-
European Journal of Paediatric Dentistry Dec 2021The aim of this systematic review was to evaluate the clinical outcome of partial pulpotomy, pulpotomy and pulpectomy for treating primary teeth with normal or infected...
AIM
The aim of this systematic review was to evaluate the clinical outcome of partial pulpotomy, pulpotomy and pulpectomy for treating primary teeth with normal or infected pulp or with irreversible pulpitis.
METHODS
Two reviewers on Pubmed and ISI Web of Science performed a comprehensive literature review of publications from 1966 until July 2019. Pico outline was used to facilitate literature research. Among abstracts, publications were selected according to the following criteria: prospective clinical study, correct indication for the performed treatment, clear definition of clinical and/or radiographic success criteria and at least 6-month follow-up period. The strict selection criteria under the keywords "pulpotomy", "partial pulpotomy" and "pulpectomy" resulted in a limited amount of randomised controlled trials (RCT) or controlled clinical trials (CT). Qualitative assessment of the selected clinical studies and level of evidence was included according to the criteria described by the Oxford Centre for Evidence-Based Medicine (CEBM).
CONCLUSION
Prerequisites for a successful pulpotomy are symptom-free teeth, sterile removal of coronal pulp and haemostasis. Both MTA and formocresol perform well for partial pulpotomies after caries exposure. Formocresol had been the most popular amputation material for pulpotomies. Due to the potential side effects, other medicaments, such as ferric sulfate, mineral trioxide aggregate (MTA) or NaOCl are suggested. Grey and white MTA yeld the same results. Lasers are not recommended due to their large diversity. Regarding pulpectomy, the conditions, procedures, and evaluation for the treatment were not well defined in the studies. Nevertheless, there is evidence to use calcium hydroxide, zinc oxide eugenol paste or iodoform based pastes as root filling materials for non-vital molars. Pulpectomies showed better success rates than pulpotomies. Stainless steel crowns are recommended as definite restorations after both endodontic treatments. Longer follow-up periods, further clinical studies with comparable conditions and clear definition of evaluation criteria are needed to further confirm the results of endodontic treatment in primary teeth.
Topics: Calcium Compounds; Drug Combinations; Humans; Molar; Oxides; Pulpectomy; Pulpotomy; Silicates; Tooth, Deciduous; Treatment Outcome; Zinc Oxide-Eugenol Cement
PubMed: 35034465
DOI: 10.23804/ejpd.2021.22.04.4 -
Dental Materials : Official Publication... Dec 2021The aim of this systematic review and meta-analysis was to compare the bond strength between eroded and sound permanent enamel and dentin and to assess whether bonding... (Meta-Analysis)
Meta-Analysis
OBJECTIVE
The aim of this systematic review and meta-analysis was to compare the bond strength between eroded and sound permanent enamel and dentin and to assess whether bonding performance (immediate and after aging) differs between etch&rinse and self-etch adhesives and can be improved by surface pretreatment prior to bonding.
METHODS
Electronic databases (PubMed, Scopus, Embase, Web of Science, CENTRAL, LILACS, BBO) were searched by two reviewers. Random-effect meta-analyses were performed to compare bond strength to sound and eroded dental hard tissues without and with surface pretreatment prior to bonding, respectively. The effect of adhesive mode (etch&rinse vs. self-etch) and aging (immediate vs. aged) was compared using subgroup analyses. Statistical heterogeneity was assessed using Cochran's Q and I-statistic. Funnel plots and Egger's regression intercept tests were used to evaluate publication bias. Quality and risk of bias of included studies were also assessed.
RESULTS
Fourty-seven studies (45 in vitro, 2 in situ) were included in the systematic review and meta-analyses. Erosion impairs bond strength to dentin (p < 0.001; mean difference: -10.2 MPa [95%CI: -11.9 to -8.6 MPa]), but not to enamel (p = 0.260). Surface pretreatment measures removing or stabilizing the collagenous matrix can improve dentin bond strength (maximum mean difference: +12.4 MPa). Etch&rinse and self-etch adhesives did not perform significantly different on eroded enamel (p = 0.208) and dentin (p = 0.353). The majority of studies (32 of 47) presented a medium risk of bias.
SIGNIFICANCE
Data from in vitro and in situ studies showed that erosion impairs dentin bonding of etch&rinse and self-etch adhesives and makes surface pretreatment prior to bonding of composite restorations necessary.
Topics: Dental Bonding; Dental Cements; Dental Enamel; Dentin; Dentin-Bonding Agents; Materials Testing; Resin Cements
PubMed: 34593245
DOI: 10.1016/j.dental.2021.09.014 -
Materials (Basel, Switzerland) May 2021This systematic review aims to evaluate the different pretreatments of the zirconia surface and resin cement in order to determine a valid operative protocol for... (Review)
Review
This systematic review aims to evaluate the different pretreatments of the zirconia surface and resin cement in order to determine a valid operative protocol for adhesive cementation. Methodologies conducted for this study followed the Prisma (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) guidelines. An electronic search was performed in four databases. The established focus question was: "What type of surface conditioning method is the one that obtains the best adhesion values to zirconia over time by applying a resin cement?" Forty-five relevant papers were found to qualify for final inclusion. In total, 260 different surface pretreatment methods, mainly combinations of air-abrasion protocols and adhesive promoters, were investigated. Altogether, the use of two artificial aging methods, three types of cement and four testing methods was reported. The results showed that mechanicochemical surface pretreatments offered the best adhesive results. Self-adhesive cement and those containing 10-MDP obtained the best results in adhesion to zirconia. Artificial aging reduced adhesion, so storage in water for 30 days or thermocycling for 5000 cycles is recommended. A standardized adhesive protocol has not been established due to a lack of evidence.
PubMed: 34067501
DOI: 10.3390/ma14112751 -
Dentistry Journal Aug 2019Reliable bonding between resin composite cements and high strength ceramics is difficult to achieve because of their chemical inertness and lack of silica content that... (Review)
Review
Reliable bonding between resin composite cements and high strength ceramics is difficult to achieve because of their chemical inertness and lack of silica content that makes etching impossible. The purpose of this review is to classify and analyze the existing methods and materials suggested to improve the adhesion of zirconia to dental substrate by using composite resins, in order to explore current trends in surface conditioning methods with predictable results. The current literature, examining the bond strength of zirconia ceramics, and including in vitro studies, clinical studies, and a systematic review, was analyzed. The research in the literature was carried out using PubMed and Cochrane Library databases, only papers in English, published online from 2013 to 2018. The following keywords and their combinations were used: Zirconia, 3Y-TZP, Adhesion, Adhesive cementation, Bonding, Resin, Composite resin, Composite material, Dentin, Enamel. Research, in PubMed and Cochrane Library databases, provided 390 titles with abstracts. From these, a total of 93 publications were chosen for analysis. After a full text evaluation, seven articles were discarded. Therefore, the final sample was 86, including in vitro, clinical studies, and one systematic review. Various adhesive techniques with different testing methods were examined. Airborne-particle abrasion and tribo-chemical silica coating are the pre-treatment methods with more evidence in the literature. Increased adhesion could be expected after physico-chemical conditioning of zirconia. Surface contamination has a negative effect on adhesion. There is no evidence to support a universal adhesion protocol.
PubMed: 31374820
DOI: 10.3390/dj7030074 -
Clinical Oral Implants Research Jan 2022To analyze the clinical outcomes of all-ceramic single crowns (SCs) and fixed dental prostheses (FDPs) supported by ceramic implants. (Meta-Analysis)
Meta-Analysis Review
OBJECTIVE
To analyze the clinical outcomes of all-ceramic single crowns (SCs) and fixed dental prostheses (FDPs) supported by ceramic implants.
MATERIALS AND METHODS
Based on a focused question and customized PICO framework, electronic (Medline/EMBASE/Cochrane) and manual searches for studies reporting the clinical outcomes of all-ceramic SCs and FDPs supported by ceramic implants ≥12 months were performed. The primary outcomes were reconstruction survival and the chipping proportion. The secondary outcomes were implant survival, technical complications, and patient-related outcome measurements. Meta-analyses were performed after 1, 2, and 5 years using random-effect meta-analyses.
RESULTS
Eight of the 1,403 initially screened titles and 55 full texts were included. Five reported on monolithic lithium disilicate (LS2) SCs, one on veneered zirconia SCs, and two on veneered zirconia SCs and FDPs, which reported all on cement-retained reconstructions (mean observation: 12.0-61.0 months). Meta-analyses estimated a 5-year survival rate of 94% (95% confidence interval [CI]: 82%-100%) for overall implant survival. Reconstruction survival proportions after 5 years were: monolithic LS2, 100% (95%CI: 95%-100%); veneered zirconia SCs, 89% (95%CI: 62%-100%); and veneered zirconia FDPs 94% (95%CI: 81%-100%). The chipping proportion after 5 years was: monolithic LS2, 2% (95%CI: 0%-11%); veneered zirconia SCs, 38% (95%CI: 24%-54%); and veneered zirconia FDPs, 57% (95%CI: 38%-76%). Further outcomes were summarized descriptively.
CONCLUSIONS
Due to the limited data available, only tendencies could be identified. All-ceramic reconstructions supported by ceramic implants demonstrated promising survival rates after mid-term observation. However, high chipping proportions of veneered zirconia SCs and, particularly, FDPs diminished the overall outcome. Monolithic LS2 demonstrated fewer clinical complications. Monolithic reconstructions could be a valid treatment option for ceramic implants.
Topics: Ceramics; Crowns; Dental Implants; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Humans; Metal Ceramic Alloys; Zirconium
PubMed: 34665900
DOI: 10.1111/clr.13871 -
Journal of Esthetic and Restorative... Jan 2022Several systematic literature reviews have assessed the scientific evidence on resin bonding protocols to conventional 3 mol% ytrria-stabilized zirconia (3Y-TZP)... (Review)
Review
OBJECTIVES
Several systematic literature reviews have assessed the scientific evidence on resin bonding protocols to conventional 3 mol% ytrria-stabilized zirconia (3Y-TZP) ceramics. It has been widely discussed, however, that the differing composition and physical properties of new high-translucent zirconia generations (4Y-TZP and 5Y-TZP) may require alternative bonding materials and procedures. This paper reviewed in vitro studies on the success and durability of bonding protocols to high-translucent zirconia.
MATERIAL AND METHODS
A systematic search of PubMed and Cochrane Library for in vitro studies on bonding to new zirconia generations published until November 2020 was conducted and complemented by a manual search. Studies selected for review fulfilled the applied inclusion and exclusion criteria. The quality of the included studies was assessed with the Cochrane risk-of-bias tool for randomized trials.
RESULTS
Of 629 screened articles, 18 were included in this review. They investigated different surface pretreatment methods, primers, resin cements, aging procedures, and bond strength test protocols. The limited number of the identified studies and the heterogeneity of the extracted data did not allow to conduct a meta-analysis.
CONCLUSIONS
The available evidence suggests that resin bonding protocols successfully applied to conventional zirconia are also the most successful for high-translucent zirconia. Airborne particle abrasion and special phosphate monomer-containing primers or composite resin cements provide long-term durable resin bonds.
CLINICAL SIGNIFICANCE
Durable bonds can be established between high-translucent zirconia and resin cements. The bonding materials and procedures applied do not compromise their physical properties.
Topics: Ceramics; Dental Bonding; Dental Stress Analysis; Materials Testing; Resin Cements; Surface Properties; Zirconium
PubMed: 35072329
DOI: 10.1111/jerd.12876 -
Journal of the American Dental... Feb 2023The goal of restoring caries lesions is to protect the pulp, prevent progression of the disease process, and restore the form and function of the tooth. The purpose of... (Meta-Analysis)
Meta-Analysis Review
BACKGROUND
The goal of restoring caries lesions is to protect the pulp, prevent progression of the disease process, and restore the form and function of the tooth. The purpose of this systematic review was to determine the effect of different direct restorative materials for treating cavitated caries lesions on anterior and posterior primary and permanent teeth.
TYPE OF STUDIES REVIEWED
The authors included parallel and split-mouth randomized controlled trials comparing the effectiveness of direct restorative materials commercially available in the United States placed in vital, nonendodontically treated primary and permanent teeth. Pairs of reviewers independently conducted study selection, data extraction, and assessments of risk of bias and certainty of the evidence using the Grading of Recommendations Assessment, Development and Evaluation approach. The authors conducted pair-wise meta-analyses to summarize the evidence and calculated measures of association and their 95% CIs.
RESULTS
Thirty-eight randomized controlled trials were eligible for analysis, which included data on Class I and Class II restorations on primary teeth and Class I, Class II, Class III, Class V, and root surface restorations on permanent teeth. Included studies assessed the effect of amalgam, resin composite, compomer, conventional glass ionomer cement, resin-modified glass isomer cement, and preformed metal crowns. Moderate to very low certainty evidence suggested varying levels of effectiveness across restorative materials.
CONCLUSIONS AND PRACTICAL IMPLICATIONS
Owing to a relatively low event rate across various outcomes indicating restoration failure, there was limited evidence to support important differences between direct restorative materials used in practice.
Topics: United States; Humans; Dental Restoration, Permanent; American Dental Association; Dental Caries Susceptibility; Dental Materials; Dental Caries; Composite Resins; Tooth, Deciduous; Glass Ionomer Cements
PubMed: 36610925
DOI: 10.1016/j.adaj.2022.09.012 -
Dental Materials : Official Publication... Oct 2021The purpose of this systematic review and meta-analysis was to analyze the literature on the bond strength of self-etching (SE) adhesives containing 10-MDP or other... (Meta-Analysis)
Meta-Analysis Review
OBJECTIVE
The purpose of this systematic review and meta-analysis was to analyze the literature on the bond strength of self-etching (SE) adhesives containing 10-MDP or other acidic functional monomers, comparing the bonding performance of both compositions.
METHODS
This study is registered in PROSPERO (CRD42020175715) and it followed the PRISMA Statement. The literature search was performed in PubMed, Web of Science, SciELO, Scopus, LILACS, IBECS, and BBO from the starting coverage date through 30 June 2021. Study eligibility criteria consisted of in vitro studies that evaluated the bond strength (microtensile, microshear, tensile or shear testing) to sound dentin/enamel of a minimum of two distinct SE systems, with at least one material containing 10-MDP and one other being comprised of a distinct acidic composition. Statistical analyses were carried out with RevMan 5.3.5 and using random-effects models with the significance level at p < 0.05. Also, Bayesian network meta-analysis (NMA) was conducted using MetaInsight V3 tool.
RESULTS
From 740 relevant studies evaluated in full-text analysis, 210 were incorporated to the systematic review and 206 in meta-analysis. The majority of studies was classified as having medium risk of bias (56.7%), followed by low (35.2%) and high (8.1%) risk of bias. Data from a total of 64 adhesive systems were collected, which favored the 10-MDP-based group at both dentin (overall effect: 6.98; 95% CI: 5.61, 8.36; p < 0.00001) and enamel (overall effect: 2.79; 95% CI: 1.62, 3.96; p < 0.00001) substrates. Microtensile testing was more frequently used (73.4%) in the included studies. Adhesives based on 10-MDP showed greater bonding performance than adhesives comprised of monomers such as PENTA, 6-MHP, 4-META, 4-MET, pyrophosphate esters, mixed composition or monomers derived from sulfonic acid (p ≤ 0.01); whereas similar bond strength values were verified between 10-MDP-based materials and those containing PEM-F, acrylamide phosphates, 4-AET, MAC-10, or monomers derived from polyacrylic and phosphonic acids (p ≥ 0.05). Adhesives based on GPDM were the only ones that resulted in greater bonding potential than the 10-MDP-based group (p = 0.03). Dental bonds in dentin were favored with the application of 2-step 10-MDP-based adhesives; whereas in enamel the dental bonds were favored for both 2-steps versions of adhesives, regardless of the presence of 10-MDP. Indirect evidence from NMA revealed that 1-step 10-MDP-free and universal 10-MDP-free adhesives seemed to perform worst in dentin and enamel, respectively.
SIGNIFICANCE
Adhesives containing 10-MDP showed higher bonding performance than materials formulated with other acidic ingredients, although this result relied on the type of mechanical testing, type of the substrate, acidic composition of the adhesive, and the application category of the SE system. This review summarized the effects of the foregoing factors on the adhesion to dental substrates.
Topics: Bayes Theorem; Dental Bonding; Dental Cements; Dentin; Dentin-Bonding Agents; Materials Testing; Methacrylates; Resin Cements; Tensile Strength
PubMed: 34456050
DOI: 10.1016/j.dental.2021.08.014 -
Pediatric Dentistry Jul 2020The purpose of this systematic review and meta-analysis was to assess success rates for nonvital treatment in primary teeth for caries/trauma. Databases were searched... (Meta-Analysis)
Meta-Analysis
The purpose of this systematic review and meta-analysis was to assess success rates for nonvital treatment in primary teeth for caries/trauma. Databases were searched between 1960 and 2020 for randomized controlled trials, cohorts, case series, and in vitro studies. The primary outcome was overall success (clinical and radiographic) for pulpectomy and lesion sterilization tissue repair (LSTR). Included articles were independently determined, agreed upon, data extraction assessed, risk of bias, meta-analyses, and assignment of quality of evidence (GRADE). Comparing teeth with and without root resorption, pulpectomy success was better (P<0.001) in teeth without preoperative root resorption. Success with pulpectomies performed with zinc oxide eugenol [ZOE] and with Endoflas (ZOE plus iodoform plus calcium hydroxide) did not differ from that observed using Vitapex or Metapex (iodoform plus calcium hydroxide; P0.50) after 18 months; however, Endoflas and ZOE success rates remained near 90 percent versus 71 percent or less for iodoform. Network analysis ratings showed Endoflas and ZOE performed better than iodoform alone. Also, LSTR performed better (P<0.001) than pulpectomies in teeth with preoperative root resorption, but pulpectomy results were superior (P=0.09) if roots were intact. Rotary instrumentation of root canals was significantly faster (P<0.001) than manual instrumentation. Success rates were not impacted by method of obturation or root length determination, type of tooth, number of visits, irrigants, smear layer removal, or timing/type of final restoration. Eighteen-month success rates support Endloflas and zinc oxide eugenol pulpectomies over iodoform pulpectomies. Lesion sterilization tissue repair had limited indication for teeth with resorbed roots.
Topics: Calcium Hydroxide; Dental Caries; Humans; Pulpectomy; Root Canal Filling Materials; Root Resorption; Tooth, Deciduous; Zinc Oxide-Eugenol Cement
PubMed: 32847665
DOI: No ID Found -
Journal of Oral Rehabilitation Oct 2019To compare the treatments used to treat dentin hypersensitivity (DH), based on its efficacy and effect duration. (Review)
Review
OBJECTIVES
To compare the treatments used to treat dentin hypersensitivity (DH), based on its efficacy and effect duration.
METHODS
Medline/PubMed, Cochrane Library, EMBASE and ClinicalTrials were searched for articles published between 1 January 2008 and 14 November 2018, in English, Portuguese or Spanish, reporting clinical trials, completed and with results. This systematic review protocol was registered in PROSPERO, number CRD42019121986.
RESULTS
Seventy-four randomised clinical trials were included in the systematic review, reporting patients from 16 to 65 years old, with a clinical diagnosis of DH, that evaluate the efficacy of a desensitising product, compared to pre-treatment, used the evaporative method stimulation and the visual analogue scale. These studies evaluated 5366 patients and at least 9167 teeth. Seven follow-up periods were considered corresponding to an immediate, medium or long-time effect. Sixty-six studies were included in the quantitative synthesis. Glutaraldehyde with HEMA, glass ionomer cements and Laser present significant immediate (until 7 days) DH reduction. Medium-term (until 1 month) reduction was observed in stannous fluoride, glutaraldehyde with HEMA, hydroxyapatite, glass ionomer cements and Laser groups. Finally, long-term significant reduction was seen at potassium nitrate, arginine, glutaraldehyde with HEMA, hydroxyapatite, adhesive systems, glass ionomer cements and LASER.
CONCLUSIONS
All active ingredients show efficacy in DH reduction in different follow-up times. Only in-office treatments are effective in immediate DH reduction, maintaining its efficacy over time. For long-time effects, at-home treatments can also be used. More standardised evaluation protocols should be implemented to increase the robustly of the results.
Topics: Adolescent; Adult; Aged; Dentin; Dentin Desensitizing Agents; Dentin Sensitivity; Follow-Up Studies; Glass Ionomer Cements; Humans; Middle Aged; Treatment Outcome; Young Adult
PubMed: 31216069
DOI: 10.1111/joor.12842