-
International Journal of Biological... Nov 2023Sorption dehumidification, as an energy-saving and eco-friendly approach, has been emerging in application for air dehumidification. Here, a prospective method is...
Sorption dehumidification, as an energy-saving and eco-friendly approach, has been emerging in application for air dehumidification. Here, a prospective method is proposed to prepare biomass-based hygroscopic aerogels that are easily applicable, sustainable, high-efficient, and recyclable. The chitosan-based aerogel with a porous and hydrophilic network acts as the carrier and water reservoir for the uniformly distributed lithium chloride hygroscopic salt, and provides the hygroscopic salt with more liberal water channels to facilitate moisture capture and transfer. As a consequence, the prepared chitosan/polyvinyl alcohol@lithium chloride (chitosan/PVA@LiCl) hygroscopic aerogel exhibits an excellent moisture absorption capacity of up to 2.77 g g at a relative humidity of 90 %. Meanwhile, as the chitosan/PVA@LiCl aerogel is set in a closed space about 2200 times larger than its own volume, the relative humidity can be reduced from 90 % to 32 % within 2 h, and further lower to 25 % after 4 h. Furthermore, combined with multi-walled carbon nanotubes, the photothermal hygroscopic aerogel is obtained that can rapidly desorb water under sunlight, thus to realize energy-free cycle. Overall, the renewable biomass-based aerogel materials with the advantages of simple preparation and excellent hygroscopic performance provides a new path for the development of sorption dehumidification technology.
Topics: Chitosan; Gels; Wettability; Humidity; Porosity; Polyvinyl Alcohol; Water; Air; Hydrophobic and Hydrophilic Interactions; Biomass
PubMed: 37573918
DOI: 10.1016/j.ijbiomac.2023.126191 -
Journal of Materials Chemistry. B Aug 2023Microbial infection is the most common obstacle in the wound healing process, leading to wound healing impairment and complications and ultimately increasing morbidity...
Microbial infection is the most common obstacle in the wound healing process, leading to wound healing impairment and complications and ultimately increasing morbidity and mortality. Due to the rising number of pathogens evolving resistance to the existing antibiotics used for wound care, alternative approaches are urgently required. In this study, α-aminophosphonate derivatives as antimicrobial agents were synthesized and incorporated into self-crosslinked tri-component cryogels composed of fully hydrolyzed polyvinyl alcohol (PVA-F), partially hydrolyzed polyvinyl alcohol (PVA-P), and cellulose nanofibrils (CNFs). Initially, the antimicrobial activity of four α-aminophosphonate derivatives against selected skin bacterial species was tested and their minimum inhibitory concentration was determined based on which the most effective compound was loaded into the cryogels. Next, the physical and mechanical properties of cryogels with various blending ratios of PVA-P/PVA-F and fixed amounts of CNFs were assessed, and drug release profiles and biological activities of drug-loaded cryogels were analyzed. Assessment of α-aminophosphonate derivatives showed the highest efficacy of a cinnamaldehyde-based derivative (Cinnam) against both Gram-negative and Gram-positive bacteria compared to other derivatives. The physical and mechanical properties of cryogels showed that PVA-P/PVA-F with a 50/50 blending ratio had the highest swelling ratio (1600%), surface area (523 m g), and compression recoverability (72%) compared to that with other blending ratios. Finally, antimicrobial and biofilm development studies showed that the cryogel loaded with a Cinnam amount of 2 mg (relative to polymer weight) showed the most sustained drug release profile over 75 h and had the highest efficacy against Gram-negative and Gram-positive bacteria. In conclusion, self-crosslinked tri-component cryogels loaded with the synthesized α-aminophosphonate derivative, having both antimicrobial and anti-biofilm formation properties, can have a significant impact on the management of uprising wound infection.
Topics: Cryogels; Polyvinyl Alcohol; Cellulose; Anti-Infective Agents; Bandages
PubMed: 37403540
DOI: 10.1039/d3tb00926b -
International Journal of Biological... Sep 2023Ionic conductive hydrogels prepared from various biological macromolecules are ideal materials for the manufacture of human motion sensors from the perspective of...
Ionic conductive hydrogels prepared from various biological macromolecules are ideal materials for the manufacture of human motion sensors from the perspective of resource regeneration and environmental sustainability. However, it is now difficult to develop conductive hydrogels including excellent self-healing and mechanical properties, mainly due to their inherent trade-off between dynamic cross-linked healing and stable cross-linked mechanical strength. In this work, alkali lignin-Polyvinyl alcohol-polyacrylic acid double network conductive hydrogels with high mechanical strength and good self-healing properties were prepared. We formed the primary network structure by hydrogen bonding interaction between polyvinyl alcohol, alkali lignin and polyacrylic acid, and the secondary network structure by coordination interaction with polyacrylic acid through the addition of Fe. The added lignin acts as a dynamic linkage bridge in a porous network mediated by multiple ligand bonds, imparting superior mechanical properties to the hydrogels. The relationships between the alkali lignin and iron ion dosage and the comprehensive properties of hydrogels (adhesion, antibacterial, self-healing, electrical conductivity and mechanical properties) were studied in detail. On this basis, the hydrogels explored the role of lignin in the regulation of hydrogels properties and revealed the self-healing and conductive mechanism.
Topics: Humans; Polyvinyl Alcohol; Lignin; Hydrogels; Iron; Electric Conductivity; Ions
PubMed: 37481187
DOI: 10.1016/j.ijbiomac.2023.125913 -
Molecules (Basel, Switzerland) Sep 2023To enhance the mechanical strength and cell adhesion of alginate hydrogel, making it satisfy the requirements of an ideal tissue engineering scaffold, the grafting of...
To enhance the mechanical strength and cell adhesion of alginate hydrogel, making it satisfy the requirements of an ideal tissue engineering scaffold, the grafting of Arg-Gly-Asp (RGD) polypeptide sequence onto the alginate molecular chain was conducted by oxidation of sodium periodate and subsequent reduction amination of 2-methylpyridine borane complex (2-PBC) to synthesize alginate dialdehyde grafted RGD derivatives (ADA-RGD) with good cellular affinity. The interpenetrating network (IPN) composite hydrogels of alginate/polyvinyl alcohol/cellulose nanocrystals (ALG/PVA/CNCs) were fabricated through a physical mixture of ion cross-linking of sodium alginate (SA) with hydroxyapatite/D-glucono-δ-lactone (HAP/GDL), and physical cross-linking of polyvinyl alcohol (PVA) by a freezing/thawing method, using cellulose nanocrystals (CNCs) as the reinforcement agent. The effects of the addition of CNCs and different contents of PVA on the morphology, thermal stability, mechanical properties, swelling, biodegradability, and cell compatibility of the IPN composite hydrogels were investigated, and the effect of RGD grafting on the biological properties of the IPN composite hydrogels was also studied. The resultant IPN ALG/PVA/CNCs composite hydrogels exhibited good pore structure and regular 3D morphology, whose pore size and porosity could be regulated by adjusting PVA content and the addition of CNCs. By increasing the PVA content, the number of physical cross-linking points in PVA increased, resulting in greater stress support for the IPN composite hydrogels of ALG/PVA/CNCs and consequently improving their mechanical characteristics. The creation of the IPN ALG/PVA/CNCs composite hydrogels' physical cross-linking network through intramolecular or intermolecular hydrogen bonding led to improved thermal resistance and reduced swelling and biodegradation rate. Conversely, the ADA-RGD/PVA/CNCs IPN composite hydrogels exhibited a quicker degradation rate, attributed to the elimination of ADA-RGD by alkali. The results of the in vitro cytocompatibility showed that ALG/0.5PVA/0.3%CNCs and ADA-RGD/PVA/0.3%CNCs composite hydrogels showed better proliferative activity in comparison with other composite hydrogels, while ALG/PVA/0.3%CNCs and ADA-RGD/PVA/0.3%CNCs composite hydrogels displayed obvious proliferation effects, indicating that PVA, CNCs, and ADA-RGD with good biocompatibility were conducive to cell proliferation and differentiation for the IPN composite hydrogels.
Topics: Polyvinyl Alcohol; Hydrogels; Alginates; Oligopeptides; Cellulose; Nanoparticles
PubMed: 37764467
DOI: 10.3390/molecules28186692 -
Carbohydrate Polymers Jul 2023Polyvinyl alcohol (PVA) and chitosan (CS) are attractive polymeric feedstocks for developing eco-environmental materials. In this work, a biodegradable and antibacterial...
Polyvinyl alcohol (PVA) and chitosan (CS) are attractive polymeric feedstocks for developing eco-environmental materials. In this work, a biodegradable and antibacterial film was developed based on PVA blending with different long-chain alkyl and different contents of quaternary chitosan through solution casting, in which quaternary chitosan not only acted as an antibacterial agent but also improved hydrophobicity and mechanical properties. A novel peak appeared at 1470 cm in Transform Infrared Spectroscopy (FTIR) and a new CCl bond spectral peak at 200 eV in X-ray photoelectron spectroscopy (XPS) spectra suggested that CS was successfully modified by quaternary. Besides, the modified films have better antibacterial effects against Escherichia (E. coli) and Staphylococcus (S. aureus) and present stronger antioxidant properties. Optical properties demonstrated that the light transmittance on both UV and visible light showed a decreasing trend with the increase of the quaternary chitosan contents. Whereas the composite films have enhanced hydrophobicity than PVA film. Furthermore, the composite films had higher mechanical properties, in which Young's modulus, tensile strength, and elongation at break were 344.99 MPa, 39.12 MPa, and 507.09 %, respectively. This research demonstrated that the modified composite films could extend the shelf of life on antibacterial packaging.
Topics: Polyvinyl Alcohol; Chitosan; Staphylococcus aureus; Escherichia coli; Spectroscopy, Fourier Transform Infrared; Anti-Bacterial Agents; Hydrophobic and Hydrophilic Interactions; Food Packaging
PubMed: 37059517
DOI: 10.1016/j.carbpol.2023.120755 -
Colloids and Surfaces. B, Biointerfaces Sep 2023Tissue engineering has gained prominence during the past decade since it offers a key solution to defects associated with the tissue regeneration. The limited healing...
Tissue engineering has gained prominence during the past decade since it offers a key solution to defects associated with the tissue regeneration. The limited healing potential of the cartilage tissue damage has significant clinical implications. Herein, dysprosium (Dy) impregnated polyvinyl alcohol (PVA) hydrogels have been developed to enhance the therapeutic efficacy, enabling simultaneous diagnostic imaging and antibacterial drug delivery for potential applications in articular cartilage. Based on the favorable imaging features, Dy impregnated PVA hydrogels with enhanced stability were formed through successive steps of repeated cycles of freezing at - 30 °C for 21 h, thawing at 25 °C for 4 h and lyophilization. The tensile and compression tests of the hydrogels respectively determined a maximum of 3.88 and 1.58 MPa, which reflected better compatibility towards cartilage. The hydrogels fetched a sustained drug release for a period of 12 h with an associated swelling ratio of 80%. The potential of the resultant hydrogels in image diagnosis has been deliberated through their blue and yellow emissions in the visible region. Further, the computed tomography (CT) and magnetic resonance imaging characteristics of the hydrogels respectively accomplished a maximum of 343 Hounsfiled units (HU) and relaxivity of 7.25 mMs. The cytocompatibility of the hydrogels is also determined through in vitro tests performed in Murine pro B cell line (BA/F3) and human Megakaryocyte cell line (Mo7e) cell lines.
Topics: Mice; Humans; Animals; Polyvinyl Alcohol; Dysprosium; Cartilage, Articular; Hydrogels
PubMed: 37499545
DOI: 10.1016/j.colsurfb.2023.113470 -
ACS Nano Jul 2023Hydrogels are able to mimic the flexibility of biological tissues or skin, but they still cannot achieve satisfactory strength and toughness, greatly limiting their...
Hydrogels are able to mimic the flexibility of biological tissues or skin, but they still cannot achieve satisfactory strength and toughness, greatly limiting their scope of application. Natural wood can offer inspiration for designing high-strength hydrogels attributed to its anisotropic structure. Herein, we propose an integrated strategy for efficient preparation of ultrastrong hydrogels using a salting-assisted prestretching treatment. The as-prepared poly(vinyl alcohol)/cellulose nanofiber hybrid hydrogels show distinct wood-like anisotropy, including oriented molecular fiber bundles and extended grain size, which endows materials with extraordinarily comprehensive mechanical properties of ultimate breaking strength exceeding 40 MPa, strain approaching 250%, and toughness exceeding 60 MJ·m, and outstanding tear resistance. Impressively, the breaking strength and toughness of the reswollen preoriented hydrogels approach 10 MPa and 25 MJ·m, respectively. and tests demonstrate that the reswollen hydrogels do not affect the growth and viability of the cells, nor do they cause the inflammation or rejection of the mouse tissue, implying extremely low biotoxicity and perfect histocompatibility, showcasing bright prospects for application in artificial ligaments or tendons. The strategy provided in this study can be generalized to a variety of biocompatible polymers for the fabrication of high-performance hydrogels with anisotropic structures.
Topics: Animals; Mice; Hydrogels; Anisotropy; Polymers; Polyvinyl Alcohol
PubMed: 37439503
DOI: 10.1021/acsnano.3c01976 -
BMC Oral Health Jul 2023Polyvinyl ether siloxane (PVES) possesses ideal characteristics for making precise and accurate dental impressions. PVES dimensional stability owes to its better... (Meta-Analysis)
Meta-Analysis
BACKGROUND AND OBJECTIVES
Polyvinyl ether siloxane (PVES) possesses ideal characteristics for making precise and accurate dental impressions. PVES dimensional stability owes to its better polymeric properties derived from its parent materials poly ethers and polyvinyl siloxanes. As recommended use of chemical disinfecting agents is getting more popular, there is a growing concern associated with the effect of disinfectants on PVES dimensional stability. This study was aimed to understand the PVES behavior when subjected to chemical disinfectants.
MATERIALS AND METHODOLOGY
The data was collected from research studies retrieved from Google Scholar, Scopus, and PubMed using MeSH terms of keywords "vinyl polyether siloxane AND Disinfection" or (Vinyl polyether siloxane OR polyvinyl siloxane ether OR PVES) AND (disinfectant OR disinfection)" without any restriction to publication date. The PRISMA (Preferred Reporting Items for Systemic Review and Meta-Analysis) directions were observed during the data collection, screening of studies, and meta-analysis. The primary data were retrieved, and batch exported from databases using Harzing's Publish or Perish software; primary analysis was performed in Microsoft Excel, while statistical analysis for effect size, two-tailed p-values, and heterogeneity among studies was performed using Meta Essentials. The effect size was calculated using Hedge's g values at the 95% confidence level using the random-effects model. Heterogeneity among studies was measured using the Cochrane Q and I.
RESULTS AND CONCLUSION
Dental impressions made from the PVES elastomeric impression materials showed no significant changes in dimensional stability. Immersion in the chemical disinfectant for 10 min was associated with clinically irrelevant changes in the dimensions of the PVES impressions. Disinfection with sodium hypochlorite was associated with clinically significant changes in dimensions, with a two-tailed p-value of 0.049. Disinfection with 2-2.5% glutaraldehyde solution was not associated with any significant dimensional variability.
Topics: Humans; Disinfectants; Disinfection; Ether; Ethers; Ethyl Ethers; Polyvinyls; Siloxanes
PubMed: 37430254
DOI: 10.1186/s12903-023-03168-8 -
International Journal of Pharmaceutics Jul 2023Through 3D printing (3DP), many parameters of solid oral dosage forms can be customised, allowing for truly personalised medicine in a way that traditional...
Through 3D printing (3DP), many parameters of solid oral dosage forms can be customised, allowing for truly personalised medicine in a way that traditional pharmaceutical manufacturing would struggle to achieve. One of the many options for customisation involves dose titration, allowing for gradual weaning of a medication at dose intervals smaller than what is available commercially. In this study we demonstrate the high accuracy and precision of 3DP dose titration of caffeine, selected due to its global prevalence as a behavioural drug and well-known titration-dependent adverse reactions in humans. This was achieved using a simple filament base of polyvinyl alcohol, glycerol, and starch, utilising hot melt extrusion coupled with fused deposition modelling 3DP. Tablets containing 25 mg, 50 mg, and 100 mg doses of caffeine were successfully printed with drug content in the accepted range prescribed for conventional tablets (90 - 110%), and excellent precision whereby the weights of all doses showed a relative standard deviation of no more than 3%. Importantly, these results proved 3D printed tablets to be far superior to splitting a commercially available caffeine tablet. Additional assessment of filament and tablet samples were reviewed by differential scanning calorimetry, thermogravimetric analysis, HPLC, and scanning electron microscopy, showing no evidence of degradation of caffeine or the raw materials, with smooth and consistent filament extrusion. Upon dissolution, all tablets achieved greater than 70% release between 50 and 60 min, showing a predictable rapid release profile regardless of dose. The outcomes of this study highlight the benefits that dose titration with 3DP can offer, especially to more commonly prescribed medications that can have even more harmful withdrawal-induced adverse reactions.
Topics: Humans; Caffeine; Tablets; Polyvinyl Alcohol; Hot Melt Extrusion Technology; Printing, Three-Dimensional; Drug Liberation; Technology, Pharmaceutical
PubMed: 37315638
DOI: 10.1016/j.ijpharm.2023.123132 -
International Journal of Biological... Jul 2023Gallic acid is an important phenolic compound with extensive applications in the food and pharmaceutical industries due to its health-promoting properties. However, due...
Gallic acid is an important phenolic compound with extensive applications in the food and pharmaceutical industries due to its health-promoting properties. However, due to its poor solubility and bioavailability, it is rapidly excreted from the body. Therefore, β-cyclodextrin/chitosan-based (polyvinyl alcohol-co-acrylic acid) interpenetrating controlled release hydrogels were developed to improve its dissolution and bioavailability. pH, polymer ratios, dynamic and equilibrium swelling, porosity, sol-gel, FTIR, XRD, TGA, DSC, SEM and structural parameters like an average molecular weight between crosslinks, solvent interaction parameters, and diffusion coefficient affecting release behavior were investigated. The highest swelling and release were observed at pH 7.4. Furthermore, hydrogels showed good antioxidant and antibacterial properties. Hydrogels improved the bioavailability of gallic acid in a pharmacokinetics study in rabbits. In vitro biodegradation showed that hydrogels were more stable in blank PBS than lysozyme and collagenase. Hydrogels were safe for rabbits (3500 mg/kg) without causing hematological or histopathological changes. The hydrogels showed good biocompatibility, and no adverse reactions were observed. Moreover, the developed hydrogels can be used to improve the bioavailability of various other drugs.
Topics: Animals; Rabbits; Chitosan; Polyvinyl Alcohol; Hydrogels; Drug Delivery Systems; Hydrogen-Ion Concentration; Drug Liberation
PubMed: 37270135
DOI: 10.1016/j.ijbiomac.2023.125149