-
BMC Oral Health Aug 2023The purpose of this article is to discuss the effective management of mandibular fractures in pediatric patients during the growing phase of the mandible using splint...
PURPOSE
The purpose of this article is to discuss the effective management of mandibular fractures in pediatric patients during the growing phase of the mandible using splint fiber and ligature wire.
METHODS
A retrospective study examined pediatric patients with mandibular fractures who were treated using the splint (Quartz) fiber and ligature wire technique at the Stomatology Hospital of Xi'an Jiaotong University from August 2021 to January 2023. Data on gender, age, location or site of the fracture, and development of tooth stage were collected from the patient's medical records. Descriptive statistics were used to analyze the data and evaluate the effectiveness of the splint (Quartz) fiber technique for treating mandibular fractures in pediatric patients.
RESULTS
Out of 256 subjects, 6 pediatric patients with mandibular fractures were selected, resulting in an incidence rate of 2.34% with an equal sex ratio. Mental or symphysis fracture was the most common site for fracture in children, accounting for 100% of cases. Right mandibular angle fracture was observed in 16.7% of patients, while 50% of the group (3 individuals) suffered from left condylar fracture and 16.7% had a bilateral condylar fracture. Treatment with Quartz splint fiber and circumdental arch wiring using ligature wire was successful with no observed post-treatment complications or malocclusion. The splint fiber was worn for 30 days and the circumdental arch wiring was for the same. Healing of bone fracture yields good results after 12 weeks. Follow-up care is crucial to monitor for complications, in this study, no post-treatment complications were observed.
CONCLUSION
The treatment of pediatric mandibular fractures is complex and requires careful consideration of various factors. Conservative management should be the first choice, with open reduction and internal fixation reserved for specific cases. The use of quartz splint fiber and ligature wire is an effective treatment option for stabilizing the mandible and providing occlusal stability in growing children. A fiber splint along with ligature wire can also be used as an alternative treatment to avoid any adverse effects on the growth and development of the mandible and permanent teeth. A multidisciplinary approach is essential to achieving the best outcomes for pediatric patients with mandibular fractures.
Topics: Humans; Child; Mandibular Fractures; Conservative Treatment; Quartz; Retrospective Studies; Splints
PubMed: 37641075
DOI: 10.1186/s12903-023-03309-z -
Journal of Indian Prosthodontic Society Jul 2024Temporomandibular disorders (TMD) comprise ailments involving the jaw joint (temporomandibular joint) and its associated anatomical structures. The complexity involved... (Review)
Review
AIM
Temporomandibular disorders (TMD) comprise ailments involving the jaw joint (temporomandibular joint) and its associated anatomical structures. The complexity involved in TMD is primarily due to its broad spectrum of conditions, clinical signs and symptoms variability, and multifactorial etiology. Considering the above, the present study was performed to help understand the prevailing knowledge and awareness of TMD among Indian dentists in the context of the new specialty "orofacial pain".
SETTINGS AND DESIGN
Questinnaire study and review.
MATERIALS AND METHODS
The questionnaire was distributed using a web-based portal nationwide among Indian dentists. Dentists were invited to participate, clearly stating that the intent and purpose of the questionnaire was to record the existing knowledge and awareness concerning temporomandibular disorders among Indian dentists. The questionnaire was segregated into three sections: pathogenesis, diagnosis, and management of TMDs. The questions were recorded using a Likert three-point scale (1=agree; 2=disagree; 3=not aware). 310 dentists participated in the survey, among which 105 were general dentists (BDS [Bachelor of Dental Surgery] graduates), and 205 were dentists with specialist training (MDS [Masters of Dental Surgery] graduates).
STATISTICAL ANALYSIS USED
The results obtained from the study participants was used to calculate the percentage and frequency, following which tabulations were made based on graduate type and clinical experience. The values obtained from all three sections were recorded, and the responses were analysed using Pearson's Chi-Square test with statistical significance kept at P < 0.05.
RESULTS
Results of the study disclosed that only 58.1% of general dentists and 46.8% of specialists were confident in handling temporomandibular disorder patients. Splint therapy was the preferred treatment modality for general dentists, whereas dentists with specialist training preferred occlusal rehabilitation.
CONCLUSION
The results of the current survey indicate that Indian dentists lack sufficient training in dental schools on all three sections and face difficulty diagnosing and treating TMDs.
Topics: Humans; India; Surveys and Questionnaires; Temporomandibular Joint Disorders; Dentists; Health Knowledge, Attitudes, Practice; Male; Female; Practice Patterns, Dentists'
PubMed: 38946513
DOI: 10.4103/jips.jips_573_23 -
BMJ Open Aug 2023Just under half of patients with obstructive sleep apnoea (OSA) also have gastro-oesophageal reflux disease (GORD). These conditions appear to be inter-related and...
Single-centre, single-blinded, randomised, parallel group, feasibility study protocol investigating if mandibular advancement device treatment for obstructive sleep apnoea can reduce nocturnal gastro-oesophageal reflux (MAD-Reflux trial).
INTRODUCTION
Just under half of patients with obstructive sleep apnoea (OSA) also have gastro-oesophageal reflux disease (GORD). These conditions appear to be inter-related and continual positive airway pressure (CPAP) therapy, the gold standard treatment for OSA to prevent airway collapse, has been shown to reduce GORD. As the impact of mandibular advancement devices, a second-line therapy for OSA, on GORD has yet to be investigated, a feasibility study is needed prior to a definitive trial.
METHODS
This will be a single-centre, single-blinded, tertiary-care based, interdisciplinary, parallel randomised controlled study. Potential OSA participants presenting to the sleep department will be pre-screened for GORD using validated questionnaires, consented and invited to receive simultaneous home sleep and oesophageal pH monitoring. Those with confirmed OSA and GORD (n=44) will be randomly allocated to receive either CPAP (n=22) or MAD therapy (n=22). Following successful titration and 3 weeks customisation period, participants will repeat the simultaneous sleep and oesophageal pH monitoring while wearing the device. The number of patients screened for recruitment, drop-out rates, patient feedback of the study protocol, costs of interventions and clinical information to inform a definitive study design will be investigated.
ETHICS AND DISSEMINATION
Health Research Authority approval has been obtained from the Nottingham 2 Research Ethics Committee, ref:22/EM/0157 and the trial has been registered on ISRCTN (https://doi.org/10.1186/ISRCTN16013232). Definitive findings about the feasibility of doing 24 hour pH oesophageal monitoring while doing a home sleep study will be disseminated via clinical and research networks facilitating valuable insights into the simultaneous management of both conditions.
TRIAL REGISTRATION NUMBER
ISRCTN Reg No: 16013232.
Topics: Humans; Feasibility Studies; Occlusal Splints; Gastroesophageal Reflux; Sleep Apnea, Obstructive; Sleep; Randomized Controlled Trials as Topic
PubMed: 37620257
DOI: 10.1136/bmjopen-2023-076661 -
Journal of Oral Rehabilitation Oct 2023Anterior repositioning splint (ARS) is used to treat temporomandibular joint (TMJ) disc displacement with reduction (DDwR). However, high recurrence rate remains a...
BACKGROUND
Anterior repositioning splint (ARS) is used to treat temporomandibular joint (TMJ) disc displacement with reduction (DDwR). However, high recurrence rate remains a problem especially in patients with unstable occlusions.
OBJECTIVE
This study optimised standard ARS therapy and proposed a step-back ARS retraction (SAR) method in adult patients with DDwR.
METHODS
Dental examinations and magnetic resonance imaging of TMJ were obtained before treatment (T0), 1 to 3 months (T1), 3 to 6 months (T2) and 6 to 12 months (T3) during treatment in 48 adults (average age 27.1 ± 5.7 years). After 3 months of basic ARS wearing, personalised treatment for patients with normal disc-condyle relationship was prescribed depending on bilaminar zone adaptations and severity of molar openbite. SAR which required sequential ARS wearing was designed for patients with deep overbite/overjet until retrodiscal tissue adaptations and stable occlusions were achieved.
RESULTS
The maximum interincisal opening was increased from 44.3 ± 6.9 to 45.3 ± 6.3 mm (p < .01), and joint pain was alleviated after ARS treatment. The overall success rate of ARS wearing was 92.1% (58/63) featured by a recaptured disc. Fifteen patients who underwent SAR therapy all showed bilaminar zone adaptations in the end, and one patient had positive condylar bone remodelling.
CONCLUSIONS
ARS treatment could improve mouth opening and joint symptoms in adult DDwR patients. SAR method was suitable for treating DDwR patients with deep overbite and overjet and improved retrodiscal tissue adaptations and condylar bone remodelling.
Topics: Humans; Adult; Young Adult; Splints; Temporomandibular Joint Disc; Overbite; Joint Dislocations; Temporomandibular Joint Disorders
PubMed: 37133450
DOI: 10.1111/joor.13485 -
Journal of Esthetic and Restorative... Oct 2023This clinical trial aims to compare the accuracy of interocclusal registration in centric relation taken with polyvinyl siloxane and intraoral scanner (IOS) with the...
OBJECTIVE
This clinical trial aims to compare the accuracy of interocclusal registration in centric relation taken with polyvinyl siloxane and intraoral scanner (IOS) with the fabrication of occlusal devices.
METHODS
Thirty-one participants were included in the trial registered at ClinicalTrials.gov (NCT05317182) receiving two different occlusal devices from two different workflows. One workflow was performed using polyvinyl siloxane impression material and the other with IOS. Every splint was scanned before and after the occlusal adjustments to compare the volumetric changes using the Root Mean Square deviation (RMS). Furthermore, three evaluators assessed the 3D comparison using color maps in a Visual Analog Scale (VAS).
RESULTS
The average values of RMS were higher for the analog approach (0.01 ± 0.067) than the digital approach (0.065 ± 0.035). However, the differences were not statistically significant (p < 0.063) between the two impression techniques. For the semiquantitative analysis performed by blinded evaluators, differences in VAS values between the impression for the digital (2.08 ± 2.4) and analog (3.80 ± 3.3) technique were statistically significant. The three evaluators agreed in more than 90% of the qualitative dichotomous evaluation.
CONCLUSION
Digital impressions did not show inferior accuracy compared to conventional impressions when assessed using quantitative measurements.
CLINICAL SIGNIFICANCE
This clinical trial provided evidence on registering interocclusal relationship at increased vertical dimension with fully digital workflow for complete arch prosthesis.
Topics: Humans; Computer-Aided Design; Occlusal Splints; Dental Impression Technique; Polyvinyls
PubMed: 36942721
DOI: 10.1111/jerd.13039 -
Journal of Movement Disorders Apr 2024
PubMed: 38219737
DOI: 10.14802/jmd.23249 -
European Journal of Oral Sciences May 2024This study aimed to investigate the bisphenol A (BPA) release from four CAD/CAM splint materials: three polycarbonate-based (DD BioSplint C, Splint Plus Biostar, Temp...
This study aimed to investigate the bisphenol A (BPA) release from four CAD/CAM splint materials: three polycarbonate-based (DD BioSplint C, Splint Plus Biostar, Temp Premium Flexible) and one polymethylmethacrylate-based (Temp Basic) material. From each material, ten cylindrical samples (n = 40) were immersed in high-performance liquid chromatography (HPLC) grade water following ISO 10993-12 and incubated for 24 h in an incubation shaker at 37°C and 112 rpm. Following BPA derivatization, analysis was performed by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). After 24 h of incubation, all investigated materials released significant amounts of BPA compared to water blanks. The material-dependent elution increased in the following order: DD BioSplint C < Splint Plus Biostar < Temp Basic < Temp Premium Flexible. Subtracting extraneous BPA, the concentrations ranged between 2.27 ng/mL and 12.65 ng/mL. After extrapolating the concentrations in relation to the average surface area of occlusal splints, the amount of BPA per mL exceeded the Tolerable Daily Intake (TDI) set by the European Union for a person weighing 70 kg by 1.32-6.16 times. Contrary to the release from previously investigated materials, BPA elution from CAD/CAM splint materials was highly elevated. Considering the increasing adaptation of CAD/CAM techniques, elution from them may represent a relevant BPA source in daily dental practice.
PubMed: 38778467
DOI: 10.1111/eos.12993 -
Clinical Oral Investigations Jun 2024The aim of this review was to analyze mechanical and biological properties of resin materials used with subtractive or additive techniques for oral appliances... (Meta-Analysis)
Meta-Analysis Comparative Study Review
Mechanical and biological properties of polymer materials for oral appliances produced with additive 3D printing and subtractive CAD-CAM techniques compared to conventional methods: a systematic review and meta-analysis.
OBJECTIVES
The aim of this review was to analyze mechanical and biological properties of resin materials used with subtractive or additive techniques for oral appliances fabrication and compare them to those conventionally manufactured.
MATERIALS AND METHODS
The protocol was registered online at Open Science Framework (OSF) registries ( https://osf.io/h5es3 ) and the study was based on the preferred reporting items for systematic review and meta-analysis protocols (PRISMA-P). An electronic search was conducted on MEDLINE (via PubMed), Scopus, and Web of Science from 1 February 2022 to 1 May 2022.
INCLUSION CRITERIA
in vitro and in vivo studies published in the last 10 years, with CAD-CAM or 3D printed resins for occlusal splints. Data considered homogenous were subjected to meta-analysis (95% confidence interval [CI]; α = 0.05) with Stata17 statistical software. Since all variables were continuous, the Hedge g measure was calculated. A fixed-effects model was used for I = 0%, while statistical analysis was conducted using a random-effects model with I > 0%.
RESULTS
13 studies were included after full-text reading. The mechanical properties most studied were wear, flexural strength, surface hardness and surface roughness, while only 1 study investigated biological properties, performing the XTT viability assay. For the meta-analysis, only surface roughness, volume loss, and flexural strength were selected. Considering surface roughness, the subtractive specimen had a lower average value compared to traditional ones (Hedge's g with 95% CI = -1.25[ -1.84, - 0.66]). No significant difference was detected in terms of volume loss (P > 0.05) between the groups (Hedge's g with 95% CI = -0.01 [-2.71, - 2.68]). While flexural strength was higher in the control group (Hedge's g with 95% CI = 2.32 [0.10-4.53]).
CONCLUSION
3D printed materials showed properties comparable to conventional resins, while milled splint materials have not shown better mechanical performance compared with conventional heat-cured acrylic resin. Polyetheretherketone (PEEK) have great potential and needs to be further investigated. Biological tests on oral cell populations are needed to confirm the long-term biocompatibility of these materials.
CLINICAL RELEVANCE
The use of "mixed splints" combining different materials needs to be improved and evaluated in future research to take full advantage of different characteristics and properties.
Topics: Computer-Aided Design; Printing, Three-Dimensional; Humans; Materials Testing; Polymers; Dental Materials; Surface Properties
PubMed: 38916682
DOI: 10.1007/s00784-024-05772-6 -
Journal of Personalized Medicine Jul 2023The purpose of this study is to report clinical and instrumental changes after RA.DI.CA splint therapy for temporomandibular joint disc displacement without reduction.
BACKGROUND
The purpose of this study is to report clinical and instrumental changes after RA.DI.CA splint therapy for temporomandibular joint disc displacement without reduction.
METHODS
Subjects affected by disc dislocation without reduction were recruited between July 2020 and May 2022 based on inclusion and exclusion criteria and treated with RA.DI.CA. splints over a period of 6 months. Clinical data were collected at each phase of the study (T0, T1, T2). Magnetic resonance imaging and electrognathography data were recorded at the beginning (T0) and at the end (T2) of the study. ANOVA with post-hoc contrasts was performed to assess differences in outcome measures over time. The Wilcoxon test was used to evaluate changes in disc-condyle angle between before- and after-treatment MRI. A two-tailed value of < 0.05 was regarded as significant.
METHODS
Ten patients completed the study. There were statistically significant differences over time for arthralgia, headache, neck pain, and mouth opening. Disc recapture and an improved quality of mandibular movement were recorded in 70% of subjects. The clinical and instrumental improvements are probably due to the orthopedic action of RA.DI.CA splint treatment, which allows for a greater degree of joint mobilization.
CONCLUSIONS
The purpose of this therapy is to recover the disc position if possible and achieve an adequate joint functional adaptation that avoids the progression of the structural damage and the recurrence of symptoms.
PubMed: 37511708
DOI: 10.3390/jpm13071095 -
Journal of Oral Rehabilitation May 2024Myogenic temporomandibular disorders (M-TMD) commonly involve occlusal splint (OS) therapy and musculoskeletal physiotherapy (MPT).
BACKGROUND
Myogenic temporomandibular disorders (M-TMD) commonly involve occlusal splint (OS) therapy and musculoskeletal physiotherapy (MPT).
OBJECTIVES
To compare the effects of combining OS with MPT and education (EG) against OS and education (CG), in chronic M-TMD patients.
METHODS
In this double-blind randomised controlled trial, 62 participants were assigned to either EG or CG. The primary outcomes, pain levels at rest (VAS rest), maximum oral opening (VAS open) and during chewing (VAS chew), were measured by Visual Analogue Scale (VAS) in cm. The secondary outcome was the range of motion (ROM) for maximum oral opening. Both interventions lasted 3 months, with outcomes assessed at baseline (T0), post-treatment (T1) and 3 months post-treatment (T2).
RESULTS
Intention-to-treat analysis revealed significant improvements favouring EG (VAS rest = -1.50 cm [CI: -2.67, -0.32], p = .04; VAS open = -2.00 cm [CI: -3.23, -0.75], p < .01; VAS chew = -1.71 cm [CI: -2.90, -0.52], p = .01; ROM = 4.61 [CI: 0.93, 8.30], p = .04). Additionally, VAS measures were influenced by follow-up times (VAS rest = -0.73 cm [CI: -1.30, -0.17], p = 0.03; VAS open = -0.97 cm [CI: -1.57, -0.37], p < .01; VAS chew = -1.15 cm [CI: -1.73, -0.58], p < .01). At T1, EG demonstrated higher number of responders compared to CG for VAS open (χ(1) = 4.39, p = .04) and VAS chew (χ(1) = 11.58, p < .01).
CONCLUSION
Adding MPT to education and OS yields better outcomes in terms of pain reduction and ROM improvement, in chronic M-TMD.
TRIAL REGISTRATION NUMBER
NCT03726060.
PubMed: 38757854
DOI: 10.1111/joor.13729