-
Dental Materials : Official Publication... Mar 2024Nonthermal atmospheric or low-pressure plasma (NTP) can improve the surface characteristics of dental materials without affecting their bulk properties. This study aimed... (Review)
Review
OBJECTIVES
Nonthermal atmospheric or low-pressure plasma (NTP) can improve the surface characteristics of dental materials without affecting their bulk properties. This study aimed to systematically review the available scientific evidence on the effectiveness of using NTP for the surface treatment of etchable, silica-based dental ceramics before cementation, and elucidate its potential to replace the hazardous and technically demanding protocol of hydrofluoric acid (HF) etching.
METHODS
A valid search query was developed with the help of PubMed's Medical Subject Headings (MeSH) vocabulary thesaurus and translated to three electronic databases: PubMed, Web of Science, and Scopus. The methodological quality of the studies was assessed according to an adapted version of the Methodological Index for Non-Randomized Studies (MINORS).
RESULTS
Thirteen in vitro study reports published between 2008 and 2023 were selected for the qualitative and quantitative data synthesis. The implemented methodologies were diverse, comprising 19 different plasma treatment protocols with various device settings. Argon, helium, oxygen, or atmospheric air plasma may significantly increase the wettability and roughness of silicate ceramics by plasma cleaning, etching, and activation, but the treatment generally results in inferior bond strength values after cementation compared to those achieved with HF etching. The technically demanding protocol of plasma-enhanced chemical vapor deposition was employed more commonly, in which the surface deposition of hexamethyl disiloxane with subsequent oxygen plasma activation proved the most promising, yielding bond strengths comparable to those of the positive control. Lack of power analysis, missing adequate control, absence of examiner blinding, and non-performance of specimen aging were common methodological frailties that contributed most to the increase in bias risk (mean MINORS score 15.3 ± 1.1).
SIGNIFICANCE
NTP can potentially improve the adhesive surface characteristics of dental silicate ceramics in laboratory conditions, but the conventional protocol of HF etching still performs better in terms of the resin-ceramic bond strength and longevity. More preclinical research is needed to determine the optimal NTP treatment settings and assess the aging of plasma-treated ceramic surfaces in atmospheric conditions.
Topics: Dental Porcelain; Dental Bonding; Surface Properties; Resin Cements; Ceramics; Silicates; Oxygen; Materials Testing; Hydrofluoric Acid; Silanes
PubMed: 38281846
DOI: 10.1016/j.dental.2024.01.001 -
The Saudi Dental Journal Feb 2024Tricalcium silicate-based cements exhibit several beneficial properties for dental health and biocompatibility, which can induce biomineralisation. (Review)
Review
INTRODUCTION
Tricalcium silicate-based cements exhibit several beneficial properties for dental health and biocompatibility, which can induce biomineralisation.
OBJECTIVES
To assess the sealing ability and intratubular penetration of tricalcium silicate-based sealers using warm and cold obturation techniques.
MATERIALS AND METHODS
An electronic search was conducted in PubMed, Scopus, and Web of Science databases for endodontically treated teeth with bioceramics and their sealing capacity in root canal obturation published up to February 2023.
RESULTS
Of the 90 articles, 16 met the inclusion criteria, and only 10 were used for the -analysis, of which four addressed intratubular penetration, four addressed sealing capacity, and two addressed both variables. In the sealing capacity group, the -analysis concluded a standardised mean difference (SMD) of -1.31 in favour of the test group (warm) with a certain nonsignificant trend (p = 0.081); regarding intratubular penetration, the -analysis concluded an SMD = 2.34 in favour of the test group (warm) with significantly greater penetration (p = 0.032).
CONCLUSION
The warm obturation technique introduced significantly greater intratubular penetration than the cold technique, along with a remarkably superior sealing capacity compared to the cold technique, approaching statistical significance.
PubMed: 38419984
DOI: 10.1016/j.sdentj.2023.10.015 -
Journal of Conservative Dentistry and... Feb 2024The aim of this study was to systematically compare the bond strength of self-adhesive and self-etch or total-etch resin cement to zirconia. The PubMed, ISI (all), and... (Review)
Review
The aim of this study was to systematically compare the bond strength of self-adhesive and self-etch or total-etch resin cement to zirconia. The PubMed, ISI (all), and Scopus databases were searched for the selected keywords up to November 1, 2021, without date or language restrictions. In vitro studies comparing the bond strength of self-adhesive and self-etch or total-etch resin cement to zirconia were eligible for inclusion in the study. The selected articles were divided into four groups based on the type of resin cement and the storage time. Statistical analysis was performed using the Biostat Comprehensive Meta-Analysis Software version 2 ( = 0.05). The effect of conventional cement ( Glass Ionomer (GI), Resin Modified Glass Ionomer (RMGI) and zinc phosphate) was analyzed using descriptive analysis. The initial search yielded 376 articles, of which 26 were selected after a methodological assessment. Two reviewers independently extracted data and assessed the risk of bias. The results showed that the immediate or delay bond strength of the self-adhesive resin cement to zirconia has no significant difference with the bond strength of self-etch resin cement to zirconia. The immediate and delay bond strength of total-etch cement-zirconia was significantly lower than that of self-adhesive cement-zirconia ( = 0.00). A descriptive analysis of the selected articles showed that the bond strength of self-adhesive resin cement to zirconia was significantly higher than total-etch cement. The results of the meta-analysis showed that both self-adhesive and self-etch resin cement (if applied according to their manufacturer's instruction) are suitable for bonding to zirconia.
PubMed: 38463466
DOI: 10.4103/JCDE.JCDE_225_23 -
Clinical and Experimental Dental... Dec 2023The aim of this study was to review the selection criteria of resin cements for different types of partial coverage restorations (PCRs) and investigate if the type of... (Review)
Review
OBJECTIVE
The aim of this study was to review the selection criteria of resin cements for different types of partial coverage restorations (PCRs) and investigate if the type of restorations or restorative materials affect the type of selected resin cement.
MATERIALS AND METHODS
An electronic search (1991-2023) was performed in PubMed, Medline, Scopus, and Google Scholar databases by combinations of related keywords.
RESULTS
A total of 68 articles were included to review the selection criteria based on the advantages, disadvantages, indications, and performance of resin cements for different types of PCRs.
CONCLUSIONS
The survival and success of PCRs are largely affected by appropriate cement selection. Self-curing and dual-curing resin cements have been recommended for the cementation of metallic PCRs. The PCRs fabricated from thin, translucent, and low-strength ceramics could be adhesively bonded by light-cure conventional resin cements. Self-etching and self-adhesive cements, especially dual-cure types, are not generally indicated for laminate veneers.
Topics: Resin Cements; Ceramics; Dental Cements; Cementation
PubMed: 37427500
DOI: 10.1002/cre2.761 -
BMC Oral Health Dec 2023The goal behind this study is to answer the question "In tooth-supported fixed partial dentures (FPDs), does the digital impression techniques compared to fabrications... (Meta-Analysis)
Meta-Analysis
PURPOSE OF THE STUDY
The goal behind this study is to answer the question "In tooth-supported fixed partial dentures (FPDs), does the digital impression techniques compared to fabrications using conventional impression methods improve the marginal and internal fit?
BACKGROUND
The incorporation of digital technology in the fabrication of fixed partial dentures (FPDs) has accelerated over the past decade. This study is directed at evaluating the marginal and internal fit of FPDs manufactured using digital approaches compared to conventional techniques. The need for updated data has encouraged this review.
MATERIALS AND METHODS
An electronic search was conducted in PubMed, Scopus, Web of Science, and the Grey Database to identify relevant studies. The Modified Methodological Index for Non-Randomized Studies (MINORS) was used to assess the risk of bias in in vitro experiments. The key results of this meta-analysis were the standard mean differences (SMDs) and 95% confidence intervals (CI) of each main variance, marginal fit, and internal fit between the digital and conventional techniques. Additional analyses were performed to assess the significance of three subgroup parameters: method of digitalization, cement spacer thickness, and span length, and their influence on the fit of the FPDs.
RESULTS
Based on predefined criteria, of the seven articles included in this systematic review, only five were selected for the quantitative data analysis. The marginal fit results were (P = 0.06; SMD: -1.88; 95% CI: - 3.88, 0.11) (P > 0.05) and the internal fit results were (P = 0.02; SMD: -0.80; 95% CI: - 1.49, - 0.10) (P < 0.05). Regarding the subgroup analyses, the method of digitalization subgroup results were (P = 0.35; SMD: -1.89; 95% CI: - 3.89, 0.11) and (P = 0.80; SMD: -0.80; 95% CI: - 1.49, - 0.11) for marginal and internal fit, respectively. The span length results were (P = 0.10; SMD: -1.89; 95% CI: - 3.89, 0.11) for marginal fit and (P = 0.02; SMD: -0.80; 95% CI: - 1.49, - 0.11) for internal fit. The cement spacer thickness (P = 0.01; SMD: -1.89; 95% CI: - 3.89, 0.11) and (P = 0.04; SMD: -0.80; 95% CI: - 1.49, - 0.11) for marginal and internal fit, respectively.
CONCLUSION
Tooth-retained fixed partial dentures FPDs produced by digital scanning and computer-aided design/computer-aided manufacturing (CAD/CAM) systems can significantly enhance the internal fit compared with those manufactured by traditional methods. Intraoral scanners can replace conventional impressions for the fabrication of FPDs because they minimize the operating time and reduce patient pain. Further clinical studies are required to obtain more conclusive results.
SYSTEMATIC REVIEW REGISTRATION
This systematic review and meta-analysis was registered in the International Prospective Register of Systematic Reviews (PROSPERO), registration number CRD42021261397.
Topics: Humans; Dental Marginal Adaptation; Denture, Partial, Fixed; Computer-Aided Design; Research Design; Dental Prosthesis Design
PubMed: 38049754
DOI: 10.1186/s12903-023-03628-1 -
Journal of Indian Prosthodontic Society Jan 2024The purpose of this study was to evaluate the difference in marginal bone level, technical and biological complications between screw-retained and cemented all-ceramic... (Meta-Analysis)
Meta-Analysis
Evaluation of marginal bone level, technical and biological complications between screw-retained and cement-retained all-ceramic implant-supported crowns on zirconia abutment: A systematic review and meta-analysis.
PURPOSE
The purpose of this study was to evaluate the difference in marginal bone level, technical and biological complications between screw-retained and cemented all-ceramic implant-supported crowns fabricated on zirconia abutment at different follow-up periods.
MATERIALS AND METHODS
Independent search was conducted in Cochrane Library, EBSCO, and PubMed/PubMed Central/MEDLINE databases and the Google Scholar search engine for prospective studies and randomized controlled trials published between January 2014 and June 2023 evaluating the marginal bone level, technical and biological complications between screw-retained and cemented all-ceramic implant-supported crowns fabricated on zirconia abutment. Meta-analysis was conducted to assess the quantitative data on the marginal bone level and biological complications.
RESULTS
A total of eight studies were included for qualitative synthesis and six studies for quantitative synthesis. For marginal bone level, no statistically significant difference was observed (P = 0.83 and P = 0.69, respectively) during the follow-up period of 3 years and 5 years. For probing depth, the cemented group showed more amount of probing depth than the screw-retained group at a follow-up period of 3 years (P < 0.05) whereas no statistically significant difference was observed at a follow-up period of 5 years (P = 0.73). For bleeding on probing, the cemented group showed more probing depth than the screw-retained group at a follow-up period of 5 years (P = 0.10).
CONCLUSION
The evidence suggests that the screw-retained group showed no statistically significant difference in marginal bone level, comparatively fewer biological complications, and relatively higher technical complications than the cemented group at different follow-up periods.
Topics: Prospective Studies; Dental Implants; Dental Cements; Glass Ionomer Cements; Bone Cements; Bone Screws; Ceramics; Crowns; Zirconium
PubMed: 38263555
DOI: 10.4103/jips.jips_524_23 -
The Journal of Prosthetic Dentistry Jun 2024Computer-aided design and computer-aided manufacturing (CAD-CAM) blocks have evolved rapidly, making it difficult to establish the best clinical protocol for bonding a... (Meta-Analysis)
Meta-Analysis Review
STATEMENT OF PROBLEM
Computer-aided design and computer-aided manufacturing (CAD-CAM) blocks have evolved rapidly, making it difficult to establish the best clinical protocol for bonding a given block and whether an established protocol is appropriate for a newly introduced product.
PURPOSE
This integrative systematic review and meta-analysis aimed to clarify whether the clinician can select the most efficient adhesion protocols for CAD-CAM blocks by reading published in vitro studies and implementing them in daily practice.
MATERIAL AND METHODS
Based on the population, intervention, comparison, and outcome (PICO) strategy, 3 databases were searched for in vitro studies, randomized clinical trials, prospective or retrospective studies, and case reports from January 1, 2015, to July 31, 2021. A meta-analysis analyzed 28 studies to calculate the mean difference between best and worst protocols for each author and block with a random-effects model (α=.05).
RESULTS
From 508 relevant studies, 37 in vitro studies, 2 clinical studies, and 1 clinical report were selected for data extraction and qualitative analysis. Vita Enamic, IPS e.max CAD, LAVA Ultimate, and Vita Mark II blocks were the most studied, and RelyX Ultimate was the most used luting cement. The meta-analysis confirmed the null hypothesis that the evidence-based efficacy of clinical protocols to bond CAD-CAM blocks is still controversial (P<.05).
CONCLUSIONS
There are objective standards for individual in vitro tests, but the studies lack standardization. Some tested protocols were more efficient than others. Randomized clinical trials and well-documented clinical situations were almost nonexistent, making direct application of in vitro findings in clinical practice impossible.
Topics: Computer-Aided Design; Humans; Dental Bonding; Clinical Protocols; Dental Porcelain; In Vitro Techniques; Ceramics
PubMed: 36543700
DOI: 10.1016/j.prosdent.2022.08.024 -
Dental Materials Journal Jan 2024This systematic review investigates the effectiveness of calcium and phosphate ions release on the bioactivity and remineralization potential of glass ionomer cement...
This systematic review investigates the effectiveness of calcium and phosphate ions release on the bioactivity and remineralization potential of glass ionomer cement (GIC). Electronic databases, including PubMed-MEDLINE, Scopus, and Web of Science, were systematically searched according to PRISMA guidelines. This review was registered in the PROSPERO database. Five eligible studies on modifying GIC with calcium and phosphate ions were included. The risk of bias was assessed using the RoBDEMAT tool. The incorporation of these ions into GIC enhanced its bioactivity and remineralization properties. It promoted hydroxyapatite formation, which is crucial for remineralization, increased pH and inhibited cariogenic bacteria growth. This finding has implications for the development of more effective dental materials. This can contribute to improved oral health outcomes and the management of dental caries, addressing a prevalent and costly oral health issue. Nevertheless, comprehensive longitudinal investigations are needed to evaluate the clinical efficacy of this GIC's modification.
Topics: Humans; Glass Ionomer Cements; Calcium; Dental Caries; Phosphates
PubMed: 38220163
DOI: 10.4012/dmj.2023-132 -
Journal of Dentistry May 2024The purpose of this systematic review was to investigate how different interventions can impact the bond strength of additively manufactured crown materials after... (Review)
Review
OBJECTIVE
The purpose of this systematic review was to investigate how different interventions can impact the bond strength of additively manufactured crown materials after cementation.
DATA/SOURCES
Four online databases Ovid MEDLINE, Scopus, Web of Science and Google Scholar were searched up to January 2023. Inclusion criteria were English-language publications, full-text, and in vitro studies only. Exclusion criteria were studies that did not assess the bonding of an additively manufactured crown material to cement or did not conduct any bond strength tests. An assessment of risk of bias was done in accordance with a modified Consolidated Standards of Reporting Trials (CONSORT) checklist. Each study was analysed and compared based on the interventions and bond strength results.
STUDY SELECTION
Six studies satisfied the inclusion and exclusion criteria, five of which evaluated photopolymerised resin and one that tested zirconia manufacturing via 3D printing. All studies observed a low risk of bias. The interventions applied included the type of surface pretreatments, airborne-particle abrasion pressure, cement type, taper of crown, and artificial aging. Three studies compared the bonding performance to milled materials.
CONCLUSIONS
The bond strength of crown materials additively manufactured from photopolymers presented high values and are comparable to milled materials. The systematic review demonstrated there was no definite superior cement type, but airborne-particle abrasion with alumina was generally recommended. There is a clear gap in the literature regarding the bond strength of additively manufactured crowns. Therefore, further research is necessary to evaluate its clinical applicability for permanent restorations.
CLINICAL SIGNIFICANCE
Factors influencing the bond strength of additively manufactured crown materials should be evaluated so dental professionals can adopt procedures that promote the strongest bond.
Topics: Crowns; Dental Bonding; Humans; Dental Materials; Materials Testing; Dental Cements; Zirconium; Surface Properties; Cementation; Printing, Three-Dimensional; Dental Stress Analysis; In Vitro Techniques
PubMed: 38432351
DOI: 10.1016/j.jdent.2024.104908 -
Brazilian Dental Journal 2023The purpose of this article was to Evaluate the influence of sealer on the outcome of non-surgical endodontic treatment or retreatment of permanent teeth with apical...
BACKGROUND
The purpose of this article was to Evaluate the influence of sealer on the outcome of non-surgical endodontic treatment or retreatment of permanent teeth with apical periodontitis (PROSPERO registration: CRD42020205951).
METHODOLOGY
A systematic review of original clinical studies was carried out following PRISMA guidelines to answer whether the type of sealer used in endodontic treatment or retreatment influences the repair of apical periodontitis determined by clinical and radiographic parameters. Electronic searches were performed in PubMed, Embase, Web of Science, Scopus, and the Cochrane Library database, until May 2023. Gray literature and a hand search of reference lists were also performed. The risk of bias was assessed using Cochrane RoB2 for randomized trials and the Newcastle-Ottawa Scale (NOS) for prospective and retrospective cohort and case-control studies.
RESULTS
Among 1046 studies, a total of 819 were selected by title and abstract, resulting in 23 for full-text review. In total, 11 studies met the inclusion criteria (1467 patients/teeth with apical periodontitis). The quality assessment using RoB2 included five randomized control trials, of which four had medium risk and one had a low risk of bias. According to the NOS scale, five studies were classified as low risk and one study was considered as medium risk of bias. The sealer type and obturation techniques varied, and the mean follow-up time was 3.7 years. Most studies used two-dimensional radiographic criteria to assess the treatment outcome sealers and not cements. Eight studies did not find significant differences when comparing cements. The healing rates ranged from 56.7% to 90%.
CONCLUSIONS
The results of this review support that the current endodontic sealers do not seem to influence the treatment outcome of permanent teeth with apical periodontitis. Although the studies had medium and low risk of bias, the results should be interpreted with caution. More randomized studies of long-term outcomes comparing filling materials are needed to strengthen this claim and allow for a meta-analysis.
Topics: Humans; Case-Control Studies; Periapical Periodontitis; Prospective Studies; Retrospective Studies; Treatment Outcome
PubMed: 38133464
DOI: 10.1590/0103-6440202305471