-
Chemosphere Dec 2023The extensive use and improper handling of plastics have caused extensive microplastic (MP) pollution in terrestrial environments. Di(2-ethylhexyl) phthalate (DEHP), the...
The extensive use and improper handling of plastics have caused extensive microplastic (MP) pollution in terrestrial environments. Di(2-ethylhexyl) phthalate (DEHP), the main additive used in plastics, is toxic to organisms and may pose risks to human and animal reproductive functions. However, research on the release behavior of DEHP from MPs is scarce. In this study, the effects of particle size and environmental conditions (temperature, pH, ionic strength, and cation type) on DEHP release from polylactide (PLA), polystyrene (PS), and polyvinyl chloride (PVC) MPs were determined by performing leaching experiments. The results showed that when particle size decreased, the content of DEHP in the MPs and the amount of released DEHP increased though increasing specific surface area. An increase in temperature also promoted DEHP release; when the temperature increased from 15 °C to 45 °C, the amount of DEHP released from PLA, PS, and PVC increased by 38.4%, 71.0%, and 109%, respectively. The lower the crystallinity, the greater the increase in the amount of DEHP released. Ionic strength inhibited the release of DEHP from MPs. When Na concentration increased from 0 to 200 mM, the amount of DEHP released from PLA, PS, and PVC decreased by 27.4%, 41.6%, and 35.3%, respectively. The effect of Ca on DEHP release from MPs was greater than that of Na. In addition, the process of DEHP release from MPs fit well with a pseudo-first-order kinetic model. The results of this study provide a theoretical basis for managing and controlling the risks associated with plastic wastes.
Topics: Animals; Humans; Diethylhexyl Phthalate; Plastics; Microplastics; Particle Size; Polyvinyl Chloride; Polyesters; Polystyrenes
PubMed: 37865205
DOI: 10.1016/j.chemosphere.2023.140474 -
Journal of the Mechanical Behavior of... Dec 2023The polymeric nanofiber may interact and control certain regeneration processes at the molecular level to repair damaged tissues. This research focuses on the...
The polymeric nanofiber may interact and control certain regeneration processes at the molecular level to repair damaged tissues. This research focuses on the development of characterization and antibacterial capabilities of polyvinyl alcohol (PVA)/chitosan (CS) nanofibres containing fucoidan (FUC) for tissue engineering as a skin tissue substitute. A control group consisting of 13% PVA/(0.1)% CS nanofiber was prepared. To confer antibacterial properties to the nanofiber, 10, 20, and 30 mg of FUC were incorporated into this control group. The scanning electron microscope (SEM) proved the homogeneous and beadless structures of the nanofibers. The antibacterial activity of the 13% PVA/(0.1)% CS/(10, 20, 30) FUC was tested against the S.aureus and E.coli and the results showed that with FUC addition, the antibacterial activities of the nanofibers increased. The biocompatibility test was performed with a fibroblast cell line for 1, 3, and 7 days of incubation and the results demonstrated that FUC addition enhanced the bioactivity of the 13% PVA/(0.1)% CS nanofibers. In addition, the biocompatibility results showed that 13% PVA/(0.1)% CS/10 FUC had the highest viability value for all incubation periods compared to the others. In addition, the tensile test results showed that; the maximum tensile strength value was observed for 13% PVA/(0.1)% CS/10 FUC nanofibers.
Topics: Chitosan; Polyvinyl Alcohol; Nanofibers; Polyvinyls; Tissue Engineering; Anti-Bacterial Agents; Staphylococcus aureus; Escherichia coli
PubMed: 37832172
DOI: 10.1016/j.jmbbm.2023.106163 -
The Science of the Total Environment Feb 2024Plastic pollution is an increasing environmental concern. Pollutants such as microplastics (< 5 mm) and pharmaceuticals often co-exist in the aquatic environment. The...
Plastic pollution is an increasing environmental concern. Pollutants such as microplastics (< 5 mm) and pharmaceuticals often co-exist in the aquatic environment. The current study aimed to elucidate the interaction of pharmaceuticals with microplastics and ascertain how the process of photo-oxidation of microplastics affected the adsorption of the pharmaceuticals. To this end, a mixture containing ibuprofen, carbamazepine, fluoxetine, venlafaxine and ofloxacin (16 μmol L each) was placed in contact with one of six either virgin or aged microplastic types. The virgin microplastics were acquired commercially and artificially aged in the laboratory. Polypropylene, polyethylene, polyethylene terephthalate, polyamide, polystyrene, and polyvinyl chloride microparticles at two sizes described as small (D < 35 μm) and large (D 95-157 μm) were evaluated. Results demonstrated that the study of virgin particles may underestimate the adsorption of micropollutants onto microplastics. For virgin particles, only small microparticles of polypropylene, polyethylene, polyvinyl chloride, and both sizes of polyamide adsorbed pharmaceuticals. Aging the microplastics increased significantly the adsorption of pharmaceuticals by microplastics. Fluoxetine adsorbed onto all aged microplastics, from 18 % (large polyethylene terephthalate) to 99 % (small polypropylene). The current investigation highlights the potential of microplastics to act as a vector for pharmaceuticals in freshwater, especially after aging.
Topics: Microplastics; Plastics; Polypropylenes; Polyethylene Terephthalates; Nylons; Adsorption; Polyvinyl Chloride; Fluoxetine; Water Pollutants, Chemical; Fresh Water; Polyethylene; Pharmaceutical Preparations
PubMed: 38141976
DOI: 10.1016/j.scitotenv.2023.169467 -
International Journal of Molecular... Jan 2024Poly(vinyl alcohol) is one of the most attractive polymers with a wide range of uses because of its water solubility, biocompatibility, low toxicity, good mechanical... (Review)
Review
Poly(vinyl alcohol) is one of the most attractive polymers with a wide range of uses because of its water solubility, biocompatibility, low toxicity, good mechanical properties, and relatively low cost. This review article focuses on recent advances in poly(vinyl alcohol) electrospinning and summarizes parameters of the process (voltage, distance, flow rate, and collector), solution (molecular weight and concentration), and ambient (humidity and temperature) in order to comprehend the influence on the structural, mechanical, and chemical properties of poly(vinyl alcohol)-based electrospun matrices. The importance of poly(vinyl alcohol) electrospinning in biomedical applications is emphasized by exploring a literature review on biomedical applications including wound dressings, drug delivery, tissue engineering, and biosensors. The study also highlights a new promising area of particles formation through the electrospraying of poly(vinyl alcohol). The limitations and advantages of working with different poly(vinyl alcohol) matrices are reviewed, and some recommendations for the future are made to advance this field of study.
Topics: Nanofibers; Polyvinyl Alcohol; Polymers; Tissue Engineering; Solubility
PubMed: 38338946
DOI: 10.3390/ijms25031668 -
International Journal of Biological... Dec 2023Membrane separation is considered an effective approach to water purification. Nevertheless, membrane fouling dramatically decreases the separation efficiency and...
Super-wetting and self-cleaning polyvinyl alcohol/sodium alginate nanofiber membrane decorated with MIL-88A(Fe) for efficient oil/water emulsion separation and dye degradation.
Membrane separation is considered an effective approach to water purification. Nevertheless, membrane fouling dramatically decreases the separation efficiency and lifetime of membranes, thus limiting its further development and application. Herein, a multifunctional self-cleaning MIL-88A(Fe) decorated polyvinyl alcohol/sodium alginate (MIL-88A(Fe)@PVA-SA) nanofiber membrane was prepared by electrospinning and in-situ growth methods for the separation of oil/water emulsions and photo-Fenton degradation of dyes. The membrane possesses superhydrophilicity with a water contact angle (WCA) of 0° and superoleophobicity with underwater oil contact angle (UCA) of 161.7°, and exhibits superior separation efficiency (>99.5 %) and permeation flux (1140-2455 L/m/h) for different oil/water emulsions. Moreover, the membrane exhibited an outstanding photo-Fenton performance under visible light, with degradation efficiencies (~99.9 %) towards methylene blue (MB) and reactive red 24 (RR24) within 90 min. Importantly, the membrane can be easily regenerated by simple rinsing and photo-Fenton self-cleaning treatment. In this study, MIL-88A(Fe)@PVA-SA nanofiber membrane has a promising application in dye removal and oil/water separation, providing a new idea to develop novel membrane materials.
Topics: Emulsions; Nanofibers; Polyvinyl Alcohol; Alginates; Coloring Agents
PubMed: 37804898
DOI: 10.1016/j.ijbiomac.2023.127205 -
Carbohydrate Polymers Jul 2023In this study, we developed a new filtering bioaerogel based on linear polyvinyl alcohol (PVA) and the cationic derivative of chitosan (N-[(2-hydroxy-3-trimethylamine)...
In this study, we developed a new filtering bioaerogel based on linear polyvinyl alcohol (PVA) and the cationic derivative of chitosan (N-[(2-hydroxy-3-trimethylamine) propyl] chitosan chloride, HTCC) with a potential antiviral application. A strong intermolecular network architecture was formed thanks to the introduction of linear PVA chains, which can efficiently interpenetrate the glutaraldehyde(GA)-crosslinked HTCC chains. The morphology of the obtained structures was examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The aerogels and modified polymers' elemental composition (including the chemical environment) was determined using X-ray photoelectron spectroscopy (XPS). New aerogels with more than twice as much developed micro- and mesopore space and BET-specific surface area were obtained concerning the starting sample chitosan aerogel crosslinked by glutaraldehyde (Chit/GA). The results obtained from the XPS analysis showed the presence of cationic 3-trimethylammonium groups on the surface of the aerogel, which can interact with viral capsid proteins. No cytotoxic effect of HTCC/GA/PVA aerogel was also observed on fibroblast cells of the NIH3T3 line. Furthermore, the HTCC/GA/PVA aerogel has been shown that efficiently traps mouse hepatitis virus (MHV) from suspension. The presented concept of aerogel filters for virus capture based on modified chitosan and polyvinyl alcohol has a high application potential.
Topics: Animals; Mice; Chitosan; Polyvinyl Alcohol; Glutaral; NIH 3T3 Cells; Viruses
PubMed: 37059523
DOI: 10.1016/j.carbpol.2023.120756 -
Chemosphere Oct 2023In recent years, production of cellulose nanofiber (CNF) from waste materials has achieved great interest owing to their renewable nature, biodegradability, high...
In recent years, production of cellulose nanofiber (CNF) from waste materials has achieved great interest owing to their renewable nature, biodegradability, high mechanical properties, economic value, and low density. Because Polyvinyl alcohol (PVA) is a synthetic biopolymer with good water solubility and biocompatibility, the composite material formed of CNF and PVA, is a sustainable way of monetizing to address environmental and economic issues. In this work pure PVA, PVA/CNF0.5, PVA/CNF1.0, PVA/CNF1.5, and PVA/CNF2.0 nanocomposite films were produced using the solvent casting approach with the addition of 0, 0.5, 1.0, 1.5, and 2.0 wt% of CNF concentrations respectively. The strongest water absorption behaviour was found as 25.82% for pure PVA membrane, followed by PVA/CNF0.5 (20.71%), PVA/CNF1.0 (10.26%), PVA/CNF1.5 (9.63%), and PVA/CNF2.0 (4.35%). The water contact angle of 53.1°, 47.8°, 43.4°, 37.7°, and 32.3° was formed between water droplet and the solid-liquid interface of pure PVA, PVA/CNF0.5, PVA/CNF1.0, PVA/CNF1.5, PVA/CNF2.0 composite films respectively. The SEM image clearly shows that a network structure like a tree form at the PVA/CNF0.5 composite film, where the sizes and number of pores are apparent. XRD analysis suggested that unique peaks found at 2θ = 17.5°, 28.1°, 33.4°, and 38° for nanocomposites indicating new crystal plane generated upon cross-linking in presence of malic acid. The maximum loss rate temperature (T) for PVA/CNF0.5, PVA/CNF1.0, PVA/CNF1.5 was determined by TG analysis to be around 273.4 °C. FTIR studies suggested that PVA/CNF0.5 composite film showed the highest peak at 1428 cm as compared to other PVA/CNF composite films representing the presence of higher crystalline band in the composite film matrix. PVA/CNF0.5 composite film was found to have a surface porosity and mean pore size of 27.35% and 0.19 μm respectively, classifying it in the MF membrane category. The maximum tensile strength (TS) of 5.27 MPa was found for PVA/CNF0.5, followed by PVA/CNF1.0, PVA/CNF1.5, pure PVA, and PVA/CNF2.0. The maximum young's modulus (111 MPa) was found for PVA/CNF1.0, followed by PVA/CNF0.5, PVA/CNF2.0, PVA/CNF1.5, and pure PVA, which could be attributed to the cyclization of the molecular structures by cross-linking. PVA/CNF0.5 exhibits greater elongation at break (21.7) than the other polymers, indicating a material's ability to undergo significant deformation before failure. Performance evaluation of the PVA/CNF0.5 composite film showed that 46.3% and 92.8% yield were found in the retentate for 200 mg/L of BSA, and 5 × 10 CFU/mL respectively. However, more than 90% E. coli was retained by PVA/CNF0.5 composite film, therefore absolute rating of this membrane is 0.22 μm. The size of this composite film may be therefore considered in the range of MF.
Topics: Poaceae; Polyvinyl Alcohol; Cellulose; Nanofibers; Escherichia coli; Water
PubMed: 37402426
DOI: 10.1016/j.chemosphere.2023.139370 -
Nanotechnology Aug 2023Green energy from the surrounding environment has great potential for reducing environmental pollution and sustainable development. Triboelectric nanogenerators (TENGs)...
Green energy from the surrounding environment has great potential for reducing environmental pollution and sustainable development. Triboelectric nanogenerators (TENGs) are of great interest as they can easily harvest mechanical energy from the environment. Here, we present a triboelectric nanogenerator (RS-TENG) based on rape straw (RS), which was developed from a film composed of waste RS and polyvinyl alcohol (PVA). Due to the high content of carbonyl, hydroxyl and amino acid functional groups in RS, the ability of RS/PVA to lose electrons is increased. The proposed RS-TENG device with a size of 6.25 cmexhibits open circuit voltage (78 V), short circuit current (5.3A) performance under uniform external stress at a frequency of 3.5 Hz and 10 N in the cylinder motor. 104.5W was obtained with a load resistance of 25 MΩ. Results obtained from degradability tests revealed that the RS/PVA film was able to degrade over a period of 30 d (In PBS solution). The RS-TENG produces a significantly high current signal under conditions of finger bending, elbow movements, and foot tapping. Practical tests of the RS-TENG have shown that it is a promising sensing device that will be widely used in the future.
Topics: Humans; Powders; Electrons; Hydroxyl Radical; Movement; Polyvinyl Alcohol
PubMed: 37557098
DOI: 10.1088/1361-6528/acee86 -
Waste Management (New York, N.Y.) Feb 2024This review investigates the latest trends in separation technologies regarding hard-to-recycle thin cables, specifically in the form of end-of-life wire harnesses... (Review)
Review
This review investigates the latest trends in separation technologies regarding hard-to-recycle thin cables, specifically in the form of end-of-life wire harnesses (WHs). The cables in WHs mainly contain copper (Cu) and poly(vinyl chloride) (PVC), which is commonly used to insulate and sheath cables. This review reveals that most separation technologies prioritize the recovery of Cu and overlook that of PVC. The recovery of high-purity PVC is very important because of its incompatibility with other plastics or Cu during recycling treatments. Through this investigation, we confirm that physical treatments, such as stripping and chopping, are insufficient to recover high-purity PVC from thin cables. Instead, a combination of chemical (e.g., swelling of PVC insulation or sheathing of cables under a suitable solvent) and physical (e.g., ball or rod milling and mechanical agitation of swollen cables) treatments can be used to achieve the recovery of high-purity PVC and Cu both for recycling. We believe that recovering metals and plastics from end-of-life cables is vital for sustainable waste management, offering several environmental and economic benefits.
Topics: Copper; Polyvinyl Chloride; Recycling; Waste Management; Plastics
PubMed: 38103350
DOI: 10.1016/j.wasman.2023.12.012 -
International Journal of Biological... Apr 2024Bioceramics are widely used in bone tissue engineering, yet the inherent high brittleness and low ductility of the ceramics lead to poor machinability, which restricts...
Bioceramics are widely used in bone tissue engineering, yet the inherent high brittleness and low ductility of the ceramics lead to poor machinability, which restricts their clinical applications. Here, a flexible and processable 3D printed bioceramic scaffold with high ceramic content (66.7 %) and shape fidelity (volume shrinkage rate < 5 %) was developed by freeze-thaw cycles, which was assisted by polyvinyl alcohol (PVA) and silk fibroin (SF). The hydrogen bonding between PVA imparted printability to the ceramic ink and enabled the subsequent formation of flexible scaffolds, which can be twisted, bend and cut to match bone defects. After adding SF, the printability of the inks and hydrophilicity of the scaffolds were enhanced, owing to the interactions between PVA and SF. Further, combined with the formation of β-sheet in SF, the scaffolds exhibited superior mechanical strength and excellent thermal stability, and can fully recover at 35 % compressive strain, which was breaking through the brittleness bottleneck of conventional ceramic scaffolds. Moreover, in vitro experiments showed excellent mineralization ability, osteogenic and angiogenic activities of the scaffolds, demonstrating its potential in bone regeneration. This initial study offers a promising personalized material for bone repair that can be used rapidly during surgery.
Topics: Tissue Scaffolds; Bone and Bones; Osteogenesis; Tissue Engineering; Fibroins; Polyvinyl Alcohol; Printing, Three-Dimensional
PubMed: 38492698
DOI: 10.1016/j.ijbiomac.2024.130919