-
Pharmaceutics Aug 2023The aim of this project is to use pectin- and chitosan-modified solid lipid nanoparticles for bovine lactoferrin to enhance its cellular uptake and transport.
AIM
The aim of this project is to use pectin- and chitosan-modified solid lipid nanoparticles for bovine lactoferrin to enhance its cellular uptake and transport.
METHODS
Solid lipid particles containing bovine lactoferrin (bLf) were formulated through the solvent evaporation technique, incorporating stearic acid along with either chitosan or pectin modification. bLf cellular uptake and transport were evaluated in vitro using the human adenocarcinoma cell line Caco-2 cell model.
RESULTS AND DISCUSSION
The bLf-loaded SLPs showed no significant effect on cytotoxicity and did not induce apoptosis within the eight-hour investigation. The use of confocal laser scanning microscopy confirmed that bLf follows the receptor-mediated endocytosis, whereas the primary mechanism for the cellular uptake of SLPs was endocytosis. The bLf-loaded SLPs had significantly more cellular uptake compared to bLf alone, and it was observed that this impact varied based on the time, temperature, and concentration. Verapamil and EDTA were determined to raise the apparent permeability coefficients (App) of bLf and bLf-loaded SLPs.
CONCLUSION
This occurred because they hindered efflux by interacting with P-glycoproteins and had a penetration-enhancing influence. These findings propose the possibility of an additional absorption mechanism for SLPs, potentially involving active transportation facilitated by the P-glycoprotein transporter in Caco-2 cells. These results suggest that SLPs have the potential to be applied as effective carriers to improve the oral bioavailability of proteins and peptides.
PubMed: 37631382
DOI: 10.3390/pharmaceutics15082168 -
ACS Applied Bio Materials Aug 2023Natural polymers from organic wastes have gained increasing attention in the biomedical field as resourceful second raw materials for the design of biomedical devices...
Natural polymers from organic wastes have gained increasing attention in the biomedical field as resourceful second raw materials for the design of biomedical devices which can perform a specific bioactive function and eventually degrade without liberating toxic residues in the surroundings. In this context, patches and bandages, that need to support the skin wound healing process for a short amount of time to be then discarded, certainly constitute good candidates in our quest for a more environmentally friendly management. Here, we propose a plant-based microfibrous scaffold, loaded with vitamin C (VitC), a bioactive molecule which acts as a protecting agent against UV damages and as a wound healing promoter. Fibers were fabricated via electrospinning from various zein/pectin formulations, and subsequently cross-linked in the presence of Ca to confer them a hydrogel-like behavior, which we exploited to tune both the drug release profile and the scaffold degradation. A comprehensive characterization of the physico-chemical properties of the zein/pectin/VitC scaffolds, either pristine or cross-linked, has been carried out, together with the bioactivity assessment with two representative skin cell populations (human dermal fibroblast cells and skin keratinocytes, HaCaT cells). Interestingly, col-1a gene expression of dermal fibroblasts increased after 3 days of growth in the presence of the microfiber extraction media, indicating that the released VitC was able to stimulate collagen mRNA production overtime. Antioxidant activity was analyzed on HaCaT cells via DCFH-DA assay, highlighting a fluorescence intensity decrease proportional to the amount of loaded VitC (down to 50 and 30%), confirming the protective effect of the matrices against oxidative stress. Finally, the most performing samples were selected for the in vivo test on a skin UVB-burn mouse model, where our constructs demonstrated to significantly reduce the inflammatory cytokines expression in the injured area (50% lower than the control), thus constituting a promising, environmentally sustainable alternative to skin patches.
Topics: Animals; Humans; Male; Mice; Antioxidants; Ascorbic Acid; Biocompatible Materials; Burns; Cell Line; Hydrogels; Keratinocytes; Mice, Inbred C57BL; Wound Healing; Zein; Zea mays
PubMed: 37493659
DOI: 10.1021/acsabm.3c00214 -
JGH Open : An Open Access Journal of... May 2024To evaluate the efficacy and safety of minocycline, vonoprazan, amoxicillin, and bismuth quadruple therapy for () treatment.
BACKGROUND AND AIM
To evaluate the efficacy and safety of minocycline, vonoprazan, amoxicillin, and bismuth quadruple therapy for () treatment.
METHODS
From August 2022 to May 2023, clinical data were collected from patients who received eradication treatment at West China Fourth Hospital, Sichuan University. One group received the MVAB regimen (amoxicillin, minocycline, vonoprazan, and colloidal bismuth pectin), while another group received the FOAB regimen (amoxicillin, furazolidone, omeprazole, and colloidal bismuth pectin), both administered for 14 days. Follow-up assessments of safety and compliance were conducted within 1 week after treatment completion. One and a half months after treatment, the success of eradication was evaluated using the urea breath test.
RESULTS
For the MVAB regimen as a first-line treatment, the eradication rate was 90.1% (127/141, 95% CI: 85.1-95.1%) in the ITT analysis and 93.4% (127/136, 95% CI: 89.2-97.6%) in the PP analysis as a first-line treatment. As a second-line treatment, the eradication rate was 91.3% (21/23, 95% CI: 78.8-103.8%) in both analyses. For the FOAB regimen as a first-line treatment, the eradication rate was 98.0% (50/51, 95% CI: 94.1-101.2%) in the ITT analysis and 100% (50/50, 95% CI: 100%) in the PP analysis. As a second-line treatment, the eradication rate was 100% (6/6, 95% CI: 100%) in both analyses. Moreover, there was no significant difference in the incidence of adverse events between the two groups (MVAB regimen: 5.5% and FOAB regimen: 8.8%; > 0.05).
CONCLUSIONS
The MVAB regimen could indeed be a viable alternative treatment option to conventional therapies.
PubMed: 38699469
DOI: 10.1002/jgh3.13070 -
International Journal of Biological... Mar 2024Porous morphology and mechanical properties determine the applications of cryogels. To understand the influence of the ionic network on the microstructure and mechanical...
Porous morphology and mechanical properties determine the applications of cryogels. To understand the influence of the ionic network on the microstructure and mechanical properties of pectin cryogels, we prepared low-methoxyl pectin (LMP) cryogels with different Ca concentrations (measured as R-value, ranging from 0 to 2) through freeze-drying (FD). Results showed that the R-values appeared to be crucial parameters that impact the pore morphology and mechanical characteristics of cryogels. It is achieved by altering the network stability and water state properties of the cryogel precursor. Cryogel precursors with a saturated R-value (R = 1) produced a low pore diameter (0.12 mm) microstructure, obtaining the highest crispness (15.00 ± 1.85) and hardness (maximum positive force and area measuring 2.36 ± 0.31 N and 12.30 ± 1.57 N·s respectively). Hardness showed a negative correlation with Ca concentration when R ≤ 1 (-0.89), and a similar correlation with the porosity of the gel network when R ≥ 1 (-0.80). Given the impacts of crosslinking on the pore structure, it is confirmed that the pore diameter can be designed between 56.24 and 153.58 μm by controlling R-value in the range of 0-2.
Topics: Cryogels; Pectins; Mechanical Phenomena; Porosity; Hardness
PubMed: 38340927
DOI: 10.1016/j.ijbiomac.2024.130028 -
International Journal of Biological... May 2024Enzymatic degradation of plant biomass requires the coordinated action of various enzymes. In this study, the production of reducing sugars from pectic substrates and...
Enzymatic degradation of plant biomass requires the coordinated action of various enzymes. In this study, the production of reducing sugars from pectic substrates and sugar beet pulp (SBP) was investigated and compared using commercial enzyme preparations, including M2, pectinase (E1), Viscozyme L (V-L) and L-40. V-L, a cellulolytic enzyme mix produced by Aspergillus sp. was further evaluated as the most robust enzyme cocktail with the strongest SBP degradation ability in terms of the release of monosaccharides, methanol, and acetate from SBP. Mass-spectrometry-based proteomics analysis of V-L revealed 156 individual proteins. Of these, 101 proteins were annotated as containing a carbohydrate-active enzyme module. Notably, of the 50 most abundant proteins, ca. 44 % were predicted to be involved in pectin degradation. To reveal the role of individual putative key enzymes in pectic substrate decomposition, two abundant galacturonases (PglA and PglB), were heterologously expressed in Pichia pastoris and further characterized. PglA and PglB demonstrated maximum activity at 57 °C and 68 °C, respectively, and exhibited endo-type cleavage patterns towards polygalacturonic acid. Further studies along this line may lead to a better understanding of efficient SBP degradation and may help to design improved artificial enzyme mixtures with lower complexity for future application in biotechnology.
Topics: Pectins; Proteomics; Substrate Specificity; Polygalacturonase; Beta vulgaris; Aspergillus
PubMed: 38580019
DOI: 10.1016/j.ijbiomac.2024.131309 -
Cells Feb 2024In this study, we investigated the beneficial effects of grapefruit IntegroPectin, derived from industrial waste grapefruit peels via hydrodynamic cavitation, on...
In this study, we investigated the beneficial effects of grapefruit IntegroPectin, derived from industrial waste grapefruit peels via hydrodynamic cavitation, on microglia cells exposed to oxidative stress conditions. Grapefruit IntegroPectin fully counteracted cell death and the apoptotic process induced by cell exposure to tert-butyl hydroperoxide (TBH), a powerful hydroperoxide. The protective effects of the grapefruit IntegroPectin were accompanied with a decrease in the amount of ROS, and were strictly dependent on the activation of the phosphoinositide 3-kinase (PI3K)/Akt cascade. Finally, IntegroPectin treatment inhibited the neuroinflammatory response and the basal microglia activation by down-regulating the PI3K- nuclear factor kappa-light-chain-enhancer of activated B cells (NF-kB)- inducible nitric oxide synthase (iNOS) cascade. These data strongly support further investigations aimed at exploring IntegroPectin's therapeutic role in in vivo models of neurodegenerative disorders, characterized by a combination of chronic neurodegeneration, oxidative stress and neuroinflammation.
Topics: Humans; Microglia; Citrus paradisi; Phosphatidylinositol 3-Kinases; Anti-Inflammatory Agents; Cell Line
PubMed: 38391968
DOI: 10.3390/cells13040355 -
International Journal of Biological... Mar 2024The current research work focuses on preparing the polycaprolactone (PCL) based nanocomposite films embedded with surface modified Halloysite Nanotube (HNT). The avenue...
The current research work focuses on preparing the polycaprolactone (PCL) based nanocomposite films embedded with surface modified Halloysite Nanotube (HNT). The avenue of the study is to unravel the applicability of polymer nanocomposites for wound healing. The flexible property of HNT was taken as the major force to accomplish the addition of biopolymer pectin onto its surface. Functionalization of HNT with pectin has certainly enhanced its binding nature with the polymer. The PCL nanocomposite films were characterized by several promising techniques such as FTIR, XRD, DSC-TGA, FESEM, TEM, AFM, and mechanical properties were too examined along. When compared to the plane PCL film, the nanocomposite films manifested favorable results in terms of mechanical and chemical properties. Additionally, biometric studies such as in-vitro swelling, enzymatic degradation, and hemolysis performed on the films gave extremely good results. The haemolytic percentage recorded for the films exhibited a steady decrease with increasing amount of nanofillers. The MTT assay showed cell proliferation and its increase as the embedded HNT is more in the matrix. Wound closure study performed on NIH3T3 cell line with 1, 3 and 5wt% of films has given a strong proof for the involvement of polymer and HNT in the healing procedure.
Topics: Mice; Animals; Clay; Pectins; NIH 3T3 Cells; Wound Healing; Polymers; Nanotubes; Nanocomposites; Polyesters
PubMed: 38365152
DOI: 10.1016/j.ijbiomac.2024.130140 -
International Journal of Biological... May 2024This study investigates the synthesis of selenium nanoparticles (SeNPs), owing to the low cost and abundance of selenium. However, the toxicity of SeNP prompts the...
Design, fabrication, and evaluation of keratin and pectin incorporated supramolecular structured zero-oxidation state selenium nanogel blended 3D printed transdermal patch.
This study investigates the synthesis of selenium nanoparticles (SeNPs), owing to the low cost and abundance of selenium. However, the toxicity of SeNP prompts the development of a selenium nanocomposite (SeNC) containing pectin, keratin, and ferulic acid to improve the bioactivity of Se[0]. Further, incorporating the SeNC in a suitable formulation for drug delivery as a transdermal patch was worth studying. Accordingly, various analytical techniques were used to characterize the SeNPs and the SeNC, confirming successful synthesis and encapsulation. The SeNC exhibited notable particle size of 448.2 ± 50.2 nm, high encapsulation efficiency (98.90 % ± 2.4 %), 28.1 ± 0.45 drug loading, and sustained drug release at pH 5.5. Zeta potential and XPS confirmed the zero-oxidation state. The supramolecular structure was evident from spectral analysis endorsing the semi-crystalline nature of the SeNC and SEM images showcasing flower-shaped structures. Further, the SeNC demonstrated sustained drug release (approx. 22 % at 48 h) and wound-healing potential in L929 fibroblast cells. Subsequently, the SeNC loaded into a gelling agent exhibited shear thinning properties and improved drug release by nearly 58 %. A 3D printed reservoir-type transdermal patch was developed utilizing the SeNC-loaded gel, surpassing commercially available patches in characteristics such as % moisture uptake, tensile strength, and hydrophobicity. The patch, evaluated through permeation studies and CAM assay, exhibited controlled drug release and angiogenic properties for enhanced wound healing. The study concludes that this patch can serve as a smart dressing with tailored functionality for different wound stages, offering a promising novel drug delivery system for wound healing.
Topics: Selenium; Pectins; Transdermal Patch; Keratins; Animals; Drug Liberation; Printing, Three-Dimensional; Nanogels; Mice; Oxidation-Reduction; Wound Healing; Cell Line; Nanocomposites; Drug Carriers; Drug Delivery Systems; Particle Size
PubMed: 38692999
DOI: 10.1016/j.ijbiomac.2024.131769 -
Plant, Cell & Environment May 2024The plant cell wall is a plastic structure of variable composition that constitutes the first line of defence against environmental challenges. Lodging and drought are...
The plant cell wall is a plastic structure of variable composition that constitutes the first line of defence against environmental challenges. Lodging and drought are two stressful conditions that severely impact maize yield. In a previous work, we characterised the cell walls of two maize inbreds, EA2024 (susceptible) and B73 (resistant) to stalk lodging. Here, we show that drought induces distinct phenotypical, physiological, cell wall, and transcriptional changes in the two inbreds, with B73 exhibiting lower tolerance to this stress than EA2024. In control conditions, EA2024 stalks had higher levels of cellulose, uronic acids and p-coumarate than B73. However, upon drought EA2024 displayed increased levels of arabinose-enriched polymers, such as pectin-arabinans and arabinogalactan proteins, and a decreased lignin content. By contrast, B73 displayed a deeper rearrangement of cell walls upon drought, including modifications in lignin composition (increased S subunits and S/G ratio; decreased H subunits) and an increase of uronic acids. Drought induced more substantial changes in gene expression in B73 compared to EA2024, particularly in cell wall-related genes, that were modulated in an inbred-specific manner. Transcription factor enrichment assays unveiled inbred-specific regulatory networks coordinating cell wall genes expression. Altogether, these findings reveal that B73 and EA2024 inbreds, with opposite stalk-lodging phenotypes, undertake different cell wall modification strategies in response to drought. We propose that the specific cell wall composition conferring lodging resistance to B73, compromises its cell wall plasticity, and renders this inbred more susceptible to drought.
Topics: Lignin; Zea mays; Droughts; Cell Wall; Uronic Acids
PubMed: 38317308
DOI: 10.1111/pce.14822 -
Physiologia Plantarum 2024During microspore embryogenesis, microspores are induced to develop into haploid embryos. In Brassica napus, microspore embryogenesis is induced by a heat shock (HS),...
The different response of Brassica napus genotypes to microspore embryogenesis induced by heat shock and trichostatin A is not determined by changes in cell wall structure and composition but by different stress tolerance.
During microspore embryogenesis, microspores are induced to develop into haploid embryos. In Brassica napus, microspore embryogenesis is induced by a heat shock (HS), which initially produces embryogenic structures with different cell wall architectures and compositions, and with different potentials to develop into embryos. The B. napus DH4079 and DH12075 genotypes have high and very low embryo yields, respectively. In DH12075, embryo yield is greatly increased by combining HS and the histone deacetylase (HDAC) inhibitor trichostatin A (TSA). However, we show that HS + TSA inhibits embryogenesis in the highly embryogenic DH4079 line. To ascertain why TSA has such different effects in these lines, we treated DH4079 and DH12075 microspore cultures with TSA and compared the cell wall structure and composition of the different embryogenic structures in both lines, specifically the in situ levels and distribution of callose, cellulose, arabinogalactan proteins and high and low methyl-esterified pectin. For both lines, HS + TSA led to the formation of cell walls unfavorable for embryogenesis progression, with reduced levels of arabinogalactan proteins, reduced cell adhesion of inner walls and altered pectin composition. Thus, TSA effects on cell walls cannot explain their different embryogenic response to TSA. We also applied TSA to DH4079 cultures at different times and concentrations before HS application, with no negative effects on embryogenic induction. These results indicate that DH4079 microspores are hypersensitive to combined TSA and HS treatments, and open up new hypotheses about the causes of such hypersensitivity.
Topics: Brassica napus; Cell Wall; Hydroxamic Acids; Heat-Shock Response; Genotype; Pollen; Stress, Physiological
PubMed: 38923567
DOI: 10.1111/ppl.14405