-
The Journal of Prosthetic Dentistry Feb 2021The polycrystalline nature of zirconia hinders its ability to bond to tooth structure. Consequently, durable bonding to zirconia has been challenging. In vitro studies... (Review)
Review
STATEMENT OF PROBLEM
The polycrystalline nature of zirconia hinders its ability to bond to tooth structure. Consequently, durable bonding to zirconia has been challenging. In vitro studies have evaluated various methods of bonding to zirconia, but clinical data are sparse.
PURPOSE
The purpose of this systematic review was to critically appraise clinical studies investigating the survival rate of resin-bonded zirconia fixed partial dentures (FPDs), inlay-retained zirconia FPDs, and zirconia veneers.
MATERIAL AND METHODS
Searches were performed in MEDLINE, EMBASE, PubMed, Web of Science, Scopus, Cochrane Library, and Google Scholar. Clinical studies of over 12 months duration involving bonded zirconia restorations between 1990 and July 2018 were reviewed. All suitable studies were assessed for quality by using a "Questionnaire for selecting articles on Dental Prostheses".
RESULTS
Eight studies were ultimately included. Three studies examined posterior inlay-retained FPDs with estimated survival rates of 12.1% at 10 years, 95.8% at 5 years, and 100% at 20 months. Five studies reviewed anterior, resin-bonded FPDs, all of which had a 3- to 10-year survival rate of 100%. Debonds occurred in all studies, but the prostheses could usually be rebonded.
CONCLUSIONS
With correctly designed buccal and lingual coverage retainers and minimal if any veneering porcelain, zirconia-based, posterior, inlay-retained FPDs seem to have a high clinical survival rate. The role of bonding efficacy in this survival rate is unknown. Anterior, cantilevered, resin-bonded zirconia FPDs seem to have a high clinical survival rate. While these prostheses can debond, fracture of the entire prosthesis is unlikely, so they may be rebonded. To bond zirconia, the use of airborne-particle abrasion with 50-μm alumina (AlO) at 0.1 to 0.25 MPa in combination with a phosphate monomer-containing adhesive resin is recommended until further studies become available. Dental dam isolation is also recommended during zirconia bonding.
Topics: Dental Bonding; Dental Materials; Dental Porcelain; Denture Design; Denture, Partial, Fixed; Treatment Outcome; Zirconium
PubMed: 32115220
DOI: 10.1016/j.prosdent.2019.12.017 -
The Journal of Prosthetic Dentistry Feb 2021Removable partial dentures (RPDs) are traditionally made by casting, a complex, error-prone, and time-consuming process. Computer-aided design and computer-aided... (Review)
Review
STATEMENT OF PROBLEM
Removable partial dentures (RPDs) are traditionally made by casting, a complex, error-prone, and time-consuming process. Computer-aided design and computer-aided manufacturing (CAD-CAM) RPD systems may simplify the clinical steps and minimize errors; however, the accuracy of CAD-CAM RPD systems is unclear.
PURPOSE
The purpose of this systematic review was to determine whether CAD-CAM systems are accurate for the manufacturing of RPD frameworks.
MATERIAL AND METHODS
A literature search was conducted through Medline-PubMed, Scopus, Lilacs, Web of Science, and Cochrane Library databases using specific keywords for articles published up to November 2019. Three reviewers obtained data and compared the results. All studies evaluated the framework accuracy or fit of prostheses fabricated with conventional and digital techniques.
RESULTS
A total of 7 articles, 2 clinical studies, and 5 in vitro studies that complied with the inclusion criteria were evaluated. One in vitro study compared indirect (extraoral) and direct (intraoral) scanning for partially edentulous ridges and shows that digital scans were better than conventional impressions in terms of trueness. In the other studies included, although the frameworks analyzed had clinically acceptable discrepancies (<311 μm), the material influenced the fit. Polyetheretherketone (PEEK) showed better fit than traditional metal cast RPDs. Co-Cr alloy RPDs produced by rapid prototyping exhibited the highest discrepancies when produced by sintering laser melting.
CONCLUSIONS
The results show that the digital technique for RPD frameworks is accurate. In the studies included, the analyzed frameworks had clinically acceptable gaps, but the results were heterogeneous among studies because the articles used different measurement methods with small sample sizes. Few studies discussed the long-term clinical performance. The digital technique for RPD frameworks was accurate because the misfits and mismatches found in in vitro and clinical studies were within the acceptable clinical limit for RPDs.
Topics: Alloys; Computer-Aided Design; Denture, Partial, Removable; Humans; Lasers; Mouth, Edentulous
PubMed: 32147252
DOI: 10.1016/j.prosdent.2020.01.003 -
Journal of Clinical Periodontology Feb 2021To assess the effect of connective tissue graft (CTG) in terms of vertical mid-facial soft tissue change when applied at the buccal aspect following single immediate... (Meta-Analysis)
Meta-Analysis Review
OBJECTIVES
To assess the effect of connective tissue graft (CTG) in terms of vertical mid-facial soft tissue change when applied at the buccal aspect following single immediate implant placement (IIP).
MATERIALS AND METHODS
Two independent reviewers conducted an electronic literature search in PubMed, Web of Science, EMBASE and Cochrane databases as well as a manual search to identify eligible clinical studies up to January 2020. Randomized controlled trials (RCTs) and non-randomized controlled studies (NRSs) comparing IIP with CTG and without CTG over a mean follow-up of at least 12 months were included for a qualitative analysis. Meta-analyses were performed on data provided by RCTs.
RESULTS
Out of 1814 records, 5 RCTs and 3 NRSs reported on 409 (IIP + CTG: 246, IIP: 163) immediately installed implants with a mean follow-up ranging from 12 to 108 months. Only 1 RCT showed low risk of bias. Meta-analysis revealed a significant difference in terms of vertical mid-facial soft tissue change between IIP + CTG and IIP pointing to 0.41 mm (95% CI [0.21; 0.61], p < .001) in favour of soft tissue grafting. This outcome was clinically relevant since the risk for ≥1 mm asymmetry in mid-facial vertical soft tissue level was 12 times (RR 12.10, 95% CI [2.57; 56.91], p = .002) lower following IIP + CTG. Soft tissue grafting also resulted in a trend towards less bleeding on probing (MD 17%, 95% CI [-35%; 1%], p = .06). Meta-analyses did not reveal significant differences in terms of pink aesthetic score, marginal bone level change and probing depth. Results were inconclusive for horizontal mid-facial soft tissue change and papilla height change. Based on GRADE guidelines, a moderate recommendation for the use of a CTG following IIP can be made.
CONCLUSION
CTG contributes to mid-facial soft tissue stability following IIP. Therefore, CTG should be considered when elevated risk for mid-facial recession is expected in the aesthetic zone (thin gingival biotype, <0.5 mm buccal bone thickness).
Topics: Connective Tissue; Dental Implantation, Endosseous; Dental Implants; Dental Implants, Single-Tooth; Esthetics, Dental; Immediate Dental Implant Loading; Treatment Outcome
PubMed: 33125754
DOI: 10.1111/jcpe.13397 -
The International Journal of...To synthesize evidence derived from systematic reviews (SRs) on different interventions for rehabilitation of the edentulous maxilla with implant-supported restorations.
PURPOSE
To synthesize evidence derived from systematic reviews (SRs) on different interventions for rehabilitation of the edentulous maxilla with implant-supported restorations.
MATERIALS AND METHODS
A protocol-oriented search was established to address the PICO question: What is the current evidence regarding rehabilitation of the edentulous maxilla with different implant-supported prostheses in terms of implant and prosthesis survival? The primary outcomes were implant and prosthesis survival rates evaluated from SRs of clinical studies including adult patients with complete edentulism of the maxilla and comparing different implant-supported rehabilitation strategies. Methodologic quality of the SRs was assessed with the AMSTAR-2 tool.
RESULTS
The final selection process led to the inclusion of 36 SRs that were grouped as: (1) addressing maxillae with sufficient bone to place implants; (2) addressing maxillae with insufficient bone to place implants; and (3) comparing different types of prosthesis, number of implants, patient-reported outcomes, and economic evaluations. The literature describes four or more implants as suitable for full-arch fixed prostheses and implant-supported overdentures; in both cases, the overall survival rate is > 95%. Mini-implants present very high short-term failure rates (> 30%). Poor description of technical complications, adjustments, and maintenance and corresponding costs precluded a cost-effectiveness analysis.
CONCLUSION
No implant-supported rehabilitation of the edentulous maxilla (fixed or removable) should be supported on fewer than four implants. A one-piece full-arch fixed dental prosthesis can be supported by a minimum of two anterior axial plus two posterior distally tilted implants or by six to eight axial implants symmetrically distributed through the posterior and anterior regions of the arch. Four to six implants is the advised number to support an overdenture. The use of mini-implants in the maxilla is inadvisable.
Topics: Adult; Dental Implants; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Follow-Up Studies; Humans; Jaw, Edentulous; Maxilla; Mouth, Edentulous; Treatment Outcome
PubMed: 33571327
DOI: 10.11607/ijp.7162 -
Clinical Oral Investigations Jan 2022Address oral health-related quality of life (OHRQoL) and patient satisfaction rehabilitated by the all-on-four concept as the primary outcome. (Review)
Review
OBJECTIVE
Address oral health-related quality of life (OHRQoL) and patient satisfaction rehabilitated by the all-on-four concept as the primary outcome.
MATERIAL AND METHODS
A search was performed in the PubMed/MEDLINE, Web of Science, and Cochrane databases according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis criteria (PRISMA). The PICO question was used to address the following specific question: "What is the level of oral health-related quality of life and satisfaction in edentulous patients and with atrophic jaws who received dental implants for full-arch implant-supported restorations following the all-on-four in the mandible or maxilla?"
RESULTS
Eleven studies including 693 patients aged 55 to 71 years were selected. The shortest follow-up period was 3 months and the longest, 7 years. Regarding the OHRQoL assessment method and patient satisfaction, the oral health impact profile (OHIP) and the visual analog scale (VAS) were the most used.
CONCLUSION
OHRQoL and satisfaction in patients whose rehabilitation was based on the all-on-four concept were high. However, the current evidence is still limited by the quality of the available studies, making long-term randomized studies necessary to establish the real effectiveness of this surgical-prosthetic approach.
CLINICAL RELEVANCE
Carefully analyze the aspects related to satisfaction and oral health-related quality of life of rehabilitated patients with implant-supported total prostheses made according to the all-on-four concept, aiming to achieve success through procedures with greater predictability and less complexity, as these are directly associated with recovery oral health of edentulous individuals with less morbidity and minimized costs.
Topics: Dental Implants; Dental Prosthesis, Implant-Supported; Denture, Complete; Humans; Jaw, Edentulous; Patient Satisfaction; Personal Satisfaction; Quality of Life; Treatment Outcome
PubMed: 34647147
DOI: 10.1007/s00784-021-04213-y -
Dental Materials : Official Publication... Aug 2022The loss of the dental coronal portion following carious lesions or fractures leads to endodontic treatment with subsequent restoration to ensure correct anatomy and... (Meta-Analysis)
Meta-Analysis Review
OBJECTIVE
The loss of the dental coronal portion following carious lesions or fractures leads to endodontic treatment with subsequent restoration to ensure correct anatomy and function. Recently, partial adhesive restorations have been widely proposed to increase the survival rate of endodontically treated teeth. The primary purpose of this review is to assess the failure rate of indirect partial adhesive restorations on endodontically treated teeth (ETT), considering the follow-up period.
METHODS
The indications reported in the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) were used to draft the present review. The study was constructed on PICO questions: population (patients who need indirect adhesive restorative treatment on endodontically treated teeth with onlay and overlay), intervention (onlay and overlay), control (patients with onlay and overlay on endodontically treated teeth) and outcome (failure rate and types of failure for onlay and overlay). The asked scientific question was: what are the failure rate and types of failure for adhesive indirect partial restorations on ETT?
RESULTS
The overall failure rate that emerges is 0.087 with a ratio of 121/1254, I 80 % p-value< 0.001. Moreover, by meta-regression with covariates the follow-up period reports a coefficient of 0.013 with a P-value< 0.001. In conclusion, the indirect partial restorations on endodontically treated teeth displayed overall acceptable outcomes in terms of success from 2 to 4 years after their placement with only 4.32 % of failure. Failures increase after 7 years up to 12-30 years with failure rates of approximatively 10.65 % and 20.94 %. The analysis of the included articles reporting the causes of restorations failures showed that 15.51 % of cases were related to the loss of dental element.
SIGNIFICANCE
Besides the survival rates of indirect adhesive restorations on endodontically treated posterior teeth, it was highlighted that the majority of failures appeared restorable. Thus, partial restorations seemed able to prevent the ETT tooth loss.
Topics: Composite Resins; Dental Restoration Failure; Dental Restoration, Permanent; Humans; Inlays; Prognosis; Tooth, Nonvital
PubMed: 35835608
DOI: 10.1016/j.dental.2022.06.018 -
Operative Dentistry Jan 2021Composite resin or ceramic inlays, onlays, and overlays can achieve high long-term survival and success rates. (Meta-Analysis)
Meta-Analysis
CLINICAL RELEVANCE
Composite resin or ceramic inlays, onlays, and overlays can achieve high long-term survival and success rates.
Topics: Ceramics; Composite Resins; Dental Porcelain; Inlays
PubMed: 33882133
DOI: 10.2341/19-107-LIT -
Journal of Prosthodontic Research Jul 2022The purpose of this systematic review was to evaluate the survival rate, biological complications, technical complications, and clinical behavior of single crowns... (Meta-Analysis)
Meta-Analysis
PURPOSE
The purpose of this systematic review was to evaluate the survival rate, biological complications, technical complications, and clinical behavior of single crowns supported by teeth made up in monolithic zirconia with CAD/CAM technology.
STUDY SELECTION
An extensive electronic search was conducted through Medline/PubMed, Embase, and Cochrane Library databases. Additional manual search was performed on the references of included articles to identify relevant publications. Two reviewers independently performed the selection and electronic and manual search.
RESULTS
From nine articles included, there was a total of 594 participants and 1657 single-tooth restorations with a mean exposure time of 1.07 years, and follow-up period between 0.3 and 2.1 years. All studies showed a moderate level of quality, with a consequent moderate possibility of associated bias, using the Newcastle-Ottawa Scale (NOS), with survival rate (SR) ranging between 91% to 100%. Bleeding on probing (BOP) were reported with an average value of 29.12%. Marginal integrity showed high success rate values for the observation periods, except for one that included patients with bruxism which obtained a SR of 31.60%. Failures and/or fractures, mostly total and requiring replacement, were observed in three studies. Linear regression showed that there was no statistical correlation between survival rate and type of cementation and the average years of follow-up (p=0.730 e p=0.454). There was high heterogeneity between studies (I2 = 93.74% and Q = 79.672).
CONCLUSION
Within the limitation of this study, monolithic zirconia might be considered as a possible option for restoring single crowns, especially in the posterior zone.
Topics: Computer-Aided Design; Crowns; Dental Prosthesis Design; Dental Restoration Failure; Humans; Zirconium
PubMed: 34615842
DOI: 10.2186/jpr.JPR_D_21_00081 -
Clinical and Experimental Dental... Dec 2022This systematic review aims to investigate the effect of different preparation designs on the marginal fit and fracture strength of ceramic occlusal veneers. (Review)
Review
OBJECTIVES
This systematic review aims to investigate the effect of different preparation designs on the marginal fit and fracture strength of ceramic occlusal veneers.
MATERIALS AND METHODS
Based on the PICO question and the search terms, an electronic search was performed in Google Scholar, PubMed (MEDLINE), Scopus, Cochrane Library, Web of Science, Science Direct, Wiley, Ovid, and SAGE for articles published up to July 2022. After including English in vitro studies that evaluated posterior ceramic occlusal overlays at the posterior with ceramic restorations by following the PRISMA statement, the extracted data was tabulated. The methodological quality of the included studies was evaluated. Risk of bias assessment was done independently by two authors using the modified MINORS scale.
RESULTS
About 3138 search results were screened, of which 22 were selected due to their titles. Twenty-one full-text articles were assessed for eligibility. Seventeen in-vitro studies were finalized for the extraction of quantitative data. All 17 articles had a low risk of bias and were retained. The influencing items for evaluating the research were different in most studies; therefore, qualitative synthesis of the results was feasible. They generally included preparation design, material thickness, depth of preparation in the tooth, internal divergence angle, and finish line. Meta-analysis was not done due to heterogeneity of preparation types and evaluation methods. Results revealed that fracture resistance of occlusal veneers is higher than normal mastication force, and it is sufficient to prepare the occlusal surface, use a self-etching primer for bonding, and an acceptable minimum ceramic thickness. The marginal discrepancy of occlusal veneers is clinically acceptable. However, this systematic review faces some limitations due to the lack of in vivo studies, different preparation designs in included studies, different follow-ups, and lack of comprehensive explanations in articles.
CONCLUSIONS
The preparation design of occlusal veneers influences both marginal adaptation and fracture resistance. Various preparation designs are proven to have clinically acceptable fracture strength and marginal adaptation.
Topics: Dental Porcelain; Dental Veneers; Flexural Strength; Dental Stress Analysis; Materials Testing; Ceramics
PubMed: 36062841
DOI: 10.1002/cre2.653 -
International Journal of Implant... Nov 2021Implant-assisted removable partial dentures (IARPDs) have recently become popular, but little information is available on the treatment outcomes based on the Kennedy... (Review)
Review
BACKGROUND
Implant-assisted removable partial dentures (IARPDs) have recently become popular, but little information is available on the treatment outcomes based on the Kennedy classification and attachment types.
OBJECTIVE
The objective of this review was to evaluate the treatment outcomes of IARPD delivered for distal extension edentulous areas based on the differences in the Kennedy classification and attachment type.
MATERIALS AND METHODS
English-language clinical studies on IARPD published between January 1980 and February 2020 were collected from MEDLINE (via PubMed), the Cochrane Library (via the Cochrane Central Register of Controlled Trials), Scopus online database, and manual searching. Two reviewers selected the articles based on pre-determined inclusion and exclusion criteria, followed by data extraction and analysis.
RESULTS
Eighty-one studies were selected after evaluating the titles and abstracts of 2410 papers. Nineteen studies were finally included after the perusal of the full text. Fourteen studies focused on Class I, 4 studies investigated both Class I and II, and only 1 study was conducted on Kennedy's class II. Eight types of attachments were reported. The ball attachment was the most frequently used attachment, which was employed in 8 of the included studies. The implant survival rate ranged from 91 to 100%. The reported marginal bone loss ranged from 0.3 mm to 2.30 mm. The patient satisfaction was higher with IARPD than with conventional RPDs or that before treatment. The results of prosthetic complications were heterogeneous and inconclusive.
CONCLUSION
IARPD exhibited favorable clinical outcomes when used as a replacement for distal extension edentulous areas. The comparison between the clinical outcomes of Kennedy's class I and II was inconclusive owing to the lack of studies focusing on Kennedy Class II alone. The stud attachment was the most commonly used type in IARPDs. Overall, the different attachment systems did not influence the implant survival rate and patient satisfaction. Further high-quality studies are needed to investigate the attachment systems used in IARPD.
Topics: Dental Implants; Dental Prosthesis, Implant-Supported; Denture, Partial, Removable; Humans; Patient Satisfaction; Treatment Outcome
PubMed: 34773513
DOI: 10.1186/s40729-021-00394-z