-
Journal of Functional Biomaterials Jul 2023One of the most ambitious goals for bone implants is to improve bioactivity, incapability, and mechanical properties; to reduce the need for further surgery; and...
One of the most ambitious goals for bone implants is to improve bioactivity, incapability, and mechanical properties; to reduce the need for further surgery; and increase efficiency. Hydroxyapatite (HA), the main inorganic component of bones and teeth, has high biocompatibility but is weak and brittle material. Cortical bone is composed of 70% calcium phosphate (CaP) and 30% collagen and forms a complex hierarchical structure with anisotropic and lamellar microstructure (osteons) which makes bone a light, strong, tough, and durable material that can support large loads. However, imitation of concentric lamellar structure of osteons is difficult to achieve in fabrication. Nacre from mollusk shells with layered structures has now become the archetype of the natural "model" for bio-inspired materials. Incorporating a nacre-like layered structure into bone implants can enhance their mechanical strength, toughness, and durability, reducing the risk of implant catastrophic failure or fracture. The layered structure of nacre-like HA/polymer composites possess high strength, toughness, and tunable stiffness which matches that of bone. The nacre-like HA/polymer composites should also possess excellent biocompatibility and bioactivity which facilitate the bonding of the implant with the surrounding bone, leading to improved implant stability and long-term success. To achieve this, a bi-directional freeze-casting technique was used to produce elongated lamellar HA were further densified and infiltrated with polymer to produce nacre-like HA/polymer composites with high strength and fracture toughness. Mechanical characterization shows that increasing the ceramic fractions in the composite increases the density of the mineral bridges, resulting in higher flexural and compressive strength. The nacre-like HA/(methyl methacrylate (MMA) + 5 wt.% acrylic acid (AA)) composites with a ceramic fraction of 80 vol.% showed a flexural strength of 158 ± 7.02 MPa and a Young's modulus of 24 ± 4.34 GPa, compared with 130 ± 5.82 MPa and 19.75 ± 2.38 GPa, in the composite of HA/PMMA, due to the higher strength of the polymer and the interface of the composite. The fracture toughness in the composition of 5 wt.% PAA to PMMA improves from 3.023 ± 0.98 MPa·m to 5.27 ± 1.033 MPa·m by increasing the ceramic fraction from 70 vol.% to 80 vol.%, respectively.
PubMed: 37623638
DOI: 10.3390/jfb14080393 -
Materials (Basel, Switzerland) Jun 2023Mechanical processing of cortical bone tissue is one of the most common surgical procedures. A critical issue accompanying this processing is the condition of the...
Mechanical processing of cortical bone tissue is one of the most common surgical procedures. A critical issue accompanying this processing is the condition of the surface layer, which can stimulate tissue growth and serve as a drug carrier. A comparison of the surface condition before and after orthogonal and abrasive processing was conducted to validate the influence of bone tissue's processing mechanism and orthotropic properties on the surface topography. A cutting tool with a defined geometry and a custom-made abrasive tool was used. The bone samples were cut in three directions, depending on the orientation of the osteons. The cutting forces, acoustic emission, and surface topography were measured. The level of isotropy and the topography of the grooves showed statistical differences relative to the anisotropy directions. After orthogonal processing, the surface topography parameter Ra was determined from 1.38 ± 0.17 μm to 2.82 ± 0.32. In the case of abrasive processing, no correlation was found between the orientation of osteons and topographical properties. The average groove density for abrasive machining was below 1004 ± 0.7, and for orthogonal, it was above 1156 ± 58. Due to the positive properties of the developed bone surface, it is advisable to cut in the transverse direction and parallel to the axis of the osteons.
PubMed: 37374480
DOI: 10.3390/ma16124293 -
PloS One 2024The histological, or microscopic, appearance of bone tissue has long been studied to identify species-specific traits. There are several known histological...
The histological, or microscopic, appearance of bone tissue has long been studied to identify species-specific traits. There are several known histological characteristics to discriminate animal bone from human, but currently no histological characteristic that has been consistently identified in human bone exclusive to other mammals. The drifting osteon is a rare morphotype found in human long bones and observationally is typically absent from common mammalian domesticates. We surveyed previously prepared undecalcified histological sections from 25 species (human n = 221; nonhuman primate n = 24; nonprimate n = 169) to see if 1) drifting osteons were indeed more common in humans and 2) this could be a discriminating factor to identify human bone histologically. We conclude that drifting osteons are indeed more prevalent in human and nonhuman primate bone relative to nonprimate mammalian bone. Two criteria identify a rib or long bone fragment as human, assuming the fragment is unlikely to be from a nonhuman primate given the archaeological context: 1) at least two drifting osteons are present in the cross-section and 2) a drifting osteon prevalence (or as a percentage of total secondary osteons) of ≥ 1%. We present a quantitative histological method that can positively discriminate human bone from nonprimate mammalian bone in archaeological contexts.
Topics: Animals; Humans; Haversian System; Prevalence; Mammals; Histological Techniques; Primates
PubMed: 38394068
DOI: 10.1371/journal.pone.0298029 -
Journal of Pharmacy & Bioallied Sciences Feb 2024This study was performed with the idea of assessing age and gender utilizing differences in osseous microanatomy in human jawbones.
AIM
This study was performed with the idea of assessing age and gender utilizing differences in osseous microanatomy in human jawbones.
MATERIALS AND METHODS
The study was conducted retrospectively among human jawbone samples. Various morphometric assessments such as trabecular width, marrow space, and their corelation were studied. In the samples, variations among osteon numbers, differences in the shapes of the osteocytes of jawbones, and amount of inflammation in the bony areas were recorded.
RESULTS
It was noted in this study that mean values of the diameter of the Haversian canal and vessel density had a noteworthy increase in female jawbone samples. The amount of osteocytes in both female and male bone samples was also statistically significant in terms of the correlation coefficient.
CONCLUSION
We concluded that more sensitive identification of human remains, that is, age and gender analysis, can be performed by histomorphometric evaluation of bone remains.
PubMed: 38595368
DOI: 10.4103/jpbs.jpbs_474_23 -
Journal of Anatomy Jun 2024There is a need to fully understand intra-skeletal variability within different populations to develop and improve age-at-death estimation methods. This study evaluates...
There is a need to fully understand intra-skeletal variability within different populations to develop and improve age-at-death estimation methods. This study evaluates age-related histomorphometric changes in three different bones intra-individually in a modern Australian sample. Four female and 13 male elderly Australian adult donors (67-93 years) were examined for osteon population density (OPD), osteon area (On.Ar), and Haversian canal area (H.Ar) of secondary osteons to compare between femora, ribs, and humeri and assess against age. In the pooled sex sample, no statistically significant correlations were observed between age and each histological variable. In the males, OPD of the femur increased significantly with age, as did porosity in the rib. In the male humeri, OPD increased moderately with age, while H.Ar was decreased moderately with age. Intra-bone comparisons showed that males had significantly higher osteon counts in their ribs compared to their femora, while their ribs showed statistically significantly less porosity than their humeri. When bone size was accounted for, by adjusting the femur and humerus histology data by robusticity indices, histology values were found to be similar between bones within the same individual. This is despite the upper and lower limbs receiving different ranges and types of biomechanical load. Our findings demonstrate that bone size influences histomorphometry, and this could confound age-at-death estimations that have not been adjusted for robusticity. Future studies would benefit from examining bone histomorphometry within a larger sample size and incorporating bone robusticity measures into histology analyses.
Topics: Humans; Male; Aged; Female; Aged, 80 and over; Australia; Haversian System; Femur; Ribs; Aging; Humerus
PubMed: 38238907
DOI: 10.1111/joa.14010 -
Bone Mar 2024Osteon morphology provides valuable information about the interplay between different processes involved in bone remodelling. The correct quantitative interpretation of...
Osteon morphology provides valuable information about the interplay between different processes involved in bone remodelling. The correct quantitative interpretation of these morphological features is challenging due to the complexity of interactions between osteoblast behaviour, and the evolving geometry of cortical pores during pore closing. We present a combined experimental and mathematical modelling study to provide insights into bone formation mechanisms during cortical bone remodelling based on histological cross-sections of quiescent human osteons and hypothesis-testing analyses. We introduce wall thickness asymmetry as a measure of the local asymmetry of bone formation within an osteon and examine the frequency distribution of wall thickness asymmetry in cortical osteons from human iliac crest bone samples from women 16-78 years old. Our measurements show that most osteons possess some degree of asymmetry, and that the average degree of osteon asymmetry in cortical bone evolves with age. We then propose a comprehensive mathematical model of cortical pore filling that includes osteoblast secretory activity, osteoblast elimination, osteoblast embedment as osteocytes, and osteoblast crowding and redistribution along the bone surface. The mathematical model is first calibrated to symmetric osteon data, and then used to test three mechanisms of asymmetric wall formation against osteon data: (i) delays in the onset of infilling around the cement line; (ii) heterogeneous osteoblastogenesis around the bone perimeter; and (iii) heterogeneous osteoblast secretory rate around the bone perimeter. Our results suggest that wall thickness asymmetry due to off-centred Haversian pores within osteons, and that nonuniform lamellar thicknesses within osteons are important morphological features that can indicate the prevalence of specific asymmetry-generating mechanisms. This has significant implications for the study of disruptions of bone formation as it could indicate what biological bone formation processes may become disrupted with age or disease.
Topics: Humans; Female; Adolescent; Young Adult; Adult; Middle Aged; Aged; Haversian System; Osteoblasts; Bone and Bones; Osteocytes; Cortical Bone
PubMed: 38184100
DOI: 10.1016/j.bone.2023.116998 -
Scientific Reports Feb 2024The negative effect of caponization on the structural, geometric and mechanical parameters of femur and tibia has been shown in a few studies. Nevertheless, its...
The negative effect of caponization on the structural, geometric and mechanical parameters of femur and tibia has been shown in a few studies. Nevertheless, its influence on tibia bone microarchitecture is still largely unknown. Therefore, this study aimed to assess the effect of castration on the microstructural parameters of the trabecular and compact bone of tibia bone in crossbred chickens. The experiment involved 96 roosters derived from crossing Yellowleg Partridge hens ([Formula: see text]-33) and Rhode Island Red cockerels (R-11) fattened until the 16th, 20th and 24th week of life. Animals were randomly divided into 2 groups of 48 each. Group I (control) consisted of intact roosters and group II (experimental) consisted of birds subjected to caponization at the 8th week of age. The castration surgery had no influence on some properties within compact bone such as osteon diameter On.Dm, osteon perimeter On.Pm, osteon area On.Ar, osteocyte lacunar number Ot.Lc.N, osteon bone area On.B.Ar, osteon wall thickness On.W.Th as well as thick-mature collagen content in all analyzed age groups of animals. Nevertheless, our results demonstrate that castration caused a decrease of Haversian canal area Hc.Ar, osteocyte lacunar area Ot.Lc.Ar and osteocyte lacunar porosity Ot.Lc.Po among the 16-week-old birds, decrease of Haversian canal perimeter Hc.Pm and increase of fraction of bone area On.B.Ar/On.Ar among 16- and 24-week-old individuals and also an increase of osteocyte lacunar density Ot.Lc.Dn in the osteons of the oldest roosters. Additionally, some microstructural parameters of trabecular bone show the negative effect of caponization. The youngest 16-week-old capons were characterized by thinnin the trabecular in the epiphysis part of tibia. Moreover, in the case of 24-week-old, there is an increase in the trabecular separation Tb.Sp with simultaneous decrease of trabecular number Tb.N compared to roosters, which may suggest the increase of the bone resorption among the oldest individuals. The increased bone turnover in the epiphysis part of the tibia bone also indicates changes in the collagen fibers distribution, where among 20-week-old animals there is a decrease in the content of immature thin collagen fibers with simultaneous increase in the content of mature thick collagen fibers. Furthermore, among the oldest 24-week-old individuals we can observe the increased thick-to-thin collagen ratio, which may be a sign of slowing down in bone formation.
Topics: Humans; Male; Animals; Female; Tibia; Chickens; Femur; Epiphyses; Collagen
PubMed: 38374163
DOI: 10.1038/s41598-024-54791-6 -
Bone Dec 2023Current clinical methods of bone health assessment depend to a great extent on bone mineral density (BMD) measurements. However, these methods only act as a proxy for...
Current clinical methods of bone health assessment depend to a great extent on bone mineral density (BMD) measurements. However, these methods only act as a proxy for bone strength and are often only carried out after the fracture occurs. Besides BMD, composition and tissue-level mechanical properties are expected to affect the whole bone's strength and toughness. While the elastic properties of the bone extracellular matrix (ECM) have been extensively investigated over the past two decades, there is still limited knowledge of the yield properties and their relationship to composition and architecture. In the present study, morphological, compositional and micropillar compression bone data was collected from patients who underwent hip arthroplasty. Femoral neck samples from 42 patients were collected together with anonymous clinical information about age, sex and primary diagnosis (coxarthrosis or hip fracture). The femoral neck cortex from the inferomedial region was analyzed in a site-matched manner using a combination of micromechanical testing (nanoindentation, micropillar compression) together with micro-CT and quantitative polarized Raman spectroscopy for both morphological and compositional characterization. Mechanical properties, as well as the sample-level mineral density, were constant over age. Only compositional properties demonstrate weak dependence on patient age: decreasing mineral to matrix ratio (p = 0.02, R = 0.13, 2.6 % per decade) and increasing amide I sub-peak ratio I/I (p = 0.04, R = 0.11, 1.5 % per decade). The patient's sex and diagnosis did not seem to influence investigated bone properties. A clear zonal dependence between interstitial and osteonal cortical zones was observed for compositional and elastic bone properties (p < 0.0001). Site-matched microscale analysis confirmed that all investigated mechanical properties except yield strain demonstrate a positive correlation with the mineral fraction of bone. The output database is the first to integrate the experimentally assessed microscale yield properties, local tissue composition and morphology with the available patient clinical information. The final dataset was used for bone fracture risk prediction in-silico through the principal component analysis and the Naïve Bayes classification algorithm. The analysis showed that the mineral to matrix ratio, indentation hardness and micropillar yield stress are the most relevant parameters for bone fracture risk prediction at 70 % model accuracy (0.71 AUC). Due to the low number of samples, further studies to build a universal fracture prediction algorithm are anticipated with the higher number of patients (N > 200). The proposed classification algorithm together with the output dataset of bone tissue properties can be used for the future comparison of existing methods to evaluate bone quality as well as to form a better understanding of the mechanisms through which bone tissue is affected by aging or disease.
PubMed: 37769956
DOI: 10.1016/j.bone.2023.116920 -
Archives of Plastic Surgery Sep 2023The outcome of alveolar grafting with synthetic bone substitute (Osteon III) in various bone defect volumes is highlighted. A prospective study was accomplished...
The outcome of alveolar grafting with synthetic bone substitute (Osteon III) in various bone defect volumes is highlighted. A prospective study was accomplished on 55 patients (6-13 years of age) with unilateral alveolar bone cleft. Osteon III, consisting of hydroxyapatite and tricalcium phosphate, is used to reconstruct the defect. Alveolus defect diameter was calculated before surgery (V1), after 3 months (V2), and finally after 6 months (V3) postsurgery. In the -test, a significant difference and correlation between V1, V2, and V3 are stated. A value of 0.01 is considered a significant difference between parameters. The degree of cleft is divided into three categories: small (9 cases), medium (20 patients), and large (26 cases).The bone volume of the clefted site is divided into three steps: volume 1: (mean 18.1091 mm ); step 2: after 3 months, volume 2 resembles the amount of unhealed defect (mean 0.5109 mm ); and the final bone volume assessment is made after 6 months (22.5455 mm ). Both show statistically significant differences in bone volume formation. An alloplastic bone substitute can also be used as a graft material because of its unlimited bone retrieval. Osteon III can be used to reconstruct the alveolar cleft smoothly and effectively.
PubMed: 37808326
DOI: 10.1055/a-2113-3084 -
Journal of Biological Engineering Jul 2023Modular tissue engineering (MTE) is a novel "bottom-up" approach that aims to mimic complex tissue microstructural features. The constructed micromodules are assembled...
BACKGROUND
Modular tissue engineering (MTE) is a novel "bottom-up" approach that aims to mimic complex tissue microstructural features. The constructed micromodules are assembled into engineered biological tissues with repetitive functional microunits and form cellular networks. This is emerging as a promising strategy for reconstruction of biological tissue.
RESULTS
Herein, we constructed a micromodule for MTE and developed engineered osteon-like microunits by inoculating human-derived umbilical cord mesenchymal stem cells (HUMSCs) onto nHA/PLGA microspheres with surface modification of dual growth factors (BMP2/bFGF). By evaluating the results of proliferation and osteogenic differentiation ability of HUMSCs in vitro, the optimal ratio of the dual growth factor (BMP2/bFGF) combination was derived as 5:5. In vivo assessments showed the great importance of HUMSCs for osteogneic differentiation. Ultimately, direct promotion of early osteo-differentiation manifested as upregulation of Runx-2 gene expression. The vascularization capability was evaluated by tube formation assays, demonstrating the importance of HUMSCs in the microunits for angiogenesis.
CONCLUSIONS
The modification of growth factors and HUMSCs showed ideal biocompatibility and osteogenesis combined with nHA/PLGA scaffolds. The micromodules constructed in the current study provide an efficient stem cell therapy strategy for bone defect repair.
PubMed: 37430290
DOI: 10.1186/s13036-023-00360-w