-
European Journal of Paediatric Dentistry Dec 2021The aim of this systematic review was to evaluate the clinical outcome of partial pulpotomy, pulpotomy and pulpectomy for treating primary teeth with normal or infected...
AIM
The aim of this systematic review was to evaluate the clinical outcome of partial pulpotomy, pulpotomy and pulpectomy for treating primary teeth with normal or infected pulp or with irreversible pulpitis.
METHODS
Two reviewers on Pubmed and ISI Web of Science performed a comprehensive literature review of publications from 1966 until July 2019. Pico outline was used to facilitate literature research. Among abstracts, publications were selected according to the following criteria: prospective clinical study, correct indication for the performed treatment, clear definition of clinical and/or radiographic success criteria and at least 6-month follow-up period. The strict selection criteria under the keywords "pulpotomy", "partial pulpotomy" and "pulpectomy" resulted in a limited amount of randomised controlled trials (RCT) or controlled clinical trials (CT). Qualitative assessment of the selected clinical studies and level of evidence was included according to the criteria described by the Oxford Centre for Evidence-Based Medicine (CEBM).
CONCLUSION
Prerequisites for a successful pulpotomy are symptom-free teeth, sterile removal of coronal pulp and haemostasis. Both MTA and formocresol perform well for partial pulpotomies after caries exposure. Formocresol had been the most popular amputation material for pulpotomies. Due to the potential side effects, other medicaments, such as ferric sulfate, mineral trioxide aggregate (MTA) or NaOCl are suggested. Grey and white MTA yeld the same results. Lasers are not recommended due to their large diversity. Regarding pulpectomy, the conditions, procedures, and evaluation for the treatment were not well defined in the studies. Nevertheless, there is evidence to use calcium hydroxide, zinc oxide eugenol paste or iodoform based pastes as root filling materials for non-vital molars. Pulpectomies showed better success rates than pulpotomies. Stainless steel crowns are recommended as definite restorations after both endodontic treatments. Longer follow-up periods, further clinical studies with comparable conditions and clear definition of evaluation criteria are needed to further confirm the results of endodontic treatment in primary teeth.
Topics: Calcium Compounds; Drug Combinations; Humans; Molar; Oxides; Pulpectomy; Pulpotomy; Silicates; Tooth, Deciduous; Treatment Outcome; Zinc Oxide-Eugenol Cement
PubMed: 35034465
DOI: 10.23804/ejpd.2021.22.04.4 -
Materials (Basel, Switzerland) May 2021This systematic review aims to evaluate the different pretreatments of the zirconia surface and resin cement in order to determine a valid operative protocol for... (Review)
Review
This systematic review aims to evaluate the different pretreatments of the zirconia surface and resin cement in order to determine a valid operative protocol for adhesive cementation. Methodologies conducted for this study followed the Prisma (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) guidelines. An electronic search was performed in four databases. The established focus question was: "What type of surface conditioning method is the one that obtains the best adhesion values to zirconia over time by applying a resin cement?" Forty-five relevant papers were found to qualify for final inclusion. In total, 260 different surface pretreatment methods, mainly combinations of air-abrasion protocols and adhesive promoters, were investigated. Altogether, the use of two artificial aging methods, three types of cement and four testing methods was reported. The results showed that mechanicochemical surface pretreatments offered the best adhesive results. Self-adhesive cement and those containing 10-MDP obtained the best results in adhesion to zirconia. Artificial aging reduced adhesion, so storage in water for 30 days or thermocycling for 5000 cycles is recommended. A standardized adhesive protocol has not been established due to a lack of evidence.
PubMed: 34067501
DOI: 10.3390/ma14112751 -
Dentistry Journal Aug 2019Reliable bonding between resin composite cements and high strength ceramics is difficult to achieve because of their chemical inertness and lack of silica content that... (Review)
Review
Reliable bonding between resin composite cements and high strength ceramics is difficult to achieve because of their chemical inertness and lack of silica content that makes etching impossible. The purpose of this review is to classify and analyze the existing methods and materials suggested to improve the adhesion of zirconia to dental substrate by using composite resins, in order to explore current trends in surface conditioning methods with predictable results. The current literature, examining the bond strength of zirconia ceramics, and including in vitro studies, clinical studies, and a systematic review, was analyzed. The research in the literature was carried out using PubMed and Cochrane Library databases, only papers in English, published online from 2013 to 2018. The following keywords and their combinations were used: Zirconia, 3Y-TZP, Adhesion, Adhesive cementation, Bonding, Resin, Composite resin, Composite material, Dentin, Enamel. Research, in PubMed and Cochrane Library databases, provided 390 titles with abstracts. From these, a total of 93 publications were chosen for analysis. After a full text evaluation, seven articles were discarded. Therefore, the final sample was 86, including in vitro, clinical studies, and one systematic review. Various adhesive techniques with different testing methods were examined. Airborne-particle abrasion and tribo-chemical silica coating are the pre-treatment methods with more evidence in the literature. Increased adhesion could be expected after physico-chemical conditioning of zirconia. Surface contamination has a negative effect on adhesion. There is no evidence to support a universal adhesion protocol.
PubMed: 31374820
DOI: 10.3390/dj7030074 -
Clinical Oral Implants Research Jan 2022To analyze the clinical outcomes of all-ceramic single crowns (SCs) and fixed dental prostheses (FDPs) supported by ceramic implants. (Meta-Analysis)
Meta-Analysis Review
OBJECTIVE
To analyze the clinical outcomes of all-ceramic single crowns (SCs) and fixed dental prostheses (FDPs) supported by ceramic implants.
MATERIALS AND METHODS
Based on a focused question and customized PICO framework, electronic (Medline/EMBASE/Cochrane) and manual searches for studies reporting the clinical outcomes of all-ceramic SCs and FDPs supported by ceramic implants ≥12 months were performed. The primary outcomes were reconstruction survival and the chipping proportion. The secondary outcomes were implant survival, technical complications, and patient-related outcome measurements. Meta-analyses were performed after 1, 2, and 5 years using random-effect meta-analyses.
RESULTS
Eight of the 1,403 initially screened titles and 55 full texts were included. Five reported on monolithic lithium disilicate (LS2) SCs, one on veneered zirconia SCs, and two on veneered zirconia SCs and FDPs, which reported all on cement-retained reconstructions (mean observation: 12.0-61.0 months). Meta-analyses estimated a 5-year survival rate of 94% (95% confidence interval [CI]: 82%-100%) for overall implant survival. Reconstruction survival proportions after 5 years were: monolithic LS2, 100% (95%CI: 95%-100%); veneered zirconia SCs, 89% (95%CI: 62%-100%); and veneered zirconia FDPs 94% (95%CI: 81%-100%). The chipping proportion after 5 years was: monolithic LS2, 2% (95%CI: 0%-11%); veneered zirconia SCs, 38% (95%CI: 24%-54%); and veneered zirconia FDPs, 57% (95%CI: 38%-76%). Further outcomes were summarized descriptively.
CONCLUSIONS
Due to the limited data available, only tendencies could be identified. All-ceramic reconstructions supported by ceramic implants demonstrated promising survival rates after mid-term observation. However, high chipping proportions of veneered zirconia SCs and, particularly, FDPs diminished the overall outcome. Monolithic LS2 demonstrated fewer clinical complications. Monolithic reconstructions could be a valid treatment option for ceramic implants.
Topics: Ceramics; Crowns; Dental Implants; Dental Porcelain; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Dental Restoration Failure; Humans; Metal Ceramic Alloys; Zirconium
PubMed: 34665900
DOI: 10.1111/clr.13871 -
Caries Research 2020For an Organisation for Caries Research/European Federation of Conservative Dentistry consensus, this systematic review is aimed to assess the question of how to manage...
For an Organisation for Caries Research/European Federation of Conservative Dentistry consensus, this systematic review is aimed to assess the question of how to manage the caries process in the case of early childhood caries (ECC). Medline via PubMed was searched systematically regarding management of ECC. First priority was existing systematic reviews or randomized clinical trials otherwise cohort studies dealing with management of ECC, primarily with carious anterior teeth. After data extraction, the potential risk of bias was estimated depending on the study types, and the level of evidence was evaluated. Regarding management of ECC, results are presented for silver diamine fluoride (SDF, n = 5), nonoperative caries management (NOCM, n = 10), and restorative approaches (RA, n = 8) separately, as different kinds of studies with different levels of evidence were found for the different aspects in the management of ECC. The 5 systematic reviews on SDF showed a high potential for arrest of ECC on a high level of evidence. In NOCM, a low level of evidence for a moderate effect of fluoride varnish in arresting or remineralizing, especially non-cavitated lesions, was assessed. For RA in carious anterior upper primary teeth, a low level of evidence was found for higher failure rates of glass ionomer cement and composite fillings than composite strip crowns even if placed under general anaesthesia and especially compared to other crowns (stainless steel and zirconia). In conclusions, ECC may be managed successfully with nonoperative (SDF, regular fluoride application) and moderately well with operative approaches, but the decision is affected by many other variables such as pulpal involvement, the child's cooperation, or a general anaesthesia setting.
Topics: Child; Child, Preschool; Crowns; Dental Caries; Fluorides; Fluorides, Topical; Glass Ionomer Cements; Humans; Research Design
PubMed: 31910415
DOI: 10.1159/000504335 -
European Archives of Paediatric... Feb 2022To systematically review the treatment modalities for molar-incisor hypomineralisation for children under the age of 18 years. The research question was, 'What are the...
PURPOSE
To systematically review the treatment modalities for molar-incisor hypomineralisation for children under the age of 18 years. The research question was, 'What are the treatment options for teeth in children affected by molar incisor hypomineralisation?'
METHODS
An electronic search of the following electronic databases was completed MEDLINE, EMBASE, Cochrane Central Register of Controlled Trials, LILACS, Google Scholar and Open Grey identifying studies from 1980 to 2020. The PRISMA guidelines were followed. The studies were screened, data extracted and calibration was completed by two independent reviewers.
RESULTS
Of 6220 potential articles, 34 studies were included. Twenty studies investigated management of molars with fissure sealants, glass ionomer cement, polyacid modified resin composite, composite resin, amalgam, preformed metal crowns, laboratory-manufactured crowns and extractions. In four articles management of incisors with microabrasion, resin-infiltration and a combination of approaches was reported. Eight studies looked at strategies to mineralise MIH-affected teeth and/or reduce hypersensitivity. Two studies investigated patient-centred outcomes following treatment. Due to the heterogeneity between the studies, meta-analysis was not performed.
CONCLUSION
The use of resin-based fissure sealants, preformed metal crowns, direct composite resin restorations and laboratory-made restorations can be recommended for MIH-affected molars. There is insufficient evidence to support specific approaches for the management of affected incisors. Products containing CPP-ACP may be beneficial for MIH-affected teeth.
Topics: Adolescent; Child; Composite Resins; Dental Enamel Hypoplasia; Humans; Incisor; Molar; Pit and Fissure Sealants
PubMed: 34110615
DOI: 10.1007/s40368-021-00635-0 -
Heliyon May 2020Restoring noncarious cervical lesions are challenging to clinical practice. This study aimed to compare the clinical performance/longevity of glass ionomer cements (GIC)...
OBJECTIVE
Restoring noncarious cervical lesions are challenging to clinical practice. This study aimed to compare the clinical performance/longevity of glass ionomer cements (GIC) and composite resins (CR) used for noncarious cervical lesions (NCCL) through a systematic review and meta-analysis (MA).
DATA
Randomized and controlled clinical trials and nonrandomized clinical trials, which compared the clinical performance/longevity of CR and GIC (conventional and/or resin-modified) in the treatment of NCCL, were included.
SOURCE
The methodological quality and risk of bias were evaluated using the Cochrane Collaboration tool. Seven MAs were performed considering (1) the clinical performance of the parameters in common: retention, marginal discoloration, marginal adaptation, secondary caries, color, anatomic form, surface texture and (2) a follow-up time of 12, 24 and 36 months. The prevalence of successful restorations and the total number of restorations per clinical parameter/follow-up time were used to calculate the relative risk (95% CI).
STUDY SELECTION
After screening of the studies, 13 studies were used for quantitative synthesis. The risk difference (CI 95%, α, I) between GIC and CR for anatomic form was 0.00 (-0.02, 0.02; p = 0.83; 0%); for color was -0.02 (-0.08, 0.04; p = 0.48; 80%); for surface texture was -0.02 (-0.06, 0.02; p = 0.31; 63%); for secondary caries was -0.00 (-0.01, 0.01; p = 0.87; 0%); for marginal discoloration was 0.01 (-0.01, 0.03; p = 0.23; 3%); for marginal adaptation was 0.01 (-0.01, 0.04; p = 0.34; 32%) and for retention was 0.07 (0.02, 0.12; p = 0.003; 76%).
CONCLUSION
GIC showed a clinical performance significantly higher than CR in regard to retention, whereas for the other parameters, GIC was similar to CR.
CLINICAL SIGNIFICANCE
NCCLs is increasingly prevalent among the population and this type of lesion causing defects in the tooth that affect not only aesthetics but also everyday habits, such as drinking, eating and teeth brushing, due to the sensitivity these lesions cause.
PubMed: 32462087
DOI: 10.1016/j.heliyon.2020.e03969 -
Biomimetics (Basel, Switzerland) Aug 2023Additive manufacturing (three-dimensional (3D) printing) has become a leading manufacturing technique in dentistry due to its various advantages. However, its potential... (Review)
Review
BACKGROUND
Additive manufacturing (three-dimensional (3D) printing) has become a leading manufacturing technique in dentistry due to its various advantages. However, its potential applications for dental ceramics are still being explored. Zirconia, among ceramics, has increasing popularity and applications in dentistry mostly due to its excellent properties. Although subtractive manufacturing (3D milling) is considered the most advanced technology for the fabrication of zirconia restorations, certain disadvantages are associated with it.
METHODS
A systematic review was piloted to compare the clinical performance of zirconium crowns that were fabricated using three-dimensional (3D) milling and 3D printing. A meta-analysis was performed, and studies published up to November 2022 were identified. The terms searched were "Zirconium crowns", "3D printing", "CAD/CAM" (Computer-Aided Design and Computer-Aided Manufacturing), "Milling", "dental crowns", and "3D milling". The characteristics that were compared were the year in which the study was published, study design, age of the patient, country, the number of crowns, the type of crown fabrication, marginal integrity, caries status, and outcomes. Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were used to structure this systematic review. Out of eleven hundred and fifty titles identified after a primary search, nine articles were included in the quantitative analysis. The research question based on PICO/PECO (Participant, Intervention/exposure, Comparison, and Outcome) was "Do 3D-printed and milled (P) zirconia crowns and FDPs (I) have a better survival rate (O) when conventional prosthesis is also an option (C)"? The data collected were tabulated and compared, and the risk of bias and meta-analysis were later performed. Only nine articles (clinical research) were selected for the study. Since there were no clinical studies on the 3D printing of zirconium crowns, six in vitro studies were considered for the comparison. Zirconium crowns in the milling group had an average minimum follow-up of 6 months.
RESULTS
A moderate risk of bias was found, and survival was significant. A high heterogeneity level was noted among the studies. Marginal integrity, periodontal status, and survival rate were high. Linear regression depicted no statistical correlation between the type of cement used and the survival rate.
CONCLUSIONS
It can be concluded that the milled crowns had a higher performance and satisfactory clinical survival.
PubMed: 37754145
DOI: 10.3390/biomimetics8050394 -
Acta Stomatologica Croatica Mar 2021Ion-incorporated zeolite is a widely used antimicrobial material studied for various dental applications. At present, there is no other systematic review that evaluates... (Review)
Review
OBJECTIVE
Ion-incorporated zeolite is a widely used antimicrobial material studied for various dental applications. At present, there is no other systematic review that evaluates the effectiveness of zeolite in all dental materials. The purpose of this study was to review all available literature that analyzed the antimicrobial effects and/or mechanical properties of zeolite as a restorative material in dentistry.
MATERIAL AND METHODS
Following PRISMA guidelines, an exhaustive search of PubMed, Ovid Medline, Scopus, Embase, and the Dentistry & Oral Sciences Source was conducted. No language or time restrictions were used and the study was conducted from June 1, 2020 to August 17, 2020. Only full text articles were selected that pertained to the usage of zeolite in dental materials including composite resin, bonding agents, cements, restorative root material, cavity base material, prosthesis, implants, and endodontics.
RESULTS
At the beginning of the study, 1534 studies were identified, of which 687 duplicate records were excluded. After screening for the title, abstract, and full texts, 35 articles remained and were included in the qualitative synthesis. An Inter-Rater Reliability (IRR) test, which included a percent user agreement and reliability percent, was conducted for each of the 35 articles chosen.
CONCLUSION
Although ion-incorporated zeolite may enhance the antimicrobial properties of dental materials, the mechanical properties of some materials, such as MTA and acrylic resin, may be compromised. Therefore, since the decrease in mechanical properties depends on zeolite concentration in the restorative material, it is generally recommended to add 0.2-2% zeolite by weight.
PubMed: 33867540
DOI: 10.15644/asc55/1/9 -
Clinical, Cosmetic and Investigational... 2020Dental implant is an effective and standardized treatment procedure in the healthcare setting. This study presents a comparison of dental implant reconstruction using... (Review)
Review
PURPOSE
Dental implant is an effective and standardized treatment procedure in the healthcare setting. This study presents a comparison of dental implant reconstruction using screw and cement. It explicitly reviews the studies concerning cement and screws dental implants to determine the efficiency of the two.
PATIENTS AND METHODS
A systematic review was conducted by comprehensively searching electronic literature. The keywords, such as "Screw versus Cement Retained Fixed Implant Supported Reconstructions," "Screw Retained Fixed Implant." "Cement Implant" and "Dental Implant" were used for article searching. Twelve studies were included based on the determined inclusion and exclusion criteria.
RESULTS
No significant difference was found between the screw-retained and cemented retained implant supported reconstructions. Dental implants are associated with complications leading to implant failure based on the type of restoration that is being used; cement-retained restoration and screw-retained restoration. The treatment selection must be based on the significance criteria and the tooth condition.
CONCLUSION
Screw-retained implant-supported reconstructions were found to pose less biological and technological complications. Retention of the tooth is more stable and functional when implantation is selected based on the efficiency of a treatment procedure.
PubMed: 32021476
DOI: 10.2147/CCIDE.S231070