-
Acta Ortopedica Mexicana 2020This is a systematic literature review for COVID-19, SARS-CoV-2 with Orthopedic and Spine Surgery relevance.
STUDY DESIGN
This is a systematic literature review for COVID-19, SARS-CoV-2 with Orthopedic and Spine Surgery relevance.
OBJECTIVES
It is to determine in Orthopedic surgery and Spine Surgery and its branches the new required safety protocols when attending patients with risk of infection, or transmission for COVID-19 and comorbidities in the outpatient and inpatient hospital setting.
METHODS
A systematic literature review.
RESULTS
Recent knowledge for this disease has changed the Virus affects ORF-8 protein of the Hemoglobin destroying B-Hemoglobin, and IDC (intravascular disseminated coagulation) is found to happen in many patients, together with its capsular capability to adhere to metallic and plastic surfaces, pneumonic pattern associated with ventilator use, and the relapse in some patients, changes the view, preventative measures and treatment of this disease. Publication of global statistics show that patients with hypertension tend to have a higher rate of suffering the disease. Some new measures are proposed.
CONCLUSIONS
New care guidelines for COVID-19 patients are proposed based on the new research on SARS-CoV-2 clinical pathologic findings are necessary.
Topics: COVID-19; Humans; Orthopedic Procedures; Orthopedics; SARS-CoV-2
PubMed: 33417752
DOI: No ID Found -
Clinical Oral Investigations Nov 2021This systematic review and meta-analysis aimed to assess the diagnostic accuracy and reliability of commonly used caries detection methods for proximal caries... (Meta-Analysis)
Meta-Analysis Review
AIM
This systematic review and meta-analysis aimed to assess the diagnostic accuracy and reliability of commonly used caries detection methods for proximal caries diagnostics. Visual examination (VE), bitewing radiography (BWR), laser fluorescence (LF), and fibre-optic transillumination (FOTI) were considered in detail.
MATERIAL AND METHODS
PRISMA guidelines for the reporting of systematic reviews and meta-analyses were applied. The mnemonic PIRDS (problem, index test, reference test, diagnostic and study type) concept was used to guide the literature search. Next, studies that met the inclusion criteria were stepwise selected and evaluated for their quality with a risk of bias (RoB) assessment tool. Studies with low/moderate bias and sufficient reporting were considered for meta-analysis. The pooled sensitivity (SE), specificity (SP), diagnostic odds ratio (DOR), and area under the ROC curve (AUC) were calculated.
RESULTS
From 129 studies meeting the selection criteria, 31 in vitro studies and five clinical studies were finally included in the meta-analysis. The AUC values for in vitro VE amounted to 0.84 (caries detection) and 0.85 (dentin caries detection). BWR ranged in vitro from 0.55 to 0.82 (caries detection) and 0.81-0.92 (dentin caries detection). LF showed higher AUC values for overall caries detection (0.91) and dentin caries detection (0.83) than did other methods. Clinical data are limited.
CONCLUSION
The number of diagnostic studies with low/moderate RoB was found to be low and indicates a need for high-quality, well-designed caries diagnostic studies.
CLINICAL RELEVANCE
BWR and LF showed good diagnostic performance on proximal surfaces. However, because of the low number of includable clinical studies, these data should be interpreted with caution.
Topics: Dental Caries Susceptibility; Diagnostic Tests, Routine; Reproducibility of Results; Sensitivity and Specificity; Transillumination
PubMed: 34480645
DOI: 10.1007/s00784-021-04113-1 -
Acta Biomaterialia Oct 2023Titanium (Ti) and Ti alloys are commonly used in dental implants, which have good biocompatibility, mechanical strength, processability, and corrosion resistance.... (Review)
Review
Titanium (Ti) and Ti alloys are commonly used in dental implants, which have good biocompatibility, mechanical strength, processability, and corrosion resistance. However, the surface inertia of Ti implants leads to delayed integration of Ti and new bone, as well as problems such as aseptic loosening and inadequate osseointegration. Magnesium (Mg) ions can promote bone regeneration, and many studies have used Mg-containing materials to modify the Ti implant surface. This systematic review summarizes the methods, effects, and clinical applications of surface modification of Ti implants with Mg-containing coatings. Database collection was completed on Janury 1, 2023, and a total of 29 relevant studies were ultimately included. Mg can be compounded with different materials and coated to the surface of Ti implants using different methods. In vitro and in vivo experiments have shown that Mg-containing coatings promote cell adhesion and osteogenic differentiation. On the one hand, the surface roughness of implants increases with the addition of Mg-containing coatings, which is thought to have an impact on the osseointegration of the implant. On the other hand, Mg ions promote cell attachment through binding interactions between the integrin family and FAK-related signaling pathways. And Mg ions could induce osseointegration by activating PI3K, Notch, ERK/c-Fos, BMP-4-related signaling pathways and TRPM7 protein channels. Overall, Mg-based coatings show great potential for the surface modification of Ti implants to promote osseointegration. STATEMENT OF SIGNIFICANCE: The inertia surface of titanium (Ti) implants leads to delayed osseointegration. Magnesium (Mg) ions, known for promoting bone regeneration, have been extensively studied to modify the surface of Ti implants. However, no consensus has been reached on the appropriate processing methods, surface roughness and effective concentration of Mg-containing coatings for osseointegration. This systematic review focus on the surface modification of Ti implants with Mg-containing compounds, highlighting the effects of Mg-containing coatings on the surface properties of Ti implants and its associated mechanisms. Besides, we also provide an outlook on future directions to promote the clinical application of Mg-modified implants.
Topics: Coated Materials, Biocompatible; Ions; Magnesium; Osseointegration; Osteogenesis; Surface Properties; Titanium
PubMed: 37517617
DOI: 10.1016/j.actbio.2023.07.048 -
The Science of the Total Environment Dec 2021Little is known about contaminated surfaces as a route of transmission for SARS-CoV- 2 and a systematic review is missing and urgently needed to provide guidelines for... (Review)
Review
Little is known about contaminated surfaces as a route of transmission for SARS-CoV- 2 and a systematic review is missing and urgently needed to provide guidelines for future research studies. As such, the aim of the present study was to review the current scientific knowledge and to summarize the existing studies in which SARS-CoV-2 has been detected in inanimate surfaces. This systematic review includes studies since the emergence of SARS-CoV-2, available in PubMed/MEDLINE and Scopus. Duplicate publications were removed, and exclusion criteria was applied to eliminate unrelated studies, resulting in 37 eligible publications. The present study provides the first overview of SARS-CoV-2 detection in surfaces. The highest detection rates occurred in hospitals and healthcare facilities with COVID-19 patients. Contamination with SARS-CoV-2 on surfaces was detected in a wide range of facilities and surfaces. There is a lack of studies performing viability testing for SARS-CoV-2 recovered from surfaces, and consequently it is not yet possible to assess the potential for transmission via surfaces.
Topics: COVID-19; Drug Contamination; Hospitals; Humans; RNA, Viral; SARS-CoV-2
PubMed: 34325141
DOI: 10.1016/j.scitotenv.2021.149231 -
Hand Surgery & Rehabilitation Apr 2023Intercarpal arthrodesis is a well-established option to treat various disorders of the carpus, such as localized osteoarthritis, carpal instability, and Kienböck's... (Review)
Review
Intercarpal arthrodesis is a well-established option to treat various disorders of the carpus, such as localized osteoarthritis, carpal instability, and Kienböck's disease. This is a non-conservative procedure aimed at obtaining a stable and congruent interface between the radius and the proximal carpal row, which restores wrist function by minimizing pain and restoring grip strength. These procedures generally yield good predictable results that are maintained over time. However, all intracarpal arthrodesis procedures cause a loss of wrist range of motion. To optimize outcomes and minimize complications, especially nonunion, this surgery may require a learning curve. A precise surgical technique for preparing the bone surfaces, bringing enough bone graft, and using reliable fixation is essential. Since the late 1960s, several intracarpal arthrodesis procedures have been described. Commonly used fusions target the scaphotrapeziotrapezoid, scaphocapitate, four corners, capitolunate or capitohamatolunate regions. Lesser used fusions focus on specific lesions such as the scapholunate, scapholunocapitate, lunotriquetral and triquetrohamate. Here, we propose a systematic review of the various types of intercarpal arthrodesis procedures described in the literature. After having described each arthrodesis, we specify their indications, the variations of the surgical techniques, and then present an overview of the results and complications. Finally, we discuss how these surgeries affect wrist biomechanics. LEVEL OF EVIDENCE: III.
Topics: Humans; Carpal Bones; Wrist Joint; Wrist; Osteoarthritis; Arthrodesis
PubMed: 36642245
DOI: 10.1016/j.hansur.2022.12.006 -
Wound Repair and Regeneration :... Jul 2022Skin and wound blotting are non-invasive techniques used to sample the skin and wound surface chemistry, whereby a nitrocellulose membrane is applied to an intact or... (Review)
Review
Skin and wound blotting are non-invasive techniques used to sample the skin and wound surface chemistry, whereby a nitrocellulose membrane is applied to an intact or broken cutaneous surface to detect biomarkers. However, there has been no comprehensive review of the evidence for the techniques used and data obtained to date. The primary aim of this study was to review the utilities of surface blotting for the diagnosis and prognosis of physiological, pre-disease, and pathological states. The secondary aim was to summarise the procedural steps. A systematic literature search was conducted on 9 July 2021 using Medline, Embase, and Google Scholar databases. Investigators used McMaster's Critical Review Form for Quantitative Studies to assess quality, then performed a narrative synthesis reporting according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Twenty-five studies were reviewed. Eighteen studies were of good quality, and seven were of moderate quality. These studies conducted skin and wound blotting on 176 animals and 1546 humans. Studies reported physiological and pathological states for diagnosis and prediction of conditions, including skin tears, wound healing, biofilm detection, and skin barrier function. The four steps for blotting are surface preparation, blot preparation, application and removal of blot, and analysis. This review demonstrates that blotting can determine the skin and wound surface chemistry using a versatile and reproducible technique. However, future research is needed to validate the technique and skin biomarkers identified.
Topics: Animals; Prognosis; Skin; Soft Tissue Injuries; Wound Healing
PubMed: 35638724
DOI: 10.1111/wrr.13030 -
The Ocular Surface Jul 2023Environmental risk factors that have an impact on the ocular surface were reviewed and associations with age and sex, race/ethnicity, geographical area, seasonality,...
Environmental risk factors that have an impact on the ocular surface were reviewed and associations with age and sex, race/ethnicity, geographical area, seasonality, prevalence and possible interactions between risk factors are reviewed. Environmental factors can be (a) climate-related: temperature, humidity, wind speed, altitude, dew point, ultraviolet light, and allergen or (b) outdoor and indoor pollution: gases, particulate matter, and other sources of airborne pollutants. Temperature affects ocular surface homeostasis directly and indirectly, precipitating ocular surface diseases and/or symptoms, including trachoma. Humidity is negatively associated with dry eye disease. There is little data on wind speed and dewpoint. High altitude and ultraviolet light exposure are associated with pterygium, ocular surface degenerations and neoplastic disease. Pollution is associated with dry eye disease and conjunctivitis. Primary Sjögren syndrome is associated with exposure to chemical solvents. Living within a potential zone of active volcanic eruption is associated with eye irritation. Indoor pollution, "sick" building or house can also be associated with eye irritation. Most ocular surface conditions are multifactorial, and several environmental factors may contribute to specific diseases. A systematic review was conducted to answer the following research question: "What are the associations between outdoor environment pollution and signs or symptoms of dry eye disease in humans?" Dry eye disease is associated with air pollution (from NO) and soil pollution (from chromium), but not from air pollution from CO or PM. Future research should adequately account for confounders, follow up over time, and report results separately for ocular surface findings, including signs and symptoms.
Topics: Humans; Air Pollution; Particulate Matter; Dry Eye Syndromes; Conjunctiva; Life Style
PubMed: 37062427
DOI: 10.1016/j.jtos.2023.04.007 -
Clinical Oral Investigations Aug 2021This systematic review and meta-analysis aimed to assess the diagnostic performance of commonly used methods for occlusal caries diagnostics, such as visual examination... (Meta-Analysis)
Meta-Analysis Review
AIM
This systematic review and meta-analysis aimed to assess the diagnostic performance of commonly used methods for occlusal caries diagnostics, such as visual examination (VE), bitewing radiography (BW) and laser fluorescence (LF), in relation to their ability to detect (dentin) caries under clinical and laboratory conditions.
MATERIALS AND METHODS
A systematic search of the literature was performed to identify studies meeting the inclusion criteria using the PIRDS concept (N = 1090). A risk of bias (RoB) assessment tool was used for quality evaluation. Reports with low/moderate RoB, well-matching thresholds for index and reference tests and appropriate reporting were included in the meta-analysis (N = 37; 29 in vivo/8 in vitro). The pooled sensitivity (SE), specificity (SP), diagnostic odds ratio (DOR) and areas under ROC curves (AUCs) were computed.
RESULTS
SP ranged from 0.50 (fibre-optic transillumination/caries detection level) to 0.97 (conventional BW/dentine detection level) in vitro. AUCs were typically higher for BW or LF than for VE. The highest AUC of 0.89 was observed for VE at the 1/3 dentin caries detection level; SE (0.70) was registered to be higher than SP (0.47) for VE at the caries detection level in vivo.
CONCLUSION
The number of included studies was found to be low. This underlines the need for high-quality caries diagnostic studies that further provide data in relation to multiple caries thresholds.
CLINICAL RELEVANCE
VE, BW and LF provide acceptable measures for their diagnostic performance on occlusal surfaces, but the results should be interpreted with caution due to the limited data in many categories.
Topics: Dental Caries; Dental Caries Susceptibility; Fluorescence; Humans; Radiography, Bitewing; Reproducibility of Results; Sensitivity and Specificity; Transillumination
PubMed: 34128130
DOI: 10.1007/s00784-021-04024-1 -
The Cochrane Database of Systematic... May 2021Pressure ulcers (also known as pressure injuries) are localised injuries to the skin or underlying soft tissue, or both, caused by unrelieved pressure, shear or... (Meta-Analysis)
Meta-Analysis
BACKGROUND
Pressure ulcers (also known as pressure injuries) are localised injuries to the skin or underlying soft tissue, or both, caused by unrelieved pressure, shear or friction. Foam surfaces (beds, mattresses or overlays) are widely used with the aim of preventing pressure ulcers.
OBJECTIVES
To assess the effects of foam beds, mattresses or overlays compared with any support surface on the incidence of pressure ulcers in any population in any setting.
SEARCH METHODS
In November 2019, we searched the Cochrane Wounds Specialised Register; the Cochrane Central Register of Controlled Trials (CENTRAL); Ovid MEDLINE (including In-Process & Other Non-Indexed Citations); Ovid Embase and EBSCO CINAHL Plus. We also searched clinical trials registries for ongoing and unpublished studies, and scanned reference lists of relevant included studies as well as reviews, meta-analyses and health technology reports to identify additional studies. There were no restrictions with respect to language, date of publication or study setting.
SELECTION CRITERIA
We included randomised controlled trials that allocated participants of any age to foam beds, mattresses or overlays. Comparators were any beds, mattresses or overlays.
DATA COLLECTION AND ANALYSIS
At least two review authors independently assessed studies using predetermined inclusion criteria. We carried out data extraction, 'Risk of bias' assessment using the Cochrane 'Risk of bias' tool, and the certainty of the evidence assessment according to Grading of Recommendations, Assessment, Development and Evaluations methodology. If a foam surface was compared with surfaces that were not clearly specified, then the included study was recorded and described but not considered further in any data analyses.
MAIN RESULTS
We included 29 studies (9566 participants) in the review. Most studies were small (median study sample size: 101 participants). The average age of participants ranged from 47.0 to 85.3 years (median: 76.0 years). Participants were mainly from acute care settings. We analysed data for seven comparisons in the review: foam surfaces compared with: (1) alternating pressure air surfaces, (2) reactive air surfaces, (3) reactive fibre surfaces, (4) reactive gel surfaces, (5) reactive foam and gel surfaces, (6) reactive water surfaces, and (7) another type of foam surface. Of the 29 included studies, 17 (58.6%) presented findings which were considered at high overall risk of bias.
PRIMARY OUTCOME
pressure ulcer incidence Low-certainty evidence suggests that foam surfaces may increase the risk of developing new pressure ulcers compared with (1) alternating pressure (active) air surfaces (risk ratio (RR) 1.59, 95% confidence interval (CI) 0.86 to 2.95; I = 63%; 4 studies, 2247 participants), and (2) reactive air surfaces (RR 2.40, 95% CI 1.04 to 5.54; I = 25%; 4 studies, 229 participants). We are uncertain regarding the difference in pressure ulcer incidence in people treated with foam surfaces and the following surfaces: (1) reactive fibre surfaces (1 study, 68 participants); (2) reactive gel surfaces (1 study, 135 participants); (3) reactive gel and foam surfaces (1 study, 91 participants); and (4) another type of foam surface (6 studies, 733 participants). These had very low-certainty evidence. Included studies have data on time to pressure ulcer development for two comparisons. When time to ulcer development is considered using hazard ratios, the difference in the risk of having new pressure ulcers, over 90 days' follow-up, between foam surfaces and alternating pressure air surfaces is uncertain (2 studies, 2105 participants; very low-certainty evidence). Two further studies comparing different types of foam surfaces also reported time-to-event data, suggesting that viscoelastic foam surfaces with a density of 40 to 60 kg/m may decrease the risk of having new pressure ulcers over 11.5 days' follow-up compared with foam surfaces with a density of 33 kg/m (1 study, 62 participants); and solid foam surfaces may decrease the risk of having new pressure ulcers over one month's follow-up compared with convoluted foam surfaces (1 study, 84 participants). Both had low-certainty evidence. There was no analysable data for the comparison of foam surfaces with reactive water surfaces (one study with 117 participants). Secondary outcomes Support-surface-associated patient comfort: the review contains data for three comparisons for this outcome. It is uncertain if there is a difference in patient comfort measure between foam surfaces and alternating pressure air surfaces (1 study, 76 participants; very low-certainty evidence); foam surfaces and reactive air surfaces (1 study, 72 participants; very low-certainty evidence); and different types of foam surfaces (4 studies, 669 participants; very low-certainty evidence). All reported adverse events: the review contains data for two comparisons for this outcome. We are uncertain about differences in adverse effects between foam surfaces and alternating pressure (active) air surfaces (3 studies, 2181 participants; very low-certainty evidence), and between foam surfaces and reactive air surfaces (1 study, 72 participants; very low-certainty evidence). Health-related quality of life: only one study reported data on this outcome. It is uncertain if there is a difference (low-certainty evidence) between foam surfaces and alternating pressure (active) air surfaces in health-related quality of life measured with two different questionnaires, the EQ-5D-5L (267 participants) and the PU-QoL-UI (233 participants). Cost-effectiveness: one study reported trial-based cost-effectiveness evaluations. Alternating pressure (active) air surfaces are probably more cost-effective than foam surfaces in preventing pressure ulcer incidence (2029 participants; moderate-certainty evidence).
AUTHORS' CONCLUSIONS
Current evidence suggests uncertainty about the differences in pressure ulcer incidence, patient comfort, adverse events and health-related quality of life between using foam surfaces and other surfaces (reactive fibre surfaces, reactive gel surfaces, reactive foam and gel surfaces, or reactive water surfaces). Foam surfaces may increase pressure ulcer incidence compared with alternating pressure (active) air surfaces and reactive air surfaces. Alternating pressure (active) air surfaces are probably more cost-effective than foam surfaces in preventing new pressure ulcers. Future research in this area should consider evaluation of the most important support surfaces from the perspective of decision-makers. Time-to-event outcomes, careful assessment of adverse events and trial-level cost-effectiveness evaluation should be considered in future studies. Trials should be designed to minimise the risk of detection bias; for example, by using digital photography and by blinding adjudicators of the photographs to group allocation. Further review using network meta-analysis will add to the findings reported here.
Topics: Aged; Aged, 80 and over; Air; Bedding and Linens; Beds; Bias; Female; Gels; Humans; Incidence; Male; Middle Aged; Pressure Ulcer; Randomized Controlled Trials as Topic; Viscoelastic Substances
PubMed: 34097765
DOI: 10.1002/14651858.CD013621.pub2 -
Journal of Esthetic and Restorative... Sep 2023Direct resin composite bonding offers a highly esthetic, minimally invasive option for the treatment of anterior teeth however the challenge to improve their longevity... (Review)
Review
STATEMENT OF PROBLEM
Direct resin composite bonding offers a highly esthetic, minimally invasive option for the treatment of anterior teeth however the challenge to improve their longevity remains. Direct resin composite restorations are limited by the risk of staining which may be influenced by the final surface roughness (Ra) of composite achieved.
PURPOSE
The purpose of this review is to investigate, using a systematic approach, whether the final surface roughness of anterior composite restorations is affected by the interaction between resin composite and polishing systems.
MATERIALS AND METHODS
The review was conducted by 3 independent reviewers and included articles published up to January 21, 2021. Three electronic databases were searched: Medline, Embase, and Web of Science. Studies assessing a quantitative effect of polishing methods on the Ra of direct composite resin materials published after the year 2000 and restricted to the English language were included.
RESULTS
The database search for the effect of polishing systems on composite materials retrieved 125 eligible studies. Twelve duplicate records were removed. The resulting records were screened using title and abstract leading to 38 reports which were sought for retrieval. Application of eligibility criteria led to 11 studies included in the review. Hand searching of these studies yielded no additional papers.
CONCLUSIONS
There is insufficient evidence to determine whether combination of composite and polisher influences final Ra. More research is required to determine if there is an optimum combination of polisher and composite.
CLINICAL IMPLICATIONS
Polishing should be completed following planned finishing procedures. The approximation to the final surface and which finishing burs to use, if any, should be considered when planning a restoration. Durafill VS predictably achieves an acceptable Ra by different polishers.
Topics: Dental Restoration, Permanent; Dental Polishing; Surface Properties; Diamond; Materials Testing; Dental Materials; Composite Resins
PubMed: 37458370
DOI: 10.1111/jerd.13102