-
Clinical and Experimental Dental... Dec 2023Temporomandibular disorders (TMD) are a group of clinical conditions involving muscles of mastication, temporomandibular joint (TMJ), and related structures or both. TMD...
OBJECTIVES
Temporomandibular disorders (TMD) are a group of clinical conditions involving muscles of mastication, temporomandibular joint (TMJ), and related structures or both. TMD is characterized by facial pain in TMJ and muscles of mastication, limitation or deviation of jaw movement, and TMJ sounds during jaw movement and function. The highest risk of TMD prevalence is between 18 and 24 years, and a relationship is between chronic TMD and psychological disorders such as stress and depression. The knowledge of the function of this joint and those with TMD symptoms when visiting the dentist will help to provide an ideal treatment plan for the patient. Therefore, if the therapist is familiar with the various etiological factors of this disorder, he will provide better treatment, especially if the simultaneous effect of psychological factors such as stress and obsessive-compulsive disorder (OCD) along with occlusal factors such as posterior cross-bite, overjet, and overbite is measured, it can be a valuable guide for clinicians.
METHODS AND MATERIALS
In this study, 385 patients were examined by DASS42 and Maudsley's test and classified into normal, with stress, and stress plus OCD groups. TMJ was examined for each of them by the TMD-RDC test. The presence or absence of TMD was noted in their file.
RESULTS
The prevalence of TMD was 20.7% in the normal group, 30.70% in the stress group, and 44.68% in the stress and OCD group. After analyzing the data by SPSS 24 and performing analysis of variance and Duncan tests, no significant difference was found between the probability of TMD in normal and stressed groups, but the stress and OCD group has a higher chance of TMD.
CONCLUSION
Although the co-occurrence of stress and OCD is associated with the prevalence of TMD, it cannot be considered a cause of TMD.
Topics: Male; Humans; Temporomandibular Joint Disorders; Temporomandibular Joint; Facial Pain; Mastication; Overbite; Obsessive-Compulsive Disorder
PubMed: 37840225
DOI: 10.1002/cre2.798 -
Cranio : the Journal of... Feb 2022To three-dimensionally evaluate the position and morphology of the TMJ in skeletal Class I with variable degrees of overbite and overjet in comparison with normal peers.
OBJECTIVE
To three-dimensionally evaluate the position and morphology of the TMJ in skeletal Class I with variable degrees of overbite and overjet in comparison with normal peers.
METHODS
Pretreatment CBCT scans of 126 adults were retrieved. Based on the severity of overjet and overbite, the sample was divided into three main groups and six subgroups (18 patients each): the first group with a normal overbite and variable overjet degree and the second group with normal overjet and variable overbite degree. These six subgroups were compared with a third control group of normal overjet and overbite.
RESULTS
There were significant differences in vertical condylar position, vertical and anteroposterior condylar inclinations, condylar height, and significant posterior condylar positioning in severe deep overbite, compared with the control group.
CONCLUSION
There were significant changes in the TMJ components in severe deep overbite cases. Therefore, sever deep overbite could be considered a predisposing factor for temporomandibular disorders.
PubMed: 35102813
DOI: 10.1080/08869634.2022.2028114 -
The Angle Orthodontist Nov 2019To examine normal Overbite Depth Indicator (ODI) and Anteroposterior Dysplasia Indicator (APDI) values in African Americans and to compare them with mean values from...
OBJECTIVES
To examine normal Overbite Depth Indicator (ODI) and Anteroposterior Dysplasia Indicator (APDI) values in African Americans and to compare them with mean values from white patients. Secondary aims were to compare mean ODI and APDI values among different age, gender, and combined age-gender groups in African American patients.
MATERIALS AND METHODS
Lateral cephalometric radiographs of 160 African American patients (97 boys and 63 girls; age, 7 to 14 years) with normal occlusion and no history of orthodontic treatment were collected from the Bolton-Brush Growth Center. Cephalometric images were hand traced, and ODI and APDI values were assessed. Two-sample tests were used to compare mean ODI and APDI values between African American and white patients; and between male and female African American patients. One-way analysis of variance, followed by the Tukey test, was used to compare mean ODI and APDI values among different African American age and combined age-gender groups.
RESULTS
Mean ODI and APDI values were significantly lower ( < .0001) in African American than white patients with normal occlusion and no history of orthodontic treatment. Mean ODI and APDI values increased with age in African American patients, and there were no significant gender differences.
CONCLUSIONS
The mean ODI and APDI values in 7- to 14-year-old African Americans with normal occlusion and no history of orthodontic treatment were 70.9° and 78.1°, respectively, and were significantly lower than the mean values for white patients in the same age range.
Topics: Adolescent; Black or African American; Cephalometry; Child; Female; Humans; Male; Malocclusion, Angle Class II; Overbite; Reference Values; White People
PubMed: 31306073
DOI: 10.2319/021619-116.1 -
Materials (Basel, Switzerland) Mar 2021The aim of this study was to assess the skeletal and dentoalveolar changes obtained after 1 year of treatment with elastodontic appliances (EA) in a retrospective cohort...
The aim of this study was to assess the skeletal and dentoalveolar changes obtained after 1 year of treatment with elastodontic appliances (EA) in a retrospective cohort of children reporting early signs of malocclusion. Also, a detailed description of the tested EAs was reported. The study sample included 20 subjects, 8 males and 12 females, with a mean age of 8.4 ± 0.6 years, and a control group consisting of 20 subjects, 9 males and 11 females, with a mean age of 8.1 ± 0.8 years. All subjects in the treated group received the AMCOP second class (SC) (Ortho Protec, Bari, Italy) device. Digital impressions were taken along with a digital bite registration in centric relation before treatment (T0) and after 1 year (T1). Lateral cephalograms were also taken at T0 and T1 and cephalometric analysis was performed to assess the skeletal sagittal changes of the maxilla and the mandible (sella, nasion, A point angle, SNA^; sella, nasion, B point angle, SNB^; and A point-nasion-B point angle, ANB^) as well as the changes of the inter-incisors angle (IIA^). In the treated group, the distribution of subjects according to the presence of crowding and the pattern of malocclusion changed at T1. In the same group, there was an increase of subjects showing no signs of crowding and a class I occlusal relationship, while in the control group, there was a small increase of subjects developing dental crowding and featuring a worse sagittal relationship (class II) compared to pre-treatment condition. A statistically significant reduction of the overjet and overbite was recorded in the treated group between T0 and T1 ( < 0.05); in the control group, a slight increase in the overjet and overbite was detected at T1, being this increment significanct only for the latter parameter. In the tested group, no significant differences were found between SNA^ values detected at T0 and T1 ( > 0.05), instead the SNB^, ANB^, and IIA^ showed a significant increase after 1 year of treatment ( < 0.05). From a clinical perspective, all clinical goals were reached since patients showed remarkable improvements in overjet, overbite, crowding, and the sagittal molar relationship. Within the limitations of the present study, EAs could be effectively used for the interceptive orthodontic in growing patients.
PubMed: 33808257
DOI: 10.3390/ma14071695 -
Journal of Pharmacy & Bioallied Sciences Apr 2024Class II malocclusions are a common orthodontic problem, often requiring comprehensive treatment to achieve proper occlusion and facial harmony. Early orthodontic...
BACKGROUND
Class II malocclusions are a common orthodontic problem, often requiring comprehensive treatment to achieve proper occlusion and facial harmony. Early orthodontic intervention in the mixed dentition phase has been advocated to address these issues.
MATERIALS AND METHODS
A retrospective analysis was conducted on a cohort of 150 patients with class II malocclusions who underwent early orthodontic treatment between the ages of 7 and 10 years. The treatment included fixed or removable appliances, headgear, and functional appliances, depending on individual needs. Records of their initial malocclusion severity, treatment modalities, and long-term follow-up data (mean follow-up duration of 10 years) were collected and analyzed. Stability was assessed by evaluating overjet and overbite changes from post-treatment to the long-term follow-up.
RESULTS
The initial mean overjet and overbite values were 8.5 mm and 4.0 mm, respectively. Following early orthodontic intervention, these values were significantly reduced to 3.0 mm and 1.5 mm, respectively ( < 0.001). At the long-term follow-up, the mean overjet and overbite remained stable at 3.2 mm and 1.6 mm, respectively. Analysis revealed that 85% of patients maintained their corrected class II occlusion within clinically acceptable limits, while 15% experienced minor relapse requiring minimal additional treatment.
CONCLUSION
Early orthodontic treatment in class II malocclusions can lead to significant improvements in overjet and overbite, and these corrections tend to remain stable over the long term.
PubMed: 38882812
DOI: 10.4103/jpbs.jpbs_1171_23 -
The Angle Orthodontist Nov 2023To evaluate whether the quality of orthodontic finishing influences long-term stability of anterior tooth alignment.
OBJECTIVES
To evaluate whether the quality of orthodontic finishing influences long-term stability of anterior tooth alignment.
MATERIALS AND METHODS
This retrospective study evaluated 38 patients. Data were obtained at the beginning of treatment (T0), at the end (T1), and at least 5 years after T1 (T2). At this point, the individuals were no longer wearing retainers. Anterior tooth alignment was measured using Little's index (LI). Effect on alignment stability was tested with multiple linear regression using LI-T0, LI-T1, intercanine width difference T1-T0, overbite (T1), overjet (T1), age, gender, time without retention, and presence of third molars as predictor variables. Well-aligned (LI < 1.5 mm) and misaligned (LI > 1.5 mm) cases were compared at T2.
RESULTS
At T2, the alignment stability in the upper arch was inversely associated with the alignment quality (R2 = 0.378, P < .001) and directly associated with overbite (R2 = 0.113, P = .008) at T1. Posttreatment changes caused cases finished with poor alignment to become similar to those finished with excellent alignment (P = .917). In the mandible, posttreatment changes were directly associated only with overjet (R2 = 0.152, P = .015) and well-finished cases displayed better alignment than poorly finished cases (P = .011). Other variables showed no significant association.
CONCLUSIONS
In arches without retention, better quality of orthodontic finishing does not guarantee the stability of anterior alignment. In the maxilla, long-term changes were more significant the greater the overbite and the better the quality of alignment at end of treatment. In the mandible, changes were not dependent on the quality of finishing but were associated with greater overbite at T2.
Topics: Humans; Overbite; Retrospective Studies; Malocclusion, Angle Class II; Mandible; Molar, Third; Orthodontic Retainers
PubMed: 37200475
DOI: 10.2319/101722-722.1 -
International Journal of Paediatric... Nov 2022To evaluate the clinical effectiveness of the eruption guidance appliances (EGAs) in treating malocclusion in the early mixed dentition. (Meta-Analysis)
Meta-Analysis Review
AIM
To evaluate the clinical effectiveness of the eruption guidance appliances (EGAs) in treating malocclusion in the early mixed dentition.
DESIGN
Electronic databases were comprehensively searched for the eligibility literature of the EGA treatment for a period spanning from the earliest available date in each database up to July 2021. Randomized controlled trials, controlled clinical trials, and prospective and retrospective cohort studies were included in the present review. The quality of clinical trials was assessed according to the Cochrane Collaboration's tools (RoB2.0 and ROBINS-I), whereas cohort studies were based on the Newcastle-Ottawa Scale (NOS). The data were gathered and synthesized with the Stata software (version 12).
RESULTS
The screen yielded 436 articles, of which 17 papers were potentially eligible, and 7 articles from 3 studies (1 RCT, 1 CCT, and 1 PCS) were qualified for the final review and analysis. The meta-analysis showed both favorable dentoalveolar and skeletal changes in short term. Both overjet and overbite had a significant decrease after treatment (MD = -2.38 mm, 95% CI: -2.82 to -1.94, p < .001, and MD = -2.43 mm, 95% CI: -3.52 to -1.35, p < .001, respectively), and SNB increased significantly by 0.73 degrees (95% CI: 0.17-1.28, p = .01). After the retention period, however, overbite had a significant increase of 0.88mm, which indicated the occurrence of a relapse (95% CI: 0.60-1.16, p < .001).
CONCLUSIONS
According to the existing evidence, the EGA treatment is effectively correcting overjet and overbite in the early mixed dentition in short term; furthermore, high-quality and long-term studies are warranted to determine its long-term effectiveness.
Topics: Dentition, Mixed; Humans; Malocclusion; Malocclusion, Angle Class II; Overbite; Prospective Studies; Retrospective Studies; Treatment Outcome
PubMed: 35191109
DOI: 10.1111/ipd.12961 -
Plastic and Reconstructive Surgery Oct 2023This study aimed to assess the three-dimensional (3D) quantitative characteristics of the surgical occlusion setup in surgery-first cleft orthognathic surgery, and to...
BACKGROUND
This study aimed to assess the three-dimensional (3D) quantitative characteristics of the surgical occlusion setup in surgery-first cleft orthognathic surgery, and to evaluate its influence on post-surgical skeletal stability.
METHODS
This prospective study was comprised of 35 patients with unilateral cleft lip and palate and class III deformity who consecutively underwent two-jaw surgery with surgery-first approach. Digitized dental models were analyzed to quantify the 3D characteristics of the final surgical occlusion setup. Cone-beam computed tomography was used to measure the 3D surgical skeletal movement and post-surgical skeletal stability. The correlation between skeletal stability and surgical occlusal contact or surgical skeletal movement was also evaluated.
RESULTS
The surgical occlusion setup had a large incisor overjet and positive overbite, and buccal cross bite and open bite on second molars. Occlusal contact on three segments was present in 51.4% of the patients, and the average number for tooth contact was 4.3 teeth. No correlation was found between maxillary or mandibular stability and surgical occlusal contact. However, a significant correlation was found between maxillary and mandibular stability and the surgical skeletal movement.
CONCLUSIONS
The surgical occlusion for correction of cleft-associated class III deformity using the surgery-first approach was characterized with large overjet and positive overbite, and posterior cross bite and open bite. On average, there was occlusal contact on four to five teeth; half of surgical occlusion setups had contact on three segments. The post-surgical skeletal stability was not related to the surgical occlusal contact but to the surgical skeletal movement.
PubMed: 37904274
DOI: 10.1097/PRS.0000000000011173 -
The Angle Orthodontist May 2021(1) To assess the effectiveness of the Orthognathic Quality of Life Questionnaire (OQLQ) and the Child Oral Health Impact Profile (COHIP) to detect differences in Oral...
OBJECTIVES
(1) To assess the effectiveness of the Orthognathic Quality of Life Questionnaire (OQLQ) and the Child Oral Health Impact Profile (COHIP) to detect differences in Oral Health-Related Quality of Life (OHRQoL) between pediatric patients with dentofacial deformities and controls. (2) To assess for correlations between scores from the OQLQ and COHIP domains with the type and severity of the skeletal mal-relationship. (3) To assess if the COHIP and OQLQ were identifying unique or overlapping OHRQoL concerns.
MATERIALS AND METHODS
Subjects were under age 18, presented with a dentofacial deformity, and completed both surveys. Matched controls completed the same. Severity for conditions was recorded via overjet, overbite, and ANB values and subjects were classified as skeletal Class I, II, or III.
RESULTS
Enrollment yielded 30 subjects and 31 controls. For the OQLQ, significant differences between subjects and controls were found for the Facial Esthetics domain, Oral Function domain, and total score. For the COHIP, significant differences were found for the Social/Emotional Well-Being and Self-Image domains plus total score. There were no significant correlations between the severity of the condition as measured by overjet and reported OHRQoL for any domains.
CONCLUSIONS
The OQLQ and COHIP are effective at detecting significant OHRQoL differences between pediatric patients with dentofacial deformities and controls. Although there is some overlap in the results, the instruments appear to identify different OHRQoL concerns.
Topics: Adolescent; Child; Humans; Oral Health; Quality of Life; Self Concept; Surveys and Questionnaires
PubMed: 33449101
DOI: 10.2319/051820-448.1 -
The Journal of Advanced Prosthodontics Dec 2020The present study aimed to investigate the relationships between the crown form of the upper central incisor and their labial inclination, overbite, and overjet.
PURPOSE
The present study aimed to investigate the relationships between the crown form of the upper central incisor and their labial inclination, overbite, and overjet.
MATERIALS AND METHODS
Maxillary and mandibular casts of 169 healthy dentitions were subjected to 3D dental scanning, and analyzed using CAD software. The crown forms were divided into tapered, square, and ovoid based on the mesiodistal dimensions at 20% of the crown height to that at 40%. The degree of labial inclination of the upper central incisor was defined as the angle between the occlusal plane and the line connecting the incisal edge and tooth cervix. The incisal edges of the right upper and lower central incisor that in contact with lines parallel to the occlusal plane were used to determine the overbite and overjet. One-way ANOVA was performed to compare the labial inclination, overbite, and overjet among the crown forms.
RESULTS
The crown forms were classified into three types; crown forms with a 20%/40% dimension ratio of 1.00±0.01 were defined as square, >1.01 as tapered, and <0.99 as ovoid. The labial inclination degree was the greatest in tapered and the least in square. Both overbite and overjet in tapered and ovoid were higher than those in square.
CONCLUSION
Upper central incisor crown forms were related to their labial inclination, overbite, and overjet. It was suggested that the labial inclination, overbite, and overjet should be taken into consideration for the prosthetic treatment or restoring the front teeth crowns.
PubMed: 33489017
DOI: 10.4047/jap.2020.12.6.338