-
Journal of Clinical Imaging Science 2022To examine the skeletal, dental, and soft-tissue cephalometric effects of class II correction using Invisalign's mandibular advancement feature in growing patients.
OBJECTIVE
To examine the skeletal, dental, and soft-tissue cephalometric effects of class II correction using Invisalign's mandibular advancement feature in growing patients.
MATERIALS AND METHODS
A retrospective cohort clinical study was performed on cases that were started between 2017 and 2019. A total of 32 patients (13 females, 19 males), with an average age of 13 years old (9.9-14.8 years) had undergone Invisalign treatment (Align Technology, Inc., San Jose, CA) wherein the mandibular advancement phase was completed were included. Photos, digital study models, and cephalograms were taken once during the patients' initial visit and again upon completing the mandibular advancement phase of treatment. The number of aligners worn and the time of treatment in months was recorded for each subject. Cephalometric analysis was performed and overjet and overbite were measured. Statistical analysis was performed using SPSS statistical software (version 25; SPSS, Chicago, Ill) and the level of significance was set at <0.05. Descriptive statistics were performed to generate means and differences for each cephalometric measurement as well as patient data including age, treatment time, and aligner number. Differences between measurements from patients before treatment (T1) and after treatment (T2) with the mandibular advancement feature were evaluated using a paired -test.
RESULTS
All 32 patients had multiple jumps staged for the precision wings, i.e., incremental advancement. The average length of treatment for the MA phase was 9.2 months (7.5-13.8 months) and the average number of aligners used during this time was 37 (30-55). Statistically significant differences between T1 and T2, in favor of class II correction, were observed in the ANB angle, WITS appraisal, facial convexity, and mandibular length. The nasolabial angle, overjet, and overbite also showed statistically significant changes between T1 and T2.
CONCLUSION
Invisalign aligners with the mandibular advancement feature took approximately 9 months for 1.5 mm of overjet correction. The lower incisor angulation was maintained during class II correction. The minimal skeletal changes are in favor of class II correction.
PubMed: 36128356
DOI: 10.25259/JCIS_64_2022 -
Jornal de Pediatria 2021To evaluate the orofacial characteristics of very low-birth-weight preterm infants through anthropometric facial measures, orofacial anteroposterior analysis and the...
OBJECTIVE
To evaluate the orofacial characteristics of very low-birth-weight preterm infants through anthropometric facial measures, orofacial anteroposterior analysis and the relationship between the gum pads.
METHOD
Orofacial examinations was performed in 154 infants, classified into two groups: Group A comprised 54 very low-birth-weight infants who were examined after clinical stabilization and before hospital discharge, and Group B comprised 100 full-term infants.
RESULTS
The average anthropometricmeasurements in millimetres for Group A and Group B were as follows: upper third:30.2 and 31.1; middle third: 24.2 and 25.9; lower third: 27.6 and 29.9; facial width: 64.8and 81.4. Regarding the orofacial anteroposterior analysis, the results showed that in99% of these infants, the mandible was in a retrognathic position relative to the maxilla.Group A and Group B had the following distributions of the relationship between thegum pads: overbite-overjet: 43% and 77%; overjet: 39% and 17%; open bite: 15% and3%; end-to-end: 2% and 1%; overbite: both 2%.
CONCLUSION
The very low-birth-weight preterm infants showed the upper third with the highest values in the facialharmony analysis, followed by the lower third and the middle third; and exhibited themandible in a retrognathic position relative to the maxilla, and with overbite-overjet themost prevalent type of gum pad relationship. The study emphasizes the importance of orofacial examination during neonatal hospitalization and the investigation of birth weight and gestational age in a multidisciplinary therapeutic approach that includes orofacial neonatal evaluation and actions that promote oral health, besides foster follow-up studies.
Topics: Birth Weight; Gestational Age; Humans; Infant; Infant, Newborn; Infant, Premature; Infant, Very Low Birth Weight; Patient Discharge
PubMed: 32084437
DOI: 10.1016/j.jped.2019.12.005 -
BMC Oral Health Jul 2022Occlusal characteristics of the primary dentition are crucial in predicting and determining permanent tooth alignment and occlusion. The aim of our study was to...
BACKGROUND
Occlusal characteristics of the primary dentition are crucial in predicting and determining permanent tooth alignment and occlusion. The aim of our study was to determine the occlusal characteristics of the primary dentition of 5-year-old children in Greece through a national pathfinder survey.
METHODS
A stratified cluster sample of 1222 5-year-old children was selected according to the WHO guidelines for national pathfinder surveys. Five occlusal traits were registered clinically in centric occlusion, separately for the left and right sides: sagittal relationships of the second primary molars and primary canines, overjet, overbite, crossbite, and maxillary and mandibular spacing.
RESULTS
Most children showed a flush terminal plane of primary second molars (44.8%), a class I primary canine relationship (52.2%) and normal overjet (46.4%), but a high prevalence of Class II canine relationship (25.6%) and overjet (37.8%) were also observed. A normal overbite was found in 40% of the children and 40% had a deep overbite. Spacing was apparent in both maxilla (71.1% of children) and mandible (56.4%). The prevalence of open bite and distal step molar relationship significantly rose in children with non-nutritive sucking habits.
CONCLUSIONS
Νon-nutritive habits were associated to altered occlusal features. No sex significant differences were found in either the sagittal relationships of second primary molars and primary canines, or overjet, overbite, crossbite and spacing.
Topics: Child, Preschool; Cross-Sectional Studies; Greece; Humans; Malocclusion; Malocclusion, Angle Class II; Open Bite; Overbite; Prevalence; Tooth, Deciduous
PubMed: 35810281
DOI: 10.1186/s12903-022-02303-1 -
Journal of International Society of... 2022The aim of this article is to establish a comprehensive nation-wide prevalence of malocclusion traits on the sagittal, vertical, and transverse planes of space in Saudi... (Review)
Review
OBJECTIVES
The aim of this article is to establish a comprehensive nation-wide prevalence of malocclusion traits on the sagittal, vertical, and transverse planes of space in Saudi Arabia.
MATERIALS AND METHODS
A systematic search was conducted in three databases (Medline via PubMed, Embase, and Web of Science) and complemented with a manual search of Google Scholar and the reference list of included studies. Original studies of Saudi Arabian healthy individuals at any age were included. The quality and the risk of bias of the included studies were assessed using the Joanna Briggs Institute's appraisal tool. The data about the selected malocclusion traits on the sagittal, vertical, and transverse planes of space were extracted and pooled.
RESULTS
Out of 7163 identified titles, 11 studies were finally included. The risk of bias was high in two studies, moderate in eight studies, and low in one study. The studied age groups were from early childhood to late adulthood, with a total sample size of 19,169 participants. The majority of the studies recruited their sample from school/public sources, whereas the remaining three studies recruited their sample from dental (non-orthodontic) clinics.
CONCLUSIONS
Within the limitations of this study, pooled prevalence of Angle's Class I molar relation in Saudi Arabia was similar to other populations but Angle's Class II and Class III molar relations were lower and higher, respectively. These differences could be attributed to population-related differences in craniofacial morphology. Teeth crowding, teeth spacing, and midline shift, along with increased overjet and overbite, were among the most common malocclusion traits occurring in Saudi Arabia.
PubMed: 35281679
DOI: 10.4103/jispcd.JISPCD_251_21 -
Journal of Dentistry Feb 2022The aim of this longitudinal cohort study was to investigate the changes in incisor relationship over three decades from adolescence to mid-adulthood.
OBJECTIVE
The aim of this longitudinal cohort study was to investigate the changes in incisor relationship over three decades from adolescence to mid-adulthood.
MATERIALS AND METHODS
The sample included 1,037 children (48.4% female) born between April 1972 and March 1973 from the longitudinal birth cohort Dunedin Multidisciplinary Health and Development Study. Overjet and overbite values were assessed at age 15 and 45 years and entered in a regression model as outcome variables. Baseline occlusal variables, sex, history of orthodontic treatment, periodontal data recorded at age 38, and self-reported oral parafunction and orthodontic treatment history recorded at age 45 were entered as covariates in the regression analysis.
RESULTS
Regression modelling showed that overjet/overbite category (high or low) at age 15 tends to predict overjet/overbite category at age 45, with overjet become slightly larger (around +0.5 mm) and overbite slightly lower (-0.5 mm) over time. Study members with self-reported tooth clenching had a slighter greater overbite (+0.3 mm) at age 45 than those who did not. Additionally, those with signs of periodontal disease at age 38 had a slightly larger overjet (+0.5 mm) at age 45 than those without disease. Sex differences were demonstrated with females having 0.6 mm larger overjet, and 0.4 mm overbite at age 45.
CONCLUSIONS
Overall, overjet values tend to be higher during mid-adulthood than during adolescence, while the converse is true for overbite. There appears to be a degree of sexual dimorphism in overjet and overbite values later in life.
CLINICAL SIGNIFICANCE
Incisor relationships change during the life course and are related to ageing, sex, periodontal health, and parafunctional habits. Clinicians and educators should be aware of these changes when making treatment decisions that alter incisor relationship.
Topics: Adolescent; Adult; Child; Cohort Studies; Female; Humans; Incisor; Life Change Events; Longitudinal Studies; Male; Malocclusion; Middle Aged; Overbite; Young Adult
PubMed: 34896441
DOI: 10.1016/j.jdent.2021.103919 -
The Angle Orthodontist Jan 2024To determine whether achieved outcome regarding overjet and overbite matched the predicted outcome following treatment with Invisalign (Align Technology, San Jose,...
OBJECTIVES
To determine whether achieved outcome regarding overjet and overbite matched the predicted outcome following treatment with Invisalign (Align Technology, San Jose, Calif) aligner appliances.
MATERIALS AND METHODS
Data including pretreatment, predicted and achieved overjet, and overbite measurements provided by Align's digital treatment facility, ClinCheck Pro, were evaluated. Descriptive statistics, Mann-Whitney U-test, and Wilcoxon rank-sum intraclass correlation (ICC) test results were calculated.
RESULTS
From an initial sample of 600, 355 adult patients satisfied the inclusion and exclusion criteria. ICC scores for data input were excellent. Median (interquartile range [IQR]) age was 30.14 (23.33, 39.92) years and most (n = 259; 72.95%) were women. Almost one-third (n = 101; 28.45%) had undergone extraction as part of their treatment. More aligners were prescribed in the initial digital treatment plan for patients (median, 44; IQR: 35, 51.5; minimum, 17; maximum, 92) undergoing extractions as part of their orthodontic treatment than those who were not (median, 24; IQR: 18.25, 32; minimum, 13; maximum, 85) (P < .0001). Planned changes in overjet differed significantly from achieved outcomes (P < .001). Planned increases in overbite resulted in up to more than twice (222.72%) as much increase than predicted. Planned reduction of overbite achieved 8.69% of its predicted reduction in extraction cases.
CONCLUSIONS
Achieved overjet and overbite measurements differed significantly from the predicted outcomes at the end of an initial sequence of aligners. Planned increases in overbite resulted in greater overbite correction than predicted, particularly in extraction cases. Planned overbite reduction was challenging, especially in patients with extractions.
Topics: Adult; Humans; Female; Male; Overbite; Retrospective Studies; Malocclusion, Angle Class II; Orthodontic Appliances, Removable; Dental Care
PubMed: 37839803
DOI: 10.2319/030923-161.1 -
BMC Oral Health Jun 2024This study aims to evaluate the prevalence of malocclusion and orthodontic features among schoolchildren in the West Bank, Palestine.
BACKGROUND
This study aims to evaluate the prevalence of malocclusion and orthodontic features among schoolchildren in the West Bank, Palestine.
METHODS
A stratified cluster sample of 1278 schoolchildren (620 males, 658 females, mean age 12 years and 5 months (± 0.5)) were examined. Candidates who had not received any previous orthodontic treatment were only included. Dental anomalies like missing and ectopic teeth were recorded. The anteroposterior occlusal relationship was assessed based on Angle classification. Overjet and overbite were measured. Crowding and spacing were recorded subjectively. In addition, crossbite, openbite, and midline displacement were recorded. The chi-square test and descriptive analysis were used statistically.
RESULTS
The study found Angle Class I molar relationship in 65%, Class II div 1 in 17%, Class II div 2 in 6%, and Class III in 12% of the sample. An overjet (OJ) of more than 4 mm was present in 17%, and 4% had OJ of more than 6 mm; an OJ of at least 0 mm or less in 36%, and 6% had a reverse OJ. A normal overbite was observed in 53%, while 28% had an increase and 19% had a decreased overbite. An anterior openbite (AOB) was present in 9%, and a scissor bite or anterior crossbite in 6% and 14%, respectively. A posterior crossbite was observed in 12% (9% unilateral and 3% bilateral). Midline displacement was found in (9%). Crowding was observed in 35% and 31% and spacing in 24% and 15% of the maxillary and mandibular arches, respectively. A statistically significant relationship between gender and midline shift, a diastema, spacing in the upper arch, and most dental anomalies was found; males were more affected (p < 0.05).
CONCLUSION
This study reported a high prevalence of malocclusion among schoolchildren in Palestine. A collaborative effort should be directed to obtain more monitoring and surveillance of malocclusion more frequently to prevent and control the exacerbation of the problem.
Topics: Humans; Male; Female; Malocclusion; Child; Prevalence; Overbite; Malocclusion, Angle Class II; Arabs; Malocclusion, Angle Class III; Diastema; Malocclusion, Angle Class I; Middle East; Open Bite; Tooth Eruption, Ectopic; Anodontia; Sex Factors; Adolescent
PubMed: 38849789
DOI: 10.1186/s12903-024-04432-1 -
Journal of Clinical Medicine Feb 2021The aim of this study was to assess the effect of overjet and overbite on profile shape in middle-aged individuals.
BACKGROUND
The aim of this study was to assess the effect of overjet and overbite on profile shape in middle-aged individuals.
METHODS
The study population comprised 1754 46-year-old individuals, members of the 1966 Northern Finland Birth Cohort. Their profile images were digitized using 48 landmarks and semi-landmarks. The subsequent landmark coordinates were then transformed to shape coordinates through Procrustes Superimposition, and final data were reduced into Principal Components (PCs) of shape. Overjet and overbite values were measured manually, during a clinical examination. A multivariate regression model was developed to evaluate the effect of overjet and overbite on profile shape.
RESULTS
The first nine PCs described more than 90% of profile shape variation in the sample and were used as the shape variables in all subsequent analyses. Overjet predicted 21.3% of profile shape in the entire sample (ηoverjet = 0.213; < 0.001), while the effect of overbite was weaker (ηoverbite = 0.138; < 0.001). In males, the equivalent effects were 22.6% for overjet and 14% for overbite, and in females, 25.5% and 13.5%, respectively.
CONCLUSION
Incisor occlusion has a noteworthy effect on profile shape in middle-aged adults. Its impact becomes more significant taking into consideration the large variety of genetic and environmental factors affecting soft tissue profile.
PubMed: 33671163
DOI: 10.3390/jcm10040800 -
American Journal of Orthodontics and... Dec 2023This study aimed to quantify the outcomes of adolescent patients with Class II malocclusion treated with the Carriere Motion 3D Appliance (CMA) combined with full fixed...
INTRODUCTION
This study aimed to quantify the outcomes of adolescent patients with Class II malocclusion treated with the Carriere Motion 3D Appliance (CMA) combined with full fixed appliances.
METHODS
Cone-beam computed tomography scans of 22 patients were available before orthodontic treatment (T1), at removal of the CMA (T2), and posttreatment (T3). The average age of the patients was 13.5 ± 1.6 years at T1, 14.1 ± 0.2 years at T2, and 15.6 ± 0.5 years at T3. The 3-dimensional image analysis procedures were performed using ITK-SNAP (version 3.6.0; www.itksnap.org, Hatfield, Pa) and SlicerCMF (version 4.11.0; http://www.slicer.org, Cambridge, Mass); skeletal and dentoalveolar changes relative to cranial base, maxillary, and mandibular regional superimpositions were evaluated.
RESULTS
Changes were analyzed with 1 sample t tests using the mean differences during the CMA phase (T1 to T2) and total treatment time (T1 to T3). Significant skeletal changes included a slight reduction of ANB from T1 to T3, mandibular growth (Co-Gn increment of 1.2 mm and 3.3 mm from T1 to T2 and T1 to T3, respectively), inferior displacement of point A, and anterior and inferior displacement of point B. The mandibular plane did not change significantly during treatment. During the CMA treatment, posterior tipping and distal rotation of the maxillary molars, tip back and inferior displacement of the maxillary canines, significant mesial rotation, and superior displacement of the mandibular molars were observed. These movements rebounded during the full fixed appliance phase except for the molar and canine vertical displacements. Clinically significant dental changes during treatment included a reduction in overjet and overbite, Class II correction of the molar and canine relationship, and proclination of the mandibular incisors.
CONCLUSIONS
The CMA is an effective treatment modality for Class II correction in growing patients because of a combination of mesial movement of the mandibular molar, distal rotation of the maxillary molar, and anterior displacement of the mandible.
Topics: Adolescent; Humans; Child; Cephalometry; Orthodontic Appliances, Functional; Malocclusion, Angle Class II; Overbite; Mandible; Maxilla; Orthodontic Appliance Design
PubMed: 37598337
DOI: 10.1016/j.ajodo.2023.05.031 -
European Journal of Orthodontics Jun 2021This prospective cohort study investigated the short term effects of interceptive orthodontic treatment with a removable expansion plate, evaluating the changes in...
OBJECTIVES
This prospective cohort study investigated the short term effects of interceptive orthodontic treatment with a removable expansion plate, evaluating the changes in occlusion in all its dimensions: transversal, sagittal and vertical.
SUBJECTS AND METHODS
A total of 226 patients treated with a removable expansion plate (slow maxillary expansion, SME) by orthodontic residents at the Department of Orthodontics, University Hospitals Leuven, Belgium were included. The patients had a mean age of 8.5 years at the start of the treatment. The mean treatment time was 6.9 months. Transversal measurements (intercanine and intermolar width) and occlusal characteristics (molar occlusion, overjet, overbite and functional shift) were collected before (T0) and after active treatment (T1). Statistical analysis was performed using the Wilcoxon signed rank test, Sign test and McNemar test for assessing changes between T0 and T1. Linear models were used to assess the associations between patient factors and the amount of expansion.
RESULTS
A significant increase in transversal width at different occlusal landmarks was found. Correction of unilateral, bilateral and frontal crossbites was successful in 99.0%, 95.2% and 93.6% of the cases respectively. Changes in sagittal molar occlusion were significant: 64.9% (right side) and 62.6% (left side) remained stable, 28.4% (right) and 29.3% (left) improved and 6.7% (right) and 8.1% (left) deteriorated. Overbite changes were found to be statistically significant, though clinically irrelevant. Overjet changes were non-significant.
CONCLUSIONS
A removable expansion plate is successful in improving the transversal dental dimensions of the maxilla. Statistically significant sagittal effects on molar occlusion were found. Long-term follow-up is needed to evaluate the long-term stability of this treatment.
Topics: Cephalometry; Child; Dental Arch; Follow-Up Studies; Humans; Malocclusion; Maxilla; Orthodontic Appliance Design; Palatal Expansion Technique; Prospective Studies
PubMed: 33830217
DOI: 10.1093/ejo/cjab006