-
The Saudi Dental Journal Dec 2020Ceramics can simulate the visual character of the tooth substance successfully and are biocompatible materials. However, a wide range of ceramic materials and systems on... (Review)
Review
OBJECTIVES
Ceramics can simulate the visual character of the tooth substance successfully and are biocompatible materials. However, a wide range of ceramic materials and systems on the market are available for use in dentistry. Therefore, it is the aim of this article to provide an overview of dental ceramics, their classifications, methods of construction, and clinically relevant aspects that enable the reader to select the most appropriate ceramic for a particular clinical situation.
MATERIAL AND METHODS
The PubMed (MEDLINE) search engine was used to gather the most recent information on dental ceramics. The search was restricted to a ten-year period (January 1, 2010-December 31, 2019) and only English-language studies. A Boolean search of the PubMed data set was implemented to combine a range of keywords: (ceramics OR all-ceramics OR dental porcelain OR polycrystalline OR porcelain fused to metal OR ceramometal OR procera OR e max OR zirconia OR In-ceram OR Inlays OR Onlays OR Overlays OR Endocrown) AND (survival rate OR success rate OR clinical outcomes OR classification) AND (humans). Studies were also obtained by manual searches and from Google Scholar.
RESULTS
By using this process, 2173 articles and studies were obtained. More studies were also obtained by manual searches and from Google Scholar. The most relevant published studies were chosen and used in the current review.
CONCLUSION
All-ceramic restoration use has increased in recent years. This increase has been attributed to patients' demand for good aesthetics and an improvement in the materials' mechanical and aesthetic properties as well as to required minimally invasive tooth preparation and the methods of fabrication. The success of ceramic restorations depends on several factors, such as selection of material, restoration design, occlusion, and cementation media.
PubMed: 34588757
DOI: 10.1016/j.sdentj.2020.05.004 -
Journal of Conservative Dentistry : JCD 2022Advances in adhesive technologies and escalation in esthetic demands have increased indications for tooth-colored, partial coverage restorations. Recently, material... (Review)
Review
BACKGROUND
Advances in adhesive technologies and escalation in esthetic demands have increased indications for tooth-colored, partial coverage restorations. Recently, material knowledge has evolved, new materials have been developed, and no systematic review has answered the question posed by practitioners: Is the clinical efficacy of resin or ceramic better, for inlay, onlay, and overlay in the long run?
AIM
The aim of this systematic review and meta-analysis was to evaluate the clinical performance of ceramic and resin inlays, onlays, and overlays and to identify the complication types associated with the main clinical outcomes.
MATERIALS AND METHODS
Two reviewers (VN and AJ) searched PubMed, Embase, and Cochrane Central registry of controlled trials for published articles between 1983 and 2020 conforming to Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines for systematic reviews. Only clinical studies which met the following criteria were included (1) studies regarding ceramic and resin inlays, onlays, and overlays were included; (2) randomized controlled trials, retrospective or prospective studies conducted in humans; (3) studies with a dropout rate <50% 4) studies with a follow-up higher than 5 years.
RESULTS
Of 1718 articles, 21 articles were selected. At 5 years, the estimated survival rates for resin ( = 129) was 86%, feldspathic porcelain ( = 1048) was 90%, and glass ceramic ( = 2218) was 92%; at 10 years, the survival of resin was 75% ( = 115), feldspathic porcelain was 91% ( = 1829), and glass ceramic was 89% ( = 1075).
CONCLUSION
The meta-regression indicated that ceramic partial coverage restorations (feldspathic porcelain and glass-ceramic) outperformed resin partial coverage restorations both at 5-year and 10-year follow-up. When compared between ceramic types, glass ceramics outperformed feldspathic porcelain at 5 years' follow-up and feldspathic porcelain outperformed glass ceramics at 10 years' follow-up. The failures were mostly due to fractures (6.2%), endodontic problems (3%), secondary caries (1.7%), and debonding which was 0.9%.
PubMed: 36187858
DOI: 10.4103/jcd.jcd_184_22 -
The International Journal of Esthetic... Jul 2023Important changes have occurred over the last decades in the clinical application of the strategies for posterior restorations - from amalgam to composites in direct... (Review)
Review
Clinical guidelines for posterior restorations based on Coverage, Adhesion, Resistance, Esthetics, and Subgingival management. The CARES concept: Part I – partial adhesive restorations.
Important changes have occurred over the last decades in the clinical application of the strategies for posterior restorations - from amalgam to composites in direct restorations and from traditional resistance form crowns to adhesive partial restorations such as onlays. Despite much evidence available for these advances, there are still very few established guidelines for common clinical questions: When does an indirect restoration present a clinical advantage over a direct one? When should one perform adhesive cusp coverage such as an onlay? When to implement resistance form designs in adhesive restorations? Which conditions create limitations for adhesion so that a resistance form preparation with a stiffer material such as a traditional crown might be more appropriate? In order to provide clinical guidelines, the present authors consider five parameters to support and clarify decisions - Coverage of cusps, Adhesion advantages and limitations, Resistance forms to be implemented, Esthetic concerns, and Subgingival management - the CARES concept. In Part I of this three-part review article, the focus is on clinical decisions for partial adhesive restorations regarding indications for direct versus indirect materials as well as the need for cusp coverage and/or resistance form preparations based on remaining tooth structure and esthetics.
Topics: Humans; Dental Restoration, Permanent; Esthetics, Dental; Tooth; Crowns; Inlays; Composite Resins
PubMed: 37462378
DOI: No ID Found -
Australian Endodontic Journal : the... Dec 2022The purpose of this study was to explore the effects of fibre-reinforced composites and onlay restorations on the fracture resistance of the cracked teeth. The...
The purpose of this study was to explore the effects of fibre-reinforced composites and onlay restorations on the fracture resistance of the cracked teeth. The experiments were grouped as follows: intact teeth, cracked teeth, crown; onlay; annular ribbond + onlay, laminated ribbond + onlay and fibre post + onlay; annular ribbond + crown, laminated ribbond + crown and fibre post + crown. The maximal Von Mises stress of dentin, the maximal Von Mises stress at the crack, the fracture resistance and fracture pattern under static loading were analysed by single-factor analysis of variance (ANOVA) and post-test by LSD. The annular ribbond + crown had a significant difference in fracture resistance than the crown (P < 0.05). The annular ribbond + onlay had more favourable fractures than crown in fracture pattern, and there were significant differences (P < 0.05). Compared with crown restoration, fibre-reinforced composites and onlay can improve the fracture resistance of the cracked teeth.
Topics: Humans; Tooth Fractures; Composite Resins; Dental Stress Analysis; Inlays; Cracked Tooth Syndrome; Tooth, Nonvital
PubMed: 34708907
DOI: 10.1111/aej.12578 -
The Journal of Prosthetic Dentistry Feb 2021The polycrystalline nature of zirconia hinders its ability to bond to tooth structure. Consequently, durable bonding to zirconia has been challenging. In vitro studies... (Review)
Review
STATEMENT OF PROBLEM
The polycrystalline nature of zirconia hinders its ability to bond to tooth structure. Consequently, durable bonding to zirconia has been challenging. In vitro studies have evaluated various methods of bonding to zirconia, but clinical data are sparse.
PURPOSE
The purpose of this systematic review was to critically appraise clinical studies investigating the survival rate of resin-bonded zirconia fixed partial dentures (FPDs), inlay-retained zirconia FPDs, and zirconia veneers.
MATERIAL AND METHODS
Searches were performed in MEDLINE, EMBASE, PubMed, Web of Science, Scopus, Cochrane Library, and Google Scholar. Clinical studies of over 12 months duration involving bonded zirconia restorations between 1990 and July 2018 were reviewed. All suitable studies were assessed for quality by using a "Questionnaire for selecting articles on Dental Prostheses".
RESULTS
Eight studies were ultimately included. Three studies examined posterior inlay-retained FPDs with estimated survival rates of 12.1% at 10 years, 95.8% at 5 years, and 100% at 20 months. Five studies reviewed anterior, resin-bonded FPDs, all of which had a 3- to 10-year survival rate of 100%. Debonds occurred in all studies, but the prostheses could usually be rebonded.
CONCLUSIONS
With correctly designed buccal and lingual coverage retainers and minimal if any veneering porcelain, zirconia-based, posterior, inlay-retained FPDs seem to have a high clinical survival rate. The role of bonding efficacy in this survival rate is unknown. Anterior, cantilevered, resin-bonded zirconia FPDs seem to have a high clinical survival rate. While these prostheses can debond, fracture of the entire prosthesis is unlikely, so they may be rebonded. To bond zirconia, the use of airborne-particle abrasion with 50-μm alumina (AlO) at 0.1 to 0.25 MPa in combination with a phosphate monomer-containing adhesive resin is recommended until further studies become available. Dental dam isolation is also recommended during zirconia bonding.
Topics: Dental Bonding; Dental Materials; Dental Porcelain; Denture Design; Denture, Partial, Fixed; Treatment Outcome; Zirconium
PubMed: 32115220
DOI: 10.1016/j.prosdent.2019.12.017 -
Journal of Esthetic and Restorative... Jan 2021Immediate dentin sealing implies applying an adhesive system to dentin directly after tooth preparation, before impression. The technique is universal (inlays, onlays,...
BACKGROUND
Immediate dentin sealing implies applying an adhesive system to dentin directly after tooth preparation, before impression. The technique is universal (inlays, onlays, veneers, crowns) and well documented clinically and experimentally. Different types of dentin bonding agents (DBAs) are available on the market. Major differences lie in the thickness of the hybrid layer and overlaying adhesive resin (filled vs. unfilled/lightly filled adhesives).
OBJECTIVE
The objective of this work is to provide precise clinical instructions and present new experimental data about the bond strength of five DBAs (Optibond FL, Scotchbond MP, Single Bond Plus, Clearfil SE Bond, and Scotchbond Universal) used conventionally (dentin sealed at the time of restoration delivery) or with immediate dentin sealing, as well as with an additional flowable resin coating.
METHODS
Seventy-five human molars were selected, restored/tested according the microtensile bond strength method. Fifteen groups (n=5) were obtained from the combination of the five DBAs and three application modes: delayed dentin sealing, immediate dentin sealing and immediate dentin sealing with flowable resin coating.
RESULTS
It appears that immediate dentin sealing was confirmed to significantly improve the bond strength of all tested adhesives. The use of a flowable resin coating reinforcement after immediate dentin sealing increased the microtensile bond strength of all unfilled/lightly filled adhesives (from 233% of increase for ScotchBond MP, up to 560% for Clearfil SE Bond) and maintained the performance of the 3-step golden standard adhesive. Optibond FL used with (52.51 MPa) or without (54.75 MPa) additional flowable resin coating and Clearfil SE Bond (45.64 MPa) used with flowable resin coating provided the best results.
CLINICAL SIGNIFICANCE
The original immediate dentin sealing (IDS) technique implies the use of a filled DBA. With unfilled/lightly filled adhesives, it is suggested to reinforce IDS with an additional flowable resin coating. This seems especially paramount to the performance of simplified adhesive systems to protect the thin bonding interface from oxygen inhibition and preserve IDS layer during predelivery cleaning of the preparation. The clinical reinforcement of unfilled/lightly filled IDS with flowable resin composite is encouraged for more predictable bonding.
Topics: Composite Resins; Dental Bonding; Dental Cements; Dentin; Dentin-Bonding Agents; Humans; Materials Testing; Resin Cements; Surface Properties; Tensile Strength
PubMed: 33404184
DOI: 10.1111/jerd.12700 -
Biology of keratorefractive surgery- PRK, PTK, LASIK, SMILE, inlays and other refractive procedures.Experimental Eye Research Sep 2020The outcomes of refractive surgical procedures to improve uncorrected vision in patients-including photorefractive keratectomy (PRK), laser in-situ keratomileusis... (Review)
Review
The outcomes of refractive surgical procedures to improve uncorrected vision in patients-including photorefractive keratectomy (PRK), laser in-situ keratomileusis (LASIK), Small Incision Lenticule Extraction (SMILE) and corneal inlay procedures-is in large part determined by the corneal wound healing response after surgery. The wound healing response varies depending on the type of surgery, the level of intended correction of refractive error, the post-operative inflammatory response, generation of opacity producing myofibroblasts and likely poorly understood genetic factors. This article details what is known about these specific wound healing responses that include apoptosis of keratocytes and myofibroblasts, mitosis of corneal fibroblasts and myofibroblast precursors, the development of myofibroblasts from keratocyte-derived corneal fibroblasts and bone marrow-derived fibrocytes, deposition of disordered extracellular matrix by corneal fibroblasts and myofibroblasts, healing of the epithelial injury, and regeneration of the epithelial basement membrane. Problems with epithelial and stromal cellular viability and function that are altered by corneal inlays are also discussed. A better understanding of the wound healing response in refractive surgical procedures is likely to lead to better treatments to improve outcomes, limit complications of keratorefractive surgical procedures, and improve the safety and efficiency of refractive surgical procedures.
Topics: Corneal Surgery, Laser; Humans; Keratomileusis, Laser In Situ; Keratoplasty, Penetrating; Lasers, Excimer; Myopia; Photorefractive Keratectomy; Refraction, Ocular
PubMed: 32653492
DOI: 10.1016/j.exer.2020.108136 -
BMC Oral Health Dec 2021How long do lithium disilicate restorations last before they fail? The aim of this study was to assess the success rate of four different types of restorations made from...
BACKGROUND/PURPOSE
How long do lithium disilicate restorations last before they fail? The aim of this study was to assess the success rate of four different types of restorations made from lithium disilicate.
MATERIALS AND METHODS
A total of 87,203 ceramic restorations, classified into four different types (inlay or onlay, veneers (Vs), single crowns (SCs), and fixed partial dentures (FPDs)), were used. All were made of lithium disilicate (IPS e.Max CAD) with Cerec Inlab CAD/CAM system (Sirona Dental Systems, Bensheim, Germany). They were reported by dentists and entered in the database of the private B&R Dental Center between March 2015 and June 2020 and assessed retrospectively up to a period of 5 years based on the following parameters: failure rate and cause of failures (ceramic fracture, debonding, marginal adaptation, color match, endodontic intervention, periodontal disease, and secondary caries). Failure distribution according to gender, arch, and teeth type was also evaluated. The time-dependent time-to-failure/complication and their differences were calculated in months according to the Kaplan Meier and log-rank tests. The Chi-squared test (p 0.05) was used to assess the variations in causes of failure rates between different restorations.
RESULTS
Kaplan Meier test showed overall cumulative survival probability of lithium disilicate restorations for up to years was 85.08%. Inlay/onlay and Vs ceramic restorations showed highest cumulative survival probability (99.4%, 98.6, respectively). FPDs had the least cumulative survival probability (52.9%) which was significantly (P < 0.00001) higher than for other ceramic restorations using the log-rank test. Moreover, overall time-dependent time-to-failure/complication occurred after 52.373 months according to Kaplan-Meier (CI: lower bound: 51.875 months; upper bound: 52.871 months). Ceramic fracture in both FPDs and SCs (27.6% and 26.6%, respectively) and debonding in Vs (12.7%) were significant as the main reasons for failure (P = 0.000). The failure rate was significantly higher for the maxillary arch than the mandibular arch (P = 0.021). Fracture and marginal discrepancy were more frequent in the molar region (77.5% and 14.75%, respectively) and significantly higher here than in the anterior and premolar regions (P = 0.000).
CONCLUSION
The medium-term performance of lithium disilicate is ideal. Ceramic fracture was the most common cause of failure in SCs and FPDs. FPDs presented with the highest failure rate based on evaluation for up to 5 years.
Topics: Ceramics; Computer-Aided Design; Crowns; Dental Porcelain; Dental Restoration Failure; Humans; Retrospective Studies
PubMed: 34876103
DOI: 10.1186/s12903-021-01987-1 -
Dental Materials : Official Publication... Aug 2022The loss of the dental coronal portion following carious lesions or fractures leads to endodontic treatment with subsequent restoration to ensure correct anatomy and... (Meta-Analysis)
Meta-Analysis Review
OBJECTIVE
The loss of the dental coronal portion following carious lesions or fractures leads to endodontic treatment with subsequent restoration to ensure correct anatomy and function. Recently, partial adhesive restorations have been widely proposed to increase the survival rate of endodontically treated teeth. The primary purpose of this review is to assess the failure rate of indirect partial adhesive restorations on endodontically treated teeth (ETT), considering the follow-up period.
METHODS
The indications reported in the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) were used to draft the present review. The study was constructed on PICO questions: population (patients who need indirect adhesive restorative treatment on endodontically treated teeth with onlay and overlay), intervention (onlay and overlay), control (patients with onlay and overlay on endodontically treated teeth) and outcome (failure rate and types of failure for onlay and overlay). The asked scientific question was: what are the failure rate and types of failure for adhesive indirect partial restorations on ETT?
RESULTS
The overall failure rate that emerges is 0.087 with a ratio of 121/1254, I 80 % p-value< 0.001. Moreover, by meta-regression with covariates the follow-up period reports a coefficient of 0.013 with a P-value< 0.001. In conclusion, the indirect partial restorations on endodontically treated teeth displayed overall acceptable outcomes in terms of success from 2 to 4 years after their placement with only 4.32 % of failure. Failures increase after 7 years up to 12-30 years with failure rates of approximatively 10.65 % and 20.94 %. The analysis of the included articles reporting the causes of restorations failures showed that 15.51 % of cases were related to the loss of dental element.
SIGNIFICANCE
Besides the survival rates of indirect adhesive restorations on endodontically treated posterior teeth, it was highlighted that the majority of failures appeared restorable. Thus, partial restorations seemed able to prevent the ETT tooth loss.
Topics: Composite Resins; Dental Restoration Failure; Dental Restoration, Permanent; Humans; Inlays; Prognosis; Tooth, Nonvital
PubMed: 35835608
DOI: 10.1016/j.dental.2022.06.018 -
Experimental Eye Research Apr 2021Presbyopia is a growing problem in view of an aging global population and increasingly patients desire spectacle-free solutions to address this condition. Surgically... (Review)
Review
Presbyopia is a growing problem in view of an aging global population and increasingly patients desire spectacle-free solutions to address this condition. Surgically implanted corneal inlays have been the topic of renewed research efforts in the past several years as a treatment option for presbyopia, with several approaches being used to modify the refractive properties of the cornea and enhance near vision. In this review we discuss historical approaches to corneal inlay surgery, critically appraise the current generation of presbyopia-correcting corneal inlays and their associated complications and consider the future prospects for emerging corneal inlay technologies that aim address the shortcomings of currently available inlays.
Topics: Aging; Corneal Stroma; Humans; Presbyopia; Prostheses and Implants; Prosthesis Implantation; Refraction, Ocular; Visual Acuity
PubMed: 33524364
DOI: 10.1016/j.exer.2021.108474