-
ACS Omega Jul 2023With unique optical and chemical properties, carbon quantum dots (CQDs) find tremendous applications in chemistry, biology, and materials science to medicine. To expand...
With unique optical and chemical properties, carbon quantum dots (CQDs) find tremendous applications in chemistry, biology, and materials science to medicine. To expand the applicability of coal-derived CQDs from the liquid to solid state, we herein report the sustainable synthesis of solid phosphors from coal-derived CQDs using poly(vinyl alcohol) (PVA) and silica (SiO) as an organic and inorganic matrix. Two coal-derived CQDs were obtained using an eco-friendly ultrasonic-assisted wet oxidation method. The structural and chemical properties of the CQDs were extensively investigated and compared with commercial CQDs. The coal-derived CQDs exhibited blue fluorescence with 8.9 and 14.9% quantum yields. The CQDs were found to be self-co-doped with nitrogen and sulfur heteroatoms through surface and edge functional groups. Solid-state fluorescence of PVA/CQD composite films confirmed that the CQDs retained their excellent blue emission in a dry solid matrix. A facile one-pot sol-gel method was employed to fabricate SiO/CQD phosphors with the unique fluorescence emission. Due to their special structural features, coal-derived CQDs favored the heterogeneous nucleation and rapid formation of SiO/CQD phosphors. Further, coal-derived CQDs caused high-intensity white light emission with CIE coordinates of (0.312, 0.339) by endowing a suitable band gap structure in a SiO/CQD solid phosphor for potential optical applications.
PubMed: 37483255
DOI: 10.1021/acsomega.3c02884 -
Polymers Dec 2023Nanocomposites based on poly(lactic acid) (PLA) and magnetite nanoparticles (MNP-FeO) show promise for applications in biomedical treatments. One key challenge is to...
Nanocomposites based on poly(lactic acid) (PLA) and magnetite nanoparticles (MNP-FeO) show promise for applications in biomedical treatments. One key challenge is to improve the stabilization and dispersion of MNP-FeO. To address this, we synthesized MNP-FeO/PLA nanocomposites using ultrasound mediation and a single iron(II) precursor, eliminating the need for surfactants or organic solvents, and conducted the process under ambient conditions. The resulting materials, containing 18 and 33 wt.% FeO, exhibited unique thermal behavior characterized by two mass losses: one at a lower degradation temperature (T) and another at a higher T compared to pure PLA. This suggests that the interaction between PLA and MNP-FeO occurs through hydrogen bonds, enhancing the thermal stability of a portion of the polymer. Fourier Transform Infrared (FT-IR) analysis supported this finding, revealing shifts in bands related to the terminal -OH groups of the polymer and the Fe-O bonds, thereby confirming the interaction between the groups. Raman spectroscopy demonstrated that the PLA serves as a protective layer against the oxidation of MNP-FeO in the 18% MNP-FeO/PLA nanocomposite when exposed to a high-power laser (90 mW). Transmission Electron Microscopy (TEM) and Scanning Electron Microscopy (SEM) analyses confirmed that the synthetic procedure yields materials with dispersed nanoparticles within the PLA matrix without the need for additional reactants.
PubMed: 38139914
DOI: 10.3390/polym15244662 -
Mathematical Biosciences and... Nov 2023Motor imagery (MI) brain-computer interface (BCI) assist users in establishing direct communication between their brain and external devices by decoding the movement...
Motor imagery (MI) brain-computer interface (BCI) assist users in establishing direct communication between their brain and external devices by decoding the movement intention of human electroencephalogram (EEG) signals. However, cerebral cortical potentials are highly rhythmic and sub-band features, different experimental situations and subjects have different categories of semantic information in specific sample target spaces. Feature fusion can lead to more discriminative features, but simple fusion of features from different embedding spaces leading to the model global loss is not easily convergent and ignores the complementarity of features. Considering the similarity and category contribution of different sub-band features, we propose a multi-band centroid contrastive reconstruction fusion network (MB-CCRF). We obtain multi-band spatio-temporal features by frequency division, preserving the task-related rhythmic features of different EEG signals; use a multi-stream cross-layer connected convolutional network to perform a deep feature representation for each sub-band separately; propose a centroid contrastive reconstruction fusion module, which maps different sub-band and category features into the same shared embedding space by comparing with category prototypes, reconstructing the feature semantic structure to ensure that the global loss of the fused features converges more easily. Finally, we use a learning mechanism to model the similarity between channel features and use it as the weight of fused sub-band features, thus enhancing the more discriminative features, suppressing the useless features. The experimental accuracy is 79.96% in the BCI competition Ⅳ-Ⅱa dataset. Moreover, the classification effect of sub-band features of different subjects is verified by comparison tests, the category propensity of different sub-band features is verified by confusion matrix tests and the distribution in different classes of each sub-band feature and fused feature are showed by visual analysis, revealing the importance of different sub-band features for the EEG-based MI classification task.
Topics: Humans; Electroencephalography; Brain; Communication; Learning; Movement
PubMed: 38124568
DOI: 10.3934/mbe.2023912 -
Progress in Retinal and Eye Research Mar 2024There are many unanswered questions on the relation of intraocular pressure to glaucoma development and progression. IOP itself cannot be distilled to a single, unifying... (Review)
Review
There are many unanswered questions on the relation of intraocular pressure to glaucoma development and progression. IOP itself cannot be distilled to a single, unifying value, because IOP level varies over time, differs depending on ocular location, and can be affected by method of measurement. Ultimately, IOP level creates mechanical strain that affects axonal function at the optic nerve head which causes local extracellular matrix remodeling and retinal ganglion cell death - hallmarks of glaucoma and the cause of glaucomatous vision loss. Extracellular tissue strain at the ONH and lamina cribrosa is regionally variable and differs in magnitude and location between healthy and glaucomatous eyes. The ultimate targets of IOP-induced tissue strain in glaucoma are retinal ganglion cell axons at the optic nerve head and the cells that support axonal function (astrocytes, the neurovascular unit, microglia, and fibroblasts). These cells sense tissue strain through a series of signals that originate at the cell membrane and alter cytoskeletal organization, migration, differentiation, gene transcription, and proliferation. The proteins that translate mechanical stimuli into molecular signals act as band-pass filters - sensing some stimuli while ignoring others - and cellular responses to stimuli can differ based on cell type and differentiation state. Therefore, to fully understand the IOP signals that are relevant to glaucoma, it is necessary to understand the ultimate cellular targets of IOP-induced mechanical stimuli and their ability to sense, ignore, and translate these signals into cellular actions.
Topics: Humans; Optic Disk; Glaucoma; Intraocular Pressure; Axons; Retinal Ganglion Cells
PubMed: 38110030
DOI: 10.1016/j.preteyeres.2023.101232 -
Nature May 2024Compared to polycrystalline semiconductors, amorphous semiconductors offer inherent cost-effective, simple and uniform manufacturing. Traditional amorphous hydrogenated...
Compared to polycrystalline semiconductors, amorphous semiconductors offer inherent cost-effective, simple and uniform manufacturing. Traditional amorphous hydrogenated Si falls short in electrical properties, necessitating the exploration of new materials. The creation of high-mobility amorphous n-type metal oxides, such as a-InGaZnO (ref. ), and their integration into thin-film transistors (TFTs) have propelled advancements in modern large-area electronics and new-generation displays. However, finding comparable p-type counterparts poses notable challenges, impeding the progress of complementary metal-oxide-semiconductor technology and integrated circuits. Here we introduce a pioneering design strategy for amorphous p-type semiconductors, incorporating high-mobility tellurium within an amorphous tellurium suboxide matrix, and demonstrate its use in high-performance, stable p-channel TFTs and complementary circuits. Theoretical analysis unveils a delocalized valence band from tellurium 5p bands with shallow acceptor states, enabling excess hole doping and transport. Selenium alloying suppresses hole concentrations and facilitates the p-orbital connectivity, realizing high-performance p-channel TFTs with an average field-effect hole mobility of around 15 cm V s and on/off current ratios of 10-10, along with wafer-scale uniformity and long-term stabilities under bias stress and ambient ageing. This study represents a crucial stride towards establishing commercially viable amorphous p-channel TFT technology and complementary electronics in a low-cost and industry-compatible manner.
PubMed: 38599238
DOI: 10.1038/s41586-024-07360-w -
Oral Diseases Nov 2023Amelogenesis imperfecta (AI) is defined as inherited enamel malformations. LAMA3 (laminin alpha-3) encodes a critical protein component of the basement membrane...
OBJECTIVE
Amelogenesis imperfecta (AI) is defined as inherited enamel malformations. LAMA3 (laminin alpha-3) encodes a critical protein component of the basement membrane (laminin-332). Individuals carrying heterozygous LAMA3 mutations have previously been shown to have localized enamel defects. This study aimed to define clinical phenotypes and to discern the genetic etiology for four AI kindreds.
MATERIALS AND METHODS
Whole-exome analyses were conducted to search for sequence variants associated with the disorder, and micro-computed tomography (μCT) to characterize the enamel defects.
RESULTS
The predominant enamel phenotype was generalized thin enamel with defective pits and grooves. Horizonal bands of hypoplastic enamel with chalky-white discoloration and enamel hypomineralization were also observed and demonstrated by μCT analyses of affected teeth. Four disease-causing LAMA3 mutations (NM_198129.4:c.3712dup; c.5891dup; c.7367del; c.9400G > C) were identified. Compound heterozygous MMP20 mutations (NM_004771.4:c.539A > G; c.692C > T) were also found in one proband with more severe enamel defects, suggesting a mutational synergism on disease phenotypes. Further analyses of the AI-causing mutations suggested that both α3A (short) and α3B (long) isoforms of LAMA3 are essential for enamel formation.
CONCLUSIONS
Heterozygous LAMA3 mutations can cause generalized enamel defects (AI1A) with variable expressivity. Laminin-332 is critical not only for appositional growth but also enamel maturation.
Topics: Humans; Amelogenesis Imperfecta; Laminin; X-Ray Microtomography; Dental Enamel; Extracellular Matrix Proteins; Mutation; Phenotype; Biological Variation, Population; Pedigree
PubMed: 36326426
DOI: 10.1111/odi.14425 -
Membranes Jun 2023Flame-resistant polymer composites were prepared based on polyvinyl alcohol (PVA) as a polymer matrix and a polyphosphonate as flame retardant. Oxalic acid was used as...
Flame-resistant polymer composites were prepared based on polyvinyl alcohol (PVA) as a polymer matrix and a polyphosphonate as flame retardant. Oxalic acid was used as crosslinking agent. LiClO, BaTiO, and graphene oxide were also incorporated into PVA matrix to increase the ionic conductivity. The obtained film composites were investigated by infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry and microscale combustion tests. Incorporating fire retardant (PFRV), BaTiO, and graphene oxide (GO) into a material results in increased resistance to fire when compared to the control sample. A thermogravimetric analysis revealed that, as a general trend, the presence of PFRV and BaTiO nanoparticles enhances the residue quantity at a temperature of 700 °C from 7.9 wt% to 23.6 wt%. Their dielectric properties were evaluated with Broad Band Dielectric Spectroscopy. The electrical conductivity of the samples was determined and discussed in relation to the LiClO content. The electrical properties, including permittivity and conductivity, are being enhanced by the use of LiClO. Additionally, a relaxation peak has been observed in the dielectric losses at frequencies exceeding 103 Hz. The electrical properties, including permittivity and conductivity, are being enhanced by the use of LiClO. Additionally, a relaxation peak has been observed in the dielectric losses at frequencies exceeding 103 Hz. Out of the various composites tested, the composite containing 35 wt% of LiClO exhibits the highest alternating current (AC) conductivity, with a measured value of 2.46 × 10 S/m. Taking into consideration all the aspects discussed, these improved composites are intended for utilization in the manufacturing of Li-Ion batteries.
PubMed: 37505004
DOI: 10.3390/membranes13070636 -
Research Square Aug 2023Alzheimer disease (AD) is a neurodegenerative disease and the main cause for dementia. The irreversible neurodegeneration leads to a gradual loss of brain function...
Alzheimer disease (AD) is a neurodegenerative disease and the main cause for dementia. The irreversible neurodegeneration leads to a gradual loss of brain function characterized predominantly by memory loss. Cerebrovascular changes are common neuropathologic findings in aged subjects with dementia. Cerebrovascular integrity is critical for proper metabolism and perfusion of the brain, as cerebrovascular remodeling may render the brain more susceptible to pulse pressure and may be associated with poorer cognitive performance and greater risk of cerebrovascular events. The objective of this study is to provide understanding of cerebrovascular remodeling with AD progression. A total of 28 brain donor participants with human anterior cerebral artery (ACA) from controls and pathologically diagnosed AD groups (early - Braak stages I-II; intermediate - Braak stages III-IV; and advanced - Braak stages V-VI) were included in this study. Mechanical testing, histology, advanced optical imaging, and mass spectrometry were performed to study the progressive structural and functional changes of ACAs with AD progression. Biaxial extension-inflation tests showed that ACAs became progressively less compliant, and the longitudinal stress in the intermediate& advanced AD groups was significantly higher than that from the control group. With pathological AD development, the inner and outer diameter of ACA remained almost unchanged; however, histology study revealed progressive smooth muscle cell atrophy and loss of elastic fibers which led to compromised structural integrity of the arterial wall. Multiphoton imaging demonstrated elastin degradation at the media-adventitia interface, which led to the formation of an empty band of 21.0 ± 15.4 μm and 32.8 ± 9.24 μm in width for the intermediate& advanced AD groups, respectively. Furthermore, quantitative birefringence microscopy showed disorganized adventitial collagen with AD development. Mass spectrometry analysis provided further evidence of altered collagen content and other extracellular matrix (ECM) molecule and smooth muscle cell changes that were consistent with the mechanical and structural alterations. Collectively, our study provides understanding of the mechanical and structural cerebrovascular deterioration in cerebral arteries with AD, which may be related to neurodegenration and pathology in the brain.
PubMed: 37693508
DOI: 10.21203/rs.3.rs-3283587/v1 -
Advanced Science (Weinheim,... Nov 2023Flexible microwave absorbers with Joule heating performance are urgently desired to meet the demands of extreme service environments. Herein, a type of flexible...
Flexible microwave absorbers with Joule heating performance are urgently desired to meet the demands of extreme service environments. Herein, a type of flexible composite film is constructed by homogeneously dispersing a hierarchical Ni-carbon microtube (Ni/CMT) into a processable polytetrafluoroethylene (PTFE) matrix. The Ni/CMT are interconnected into a 3D conductive network, in which the huge interior cavity of the carbon microtube (CMT) improves impedance matching and provides additional hyper channels for electromagnetic (EM) waves dissipation, and the hierarchical magnetic Ni nanoparticles enhance the synergistic interactions between confined heterogeneous interfaces. Such an ingenious structure endows the composites with excellent electrothermal performance and improves their serviceability for application under extreme environments. Moreover, under a low fill loading of 3 wt.%, the Ni/CMT/PTFE (NCP) can achieve excellent low-frequency microwave absorption (MA) property with a minimum reflection loss of -59.12 dB at 5.92 GHz, which covers almost the entire C-band. Relying on their brilliant MA property, an EM sensor is designed and achieved by the resonance coupling of the patterned NCP. This work opens up a new way for the design of next-generation microwave absorbers that meet the requirements of EM packaging, proofing water and removing ice, fire safety, and health monitoring.
PubMed: 37721442
DOI: 10.1002/advs.202304218 -
Acta Biomaterialia Jul 2023The hierarchical design of bio-based nanostructured materials such as bone enables them to combine unique structure-mechanical properties. As one of its main components,...
The hierarchical design of bio-based nanostructured materials such as bone enables them to combine unique structure-mechanical properties. As one of its main components, water plays an important role in bone's material multiscale mechanical interplay. However, its influence has not been quantified at the length-scale of a mineralised collagen fibre. Here, we couple in situ micropillar compression, and simultaneous synchrotron small angle X-ray scattering (SAXS) and X-ray diffraction (XRD) with a statistical constitutive model. Since the synchrotron data contain statistical information on the nanostructure, we establish a direct connection between experiment and model to identify the rehydrated elasto-plastic micro- and nanomechanical fibre behaviour. Rehydration led to a decrease of 65%-75% in fibre yield stress and compressive strength, and 70% in stiffness with a 3x higher effect on stresses than strains. While in agreement with bone extracellular matrix, the decrease is 1.5-3x higher compared to micro-indentation and macro-compression. Hydration influences mineral more than fibril strain with the highest difference to the macroscale when comparing mineral and tissue levels. The effect of hydration seems to be strongly mediated by ultrastructural interfaces while results provide insights towards mechanical consequences of reported water-mediated structuring of bone apatite. The missing reinforcing capacity of surrounding tissue for an excised fibril array is more pronounced in wet than dry conditions, mainly related to fibril swelling. Differences leading to higher compressive strength between mineralised tissues seem not to depend on rehydration while the lack of kink bands supports the role of water as an elastic embedding influencing energy-absorption mechanisms. STATEMENT OF SIGNIFICANCE: Characterising structure-property-function relationships in hierarchical biological materials helps us to elucidate mechanisms that enable their unique properties. Experimental and computational methods can advance our understanding of their complex behaviour with the potential to inform bio-inspired material development. In this study, we close a gap for bone's fundamental mechanical building block at micro- and nanometre length scales. We establish a direct connection between experiments and simulations by coupling in situ synchrotron tests with a statistical model and quantify the behaviour of rehydrated single mineralised collagen fibres. Results suggest a high influence of hydration on structural interfaces, and the role of water as an elastic embedding by outlining important differences between wet and dry elasto-plastic properties of mineral nanocrystals, fibrils and fibres.
Topics: Scattering, Small Angle; Stress, Mechanical; X-Ray Diffraction; Minerals; Collagen
PubMed: 37059408
DOI: 10.1016/j.actbio.2023.03.041