-
Journal of the Mechanical Behavior of... Sep 2023The purpose of this systematic review and meta-analysis was to compare the results of tribocorrosion in titanium alloys of dental implants submitted to surface treatment... (Meta-Analysis)
Meta-Analysis Review
The purpose of this systematic review and meta-analysis was to compare the results of tribocorrosion in titanium alloys of dental implants submitted to surface treatment with those whose treatment was not performed. An electronic search was carried out on the MEDLINE (PubMed), Web of Science, Virtual Health Library and Scopus databases. The search strategy used was PECO: Participants (P): titanium alloys; Exposure (E): surface treatment; Comparison (C): absence of surface treatment; and Result/Outcome (O): tribocorrosion. The search found a total of 336 articles, where 27 was selected by title or abstract, resulted to 10 after reading in full. The treatments that formed the rutile layer had better tribological results and therefore better protected the material from mechanical and chemical degradation, contrary to the technique with the addition of nanotubes. It was concluded that the surface treatment proves to be efficient to protect metals from mechanical and chemical wear.
Topics: Humans; Alloys; Titanium; Corrosion; Dental Implants; Surface Properties
PubMed: 37423010
DOI: 10.1016/j.jmbbm.2023.106008 -
Frontiers in Bioscience (Landmark... Dec 2021The fracture of endodontic instruments inside the canal represents a problem that is not always easy to solve. The reutilization of endodontic instruments after... (Meta-Analysis)
Meta-Analysis Review
The fracture of endodontic instruments inside the canal represents a problem that is not always easy to solve. The reutilization of endodontic instruments after sterilization procedures raises the question of how these processes affect their physical and mechanical properties. Alterations can involve the surface of the instruments, as well as their cutting effectiveness, shape and resistance to torsional and cyclic fatigue. The methodology adopted for this systematic review followed the PRISMA guidelines for systematic reviews. The following search terms were used in PubMed and Scopus: "endodontic sterilization", "endodontic autoclave", "cyclic fatigue", "torsional", "cutting efficiency", "sterilization", "surface characteristics" and "corrosion". After the screening phase, the application of exclusion criteria and the removal of duplicates, 51 studies were identified and divided into four outcomes: cyclic fatigue; deformation and torsional fatigue; corrosion or surface alterations; and cutting efficiency. Our study of the scientific literature highlights disagreements between studies on these effects. After autoclaving, instruments exhibit a reduction in the cutting efficiency, but NiTi alloy instruments have an improved resistance to cyclic and torsional fatigue.
Topics: Equipment Failure; Materials Testing; Network Meta-Analysis; Root Canal Preparation; Sterilization; Stress, Mechanical
PubMed: 34994183
DOI: 10.52586/5062 -
The Journal of Prosthetic Dentistry Oct 2022Infections associated with bacterial biofilm formation are an important cause of early implant failure. With the growing number of antibiotic-resistant bacteria, the... (Review)
Review
STATEMENT OF PROBLEM
Infections associated with bacterial biofilm formation are an important cause of early implant failure. With the growing number of antibiotic-resistant bacteria, the incorporation of zinc into TiO coatings of titanium implants has emerged to promote osseointegration and inhibit bacterial proliferation. However, a systematic assessment of its efficacy is lacking.
PURPOSE
The purpose of this systematic review and meta-analysis was to assess the bactericidal effect of zinc-modified TiO coatings on titanium or Ti-6Al-4V alloy.
MATERIAL AND METHODS
The review was structured based on the preferred reporting items for systematic reviews and meta-analyses (PRISMA) checklist and the peer review of electronic search strategies (PRESS) guidelines. The search was performed in Science Direct, SCOPUS, Web of Science, and PubMed databases, including experimental in vitro studies that used titanium or Ti-6Al-4V as a control group and performed bacterial assays. Meta-analysis was performed by using the standardized mean differences of antibacterial effects.
RESULTS
A total of 2519 articles were collected after duplicate removal. Then, eligibility criteria and a manual search were applied to select 20 studies for qualitative analysis and 16 studies for statistical analysis. The risk of bias revealed low-quality evidence. The meta-analysis showed that zinc positively affected the bactericidal activity of TiO coatings (-8.79, CI=-11.01 to -6.57, P<.001), with a high degree of heterogeneity (I=78%). Subgroup analysis with TiO nanotubes produced by anodization and ZnO nanoparticles by hydrothermal synthesis reduced heterogeneity to 43%, with the removal of outliers (I=46%), with a favorable antibacterial effect for zinc incorporation into TiO.
CONCLUSIONS
Bactericidal activity was identified for zinc incorporated into TiO coatings, making it an interesting option for titanium dental implants.
PubMed: 36270807
DOI: 10.1016/j.prosdent.2022.05.007 -
PeerJ 2022Titanium dioxide dental implants have a controversial effect on reactive oxygen species (ROS) production. ROS is necessary for cellular signal transmission and proper... (Meta-Analysis)
Meta-Analysis
BACKGROUND
Titanium dioxide dental implants have a controversial effect on reactive oxygen species (ROS) production. ROS is necessary for cellular signal transmission and proper metabolism, but also has the ability to cause cell death as well as DNA, RNA, and proteins damage by excessive oxidative stress. This study aimed to systematically review the effect of titanium dioxide dental implant-induced oxidative stress and its role on the osteogenesis-angiogenesis coupling in bone remodeling.
METHODS
This systematic review was performed conforming to preferred reporting items for systematic review and meta-analysis (PRISMA) model. Four different databases (PubMed, Science Direct, Scopus and Medline databases) as well as manual searching were adopted. Relevant studies from January 2000 till September 2021 were retrieved. Critical Appraisal Skills Programme (CASP) was used to assess the quality of the selected studies.
RESULTS
Out of 755 articles, only 14 which met the eligibility criteria were included. Six studies found that titanium dioxide nanotube (TNT) reduced oxidative stress and promoted osteoblastic activity through its effect on Wnt, mitogen-activated protein kinase (MAPK) and forkhead box protein O1 (FoxO1) signaling pathways. On the other hand, three studies confirmed that titanium dioxide nanoparticles (TiONPs) induce oxidative stress, reduce ostegenesis and impair antioxidant defense system as a significant negative correlation was found between decreased SIR3 protein level and increased superoxide (O ). Moreover, five studies proved that titanium implant alloy enhances the generation of ROS and induces cytotoxicity of osteoblast cells via its effect on NOX pathway.
CONCLUSION
TiONPs stimulate a wide array of oxidative stress related pathways. Scientific evidence are in favor to support the use of TiO nanotube-coated titanium implants to reduce oxidative stress and promote osteogenesis in bone remodeling. To validate the cellular and molecular cross talk in bone remodeling of the present review, well-controlled clinical trials with a large sample size are required.
Topics: Reactive Oxygen Species; Titanium; Dental Implants; Oxidative Stress; Bone Remodeling
PubMed: 35261818
DOI: 10.7717/peerj.12951 -
Heliyon Dec 2022Critically analyzed the existing literature to answer the question "What is the influence of roughness of surfaces for dental implants obtained by additive manufacturing...
OBJECTIVE
Critically analyzed the existing literature to answer the question "What is the influence of roughness of surfaces for dental implants obtained by additive manufacturing compared to machined on osteoblastic cell adhesion and proliferation?"
DESIGN
This systematic review followed the guidelines of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) and was registered in the Open Science Framework. The personalized search strategy was applied to Embase, Pub Med, Scopus, and Science Direct databases and Google Scholar and ProQuest grey literature. The selection process was carried out in two stages independently by two reviewers according to the eligibility criteria. The risk of bias was analyzed using a checklist of important parameters to be considered.
RESULTS
When applying the search strategy on databases 223 articles were found, after removing the duplicates, 171 were analyzed by title and abstract of which 25 were selected for full reading, of these, 6 met the eligibility criteria. 2 studies were included from the reference list totaling 8 articles included in this systematic review and none were included from the Grey Literature. 7 had a low risk of bias and 1 moderate.
CONCLUSIONS
1) Roughness is a property that must be analyzed and correlated with the chemical composition, intrinsic to the alloy and resulting from the surface treatment; morphology of topographic peaks and valleys; printing technique and its parameters; 2) Need for more studies on the biomolecular level to elucidate the mechanism by which the roughness and the morphology of topographical peaks and valleys descriptive of roughness influence osteoblastic adhesion and proliferation.
PubMed: 36643331
DOI: 10.1016/j.heliyon.2022.e12505 -
The Journal of Prosthetic Dentistry Nov 2022Given the wide use of cobalt-chromium (Co-Cr) alloys, especially for removable partial dentures, and the importance of chemical solutions to complement the cleaning of... (Review)
Review
STATEMENT OF PROBLEM
Given the wide use of cobalt-chromium (Co-Cr) alloys, especially for removable partial dentures, and the importance of chemical solutions to complement the cleaning of dental prostheses, safe disinfection products should be identified for the regular decontamination of Co-Cr dental prostheses.
PURPOSE
The purpose of this systematic review of in vitro studies was to determine the effects on the properties of Co-Cr dental alloys of the various chemical agents used to clean dental prostheses.
MATERIAL AND METHODS
In vitro studies were included based on a literature search conducted in March 2022 in the Medline/PubMed, SCOPUS, Web of Science, Virtual Health Library, and Embase databases. Independent reviewers performed the search, selection, extraction, and analysis of the data. The review was performed based on the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) guidelines. The quality of the included articles was evaluated by using parameters adapted from the Consolidated Standards of Reporting Trials (CONSORT) guidelines, and the risk of bias analysis was performed based on previous studies.
RESULTS
Among the 15 included studies, the chemical agents evaluated were alkaline peroxides and hypochlorites, mouthwashes containing cetylpyridinium chloride and chlorhexidine, diluted acids, and enzymes. Some peroxides produced increased ion release, surface roughness, and mass loss of the alloys. The hypochlorites were responsible for the greatest surface corrosion, yielding dark stains, rough regions, and depressions. Acetic and peracetic acids and mouthwashes containing chlorhexidine and cetylpyridinium did not produce significant changes in Co-Cr alloys. Most studies presented moderate risk of bias.
CONCLUSIONS
According to the included studies, mouth rinses containing cetylpyridinium chloride or chlorhexidine and solutions with acetic and peracetic acid could be safely used to chemically sanitize Co-Cr prostheses. Alkaline peroxides should be used with caution, and alkaline hypochlorite solutions should be avoided.
PubMed: 36357193
DOI: 10.1016/j.prosdent.2022.09.013 -
The Cochrane Database of Systematic... Jul 2019Management of individuals presenting with partial loss of teeth is a common task for dentists. Outcomes important to the management of missing teeth in the partially... (Review)
Review
BACKGROUND
Management of individuals presenting with partial loss of teeth is a common task for dentists. Outcomes important to the management of missing teeth in the partially absent dentition should be systematically summarized. This review recognizes both the challenges associated with such a summarization and the critical nature of the information for patients.
OBJECTIVES
To assess the effects of different prostheses for the treatment of partially absent dentition in terms of the following outcomes: long-term success, function, morbidity and patient satisfaction.
SEARCH METHODS
We searched the Cochrane Oral Health Group's Trials Register (to 21 March 2011), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2011, Issue 1), MEDLINE via OVID (1950 to March 2011) and EMBASE via OVID (1980 to March 2011). There were no restrictions regarding language or date of publication. We contacted several authors to identify non-published trials.
SELECTION CRITERIA
Randomized controlled trials (RCTs) comparing different methods (including the design and materials used) of treating partial edentulism, with clinically relevant outcomes, were included in this review. Trials reporting only surrogate outcomes, such as plaque accumulation or gingival volume, were excluded from this review.
DATA COLLECTION AND ANALYSIS
Two review authors independently carried out the screening of eligible studies, assessment of dimensions of quality of trials, and data extraction. Results were expressed as mean differences for continuous data, risk ratios for dichotomous outcomes, and hazard ratios with 95% confidence intervals for time-to-event data.
MAIN RESULTS
Twenty-one trials met the inclusion criteria for this review. Twenty-four per cent of these were assessed as being at high risk of bias and the remainder were at unclear risk of bias. The clinical heterogeneity among the included studies precluded any attempt at meta-analysis. There was insufficient evidence to determine whether one type of removable dental prosthesis (RDP) was better or worse than another. With fixed dental prostheses (FDPs), there was no evidence that high gold alloys are better or worse than other alloys, nor that gold alloys or frameworks are better or worse than titanium. There is insufficient evidence to determine whether zirconia is better or worse that other FDP materials, that ceramic abutments are better or worse than titanium, or that one cement was better or worse than another in retaining FDPs. There is insufficient evidence to determine the relative effectiveness of FDPs and RDPs in patients with shortened dental arch or to determine the relative advantages of implant supported FDPs versus tooth/implant supported FDPs.
AUTHORS' CONCLUSIONS
Based on trials meeting the inclusion criteria for this review, there is insufficient evidence to recommend a particular method of tooth replacement for partially edentulous patients.
PubMed: 31425605
DOI: 10.1002/14651858.CD003814.pub3 -
European Journal of Orthodontics Mar 2022The aim of this systematic review was to compare the different force delivery systems for orthodontic space closure by sliding mechanics. (Meta-Analysis)
Meta-Analysis
BACKGROUND/OBJECTIVES
The aim of this systematic review was to compare the different force delivery systems for orthodontic space closure by sliding mechanics.
SEARCH METHODS
Multiple sources including Cochrane Central, Ovid Medline, Embase etc. were used to identify all relevant studies.
SELECTION CRITERIA
Randomized controlled trials (RCT) of parallel-group and split-mouth designs were included.
PARTICIPANTS
Orthodontic patients of any age treated with fixed orthodontic appliances and requiring space closure.
DATA COLLECTION AND ANALYSIS
Search result screening, data extraction and quality assessment were performed independently and in duplicate by 2 reviewers. The included studies were grouped into parallel-arm and split-mouth studies and subgroup analysis was then performed for the type of retraction subsets; en-masse and individual canine retraction. A traditional meta-analysis, and network meta-analysis (NMA) for direct and indirect comparisons for the rate of space closure were performed.
RESULTS
Thirteen studies, six parallel-arm and seven split-mouth were included. The traditional meta-analysis comparing Nickel-titanium (NiTi) closed coil springs and elastomeric power chain for the rate of tooth movement showed statistically significant difference favouring NiTi springs (MD: 0.24; 95% CI, 0.03-0.45; I2 0%, P = 0.02) and the comparison between NiTi springs and active ligatures also showed statistically significant result favouring NiTi springs (MD: 0.53; 95% CI, 0.44-0.63; I2 0%, P ˂ 0.00001) for the rate of tooth movement. NMA for the rate of space closure showed fairly confident evidence for NiTi coil springs when compared with elastomeric chain and active ligatures. The NiTi coil spring ranked best between all methods of space closure.
CONCLUSIONS
There is moderate quality evidence in favour of NiTi coil springs for the rate of space closure when compared with active ligature and low quality of evidence favouring NiTi springs when compared with elastomeric chain. The ranking from NMA showed NiTi coil springs to be the best method for space closure with 99% chance. An urgent need for standardization of study designs and the need for development of an agreed core outcome sets and core outcome instrument measurement sets is evident.
REGISTRATION
PROSPERO CRD42020157811.
Topics: Dental Alloys; Elasticity; Humans; Orthodontic Space Closure; Orthodontic Wires; Titanium; Tooth Movement Techniques
PubMed: 34609513
DOI: 10.1093/ejo/cjab047 -
Materials (Basel, Switzerland) Aug 2022The toxicological risk of Co-Cr dental alloys is actually a sensitive subject with the European regulatory changes, namely regulation (EU) 2017/745 and annex VI to the... (Review)
Review
The toxicological risk of Co-Cr dental alloys is actually a sensitive subject with the European regulatory changes, namely regulation (EU) 2017/745 and annex VI to the CLP regulation (EC) 1972/2008. : The objective of this review is to conduct a rigorous analysis of the cytocompatibility of cobalt-chromium (Co-Cr) dental alloys. Considering various parameters such as cytotoxicity, type IV hypersensitivity reaction, sensitization, and irritation, we investigated evidence of toxicity of Co-Cr in human dental applications. : Specific search strategies were performed in three electronic databases, namely , , and , using a main restriction in the search regarding the publication date (1995-2022). : Out of a total of 836 articles, only 21 studies were selected and analyzed according to PRISMA methodology. : Among them, 10 in vitro studies using human samples and 11 in vivo studies on human patients were distinguished. Most of the in vitro studies confirmed that Co-Cr alloys have a good cytocompatibility compared to Ni alloys. Regarding the in vivo studies, it appeared that Co-Cr could rarely cause sensitization, irritation, and allergic reactions. Reactions were mainly observed for people allergic to Co or Cr. Nevertheless, titanium-based materials showed better results. : This study proposes a new state of the art on Co-Cr dental alloys and will thus be very useful for carrying out additional studies. : This review will help practitioners in their daily clinical choice.
PubMed: 36079183
DOI: 10.3390/ma15175801 -
Gels (Basel, Switzerland) Jan 2024The aim of the presented systematic review is to update the state of knowledge and relate the properties and composition of fluoride gels to their potential application.... (Review)
Review
The aim of the presented systematic review is to update the state of knowledge and relate the properties and composition of fluoride gels to their potential application. This article aims to explore the effect of fluoride gel application on changes in the properties of dental biomaterials and tooth tissues. The review includes articles assessing studies on the effects of fluoride gel on dental tissues and materials. Employing the PRISMA protocol, a meticulous search was conducted across the PubMed, Scopus, and Web of Science databases, utilizing keywords such as fluoride, gel, and properties. The publications were selected without limitation by the year of publication, and then Cohen's κ test was used to assess the agreement of the respondents. Exclusion criteria included non-English studies, opinion pieces, editorial papers, letters to the editor, review articles and meta-analyses, clinical reports, studies lacking full-text accessibility, and duplicates. The quality of the chosen papers was assessed by two independent reviewers. A total of 2385 were located in databases, of which only 17 met the inclusion criteria. All publications showed increased surface mineralization, and seven studies showed the effect of fluoride gel on the surface of dental tissues. Three articles stated a negative effect of fluoride gels on titanium and stainless steel alloys and glass ionomer fillings. The effects on shear bond strength and plaque deposition require further investigation because the study results are contradictory.
PubMed: 38391429
DOI: 10.3390/gels10020098