-
Clinical Oral Investigations Sep 2023This study evaluated the dimensional and positional osseous temporomandibular joint features in normodivergent facial patterns with and without temporomandibular...
OBJECTIVE
This study evaluated the dimensional and positional osseous temporomandibular joint features in normodivergent facial patterns with and without temporomandibular disorders.
METHODS
A total of 165 adult patients were divided into two groups: group 1 (n = 79 patients; 158 joints): temporomandibular disorders patients and group 2 (n = 86 patients; 172 joints): non-temporomandibular disorders patients. Three-dimensional positional and dimensional temporomandibular joint characteristics, including glenoid fossa, mandibular condyles, and joint spaces, were assessed by cone beam computed tomography.
RESULTS
The glenoid fossa positions in the three orthogonal planes and height showed statistical significance between the two studied groups. The temporomandibular disorders patients showed higher horizontal and vertical condyle inclinations while anteroposterior inclination was less, and the condyle was positioned more superior, anterior, and lateral in the glenoid fossa. The condyle width and length showed no significance between the two groups, while condyle height was smaller in temporomandibular disorders patients. Anterior and medial joint spaces increased while the superior and posterior joint spaces reduced in temporomandibular disorders patients.
CONCLUSION
There were significant differences between the patients with and without temporomandibular joint disorders in terms of mandibular fossa positions and height as well as condylar positions and inclinations in horizontal and vertical planes together with reduced condylar height and reduced posterior and superior joint spaces in the temporomandibular disorders patients.
CLINICAL RELEVANCE
The temporomandibular disorder is a multifactorial disorder in which one of these factors is the dimensional and positional characteristics of the temporomandibular joints; including or excluding this factor requires a comprehensive three-dimensional investigation of patients with TMD compared to the normal group under the condition that the facial pattern is average as a confounding factor.
Topics: Adult; Humans; Temporomandibular Joint; Temporomandibular Joint Disorders; Mandibular Condyle; Face; Cone-Beam Computed Tomography
PubMed: 37358688
DOI: 10.1007/s00784-023-05120-0 -
Cureus Dec 2023Osteochondromas (OCs) are benign bone tumors characterized by their growth with a cartilage cap and typically occurring at the ends of long bones. Their occurrence in...
Osteochondromas (OCs) are benign bone tumors characterized by their growth with a cartilage cap and typically occurring at the ends of long bones. Their occurrence in the head and neck region is infrequent, accounting for only around 1% of head and neck tumors. Notably, the mandibular coronoid process and the mandibular condyle are the primary sites where an OC is reported. Patients often exhibit facial asymmetry, limited mouth opening, and malocclusion. Possible treatment options depending on the condition include partial or total condylectomy, vertical ramus osteotomy, and supplementary orthognathic surgery. The recurrence rate of under 1%- 2% is reported after local resection. In this case report, we present a unique case of an OC in a 27-year-old woman. It involved the mandibular condyle, resulting in a left-sided mouth deviation while opening and closing her mouth. The purpose of this article is to detail the clinical and radiographic features, histopathological aspects, and treatment strategies and differentiate potential diagnoses, for such OCs.
PubMed: 38213345
DOI: 10.7759/cureus.50355 -
Heliyon Jul 2023The present study aimed to predict the envelope surfaces from facial morphology. Condylar envelope surfaces for 34 healthy adults were formed and simplified as sagittal...
The present study aimed to predict the envelope surfaces from facial morphology. Condylar envelope surfaces for 34 healthy adults were formed and simplified as sagittal section curves. Cephalometric and maximum mandibular moving distances measurement were performed on the participants. There was no statistically significant difference (p = 0.763) between the left and right maximum lateral movements. There was a statistically significant difference in the mandibular body length between the sexes. The envelope surfaces were divided into type 1 with H ≥ 1/3 H and type 2 with H < 1/3 × H. SNA and SNB for type 2 were significantly greater than those for type 1 (p < 0.001). Therefore, the participants were divided into four groups based on gender and envelope surface morphology. The curves could be fitted using the second-order Fourier function (R-square ≥0.95). Six facial parameters were selected and a matrix was used to map facial morphology to the envelope surface. Individual sagittal curves were predicted using the matrix and facial parameters, and the envelope surface was predicted using the curve and the condyle model. Deviation analysis for the predicted envelope surface using the actual envelope as a reference was carried out (root mean square = 0.9970 mm ± 0.2918 mm). This method may lay a foundation for the geometric design of artificial fossa components of temporomandibular joint replacement systems. It may improve prosthesis design without flexible tissue repair and guide the movement of the artificial joint head.
PubMed: 37483714
DOI: 10.1016/j.heliyon.2023.e17769 -
Bioengineering (Basel, Switzerland) Aug 2023Maxillofacial skeletal surgery often involves the use of patient-specific implants. However, errors in obtaining patient data and designing and manufacturing...
Maxillofacial skeletal surgery often involves the use of patient-specific implants. However, errors in obtaining patient data and designing and manufacturing patient-specific plates and guides can occur even with accurate virtual surgery. To address these errors, bespoke Snowman plates were designed to allow movement of the mandible. This study aimed to compare the stability of bespoke four-hole miniplates with that of a bespoke Snowman plate for bilateral sagittal split ramus osteotomy (SSRO), and to present a method to investigate joint cavity changes, as well as superimpose virtual and actual surgical images of the mandible. This retrospective study included 22 patients who met the inclusion criteria and underwent orthognathic surgery at a university hospital between 2015 and 2018. Two groups were formed on the basis of the plates used: a control group with four-hole bespoke plates and a study group with bespoke Snowman plates. Stability was assessed by measuring the condyle-fossa space and superimposing three-dimensional virtual surgery images on postoperative cone-beam computed tomography (CBCT) scans. No significant differences were observed in the condyle-fossa space preoperatively and 1 year postoperatively between the control and study groups. Superimposing virtual surgery and CBCT scans revealed minimal differences in the landmark points, with no variation between groups or timepoints. The use of bespoke Snowman plates for stabilizing the mandible following SSRO exhibited clinical stability and reliability similar to those with bespoke four-hole plates. Additionally, a novel method was introduced to evaluate skeletal stability by separately analyzing the condyle-fossa gap changes and assessing the mandibular position.
PubMed: 37627799
DOI: 10.3390/bioengineering10080914 -
Beijing Da Xue Xue Bao. Yi Xue Ban =... Feb 2024To establish and assess the precision of pre-surgical condyle position planning using mandibular movement trajectory data for orthognathic surgery.
OBJECTIVE
To establish and assess the precision of pre-surgical condyle position planning using mandibular movement trajectory data for orthognathic surgery.
METHODS
Skull data from large-field cone beam computed tomography (CBCT) and dental oral scan data were imported into IVSPlan 1.0.25 software for 3D reconstruction and fusion, creating 3D models of the maxilla and mandible. Trajectory data of mandibular movement were collected using a mandibular motion recorder, and the data were integrated with the jaw models within the software. Subsequently, three-dimensional trajectories of the condyle were obtained through matrix transformations, rendering them visually accessible. A senior oral and maxillofacial surgeon with experience in both diagnosis and treatment of temporomandibular joint disease and orthognathic surgery selected the appropriate condyle position using the condyle movement trajectory interface. During surgical design, the mobile mandibular proximal segment was positioned accordingly. Routine orthognathic surgical planning was completed by determining the location of the mandibular distal segment, which was based on occlusal relationships with maxilla and facial aesthetics. A virtual mandible model was created by integrating data from the proximal and distal segment bone. Subsequently, a solid model was generated through rapid prototyping. The titanium plate was pre-shaped on the mandibular model, and the screw hole positions were determined to design a condylar positioning guide device. In accordance with the surgical plan, orthognathic surgery was performed, involving mandibular bilateral sagittal split ramus osteotomy (SSRO). The distal segment of the mandible was correctly aligned intermaxillary, while the proximal bone segment was positioned using the condylar positioning guide device and the pre-shaped titanium plate. The accuracy of this procedure was assessed in a study involving 10 patients with skeletal class Ⅱ malocclusion. Preoperative condyle location planning and intraoperative positioning were executed using the aforementioned techniques. CBCT data were collected both before the surgery and 2 weeks after the procedure, and the root mean square (RMS) distance between the preope-rative design position and the actual postoperative condyle position was analyzed.
RESULTS
The RMS of the condyle surface distance measured was (1.59±0.36) mm (95%: 1.35-1.70 mm). This value was found to be significantly less than 2 mm threshold recommended by the expert consensus ( < 0.05).
CONCLUSION
The mandibular trajectory may play a guiding role in determining the position of the mandibular proximal segment including the condyle in the orthognathic surgery. Through the use of a condylar positioning guide device and pre-shaped titanium plates, the condyle positioning can be personalized and customized with clinically acceptable accuracy.
Topics: Humans; Mandibular Condyle; Orthognathic Surgery; Titanium; Mandible; Orthognathic Surgical Procedures; Osteotomy, Sagittal Split Ramus
PubMed: 38318897
DOI: 10.19723/j.issn.1671-167X.2024.01.010 -
Heliyon Apr 2024There are multiple reconstructive options after mandibular resection and disarticulation of the condyle. The purpose of this study was to assess the clinical outcomes...
BACKGROUND
There are multiple reconstructive options after mandibular resection and disarticulation of the condyle. The purpose of this study was to assess the clinical outcomes and functionality of osteocutaneous free flaps in the reconstruction of mandibular defects that involve the Temporo-Mandibular Joint (TMJ).
METHODS
Our study is a retrospective cohort study involving subjects who underwent mandibular resection and needed TMJ reconstruction with vascularized bony-free flaps from February 2016 to June 2018. Data gathered included patient demographics, post-operative function, maximum interincisal opening (MIO), occlusion status, deviation on opening, and TMJ symptoms. Data points collected from postoperative CT imaging included the following: position of the flap in relation to the glenoid fossa and articular eminence, and closest point of contact.
RESULTS
Eight out of the nine patients who underwent free flap reconstruction of mandibular defects involving the TMJ qualified for the study. The mean age was 39.7 years old. In all 8 cases, virtual surgical planning (VSP) was used. The mean follow-up time was 18.75 months. The flap success rate was 100%. The mean MIO was 37.37 mm. Six patients resumed their premorbid diet, and one patient developed dysphagia and was peg tube dependent. In seven cases the occlusion was intact and reproducible, one case was without sufficient teeth for occlusion. On imaging, the mean distance from the neo-condyle to the glenoid fossa was 14 mm and to the articular eminence 8.68 mm. The point of closest contact in all cases appeared to be the articular eminence.
CONCLUSION
Vascularized Osteocutaneous-flaps such as FFFs and DCIA flaps provide a good option for the reconstruction of mandibular defects that involve the TMJ. Ipsilateral deviation on opening does not negatively affect clinical outcomes or function. Placing patients in Maxillomandibular fixation for 4-6 weeks may help to prevent condylar sag and provide stable post-operative occlusion.
PubMed: 38571615
DOI: 10.1016/j.heliyon.2024.e28201 -
Scientific Reports Oct 2023Class III malocclusion is a combination of dental and skeletal disorders that causes discrepancies in occlusion. Malocclusion can affect the structure of the...
Class III malocclusion is a combination of dental and skeletal disorders that causes discrepancies in occlusion. Malocclusion can affect the structure of the Temporomandibular joint (TMJ) resulting in many problems, one of which is affecting the internal structure of the bone. This study aimed to examine the morphological features of class III patients' trabecular structure of the mandibular condyle in comparison with normal class I individuals using fractal analysis (FA). To study the internal structure of the mandibular condyle bone, Computed Tomography (CT) scans of 45 severe class III patients (age: 16-46) who were the candidates for orthognathic surgery were selected and matched by age and sex with 45 normal class I individuals. The trabecular bone structure of the left and right mandibular condyles in three CT planes of the study group and control group were evaluated employing the FA. The result of the present study indicated that the fractal dimensions (FD) values of class III patients were lower than those of the normal class I individuals in axial (class I: 1.31 ± 0.02, class III: 1.28 ± 0.02), sagittal (class I: 1.25 ± 0.03, class III: 1.19 ± 0.08), and coronal (class I: 1.5 ± 0.06, class III: 1.45 ± 0.07) planes (P < 0.001). There were no significant differences between the FD values of the males and females. The intra-group evaluation revealed that there was no correlation between age and FD values. No evidence of laterality was found regarding the FD values of the right and left condyles. Given the noticeable differences between the FD values, it can be implied that severe class III malocclusion may affect the trabecular pattern of the cancellous bone of the mandibular condyle compared to class I individuals. Therefore, due to the altered trabecular structure, clinicians should be cautious when planning treatments for these patients.
Topics: Male; Female; Humans; Adolescent; Young Adult; Adult; Middle Aged; Mandibular Condyle; Fractals; Temporomandibular Joint; Tomography, X-Ray Computed; Malocclusion; Malocclusion, Angle Class III; Cone-Beam Computed Tomography
PubMed: 37875543
DOI: 10.1038/s41598-023-45407-6 -
Clinical Oral Investigations Jan 2024To evaluate the temporomandibular joint (TMJ), condylar and mandibular movements in obstructive sleep apnea (OSA) patients treated with mandibular advancement device...
OBJECTIVES
To evaluate the temporomandibular joint (TMJ), condylar and mandibular movements in obstructive sleep apnea (OSA) patients treated with mandibular advancement device (MAD) and to identify the influence of these anatomic factors on upper airway (UA) volume and polysomnographic outcomes after treatment.
MATERIALS AND METHODS
Twenty OSA patients were prospectively treated with MAD. Clinical examinations, cone-beam computed tomography, and polysomnography were performed before MAD treatment and after achieving therapeutic protrusion. Polysomnographic variables and three-dimensional measurements of the TMJ, mandible, and upper airway were statistically analyzed.
RESULTS
Condylar rotation, anterior translation, and anterior mandibular displacement were directly correlated with total UA volume, while vertical mandibular translation was inversely correlated with the volume of the inferior oropharynx. MAD treatment resulted in an increase in the volume and area of the superior oropharynx. There was no statistically significant correlation between condylar rotation and translation and polysomnographic variables. With MAD, there was a significant increase in vertical dimension, changes in condylar position (rotation and translation), and mandibular displacement. The central and medial lengths of the articular eminence were inversely correlated with condylar rotation and translation, respectively. The lateral length of the eminence was directly correlated with condylar translation, and the lateral height was directly correlated with condylar rotation and translation.
CONCLUSION
Condylar and mandibular movements influenced UA volume. The articular eminence played a role in the amount of condylar rotation and translation.
CLINICAL RELEVANCE
Individualized anatomical evaluation of the TMJ proves to be important in the therapy of OSA with MAD.
Topics: Humans; Occlusal Splints; Mandible; Sleep Apnea, Obstructive; Temporomandibular Joint; Cone-Beam Computed Tomography; Mandibular Advancement; Treatment Outcome
PubMed: 38286954
DOI: 10.1007/s00784-024-05513-9 -
Head & Face Medicine Aug 2023The aim of this study was to establish a sheep model of the Puricelli biconvex arthroplasty (ABiP) technique in sheep for evaluating its functional, biological and...
BACKGROUND
The aim of this study was to establish a sheep model of the Puricelli biconvex arthroplasty (ABiP) technique in sheep for evaluating its functional, biological and histological parameters.
METHODS
Ten Corriedale black sheep were submitted to TMJ total reconstruction with poly(methyl methacrylate) (PMMA) using ABiP and euthanized after 45 (n = 5) or 90 (n = 5) days. Control animals (n = 2) underwent sham operations and were euthanized after 45 days. Variables were assessed before the surgery (T0), immediately after (T1) and at 45 or 90 postoperative days (T2).
RESULTS
Histological analyses showed regression of inflammatory cells over the follow-up period. PMMA showed reduced porosity and roughness in the articular contact area. PMMA temporal components showed linear and volumetric wear in comparison to control, but no foreign body reaction was observed. The reconstructions were stable in all animals. The amplitude of mouth opening and left lateral movements were maintained, except for a reduction in the range of right lateral movements at day 90 in the experimental group. Clinical, macroscopic and radiographic observations showed that the reconstructions were stable.
CONCLUSIONS
The analysis of functional, biological and histological parameters in sheep submitted to ABiP showed stable results of the procedure, with maintenance of body weight and all mandibular movements, save contralateral mandibular movement, suggesting that joint function was completely maintained following the procedure. This experimental study provides support for clinical results previously reported of the ABiP technique in TMJ reconstruction procedures.
Topics: Animals; Temporomandibular Joint Disorders; Polymethyl Methacrylate; Tooth Ankylosis; Arthroplasty; Mandible; Temporomandibular Joint; Range of Motion, Articular; Mandibular Condyle
PubMed: 37528466
DOI: 10.1186/s13005-023-00379-w -
Journal of Oral Rehabilitation Sep 2023Fractures of the mandibular condyle are the most common jaw fractures. There are several treatment approaches. There is the non-surgical and surgical approach. The... (Review)
Review
Conservative treatment of temporomandibular joint condylar fractures: A systematic review conducted according to PRISMA guidelines and the Cochrane Handbook for Systematic Reviews of Interventions.
OBJECTIVE
Fractures of the mandibular condyle are the most common jaw fractures. There are several treatment approaches. There is the non-surgical and surgical approach. The purpose of this systematic literature review is to evaluate the indications and contraindications of either method to help the clinician make the best treatment choice.
METHODS
Pubmed, Web of Science and Lilacs were systematically searched until 20 May 2023. Clinical trials were selected to compare the two treatments for condyle fracture and evaluate indications and contraindications.
RESULTS
Out of 2515 papers, four studies were included. The surgical approach allows faster functional recovery and decreases patient discomfort. The study analyses under what circumstances a surgical procedure is more practical than a non-surgical one.
CONCLUSION
There is no evidence regarding the reliability of either method. Both have superimposable results. However, age, type of occlusion and other factors direct the clinician towards a surgical choice.
Topics: Humans; Treatment Outcome; Fracture Fixation, Internal; Conservative Treatment; Reproducibility of Results; Mandibular Fractures; Mandibular Condyle; Temporomandibular Joint Disorders; Temporomandibular Joint
PubMed: 37191365
DOI: 10.1111/joor.13497