-
Physiological Reports Mar 2021Exercise is able to increase both muscle protein synthesis and mitochondrial biogenesis. However, acidosis, which can occur in pathological states as well as during...
AIM
Exercise is able to increase both muscle protein synthesis and mitochondrial biogenesis. However, acidosis, which can occur in pathological states as well as during high-intensity exercise, can decrease mitochondrial function, whilst its impact on muscle protein synthesis is disputed. Thus, the aim of this study was to determine the effect of a mild physiological decrease in pH, by administration of ammonium chloride, on myofibrillar and mitochondrial protein synthesis, as well as associated molecular signaling events.
METHODS
Male Wistar rats were given either a placebo or ammonium chloride prior to a short interval training session. Rats were killed before exercise, immediately after exercise, or 3 h after exercise.
RESULTS
Myofibrillar (p = 0.036) fractional protein synthesis rates was increased immediately after exercise in the soleus muscle of the placebo group, but this effect was absent in the ammonium chloride group. However, in the gastrocnemius muscle NH Cl increased myofibrillar (p = 0.044) and mitochondrial protein synthesis (0 h after exercise p = 0.01; 3 h after exercise p = 0.003). This was accompanied by some small differences in protein phosphorylation and mRNA expression.
CONCLUSION
This study found ammonium chloride administration immediately prior to a single session of exercise in rats had differing effects on mitochondrial and myofibrillar protein synthesis rates in soleus (type I) and gastrocnemius (type II) muscle in rats.
Topics: Acidosis; Ammonium Chloride; Animals; Male; Mitochondria; Mitochondrial Proteins; Muscle Proteins; Muscle, Skeletal; Myofibrils; Physical Conditioning, Animal; Rats, Wistar; Rats
PubMed: 33769716
DOI: 10.14814/phy2.14797 -
The Journal of Physical Chemistry. B Jan 2022Deep eutectic solvents (DESs) formed by hydrogen bond donors and acceptors are a promising new class of solvents. Both hydrophilic and hydrophobic binary DESs readily...
Deep eutectic solvents (DESs) formed by hydrogen bond donors and acceptors are a promising new class of solvents. Both hydrophilic and hydrophobic binary DESs readily absorb water, making them ternary mixtures, and a small water content is always inevitable under ambient conditions. We present a thorough study of a typical hydrophobic DES formed by a 1:2 mole ratio of tetrabutyl ammonium chloride and decanoic acid, focusing on the effects of a low water content caused by absorbed water vapor, using multinuclear NMR techniques, molecular modeling, and several other physicochemical techniques. Already very low water contents cause dynamic nanoscale phase segregation, reduce solvent viscosity and fragility, increase self-diffusion coefficients and conductivity, and enhance local dynamics. Water interferes with the hydrogen-bonding network between the chloride ions and carboxylic acid groups by solvating them, which enhances carboxylic acid self-correlation and ion pair formation between tetrabutyl ammonium and chloride. Simulations show that the component molar ratio can be varied, with an effect on the internal structure. The water-induced changes in the physical properties are beneficial for most prospective applications but water creates an acidic aqueous nanophase with a high halide ion concentration, which may have chemically adverse effects.
PubMed: 35001628
DOI: 10.1021/acs.jpcb.1c08170 -
Foods (Basel, Switzerland) Jan 2023Different environmental parameters, such as temperature and humidity, aggravate food spoilage, and different volatile organic compounds (VOCs) are released based on the...
Different environmental parameters, such as temperature and humidity, aggravate food spoilage, and different volatile organic compounds (VOCs) are released based on the extent of spoilage. In addition, a lack of efficient monitoring of the dosage of pesticides leads to crop failure. This could lead to the loss of food resources and food production with harmful contaminants and a short lifetime. For this reason, precise monitoring of different environmental parameters and contaminations during food processing and storage is a key factor for maintaining its safety and nutritional value. Thus, developing reliable, efficient, cost-effective sensor devices for these purposes is of utmost importance. This paper shows that Poly-(diallyl-dimethyl ammonium chloride)/reduced Graphene oxide (PDAC/rGO) films produced by a simple Layer-by-Layer deposition can be effectively used to monitor temperature, relative humidity, and the presence of volatile organic compounds as indicators for spoilage odors. At the same time, they show potential for electrochemical detection of organophosphate pesticide dimethoate. By monitoring the resistance/impedance changes during temperature and relative humidity variations or upon the exposure of PDAC/rGO films to methanol, good linear responses were obtained in the temperature range of 10-100 °C, 15-95% relative humidity, and 35 ppm-55 ppm of methanol. Moreover, linearity in the electrochemical detection of dimethoate is shown for the concentrations in the order of 10 µmol dm. The analytical response to different external stimuli and analytes depends on the number of layers deposited, affecting sensors' sensitivity, response and recovery time, and long-term stability. The presented results could serve as a starting point for developing advanced multi-modal sensors and sensor arrays with high potential for analytical applications in food safety and quality monitoring.
PubMed: 36673364
DOI: 10.3390/foods12020268 -
Journal of Sustainable Metallurgy 2023A hydrometallurgical process is described for conversion of an aqueous solution of lithium chloride into an aqueous solution of lithium hydroxide via a...
UNLABELLED
A hydrometallurgical process is described for conversion of an aqueous solution of lithium chloride into an aqueous solution of lithium hydroxide via a chloride/hydroxide anion exchange reaction by solvent extraction. The organic phase comprises a quaternary ammonium chloride and a hydrophobic phenol in a diluent. The best results were observed for a mixture of the quaternary ammonium chloride Aliquat 336 and 2,6-di--butylphenol (1:1 molar ratio) in the aliphatic diluent Shellsol D70. The solvent extraction process involves two steps. In the first step, the organic phase is contacted with an aqueous sodium hydroxide solution. The phenol is deprotonated, and a chloride ion is simultaneously transferred to the aqueous phase, leading to in situ formation of a quaternary ammonium phenolate in the organic phase. The organic phase, comprising the quaternary ammonium phenolate, is contacted in the second step with an aqueous lithium chloride solution. This contact converts the phenolate into the corresponding phenol by protonation with water extracted to the organic phase, followed by a transfer of hydroxide ions to the aqueous phase and chloride ions to the organic phase. As a result, the aqueous lithium chloride solution is transformed into a lithium hydroxide solution. The process has been demonstrated in continuous counter-current mode in mixer-settlers. Solid battery-grade lithium hydroxide monohydrate was obtained from the aqueous solution by crystallization or by antisolvent precipitation with isopropanol. The process consumes no chemicals other than sodium hydroxide. No waste is generated, with the exception of an aqueous sodium chloride solution.
SUPPLEMENTARY INFORMATION
The online version contains supplementary material available at 10.1007/s40831-022-00629-2.
PubMed: 36937828
DOI: 10.1007/s40831-022-00629-2 -
Acta Crystallographica Section B,... Jun 2023According to the crystal structure determination by Edstrand & Blomqvist [Ark. Kemi (1955), 8, 245-256], intercalate NHCl·AsO·0.5HO ({\bf Y_{{NH}_{4}Cl}}) is not...
According to the crystal structure determination by Edstrand & Blomqvist [Ark. Kemi (1955), 8, 245-256], intercalate NHCl·AsO·0.5HO ({\bf Y_{{NH}_{4}Cl}}) is not isostructural with compound KCl·AsO·0.5HO. This is very unlikely because both NHBr·2AsO and KBr·2AsO as well as NHI·2AsO and KI·2AsO are isostructural. Hence, intercalate {\bf Y_{{NH}_{4}Cl}} has been studied using single-crystal X-ray diffraction in addition to attenuated total reflection Fourier transform infrared (ATR-FTIR) and N solid-state magic-angle spinning nuclear magnetic resonance (ssNMR) spectroscopies. These techniques indicate that revising the previous crystal structure model is necessary. Compound {\bf Y_{{NH}_{4}Cl}} crystallizes in space group P6/mmm with unit-cell parameters a = 5.25420 (10) Å and c = 12.6308 (3) Å and is isostructural with KCl·AsO·0.5HO. The presence of two symmetry-independent ammonium cations in the structure has been unequivocally confirmed using N ssNMR spectroscopy. The N ssNMR spectrum of intercalate {\bf Y_{{NH}_{4}Cl}} has been compared with analogous spectra of NHBr·2AsO and NHI·2AsO which allowed for a probable assignment of signals to ammonium cations occupying particular sites in the crystal structures. Thermogravimetry, differential scanning calorimetry and variable-temperature ATR-FTIR spectra have revealed that intercalate {\bf Y_{{NH}_{4}Cl}} is dehydrated between 320 and 475 K. Upon cooling or standing in moist air water is re-absorbed. Dehydration leads to significant shortening of the c unit-cell parameter as revealed by powder X-ray diffraction [c = 12.1552 (7) Å at 293 K]. Compound {\bf Y_{{NH}_{4}Cl}} decomposes on prolonged heating above 490 K to arsenic(III) oxide and ammonium chloride.
PubMed: 37070865
DOI: 10.1107/S2052520623003086 -
Chemical & Pharmaceutical Bulletin 2021Preservatives in eye drops have always been the focus of people's attention. Benzalkonium chloride (BAC) is one of the most frequently used bacteriostatic agents in eye...
Preservatives in eye drops have always been the focus of people's attention. Benzalkonium chloride (BAC) is one of the most frequently used bacteriostatic agents in eye drops, which has broad-spectrum and efficient bactericidal ability. However, the inappropriate dosage of BAC may lead to high cytotoxicity. Therefore, adding low-toxic hydroxypropyltrimethyl ammonium chloride chitosan (HACC) can not only achieve antimicrobial effect, but also have the advantages of moisturizing and biocompatibility. In this paper, the minimum inhibitory concentrations (MICs) of HACC and BAC were evaluated against Escherichia coli, Staphylococcus aureus, Staphylococcus epidermidis, Diphtheroid bacillus and Candida albicans. Based on the MIC of each antimicrobial agent, an antimicrobial assay was performed to investigate the antimicrobial ability of disinfectant solution. Besides, cytotoxicity had also been assessed. When the HACC/BAC solution at weight ratio of 150/1 showed a highest antimicrobial efficiency and the cell proliferation rates were the highest in 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays. Furthermore, the cell leakage was examined by UV absorption, indicating the great synergistic antimicrobial effect between HACC and BAC. What is more, the results of micromorphology research suggested that as the result of repulsive force between the two molecules, the average particle size of HACC would decrease. Finally, the impedance experiment showed that with the addition of BAC, current density would increase significantly, suggesting that more positive charge group was exposed to aqueous solution, leading the the increase of antimicrobial ability. Based on these results, HACC-BAC combination solution might be a promising novel antimicrobial group for biomedical applications.
Topics: Animals; Anti-Infective Agents; Benzalkonium Compounds; Candida albicans; Cell Line; Cell Proliferation; Chitosan; Drug Synergism; Escherichia coli; Mice; Microbial Sensitivity Tests; Quaternary Ammonium Compounds; Staphylococcus aureus
PubMed: 34193710
DOI: 10.1248/cpb.c20-00995 -
Methods in Molecular Biology (Clifton,... 2020Biomimetic nanoparticles are hybrid nanostructures in which the uppermost layer is similar to a cell membrane. In these nanoparticles, lipids and biopolymers can be...
Biomimetic nanoparticles are hybrid nanostructures in which the uppermost layer is similar to a cell membrane. In these nanoparticles, lipids and biopolymers can be organized to improve drug incorporation and delivery. This report provides instructions for the preparation and physical characterization of four different biomimetic nanoparticles: (1) polystyrene sulphate (PSS) nanoparticles covered with one cationic dioctadecyl dimethylammonium bromide bilayer (DODAB), which incorporates dimeric channels of the antimicrobial peptide Gramicidin D; (2) silica nanoparticles covered with one single bilayer of the antimicrobial cationic lipid DODAB; (3) hybrid lipid/polymer indomethacin (IND) nanoparticles from injection of IND/DODAB ethanolic solution in a water solution of carboxymethyl cellulose (CMC); (4) bactericidal and fungicidal nanoparticles from DODAB bilayer fragments (BF) covered consecutively by a CMC and a poly(diallyl dimethyl ammonium chloride) (PDDA) layer. These examples provide the basis for the preparation and characterization of novel biomimetic nanoparticles with lipids and/or biopolymers in their composition. The polymers and lipids in the hybrid nanoparticle composition may impart stability and/or bioactivity and/or provide adequate microenvironments for carrying bioactive drugs and biomolecules.
Topics: Adsorption; Anti-Bacterial Agents; Biological Mimicry; Drug Delivery Systems; Lipid Bilayers; Lipids; Nanoparticles; Polymers
PubMed: 32152970
DOI: 10.1007/978-1-0716-0319-2_4 -
Journal of Virology Jan 2022Rhinoviruses (RVs) cause recurrent infections of the nasal and pulmonary tracts, life-threatening conditions in chronic respiratory illness patients, predisposition of...
Rhinoviruses (RVs) cause recurrent infections of the nasal and pulmonary tracts, life-threatening conditions in chronic respiratory illness patients, predisposition of children to asthmatic exacerbation, and large economic cost. RVs are difficult to treat. They rapidly evolve resistance and are genetically diverse. Here, we provide insight into RV drug resistance mechanisms against chemical compounds neutralizing low pH in endolysosomes. Serial passaging of RV-A16 in the presence of the vacuolar proton ATPase inhibitor bafilomycin A1 (BafA1) or the endolysosomotropic agent ammonium chloride (NHCl) promoted the emergence of resistant virus populations. We found two reproducible point mutations in viral proteins 1 and 3 (VP1 and VP3), A2526G (serine 66 to asparagine [S66N]), and G2274U (cysteine 220 to phenylalanine [C220F]), respectively. Both mutations conferred cross-resistance to BafA1, NHCl, and the protonophore niclosamide, as identified by massive parallel sequencing and reverse genetics, but not the double mutation, which we could not rescue. Both VP1-S66 and VP3-C220 locate at the interprotomeric face, and their mutations increase the sensitivity of virions to low pH, elevated temperature, and soluble intercellular adhesion molecule 1 receptor. These results indicate that the ability of RV to uncoat at low endosomal pH confers virion resistance to extracellular stress. The data endorse endosomal acidification inhibitors as a viable strategy against RVs, especially if inhibitors are directly applied to the airways. Rhinoviruses (RVs) are the predominant agents causing the common cold. Anti-RV drugs and vaccines are not available, largely due to rapid evolutionary adaptation of RVs giving rise to resistant mutants and an immense diversity of antigens in more than 160 different RV types. In this study, we obtained insight into the cell biology of RVs by harnessing the ability of RVs to evolve resistance against host-targeting small chemical compounds neutralizing endosomal pH, an important cue for uncoating of normal RVs. We show that RVs grown in cells treated with inhibitors of endolysosomal acidification evolved capsid mutations yielding reduced virion stability against elevated temperature, low pH, and incubation with recombinant soluble receptor fragments. This fitness cost makes it unlikely that RV mutants adapted to neutral pH become prevalent in nature. The data support the concept of host-directed drug development against respiratory viruses in general, notably at low risk of gain-of-function mutations.
Topics: Antiviral Agents; Capsid; Capsid Proteins; Drug Resistance, Viral; Endosomes; HeLa Cells; Humans; Hydrogen-Ion Concentration; Intercellular Adhesion Molecule-1; Mutation; Protein Conformation; Rhinovirus; Virion; Virus Internalization; Virus Uncoating
PubMed: 34705560
DOI: 10.1128/JVI.01060-21 -
International Journal of Infectious... Jul 2021The COVID-19 pandemic has called an urgent need for drug repurposing to improve the outcome of the disease. Quaternary ammonium compounds have been demonstrated to have... (Randomized Controlled Trial)
Randomized Controlled Trial
OBJECTIVE
The COVID-19 pandemic has called an urgent need for drug repurposing to improve the outcome of the disease. Quaternary ammonium compounds have been demonstrated to have antiviral effects and may be of use against SARS-CoV-2 infections.
DESIGN
In this double-blind, single-center study, we enrolled patients with positive PCR test and/or CT findings for COVID-19. The participants of each group were randomly assigned to Diphenhydramine Compound (Diphenhydramine + Ammonium Chloride) plus standard of care or to Diphenhydramine alone and standard of care groups. The primary outcome was all-cause mortality within 30 days of randomization. Secondary outcomes include viral burden, clinical status, assessed by a 5-point ordinal scale, and length of stay in hospitalized patients.
RESULTS
A total of 120 patients were included in the trial, 60 of which were assigned to the Ammonium Chloride group. The primary endpoint was not statistically different between the two groups (HR: 3.02 (95% CI, 0.57-16.06; p = 0.195)). Recovery time and viral burden were significantly lower in the Ammonium Chloride group, corresponding to an odds ratios of 1.8 (95% CI, 1.15-2.83; p = 0.01) and 7.90 (95% CI, 1.62-14.17; p = 0.014), respectively.
CONCLUSION
The findings of this study advocate the careful addition of Ammonium Chloride to standard of care for COVID-19 patients.
Topics: Ammonium Chloride; COVID-19; Humans; Outpatients; Pandemics; SARS-CoV-2; Standard of Care; Treatment Outcome
PubMed: 33878462
DOI: 10.1016/j.ijid.2021.04.043 -
Journal of Hazardous Materials Mar 2023Surfactants could influence sludge morphology and disinfectants were linked to antibiotic resistance genes (ARGs). Thus, the response of activated sludge and ARGs to...
Surfactants could influence sludge morphology and disinfectants were linked to antibiotic resistance genes (ARGs). Thus, the response of activated sludge and ARGs to long-term quaternary ammonium compounds (QACs) exposure required further investigation, which is a popular surfactant and disinfectant. Here, three sequencing batch reactors were fed with 5 mg/L most frequently detected QACs (dodecyl trimethyl ammonium chloride (ATMAC C12), dodecyl benzyl dimethyl ammonium chloride (BAC C12) and didodecyl dimethyl ammonium chloride (DADMAC C12)) for 180 d. The long-term inhibitory effect on denitrification ranked: DADMAC C12 > BAC C12 > ATMAC C12. Besides, obvious granular sludge promoted by the increase of α-Helix/(β-Sheet + Random coil) appeared in DADMAC C12 system. Moreover, intracellular ARGs increased when denitrification systems encountered QACs acutely but decreased in systems chronically exposed to QACs. Although replication and repair metabolism in ATMAC C12 system was higher, ATMAC C12 significantly promoted proliferation of extracellular ARGs. It was noteworthy that the propagation risk of extracellular ARGs in sludge increased significantly during sludge granulation process, and intracellular sul2 genes in sludge and water both increased with the granular diameter in DADMAC C12 system. The universal utilization of QACs may enhance antibiotic resistance of bacteria in wastewater treatment plants, deserving more attention.
Topics: Quaternary Ammonium Compounds; Sewage; Anti-Bacterial Agents; Ammonium Chloride; Drug Resistance, Microbial; Genes, Bacterial
PubMed: 36444811
DOI: 10.1016/j.jhazmat.2022.130464