-
Journal of Advanced Research Jul 2023Environmental microparticle is becoming a global pollutant and the entire population is increasingly exposed to the microparticles from artificial materials. The...
INTRODUCTION
Environmental microparticle is becoming a global pollutant and the entire population is increasingly exposed to the microparticles from artificial materials. The accumulation of microparticles including microplastics and its subsequent effects need to be investigated timely to keep sustainable development of human society.
OBJECTIVES
This study aimed to explore the accumulation of environmental particles in thrombus, the pathological structure in the blood circulation system.
METHODS
Patients receiving cardiovascular surgical operations were screened and twenty-six thrombi were collected, digested and filtered. Non-soluble microparticles were enriched on the filter membrane and then were analyzed and identified with Raman Spectrometer. The associations of particle status (presence or absence) or particle number in the thrombus and clinical indicators were examined. One strict quality control-particle detection system was designed to eliminate environmental contaminations.
RESULTS
Among twenty-six thrombi, sixteen contained eighty-seven identified particles ranging from 2.1 to 26.0 μm in size. The number of microparticles in each thrombus ranged from one to fifteen with the median reaching five. All the particles found in thrombi were irregularly block-shaped. Totally, twenty-one phthalocyanine particles, one Hostasol-Green particle, and one low-density polyethylene microplastic, which were from synthetic materials, were identified in thrombi. The rest microparticles included iron compounds and metallic oxides. After the adjustment for potential confounders, a significantly positive association between microparticle number and blood platelet levels was detected (P < 0.01).
CONCLUSION
This study provides the first photograph and Raman spectrum evidence of microparticles in thrombi. A large number of non-soluble particles including synthetic material microparticles could accumulate in arteries, suggesting that the risk of microparticle exposure was under-estimated and the re-evaluation of its health effects is urgently needed. There will be a series of reports on assessing the health effects of microparticle exposure in humans in the future and this research provided clues for the subsequent research.
Topics: Humans; Microplastics; Plastics; Thrombosis; Blood Platelets; Polyethylene
PubMed: 36116710
DOI: 10.1016/j.jare.2022.09.004 -
Journal of ISAKOS : Joint Disorders &... Oct 2023Anatomical total shoulder arthroplasty in its modern form where it reproduces the normal shoulder has been utilized clinically for more than half a century. As the... (Review)
Review
Anatomical total shoulder arthroplasty in its modern form where it reproduces the normal shoulder has been utilized clinically for more than half a century. As the technology and the designs have changed to recreate the humeral and glenoid sides of the joint, the sophistication of design has resulted in the growing number of cases annually worldwide. This increase is due in part to the increasing number of indications that the prosthesis can treat with successful results. On the humeral side, there have been design changes to better reflect the proximal humeral anatomy, and humeral stems are increasingly placed safely without cement. Platform systems which allow conversion of a failed arthroplasty to a reverse configuration without stem extraction is another design change. Similarly, there has been increasing utilization of short stem and stemless humeral components. Extensive experience with shorter stem and stemless devices, however, has yet to demonstrate the purported advantages of these devices, as recent studies have demonstrated equivalent blood loss, fracture rates, operative times, and outcome scores. Easier revision with these shorter stems remains to be definitively established, with only one study comparing the ease of revision between stem types. On the glenoid side, hybrid cementless glenoids, inlay glenoids, cementless all-polyethylene glenoids, and augmented glenoids have all been investigated; however, the indications for these devices remain unclear. Lastly, innovative surgical approaches to implanting shoulder arthroplasty and the use of patient specific guides and computerized planning, while interesting concepts, still await validation before they are utilized on a widespread basis. While reverse shoulder arthroplasty has been increasingly used to reconstruct the arthritic shoulder, anatomic glenohumeral replacement maintains a significant role in the armamentarium of the shoulder surgeon.
Topics: Humans; Prosthesis Design; Arthroplasty, Replacement, Shoulder; Joint Prosthesis; Shoulder Prosthesis; Polyethylene
PubMed: 37207983
DOI: 10.1016/j.jisako.2023.05.001 -
Ecotoxicology and Environmental Safety Sep 2023Polyethylene microplastics have been detected in farmland soil, irrigation water, and soil organisms in agroecosystems, while plastic mulching is suggested as a crucial... (Review)
Review
Polyethylene microplastics have been detected in farmland soil, irrigation water, and soil organisms in agroecosystems, while plastic mulching is suggested as a crucial source of microplastic pollution in the agroecosystem. Plastic mulch can be broken down from plastic mulch debris to microplastics through environmental aging and degradation process in farmlands, and the colonization of polyethylene-degrading microorganisms on polyethylene microplastics can eventually enzymatically depolymerize the polyethylene molecular chains with CO release through the tricarboxylic acid cycle. The selective colonization of microplastics by soil microorganisms can cause changes in soil microbial community composition, and it can consequently elicit changes in enzyme activities and nutrient element content in the soil. The biological uptake of polyethylene microplastics and the associated disturbance of energy investment are the main mechanisms impacting soil-dwelling animal development and behavior. As polyethylene microplastics are highly hydrophobic, their presence among soil particles can contribute to soil water repellency and influence soil water availability. Polyethylene microplastics have been shown to cause impacts on crop plant growth, as manifested by the effects of polyethylene microplastics on soil properties and soil biota in the agroecosystems. This review reveals the degradation process, biological impacts, and associated mechanisms of polyethylene microplastics in agroecosystems and could be a critical reference for their risk assessment and management.
Topics: Animals; Microplastics; Plastics; Agriculture; Polyethylene; Soil Pollutants; Soil
PubMed: 37499389
DOI: 10.1016/j.ecoenv.2023.115274 -
NanoImpact Oct 2023Plastic waste has been produced at a rapidly growing rate over the past several decades. The environmental impacts of plastic waste on marine and terrestrial ecosystems... (Review)
Review
Plastic waste has been produced at a rapidly growing rate over the past several decades. The environmental impacts of plastic waste on marine and terrestrial ecosystems have been recognized for years. Recently, researchers found that micro- and nanoplastics (MNPs), micron (100 nm - 5 mm) and nanometer (1 - 100 nm) scale particles and fibers produced by degradation and fragmentation of plastic waste in the environment, have become an important emerging environmental and food chain contaminant with uncertain consequences for human health. This review provides a comprehensive summary of recent findings from studies of potential toxicity and adverse health impacts of MNPs in terrestrial mammals, including studies in both in vitro cellular and in vivo mammalian models. Also reviewed here are recently released biomonitoring studies that have characterized the bioaccumulation, biodistribution, and excretion of MNPs in humans. The majority MNPs in the environment to which humans are most likely to be exposed, are of irregular shapes, varied sizes, and mixed compositions, and are defined as secondary MNPs. However, the MNPs used in most toxicity studies to date were commercially available primary MNPs of polystyrene (PS), polyethylene (PE), polyvinyl chloride (PVC), polyethylene terephthalate (PET), and other polymers. The emerging in vitro and in vivo evidence reviewed here suggests that MNP toxicity and bioactivity are largely determined by MNP particle physico-chemical characteristics, including size, shape, polymer type, and surface properties. For human exposure, MNPs have been identified in human blood, urine, feces, and placenta, which pose potential health risks. The evidence to date suggests that the mechanisms underlying MNP toxicity at the cellular level are primarily driven by oxidative stress. Nonetheless, large knowledge gaps in our understanding of MNP toxicity and the potential health impacts of MNP exposures still exist and much further study is needed to bridge those gaps. This includes human population exposure studies to determine the environmentally relevant MNP polymers and exposure concentrations and durations for toxicity studies, as well as toxicity studies employing environmentally relevant MNPs, with surface chemistries and other physico-chemical properties consistent with MNP particles in the environment. It is especially important to obtain comprehensive toxicological data for these MNPs to understand the range and extent of potential adverse impacts of microplastic pollutants on humans and other organisms.
Topics: Humans; Animals; Female; Pregnancy; Ecosystem; Microplastics; Plastics; Tissue Distribution; Polyethylene; Mammals
PubMed: 37717636
DOI: 10.1016/j.impact.2023.100481 -
Frontiers in Immunology 2023Classically, particle-induced periprosthetic osteolysis at the implant-bone interface has explained the aseptic loosening of joint replacement. This response is preceded... (Review)
Review
Classically, particle-induced periprosthetic osteolysis at the implant-bone interface has explained the aseptic loosening of joint replacement. This response is preceded by triggering both the innate and acquired immune response with subsequent activation of osteoclasts, the bone-resorbing cells. Although particle-induced periprosthetic osteolysis has been considered a foreign body chronic inflammation mediated by myelomonocytic-derived cells, current reports describe wide heterogeneous inflammatory cells infiltrating the periprosthetic tissues. This review aims to discuss the role of those non-myelomonocytic cells in periprosthetic tissues exposed to wear particles by showing original data. Specifically, we discuss the role of T cells (CD3, CD4, and CD8) and B cells (CD20) coexisting with CD68/TRAP multinucleated giant cells associated with both polyethylene and metallic particles infiltrating retrieved periprosthetic membranes. This review contributes valuable insight to support the complex cell and molecular mechanisms behind the aseptic loosening theories of orthopedic implants.
Topics: Humans; Osteolysis; Joint Prosthesis; Osteoclasts; Inflammation; Polyethylene
PubMed: 38106424
DOI: 10.3389/fimmu.2023.1310262 -
EBioMedicine Nov 2023Microplastics (MPs) have garnered widespread attention because of their presence in human placenta, stool, and even blood. Ingestion is considered the major route of...
BACKGROUND
Microplastics (MPs) have garnered widespread attention because of their presence in human placenta, stool, and even blood. Ingestion is considered the major route of human exposure to MPs. It has been found that the consumption of food and water is associated with more MP abundance in human stools. The usage of plastic containers, particularly feeding bottles, may be a major contributor to MP contamination. However, human exposure to MPs and potential factors that influence exposure, especially for preschoolers, remains largely unknown. When exposed to MPs, mice exhibited gut microbiota dysbiosis, including alterations in diversity indices, a decreased relative abundance of probiotics and an increased abundance of pathogenic bacteria. Such results have also been observed in human gut in vitro models, however, the actual association between MP exposure and human intestinal microbiota remains unclear. Therefore, this study aimed to evaluate MP concentrations in preschoolers' stools, explore possible dietary factors that influence preschooler exposure to MPs, and investigate their potential association with the gut microbiota.
METHODS
A cross-sectional study was conducted in Xiamen, China in October 2022. We investigated the feeding behaviours and dietary habits of preschool children. A total of 69 couples of stool samples were collected and analyzed for MPs test and gut microbiota analysis. Pyrolysis-gas chromatography coupled with mass spectrometry (Py-GC/MS) was used for quantifying 11 types of MPs. The gut microbiota composition was analyzed by 16S rRNA gene sequencing.
FINDINGS
The results showed that only polyvinyl chloride (PVC), polyethylene terephthalate (PET), polyethylene (PE), and polyamide 6 (PA6) were detected in 85.5% stool samples, with concentrations of 317.4 (152.0, 491.9) μg/g dw, 299.0 (196.1, 619.9) μg/g dw, 206.2 (154.1, 240.3) μg/g dw, and 17.9 (13.4, 18.6) μg/g dw, respectively. The median estimated daily intake (EDI) for preschoolers was 425.9 (272.5, 762.3) μg/kg-bw/d. Dairy intake may influence MP concentration in preschoolers' stools, and the usage of feeding bottles may be a specific source of MP contamination. Moreover, higher PVC concentrations were observed in the stools when the children took more time to eat a meal. MP exposure was inversely associated with alpha indices and possibly affected certain probiotic taxa, such as Parabacteroides and Alistipes, in preschool children.
INTERPRETATION
Our data provided baseline evidence for MP exposure doses and potential dietary factors that may influence MP exposure in preschoolers. These findings supported the perspective that MP exposure might be associated with the disturbance of gut microbiota. Further studies focusing on sensitive populations with larger sample sizes are needed.
FUNDING
This study was funded by the National Natural Science Foundation of China (grant number: 82003412), the Shanghai Municipal Health Commission (grant number: 20214Y0019), and the Project of Shanghai Municipal Financial Professional foundation (Food Safety Risk Assessment) (grant number: RA-2022-06).
Topics: Humans; Child, Preschool; Animals; Mice; Microplastics; Plastics; Gastrointestinal Microbiome; Pilot Projects; RNA, Ribosomal, 16S; Cross-Sectional Studies; China; Polyethylene; Water Pollutants, Chemical
PubMed: 37837933
DOI: 10.1016/j.ebiom.2023.104828 -
Facial Plastic Surgery Clinics of North... Feb 2024Microtia reconstruction is a complex procedure performed by the facial plastic and reconstructive surgeon and requires an expert understanding of the three-dimensional... (Review)
Review
Microtia reconstruction is a complex procedure performed by the facial plastic and reconstructive surgeon and requires an expert understanding of the three-dimensional structure of the ear. This article provides an overview of the evolution of microtia reconstruction through history. Techniques pioneered by microtia surgeons Drs. Radford Tanzer, Burt Brent, Satoru Nagata, and Françoise Firmin will be described along with an additional excerpt on the utilization of porous polyethylene (Medpor; Stryker, USA). The objective for the reader is to be able to summarize approaches of each major reconstructive technique, compare the differences in techniques, and gain an understanding of the advantages and disadvantages of each approach.
Topics: Humans; Congenital Microtia; Face; Polyethylene
PubMed: 37981407
DOI: 10.1016/j.fsc.2023.09.002 -
The Science of the Total Environment Nov 2023Investigation on the distribution and mechanism of co-pyrolysis products is vital to the directional control and high-value utilization of agriculture solid wastes....
Investigation on the distribution and mechanism of co-pyrolysis products is vital to the directional control and high-value utilization of agriculture solid wastes. Co-pyrolysis, devolatilization, kinetics characteristics, and evolution paths of corn stalk (CS) and low-density-polyethylene (LDPE) were investigated via thermogravimetric experiments. The co-pyrolysis behaviors could be separated into two stages: firstly, the degradation of CS (150- 400 °C); secondly, the degradation of CS (400- 550 °C). The devolatilization index (DI) increased with the addition of LDPE. Furthermore, a combination of devolatilization chemical analysis with product analysis to analyze the intrinsic mechanism during co-pyrolysis. The results indicated that the yield of alkanes and olefin in gas products increased with the addition of LDPE. Additionally, LDPE pyrolysis maybe abstract hydrogen from CS pyrolysis and evolved into hydrogen, methane, and ethylene. Further, the co-pyrolysis kinetic parameters were computed by using model-free isoconversion methods, which showed promotion of CS pyrolysis and the reduced activation energy. All the activation energy were declined, which indicated a "bidirectional positive effect" during co-pyrolysis. The mean activation energy of P-cellulose (P-CE), P-hemicellulose (P-HM), P-lignin (P-LG), and LDPE decreased by 23.49 %, 12.89 %, 15.36 %, and 27.82 %, respectively. This study further proves the hydrogen donor transfer pathway in the co-pyrolysis process of CS and LDPE, providing theoretical support for the resource utilization of agricultural solid waste.
Topics: Polyethylene; Biomass; Pyrolysis; Kinetics; Cellulose; Solid Waste
PubMed: 37442473
DOI: 10.1016/j.scitotenv.2023.165443 -
Environmental Pollution (Barking, Essex... Oct 2023In light of the current COVID-19 pandemic caused by the virus SARS-CoV-2, there is an urgent need to identify and investigate the various pathways of transmission. In... (Review)
Review
In light of the current COVID-19 pandemic caused by the virus SARS-CoV-2, there is an urgent need to identify and investigate the various pathways of transmission. In addition to contact and aerosol transmission of the virus, this review investigated the possibility of its transmission via microplastics found in sewage. Wastewater-based epidemiological studies on the virus have confirmed its presence and persistence in both influent sewage as well as treated ones. The hypothesis behind the study is that the huge amount of microplastics, especially Polyvinyl Chloride and Polyethylene particles released into the open waters from sewage can become a good substrate and vector for microbes, especially Polyvinyl Chloride and Polyethylene particles, imparting stability to microbes and aiding the "plastisphere" formation. A bibliometric analysis highlights the negligence of research toward plastispheres and their presence in sewage. The ubiquity of microplastics and their release along with the virus into the open waters increases the risk of viral plastispheres. These plastispheres may be ingested by aquatic organisms facilitating reverse zoonosis and the commercial organisms already reported with accumulating microplastics through the food chain poses a risk to human populations as well. Reliance of high population density areas on open waters served by untreated sewage in economically less developed countries might bring back viral transmission.
Topics: Humans; SARS-CoV-2; Sewage; COVID-19; Microplastics; Wastewater; Plastics; Pandemics; Polyvinyl Chloride; Polyethylene
PubMed: 37437759
DOI: 10.1016/j.envpol.2023.122171 -
Bulletin of Environmental Contamination... Dec 2023Every year, human activities introduce large amounts of synthetic plastics into the environment. Decomposition of the plastic derivatives is very difficult and time...
Every year, human activities introduce large amounts of synthetic plastics into the environment. Decomposition of the plastic derivatives is very difficult and time consuming, so it is essential to eliminate these pollutants using different methods. Bioremediation, is suitable option, because of the low cost and environmentally safe. In this research, degradation of low-density polyethylene (LDPE) was investigated by two strains, isolated from Hamadan province (Iran) landfill soil. After identification by 16sr DNA primers, their abilities of polyethylene biodegradation were examined by Fourier transform infrared (FTIR), SEM and Gas Chromatography-Mass Spectrometry (GC-MS). Using media contain polyethylene) after and before addition of bacteria), toxicity test was conducted by measuring the germination index, root and hypocotyl length of Lactuca sativa seed. After three months, 10.15% ± 1.04 weight loss of LDPE achieved through strain Stenotrophomonas sp. degradation. Both strains had high biofilm formation capacity, confirmed by Electron microscope images and FTIR analysis. GC-MS confirmed the presence of the end-product of LDPE degradation (Pentacosane, Hexacosane, and Octadecane). Both, Stenotrophomonas sp. and Alcaligenaceae bacterium had significant detoxification ability. In media contain LDPE (without bacteria), decrease in the germination of lettuce seeds was observed.
Topics: Humans; Polyethylene; Biodegradation, Environmental; Stenotrophomonas; Bacteria; Environmental Pollutants; Plastics
PubMed: 38142453
DOI: 10.1007/s00128-023-03836-z