the interocclusal space for the virtual tooth setup of a complete-arch implant-supported fixed prosthesis.
Topics: Humans; Dental Implants; Denture, Complete; Jaw Relation Record; Laboratories; Mandible
PubMed: 38630185
DOI: 10.1007/s00784-024-05639-w -
Journal of Esthetic and Restorative... Dec 2023To evaluate the volumetric changes on occlusal surface of computer-aided design and computer-aided manufacturing (CAD-CAM) occlusal devices fabricated following a fully...
OBJECTIVE
To evaluate the volumetric changes on occlusal surface of computer-aided design and computer-aided manufacturing (CAD-CAM) occlusal devices fabricated following a fully digital workflow after occlusal adjustment, compared to those fabricated with an analog workflow.
MATERIALS AND METHODS
Eight participants were included in this clinical pilot study, receiving two different occlusal devices fabricated with two different workflows, fully analog and fully digital. Every occlusal device was scanned before and after the occlusal adjustments to compare the volumetric changes using a reverse engineering software program. Moreover, three independent evaluators assessed a semi-quantitative and qualitative comparison using visual analog scale and dichotomous evaluation. The Shapiro-Wilk test was performed to validate normal distribution assumption, and a dependent t-Student test for paired variables was used to determine statistically significant differences (p-value < 0.05).
RESULTS
The root mean square value was extracted from the 3-Dimensional (3D) analysis of the occlusal devices. The average values of the root mean square were higher for the analogic technique (0.23 ± 0.10 mm) than the digital technique (0.14 ± 0.07 mm) but the differences were not statistically significant (paired t-Student test; p = 0.106) between the two fabrication techniques. The semiquantitative visual analog scale values between the impression for the digital (5.08 ± 2.4 cm) and analog (3.80 ± 3.3 cm) technique were significant (p < 0.001), and statistically significant differences values were assessed for evaluator 3 compared to the other evaluators (p < 0.05). However, the three evaluators agreed on the qualitative dichotomous evaluation in 62% of the cases, and at least two evaluators agreed in 100% of the evaluations.
CONCLUSIONS
Occlusal devices fabricated following a fully digital workflow resulted in fewer occlusal adjustments, as they could be a valid alternative to those fabricated following an analog workflow.
CLINICAL SIGNIFICANCE
Fabricated occlusal devices following a fully digital workflow could have some advantages over analog workflow such reduce occlusal adjustments at delivery appointment, which can result in reduced chair time and therefore increased comfort for the patient and clinician.
Topics: Humans; Occlusal Splints; Pilot Projects; Occlusal Adjustment; Computer-Aided Design; Workflow; Dental Prosthesis Design
PubMed: 37395327
DOI: 10.1111/jerd.13080 -
The Journal of Prosthetic Dentistry Aug 2023The volume of occlusal adjustment of digital occlusal devices designed with different digital occlusal articulators is unknown.
Comparative evaluation of the volume of occlusal adjustment of repositioning occlusal devices designed by using an average value digital articulator and the jaw movement analyzer.
STATEMENT OF PROBLEM
The volume of occlusal adjustment of digital occlusal devices designed with different digital occlusal articulators is unknown.
PURPOSE
The purpose of this clinical study was to evaluate and compare the clinical efficacy and volume of occlusal adjustment of digital occlusal devices designed by using an average value digital articulator and the jaw movement analyzer (JMA).
MATERIAL AND METHODS
Thirty participants were randomly divided into 2 groups, an Average value group and a JMA group, with 15 participants in each group. The centric relation position of the participants was determined by an experienced investigator with the aid of a leaf gauge. An intraoral scanner (TRIOS 3) was used to obtain digital scans of the maxillary and mandibular dentition and the maxillomandibular relationship record in the centric relation position. Personalized articulator parameters of participants in the JMA group were obtained by using a JMA (JMAnalyser). Different articulator parameters were used to fabricate an occlusal device in a denture design software program (exocad DentalCAD). The surface of the occlusal device was coated with a dental optical spray and then scanned by using a laboratory scanner (Kavo LS3). The process was repeated after the occlusal device was adjusted. The files of the 2 scans were imported into a reverse engineering software program, and the root mean square (RMS) values were obtained by best-fit alignment and 3-dimensional comparison. The Shapiro-Wilk normality test and homogeneity of variance test were performed, and t tests were used to evaluate differences in the RMS values between the groups (α=.05).
RESULTS
The experimental data were generally normally distributed (P>.05). No statistically significant difference was found between the RMS values of the Average and the JMA groups (P>.05).
CONCLUSIONS
No significant difference in the volume of occlusal adjustment was found when using occlusal devices made by using the digital average articulator or the JMA, suggesting that either method can be used to program articulators for the fabrication of occlusal devices.
PubMed: 37537106
DOI: 10.1016/j.prosdent.2023.06.018 -
The Journal of Prosthetic Dentistry Nov 2023Standard-diameter dental implants are not always applicable because of anatomic limitations of the residual ridge. Thus, mini-implants have been increasingly used and... (Meta-Analysis)
Meta-Analysis Review
STATEMENT OF PROBLEM
Standard-diameter dental implants are not always applicable because of anatomic limitations of the residual ridge. Thus, mini-implants have been increasingly used and offer an alternative. However, data regarding prosthetic complications, maintenance factors, and clinical outcomes are limited.
PURPOSE
The purpose of this systematic review and meta-analysis was to compare prosthetic complications and maintenance events and clinical outcomes in residual ridges rehabilitated with mandibular implant overdentures (IODs) by using standard implants or mini-implants.
MATERIAL AND METHODS
Nine electronic databases were searched. Quantitative analyses to measure the risk ratio (RR) and standardized mean difference (SMD) were applied. Those methods were used to assess prosthetic complications and maintenance events (abutment adjustments, replacement of retentive element, occlusal adjustment, and overdenture fracture) and clinical outcomes related to postoperative pain, probing depth (PD), plaque index (PI), marginal bone loss (MBL), and implant survival rate.
RESULTS
Altogether, 7 publications were selected. Mini-implants presented reduced abutment adjustments (RR 0.23 [0.07, 0.73], P=.01), replacement of retentive element (RR 0.41 [0.31, 0.54], P<.001), occlusal adjustment (RR 0.53 [0.31, 0.91], P=.02), and overdenture fracture (RR 0.46 [0.23, 0.94], P=.03) compared with standard implants. Additionally, mini-implants presented lower values for PI at 6 months (SMD -0.27 [-0.47, -0.08], P=.006) and 12 months (SMD -0.25 [-0.46, -0.05], P=.01). No additional tangible differences were noted.
CONCLUSIONS
Mini-implants might be an alternative choice based on the number of prosthetic complications and maintenance events. This was also confirmed by the comparable clinical data between standard implants and mini-implants.
Topics: Humans; Dental Implants; Denture, Overlay; Dental Prosthesis, Implant-Supported; Alveolar Bone Loss; Mandible
PubMed: 35120735
DOI: 10.1016/j.prosdent.2021.11.010 -
The International Journal of... Sep 2023To investigate the influence of occlusal interference using finite element analysis (FEA).
PURPOSE
To investigate the influence of occlusal interference using finite element analysis (FEA).
MATERIALS AND METHODS
The FEA model designed for this study centered on an all-ceramic, bilayered, fixed partial denture (FPD) retained on the maxillary first premolar and first molar, with the second premolar replaced by a pontic. The surrounding structures-such as the neighboring teeth, antagonists, and periodontium-were modeled. Four different loading cases were designed at occlusal interferences of 0, 8, 12, and 24 μm and were loaded by a simulated bite force of 300 N. Principal and von Mises stresses, as well as strain, were evaluated for all included structures.
RESULTS
For interferences of 12 and 24 μm, failure-relevant tensile stresses in the veneering layer were observed at the occlusal surfaces. Stress found in the zirconia FPD did not reach fatigue or flexural strength for any test load.
CONCLUSION
Peak tensile stress was observed in close proximity to occlusal contact points, increasing with increasing occlusal interference. The FEA results suggest that the majority of occlusal stress is absorbed by the deformation of the periodontal ligament. Framework failure caused by the simulated interferences was not expected. Surface defects may ultimately lead to failure due to fracture or chipping, especially in cases of weaker ceramics or veneering.
Topics: Occlusal Adjustment; Finite Element Analysis; Bite Force; Ceramics; Denture, Partial, Fixed
PubMed: 37699184
DOI: 10.11607/ijp.7178 -
Journal of Dentistry Jun 2024The objective of this study was to analyze the occlusal contact characteristics of the food-impacted teeth using a new digital technique.
OBJECTIVES
The objective of this study was to analyze the occlusal contact characteristics of the food-impacted teeth using a new digital technique.
METHODS
A 3D occlusal analysis method was developed for studying the occlusal contact characteristics of teeth affected by food impaction. In this self-controlled study, food-impacted molars from 20 participants constituted the experimental group. The corresponding healthy teeth on the opposite side served as the control group. Variables such as occlusal force (OF), occlusal contact area (OCA), and the number and distribution of occlusal contact points (OCN) in the mesio-distal directions were measured and compared between the two groups.
RESULTS
There was no statistical significant difference in the values of OF, OCA and OCN between the food-impacted molars and the healthy control molars (P > 0.05). However, paired T-tests indicated significant difference in the proportion of mesial OF, OCA, and OCN in the second molars of the experimental group (0.22, 0.28 and 0.28, respectively) and the control group (0.66, 0.63, and 0.63 respectively) (P < 0.001).
CONCLUSIONS
The abnormal distribution of occlusal contacts in the second molar, primarily characterized by excessive occlusal contact in the distal direction may contribute to the occurrence of food impaction.
CLINICAL SIGNIFICANCE
The present study identified variations in the distribution of occlusal contacts and occlusal component force in food-impacted teeth. These findings can assist dentists in making more targeted occlusal adjustments, or applying other treatment modalities, to effectively address food impaction.
PubMed: 38880468
DOI: 10.1016/j.jdent.2024.105133 -
Journal of Prosthodontics : Official... Mar 2024This is a clinical study to compare immediate and staged impression methods in a complete digital workflow for single-unit implants in the posterior area.
PURPOSE
This is a clinical study to compare immediate and staged impression methods in a complete digital workflow for single-unit implants in the posterior area.
MATERIALS AND METHODS
Sixty patients requiring single-unit implant crowns were enrolled. Forty patients were assigned to the test group, immediate digital impression after implant surgery with crown delivery 4 months later. The remaining 20 patients were assigned to the control group, staged digital impressions 4 months after implant surgery, and crown delivery 1 month later. Both workflows involved free-model CAD-CAM crown fabrications. The crowns were scanned before and after clinical adjustment using an intraoral scanner (TRIOS Color; 3Shape). Two 3D digital models were trimmed and superimposed to evaluate the dimensional changes using Geomagic Control software. Chairside times for the entire workflow were recorded. Kruskal-Wallis was performed to compare crown adjustments between two groups, while One-way ANOVA was used to compare chairside time durations between the test and control groups.
RESULTS
All crowns were delivered without refabrication. The average maximum occlusion adjustment of crowns was -353.2 ± 207.1 μm in the test group and -212.7 ± 150.5 μm in the control group (p = 0.02). The average area of occlusal adjustment, measured as an area of deviation larger than 100 μm, was 14.8 ± 15.3 and 8.4 ± 8.1 mm in the test and control groups, respectively (p = 0.056). There were no significant differences in the mesial and distal contact adjustment amounts, or the maximum deviations of the proximal area, between the two groups. The mean chair-side time was 50.25 ± 13.48 and 51.20 ± 5.34 min in the test and control groups, respectively (p = 0.763).
CONCLUSIONS
The immediate impression method in the digital workflow for single-unit implants required more occlusal adjustments of crowns but showed similar chairside times compared to the staged impression method.
PubMed: 38526488
DOI: 10.1111/jopr.13851