-
Root resorption during maxillary molar intrusion with clear aligners: a randomized controlled trial.The Angle Orthodontist Nov 2023To compare changes in maxillary molar root resorption, intrusion amount, dentoskeletal measures, and maximum bite force (MBF) between clear aligners (CA) and fixed... (Randomized Controlled Trial)
Randomized Controlled Trial
OBJECTIVES
To compare changes in maxillary molar root resorption, intrusion amount, dentoskeletal measures, and maximum bite force (MBF) between clear aligners (CA) and fixed appliances with miniscrew (FM) during molar intrusion.
MATERIALS AND METHODS
Forty adults with anterior open bite were randomized into either CA or FM groups. Lateral cephalograms, cone-beam computed tomography (CBCT), and MBF were collected at pretreatment (T0) and 6 months of treatment (T1). Maxillary molar intrusion in FM were intruded by nickel-titanium (NiTi) closed-coil spring delivered force (150 grams/side) while clear aligners combined with squeezing exercise were performed in CA. Parametric tests were used for statistical analysis.
RESULTS
After 6 months of treatment, significant root resorption of 0.21-0.24 mm in CA and 0.38-0.47 mm in FM were found while maxillary molars were intruded 0.68 and 1.49 mm in CA and FM, respectively. CA showed significant less root resorption and intrusion than FM. Overbite, bite closing, and MBF increased significantly. CA showed significantly less overbite and SN-MP changes but more MBF increase than FM. MBF in CA was correlated with the amount of maxillary molar intrusion (r = 0.736, P < .05).
CONCLUSIONS
Maxillary molar intrusion and root resorption in CA were half the amount in FM in 6 months. The amount of maxillary molar root resorption was one-third of the intrusion distance. CA displayed less overbite increase and bite closing but more MBF increase than FM. MBF in CA was positively correlated with the molar intrusion amount.
Topics: Adult; Humans; Root Resorption; Overbite; Open Bite; Malocclusion, Angle Class II; Molar; Tooth Movement Techniques; Orthodontic Anchorage Procedures; Orthodontic Appliances, Removable; Maxilla
PubMed: 37922387
DOI: 10.2319/010723-14.1 -
The Angle Orthodontist Jan 2024To determine whether achieved outcome regarding overjet and overbite matched the predicted outcome following treatment with Invisalign (Align Technology, San Jose,...
OBJECTIVES
To determine whether achieved outcome regarding overjet and overbite matched the predicted outcome following treatment with Invisalign (Align Technology, San Jose, Calif) aligner appliances.
MATERIALS AND METHODS
Data including pretreatment, predicted and achieved overjet, and overbite measurements provided by Align's digital treatment facility, ClinCheck Pro, were evaluated. Descriptive statistics, Mann-Whitney U-test, and Wilcoxon rank-sum intraclass correlation (ICC) test results were calculated.
RESULTS
From an initial sample of 600, 355 adult patients satisfied the inclusion and exclusion criteria. ICC scores for data input were excellent. Median (interquartile range [IQR]) age was 30.14 (23.33, 39.92) years and most (n = 259; 72.95%) were women. Almost one-third (n = 101; 28.45%) had undergone extraction as part of their treatment. More aligners were prescribed in the initial digital treatment plan for patients (median, 44; IQR: 35, 51.5; minimum, 17; maximum, 92) undergoing extractions as part of their orthodontic treatment than those who were not (median, 24; IQR: 18.25, 32; minimum, 13; maximum, 85) (P < .0001). Planned changes in overjet differed significantly from achieved outcomes (P < .001). Planned increases in overbite resulted in up to more than twice (222.72%) as much increase than predicted. Planned reduction of overbite achieved 8.69% of its predicted reduction in extraction cases.
CONCLUSIONS
Achieved overjet and overbite measurements differed significantly from the predicted outcomes at the end of an initial sequence of aligners. Planned increases in overbite resulted in greater overbite correction than predicted, particularly in extraction cases. Planned overbite reduction was challenging, especially in patients with extractions.
Topics: Adult; Humans; Female; Male; Overbite; Retrospective Studies; Malocclusion, Angle Class II; Orthodontic Appliances, Removable; Dental Care
PubMed: 37839803
DOI: 10.2319/030923-161.1 -
BMC Oral Health Aug 2023The main purpose of the study was to investigate the prevalence and related risk factors of malocclusion in permanent dentition among adolescents in Shanghai, and...
BACKGROUND
The main purpose of the study was to investigate the prevalence and related risk factors of malocclusion in permanent dentition among adolescents in Shanghai, and provide basic data for government's preventive strategies and intervention plans.
METHODS
1799 adolescents aged 11-15 years old from 18 middle schools in 6 districts of Shanghai were recruited to investigate oral health status and related risk factors using cluster random sampling method in 2021. Malocclusion and caries were examined by on-site inspection. The investigation criteria referred to Bjoerk and the recommendation of the WHO. The malocclusion inspection items included molars relationship, canine relationship, overbite, overjet, midline displacement, anterior crossbite, posterior crossbite, scissors bite, crowding and spacing. The subjects were asked to fill in a questionnaire including parents' education level, oral health behaviors and dietary habits. The chi-square test and logistic regression analysis were used to analyze the relationship between malocclusion and risk factors.
RESULTS
1799 adolescents were included in the study and the prevalence of malocclusion in adolescents in Shanghai was 83.5%, and the proportion of molar relationship class I, class II, and class III was 48.9%, 14.7%, and 19.0%, respectively. The most common occlusal characteristic of malocclusion was anterior crowding, followed by midline irregularities and deep overbite, with prevalence rates of 44.8%, 39.0% and 38.6%, respectively. The prevalence rate of adolescents with caries was 34.3%. Those who had dental caries and preferred soft food were more likely to have abnormal occlusal characteristics (p < 0.05).
CONCLUSION
The prevalence of malocclusion in adolescents in Shanghai is high, so it is of great significance to strengthen oral health education, allocate proper preventive strategies and carry out the early correction if necessary.
Topics: Humans; Overbite; Dental Caries; Prevalence; China; Malocclusion
PubMed: 37620836
DOI: 10.1186/s12903-023-03187-5 -
Journal of Dental Research, Dental... 2023Posterior intrusion with skeletal anchorage is one of the effective methods in the treatment of anterior open bite. Knowing the effects of posterior intrusion, the... (Review)
Review
BACKGROUND
Posterior intrusion with skeletal anchorage is one of the effective methods in the treatment of anterior open bite. Knowing the effects of posterior intrusion, the amount of possible molar intrusion using skeletal anchorage, and its impact on clinical and cephalometric indicators can help the clinician choose the optimal treatment method, especially in borderline surgical cases.
METHODS
In this systematic review, a series of articles were collected through a systematic search in databases, and the titles and summaries of all these articles were reviewed. After removing the irrelevant articles, the full texts of the related articles were read carefully, and their validity was evaluated. Only RCTs and observational studies that complied with PICO questions were included. The Cochrane Risk of Bias 2.0 (RoB 2), ROBINS-I, and GRADE were used to assess the risk of bias in the included studies. The relevant information on selected articles was extracted, and a meta-analysis was performed with Review Manager 5.4 software.
RESULTS
The meta-analysis revealed a significant average molar intrusion of 2.89 mm using temporary anchorage devices (TADs). A subgroup analysis showed that miniplates achieved greater intrusion (3.29 mm) compared to miniscrews (2.25 mm) (=0.03). The level of applied force did not significantly affect the degree of intrusion. Dental parameters such as overbite and overjet were notably altered, with overbite increasing by 4.81 mm and overjet decreasing by 2.06 mm on average. As for the skeletal cephalometric characteristics, SNB, ANB, and SN-Pog increased while mandibular plane angle and lower anterior facial height (LAFH) decreased, and these changes were significant. Meanwhile, SNA and palatal angle changes were not significant.
CONCLUSION
TADs have proved effective in achieving significant intrusion of maxillary molars, leading to marked improvements in dental and skeletal characteristics in patients with open bite malocclusion. Miniplates proved more effective in achieving greater intrusion.
PubMed: 38584993
DOI: 10.34172/joddd.2023.40754 -
Clinical and Experimental Dental... Aug 2023The aim of this article is to establish a comprehensive nationwide prevalence of malocclusion traits on the sagittal, vertical, and transverse planes of space in the... (Meta-Analysis)
Meta-Analysis Review
OBJECTIVES
The aim of this article is to establish a comprehensive nationwide prevalence of malocclusion traits on the sagittal, vertical, and transverse planes of space in the Turkish population.
MATERIAL AND METHODS
A systematic search of PubMed, Scopus, and Web of Science was supplemented by manual searches of Google Scholar and the reference lists of included studies. Original Turkish health studies of any age were included. Strengthening the Reporting of Observational Studies in Epidemiology assessed study quality and bias (STROBE). Sagittal, vertical, and transverse malocclusion features were retrieved and gathered.
RESULTS
Eleven studies were selected from 434 titles. Two studies showed a high risk of bias, eight low and one moderate. Thirteen thousand two hundred seventy-one individuals were investigated from early childhood to late adulthood. Most studies were sampled from universities and dental (nonorthodontic) clinics. The pooled malocclusion prevalence was 56% for Class I (95% confidence interval (CI): 44-68%), 31% for Class II (CI: 6-42%), and 11% for Class III (CI: 21-37%). The other common types of malocclusions were crowding (41%, CI: 18-65%), overjet (34%, CI: 21-50%), negative overjet (13%, CI: 7-20%), and crossbite (11%, CI: 7-15%). Additionally, there was no significant difference in Class I (relative risk [RR] = 1.00, [0.96-1.05]), Class II ([RR] = 0.97, [0.92-1.03]), and Class III ([RR] = 1.08, [0.96-1.225]) malocclusion by gender.
CONCLUSIONS
This study showed Class I malocclusion has a high prevalence among the Turkish population followed by Class II and Class III malocclusions. In addition, crowding and overjet were the most prevalent malocclusions among Turkish individuals. There were no significant differences in the prevalence of malocclusions between males and females.
Topics: Child, Preschool; Male; Female; Humans; Child; Adolescent; Adult; Malocclusion, Angle Class II; Prevalence; Malocclusion; Malocclusion, Angle Class III; Overbite
PubMed: 37574975
DOI: 10.1002/cre2.771 -
International Journal of Oral and... Oct 2023The digital articulation of dental models is gradually replacing the conventional physical approach for occlusal prediction planning. This study was performed to compare...
The digital articulation of dental models is gradually replacing the conventional physical approach for occlusal prediction planning. This study was performed to compare the accuracy and reproducibility of free-hand articulation of two groups of digital and physical dental models, 12 Class I (group 1) and 12 Class III (group 2). The models were scanned using an intraoral scanner. The physical and digital models were independently articulated 2 weeks apart by three orthodontists to achieve the maximum inter-digitation, with coincident midlines and a positive overjet and overbite. The occlusal contacts provided by the software color-coded maps were assessed and the differences in the pitch, roll, and yaw were measured. The reproducibility of the achieved occlusion of both the physical and digital articulation was excellent. The z-axis displayed the smallest absolute mean differences of 0.10 ± 0.08 mm and 0.27 ± 0.24 mm in the repeated physical and repeated digital articulations, respectively, both in group 2. The largest discrepancies between the two methods of articulation were in the y-axis (0.76 ± 0.60 mm, P = 0.010) and in roll (1.83° ± 1.72°, P = 0.005). The overall measured differences were< 0.8 mm and< 2°. Despite the steep learning curve, digital occlusal planning is accurate enough for clinical applications.
Topics: Humans; Orthognathic Surgery; Reproducibility of Results; Software; Dental Occlusion; Malocclusion, Angle Class II; Imaging, Three-Dimensional; Computer-Aided Design
PubMed: 36941160
DOI: 10.1016/j.ijom.2023.03.001 -
European Journal of Orthodontics Nov 2023The genetic basis of dentoalveolar characteristics has been investigated by several studies, however, the findings are equivocal. The objective of this systematic review... (Meta-Analysis)
Meta-Analysis
BACKGROUND AND OBJECTIVE
The genetic basis of dentoalveolar characteristics has been investigated by several studies, however, the findings are equivocal. The objective of this systematic review and meta-analysis was to evaluate the heritability of dental arches and occlusal parameters in different stages of human dentition.
SEARCH METHODS
Electronic databases PubMed, Embase, Scopus, Web of Science, and Dentistry and Oral Science Source were searched up to August 2023 without the restriction of language or publication date.
SELECTION CRITERIA
Empirical studies investigating the heritability of dentoalveolar parameters among twins and siblings were included in the review.
DATA COLLECTION AND ANALYSIS
Study selection, data extraction, and risk of bias assessment were performed independently and in duplicate by two authors and a third author resolved conflicts if needed. Joanna Briggs Institute's critical appraisal tool was used to evaluate the risk of bias among studies and the certainty of evidence was assessed using the Grading of Recommendation, Assessment, Development, and Evaluation (GRADE) criteria.
RESULTS
Twenty-eight studies were included in the systematic review, of which 15 studies reporting heritability coefficients in the permanent dentition stages were deemed suitable for the meta-analysis. Random-effects meta-analyses showed high heritability estimates for maxillary intermolar width (0.52), maxillary intercanine width (0.54), mandibular intermolar width (0.55), mandibular intercanine width (0.55), maxillary arch length (0.76), mandibular arch length (0.57), and palatal depth (0.56). The heritability estimates for the occlusal parameters varied considerably, with relatively moderate values for crossbite (0.46) and overbite (0.44) and low values for buccal segment relationship (0.32), overjet (0.22), and rotation and displacement of teeth (0.16). However, the certainty of evidence for most of the outcomes was low according to the GRADE criteria.
CONCLUSIONS
Based on the available evidence, it can be concluded that the dental arch dimensions have a high heritability while the occlusal parameters demonstrate a moderate to low heritability.
REGISTRATION
PROSPERO (CRD42022358442).
Topics: Humans; Dental Arch; Malocclusion; Overbite; Malocclusion, Angle Class II; Dentition, Permanent
PubMed: 37822010
DOI: 10.1093/ejo/cjad061 -
The Saudi Dental Journal Sep 2023An anterior bite plane (ABP) is an orthodontic appliance that prevents posterior teeth from making contact. This appliance's functional concept is to reduce muscle...
OBJECTIVES
An anterior bite plane (ABP) is an orthodontic appliance that prevents posterior teeth from making contact. This appliance's functional concept is to reduce muscle activity, overcome deep overbite, and temporomandibular joint (TMJ) disorders (TMD). However, ABP treatment for malocclusion frequently results in unfavorable reversible and irreversible long-term effects. This problem presents difficulties for dentists in developing an appropriate treatment modification plan in order to achieve the best results. As a result, the goal of this study is to observe the effects of different ABP types on the TMJ and mandible.
MATERIALS AND METHODS
Thirty-six three-month-old male Wistar strain rats were divided into three groups: control, upper flat, and upper-lower inclined ABP. The overbite and body weight were measured. TMJ was examined histologically using hematoxylin and eosin (HE). To observe the entire mandibular bone in response to ABP, mandibular planes and angulations were measured.
RESULTS
After 7 days, the upper-lower inclined ABP group has significantly lower body weight than the control group. On days 7 and 14, overbite was significantly reduced in both the upper flat and upper-lower inclined ABP groups. The superficial layer of the condyle was depleted in both ABP groups, according to HE analysis. Mandibular angle analysis revealed that the upper-lower inclined ABP group had a greater incisal and ramus angle. Furthermore, lower incisor (Li)-condyle (Co) mandibular points increased significantly more in the upper-lower inclined ABP group than in the control group.
CONCLUSION
According to this study, various forms of ABP may have an impact on the TMJ and mandibular morphology, specifically on the length, angulation, and superficial surface of the condyle.
PubMed: 37823082
DOI: 10.1016/j.sdentj.2023.06.002 -
Cureus Nov 2023Mandibular advancement devices (MADs) remain a popular non-invasive treatment modality for the management of obstructive sleep apnea (OSA). However, the occlusal side... (Review)
Review
Mandibular advancement devices (MADs) remain a popular non-invasive treatment modality for the management of obstructive sleep apnea (OSA). However, the occlusal side effects from long-term therapy may result in poor patient compliance and patient drop-outs. Hence, knowledge of the possible side effects of these devices on occlusion is necessary. This article attempts to systematically review the evidence available in support of the possible long-term effects of mandibular advancement therapy on occlusion in adult sleep apnea patients. A detailed search was conducted for unpublished and published literature and their references in various electronic databases. A grey literature search was also performed. Studies until June 30, 2022, were selected. Randomized controlled trials, non-randomized trials, and cohort studies investigating the occlusal side effects of MADs for the treatment of snoring or OSA with a follow-up of at least four years were included. Study selection, data extraction, and risk of bias assessment were performed individually and in duplicate. The risk of bias was assessed by Cochrane tools for randomized and non-randomized studies. Fourteen studies were selected for the final qualitative analysis. The side effects reported were upper incisor retroclination, lower incisor proclination, decreased overjet and overbite, and change in the total occlusal contact area. The review concludes that long-term MAD therapy has statistically and clinically significant effects on occlusion.
PubMed: 38090465
DOI: 10.7759/cureus.48682