-
Cancer Epidemiology, Biomarkers &... Oct 2023Acidic urine pH is associated with rapid hydrolysis of N-glucuronide conjugates of aromatic amines into metabolites that may undergo metabolism in the bladder lumen to...
BACKGROUND
Acidic urine pH is associated with rapid hydrolysis of N-glucuronide conjugates of aromatic amines into metabolites that may undergo metabolism in the bladder lumen to form mutagenic DNA adducts. We previously reported that consistently acidic urine was associated with increased bladder cancer risk in a hospital-based case-control study in Spain. Here, we conducted a separate study in northern New England to replicate these findings.
METHODS
In a large, population-based case-control study conducted in Maine, New Hampshire, and Vermont, we examined bladder cancer risk in relation to consistent urine pH, measured twice daily by participants over 4 consecutive days using dipsticks. In parallel, we collected spot urine samples and conducted laboratory measurements of urinary acidity using a pH meter. Unconditional logistic regression was used to estimate associations, adjusting for age, gender, race, Hispanic status, and state. Analyses were further stratified by smoking status.
RESULTS
Among 616 urothelial carcinoma cases and 897 controls, urine pH consistently ≤ 6.0 was associated with increased bladder cancer risk (OR = 1.27; 95% confidence interval, 1.02-1.57), with the effect limited to ever-smokers. These findings were supported by analyses of a spot urine, with statistically significant exposure-response relationships for bladder cancer risk overall (Ptrend = 5.1×10-3) and among ever-smokers (Ptrend = 1.2×10-3).
CONCLUSIONS
Consistent with a previous study in Spain, our findings suggest that acidic urine pH is associated with increased bladder cancer risk.
IMPACT
Our findings align with experimental results showing that acidic urine pH, which is partly modifiable by lifestyle factors, is linked to hydrolysis of acid-labile conjugates of carcinogenic aromatic amines.
Topics: Humans; Urinary Bladder Neoplasms; Carcinoma, Transitional Cell; Case-Control Studies; New England; Amines; Hydrogen-Ion Concentration; Risk Factors
PubMed: 37351876
DOI: 10.1158/1055-9965.EPI-22-0801 -
Multiple Sclerosis and Related Disorders Jul 2024Walking speed is considered a vital sign of health and better functional outcomes. It is important to assess walking speed both for disease monitoring and before...
BACKGROUND
Walking speed is considered a vital sign of health and better functional outcomes. It is important to assess walking speed both for disease monitoring and before starting rehabilitation. The aim of this study was to examine the reliability, validity, minimal detectable change, and the ideal cutoff time for differentiating patients with multiple sclerosis (PwMS) who fall from PwMS who do not.
METHODS
This study included 43 PwMS (26 female and 17 male) and 36 healthy controls (23 female and 13 male). The 4-meter walk test (4-MWT) was conducted with the 10-meter walk test (10-MWT), timed up and go (TUG) test, dynamic gait index (DGI), timed 25-foot walk (T25-FW), multiple sclerosis walking scale-12 (MSWS-12), and the expanded disability status scale (EDSS).
RESULTS
Excellent test-retest reliability (ICC = 0.971) was found for the 4-MWT. The SEM value was 0.38 and MDC value was 1.05. The correlations with 4-MWT, 10-MWT, TUG, DGI, T25-FW, MSWS-12, and EDSS were found to be statistically significant (p < 0.001). PwMS had longer 4-MWT times than healthy controls, and PwMS fallers had longer 4-MWT times than non-fallers with PwMS (r between 0.668 and -0.858; p < 0.05 for all). In order to distinguish fallers from non-fallers with PwMS, a 4-MWT cutoff time of 4.14 s was shown to be optimal.
CONCLUSION
The 4-MWT was found to be valid and reliable for PwMS. It is concluded that the 4-MWT is a feasible assessment method for clinical and methodological studies of PwMS with mild to moderate disability.
Topics: Humans; Female; Male; Reproducibility of Results; Multiple Sclerosis; Adult; Walk Test; Middle Aged; Disability Evaluation
PubMed: 38759422
DOI: 10.1016/j.msard.2024.105679 -
Frontiers in Microbiology 2023Biochar is a carbonaceous by-product of lignocellulosic biomass developed by various thermochemical processes. Biochar can be transformed into "nano-biochar" by size... (Review)
Review
Biochar is a carbonaceous by-product of lignocellulosic biomass developed by various thermochemical processes. Biochar can be transformed into "nano-biochar" by size reduction to nano-meters level. Nano-biochar presents remarkable physico-chemical behavior in comparison to macro-biochar including; higher stability, unique nanostructure, higher catalytic ability, larger specific surface area, higher porosity, improved surface functionality, and surface active sites. Nano-biochar efficiently regulates the transport and absorption of vital micro-and macro-nutrients, in addition to toxic contaminants (heavy metals, pesticides, antibiotics). However an extensive understanding of the recent nano-biochar studies is essential for large scale implementations, including development, physico-chemical properties and targeted use. Nano-biochar toxicity on different organisms and its in-direct effect on humans is an important issue of concern and needs to be extensively evaluated for large scale applications. This review provides a detailed insight on nanobiochar research for (1) development methodologies, (2) compositions and properties, (3) characterization methods, (4) potentiality as emerging sorbent, photocatalyst, enzyme carrier for environmental application, and (5) environmental concerns.
PubMed: 37547682
DOI: 10.3389/fmicb.2023.1214870 -
International Journal of Food Science 2023Major losses are recorded every year in the plantain production sector in Côte d'Ivoire. These losses are mainly due to poor harvesting, transport, and storage...
Major losses are recorded every year in the plantain production sector in Côte d'Ivoire. These losses are mainly due to poor harvesting, transport, and storage conditions. Local processing of this food crop into other products could help limit postharvest losses. The aim of this study was to evaluate some microbiological and physicochemical parameters during the fermentation of plantain must for the production of an alcoholic beverage. Physicochemical parameters such as pH, titratable acidity, and reducing sugars were measured using a pH meter by titration and the Bernfeld method, respectively. Refractometric dry extract and alcohol content were measured using a refractometer. Loads of mesophilic aerobic germs, total coliforms, streptococci, and yeasts were determined by standard microbiological methods. Values for refractometric dry extract (10°B-4.5°B), reducing sugars (8.25-0 mg/mL), and pH (4.37-3.36) decrease during fermentation. The highest alcohol content (11%) is obtained after four days of fermentation of plantain must. In contrast to total coliforms (5.27-3.61 log cfu/mL), loads of mesophilic aerobic germs (4.84-9.8 log cfu/mL) increase during fermentation. Yeast and streptococci loads reach their peaks at 7.81 log cfu/mL and 8.15 log cfu/mL, respectively, after six (6) days of fermentation before dropping off. Plantain must could be used to produce distilled alcoholic beverages.
PubMed: 37736026
DOI: 10.1155/2023/8611252 -
TheScientificWorldJournal 2023This study aimed to assess the effect of addition of fluorohydroxyapatite (FHI) on biological and physical properties of mineral trioxide aggregate (MTA) Angelus.
OBJECTIVES
This study aimed to assess the effect of addition of fluorohydroxyapatite (FHI) on biological and physical properties of mineral trioxide aggregate (MTA) Angelus.
MATERIALS AND METHODS
In this in vitro, experimental study, nano-FHI powder was first synthesized, and the morphology and chemical structure of particles were evaluated by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Three groups were evaluated in this study: MTA Angelus, MTA modified with 10% FHA, and MTA modified with 15% FHA. After mixing, the materials were applied to ring molds (10 mm diameter, 1 mm height), and the setting time of the three groups was evaluated according to ISO6876 and ASTMC266-03 with a Gillmore needle. The pH was measured using a pH meter at 24 and 48 hours and 7 days after mixing. The cytotoxicity of the materials was assessed in freshly mixed form and after 1 and 7 days using the methyl thiazolyl tetrazolium (MTT) assay according to ISO10993-5. Data were analyzed by one-way and repeated measures ANOVA and Tukey's test (alpha = 0.05).
RESULTS
The addition of FHA to MTA significantly decreased the initial setting time ( < 0.05) and had no significant effect on cell viability (compared with pure MTA Angelus) at 1 and 7 days. However, modified MTA groups in freshly mixed form showed significantly lower cell viability ( < 0.05). The pH remained alkaline at all time points.
CONCLUSION
Addition of 15% FHA to MTA Angelus decreased its setting time with no adverse effect on cell viability (except for fresh form) or pH.
Topics: Calcium Compounds; Aluminum Compounds; Oxides; Silicates; Drug Combinations; Materials Testing; Root Canal Filling Materials; Bismuth; Hydroxyapatites
PubMed: 37964892
DOI: 10.1155/2023/7532898 -
BMC Oral Health Sep 2023This present study assesses changes in the pH as well as the metal ions that fake braces release into artificial saliva (AS) using a pH meter and inductively coupled...
BACKGROUND
This present study assesses changes in the pH as well as the metal ions that fake braces release into artificial saliva (AS) using a pH meter and inductively coupled plasma atomic emission spectroscopy (ICP-AES), respectively.
METHODS
Three sets of fake archwires (AWs) and brackets (Bs) as well as a set of controls were immersed in AS and placed in an incubator shaker at 50 rpm and 37°C. At Days 0, 1, 7, 14, 21, and 28, the pH of the AS medium was measured and 3.0 ml of AS was collected and stored at -20°C for elemental analysis.
RESULTS
Significant changes in pH were observed on Days 0, 1, 7, 14, 21, and 28 in the AS of the AW group. However, these changes were only observed in the B group on Days 0 and 7. The fake samples released a large quantity of sodium (Na), potassium (K), and calcium (Ca) ions, at concentrations exceeding 100 mg/L, post-28 days of immersion. The control and fake braces samples released other ions; such as lithium (Li), magnesium (Mg), barium (Ba), chromium (Cr), copper (Cu), lead (Pb), and aluminium (Al); at concentrations that did not exceed 10 mg/L.
CONCLUSIONS
The pH of the AS of all the samples increased post-incubation. Only 10 ions; namely, Na, Li, K, Mg, Ca, Ba, Cr, Cu, Pb, and Al; were detected in the AS.
Topics: Humans; Orthodontic Brackets; Saliva, Artificial; Lead; Aluminum; Chromium; Ions; Hydrogen-Ion Concentration
PubMed: 37717000
DOI: 10.1186/s12903-023-03339-7 -
Journal of Pharmaceutical Sciences Aug 2023Bacteriostatic water for injection (bWFI) is a common diluent for parenteral pharmaceutical products. bWFI is sterile water for injection containing one or more suitable...
Bacteriostatic water for injection (bWFI) is a common diluent for parenteral pharmaceutical products. bWFI is sterile water for injection containing one or more suitable antimicrobial agents to suppress the growth of microbial contaminants. United States Pharmacopeia (USP) monograph describes bWFI with pH ranging from pH 4.5 to 7.0. Lacking buffering reagents, bWFI has very low ionic strength, no buffering capacity and is prone to sample contamination. These characteristics pose a challenge for accurate bWFI pH measurements which are characterized by long response times and noisy signals, resulting in inconsistent results. The challenging nature of bWFI pH measurement, however, is not fully recognized as pH is generally considered a routine analytical technique. Even with the addition of KCl to increase ionic strength as recommended by the USP bWFI monograph, variability in pH results is still observed without careful consideration of other critical measurement factors. To bring awareness to the challenges associated with bWFI pH measurement, we present a comprehensive characterization of the bWFI pH measurement process that includes an evaluation of probe suitability, measurement stabilization time, and pH meter settings. While these factors may be non-critical and sometimes overlooked when developing pH methods for buffered samples, they can have a significant impact on bWFI pH measurement. We present recommendations that can help reliable bWFI pH measurements for routine execution in a controlled environment. These recommendations also apply to other pharmaceutical solutions or water samples with low ionic strength.
Topics: Water; Drug Contamination; Hydrogen-Ion Concentration
PubMed: 36870668
DOI: 10.1016/j.xphs.2023.02.023 -
West African Journal of Medicine Oct 2023Caries is controlled by several factors including exposure to diets rich in carbohydrates, tooth susceptibility, and the presence of some oral flora bacteria such as...
BACKGROUND
Caries is controlled by several factors including exposure to diets rich in carbohydrates, tooth susceptibility, and the presence of some oral flora bacteria such as Streptococcus mutans (S. mutans) and Lactobacilli sp. Tooth demineralisation occurs when the pH in the oral cavity is lower than the critical pH of 5.5 which occurs because of the production of acid by the acidogenic bacteria in the oral flora when they break down sugars (substrate) for energy.
OBJECTIVE
The objective of this study was to determine the salivary Streptococcus mutans and Lactobacillus counts and their association with resting pH of saliva and dental caries in pre-school children in Lagos.
MATERIALSAND METHODS
Fifty preschoolers with and without caries were recruited from the dental clinic and staff primary school in Lagos University Teaching Hospital, Idi-araba respectively. Saliva was collected in Thioglycollate media. The resting pH of the saliva was measured immediately in the clinic with a pH meter (Jenway pH meter, PHS 25). In the laboratory, the samples were streaked on Mitis salivarius bacitracin agar (MSB) and Rogosa agar for S. mutans and Lactobacillus respectively and incubated anaerobically for 48 hours at 37°C. Biochemical tests and morphological characteristics of colonies were used to identify S. mutans and Lactobacillus.
RESULTS
The children were aged between 45 to 71 months with a mean age of 56.66 7.17 months. The mean age of the caries-free group was 55.48 7.57 months and that of caries active group was 57.84 6.76 months. The caries-active subjects recorded significantly higher bacterial counts of S. mutans and Lactobacillus compared to the cariesfree subjects. Streptococcus mutans and Lactobacillus showed a negative and highly significant correlation with resting pH (r = - 0.38 and r = - 0.32 value respectively).
CONCLUSION
The resting pH of saliva in both groups was within normal values. Streptococcus mutans and Lactobacillus counts were significantly inversely correlated to the resting pH value of saliva. Streptococcus mutans and Lactobacillus counts were significantly higher in the caries active group.
CONTEXTE
La carie est contrôlée par plusieurs facteurs dont l'exposition à des régimes riches en glucides, la sensibilité des dents et la présence de certaines bactéries de la flore buccale telles que Streptococcus mutans (S. mutans) et Lactobacilli sp.. La déminéralisation des dents se produit lorsque le pH dans la cavité buccale est inférieur au pH critique de 5,5 qui se produit à la suite de la production d'acide par les bactéries acidurogènes dans la flore buccale lorsqu'elles décomposent les sucres (substrat) pour l'énergie.
BUT ET OBJECTIF
L'objectif de cette étude était de déterminer le nombre de Streptococcus mutans et de Lactobacillus et leur association avec le pH au repos de la salive et des caries dentaires chez les enfants d'âge préscolaire à Lagos.
MATÉRIEL ET MÉTHODES
Cinquante enfants d'âge préscolaire avec et sans caries ont été recrutés respectivement à la clinique dentaire et à l'école primaire du personnel de l'hôpital universitaire de Lagos, Idiaraba. La salive a été recueillie dans un milieu au thioglycolate. Le pH au repos de la salive a été mesuré immédiatement en clinique avec un pHmètre (Jenway pH meter, PHS 25).Au laboratoire, les échantillons ont été striés sur gélose bacitracine Mitis salivarius (MSB) et gélose Rogosa pour S. mutans et Lactobacillus respectivement et incubés en anaérobiose pendant 48 heures à 37°C. Des tests biochimiques et des caractéristiques morphologiques des colonies ont été utilisés pour identifier S. mutans et Lactobacillus.
RÉSULTATS
Les enfants étaient âgés de 45 à 71 mois avec un âge moyen de 56,66 ± 7,17 mois. L'âge moyen du groupe sans carie était de 55,48 ± 7,57 mois et celui du groupe avec carie active était de 57,84 ± 6,76 mois. Les sujets actifs carieux ont enregistré un nombre de bactéries significativement plus élevé de S. mutans et Lactobacillus par rapport aux sujets sans caries. Streptococcus mutans et Lactobacillus ont montré une corrélation négative et hautement significative avec la valeur du pH au repos (r = - 0.38 et r = - 0.32 respectivement) .
CONCLUSION
Le pH au repos de la salive dans les deux groupes était dans les valeurs normales. Les numérations de Streptococcus mutans et de Lactobacillus étaient significativement inversement corrélées à la valeur du pH de la salive au repos. Les numérations de Streptococcus mutans et de Lactobacillus étaient significativement plus élevées dans le groupe actif carieux.
MOTS-CLÉS
Numération bactérienne, Streptococcus mutans, Lactobacillus, pH delasalive,Enfants d'âgepréscolaire.
Topics: Humans; Child, Preschool; Child; Streptococcus mutans; Saliva; Agar; Dental Caries; Nigeria; Cyclophosphamide; Doxorubicin
PubMed: 37906512
DOI: No ID Found -
Brazilian Dental Journal 2023This study compared the pH and calcium ion release of calcium silicate- (Bio-C Temp) and calcium hydroxide-based (Ultracal XS) medications. Intracanal remnants of both...
This study compared the pH and calcium ion release of calcium silicate- (Bio-C Temp) and calcium hydroxide-based (Ultracal XS) medications. Intracanal remnants of both medications were also evaluated using SEM-EDS after the removal protocol. Thirty-five bovine teeth were prepared. Fifteen were filled with Bio-C Temp and 15 with Ultracal XS. Five remained without intracanal medication (control group). Five samples from each experimental time (i.e.. 24, 72, and 168 hours) were used to measure pH and calcium ions release using a digital pH meter and microplate reader, respectively. Afterward, the peaks of the chemical elements composing both medications were analyzed in SEM-EDS. One-way ANOVA and Tukey's post hoc test analyzed the pH and calcium ion release data. Student's t-test compared the medications in each experimental time. SEM-EDS described the percentage of chemical elements in the samples. Bio-C Temp and Ultracal XS showed a significant pH increase from 24 to 168 hours (p<0.05). Ultracal XS showed a higher pH value at 24 hours than Bio-C Temp (p<0.05) but were similar at 72 and 168h (p > 0.05). Calcium ion release did not depend on the experimental period (p > 0.05). Bio-C Temp showed lower calcium ions release than Ultracal XS at 24 hours (p<0.05). SEM-EDS analyses showed the remains of both medications, but the concentration of Si, Al, and W ions was present only in the calcium silicate-based medication. Bio-C Temp presented alkaline pH and a satisfactory calcium ion release over the time. The remaining of both medications were present after the protocols for paste removal.
Topics: Animals; Cattle; Calcium; Dental Pulp Cavity; Calcium Hydroxide; Hydrogen-Ion Concentration; Bandages; Spectrum Analysis; Root Canal Filling Materials
PubMed: 37909642
DOI: 10.1590/0103-6440202305506 -
Journal of the American Veterinary... Apr 2024To analyze the content of unlicensed GS-441524-like products being used as a largely successful at-home treatment for cats suspected to have FIP. The remdesivir content...
OBJECTIVE
To analyze the content of unlicensed GS-441524-like products being used as a largely successful at-home treatment for cats suspected to have FIP. The remdesivir content and pH were also measured.
SAMPLE
127 injectable and oral samples from 30 of the most popular brands of black market producers.
METHODS
Unlicensed GS-441524-like products were procured through donations and tested for GS-441524 and remdesivir content by liquid chromatography with tandem mass spectrometry. A pH meter measured the pH of injectable samples.
RESULTS
Of the 87 injectable formulations, 95% contained more (on average 39% more) GS-441524 than expected based on the producer's marketed concentrations. The average pH (1.30 pH) was well below the physiologic pH conditions recommended for SC injections. The oral formulations were more variable, with 43% containing more GS-441524 (on average 75% more) than expected and 58% containing less (on average 39% less) than the expected content. There was minimal variability in GS-441524 content between replicate samples in the injectables formulations (measured by coefficient of variation). One injectable and 2 oral samples additionally contained remdesivir.
CLINICAL RELEVANCE
All unlicensed products used for the at-home treatment of FIP that we tested contain GS-441524. The injectables generally contain significantly more drug than advertised at a below-physiologic pH. Unlicensed oral products vary more widely in drug content and suffer from unconventional dosing and labeling. These data should highlight the need for regulation of these products and the development of legal pathways to procure GS-441524.
Topics: Cats; Animals; Feline Infectious Peritonitis; Adenosine; Antiviral Agents; Cat Diseases
PubMed: 38324994
DOI: 10.2460/javma.23.08.0466