-
Journal of Conservative Dentistry and... Feb 2024The aim of this study was to systematically compare the bond strength of self-adhesive and self-etch or total-etch resin cement to zirconia. The PubMed, ISI (all), and... (Review)
Review
The aim of this study was to systematically compare the bond strength of self-adhesive and self-etch or total-etch resin cement to zirconia. The PubMed, ISI (all), and Scopus databases were searched for the selected keywords up to November 1, 2021, without date or language restrictions. In vitro studies comparing the bond strength of self-adhesive and self-etch or total-etch resin cement to zirconia were eligible for inclusion in the study. The selected articles were divided into four groups based on the type of resin cement and the storage time. Statistical analysis was performed using the Biostat Comprehensive Meta-Analysis Software version 2 ( = 0.05). The effect of conventional cement ( Glass Ionomer (GI), Resin Modified Glass Ionomer (RMGI) and zinc phosphate) was analyzed using descriptive analysis. The initial search yielded 376 articles, of which 26 were selected after a methodological assessment. Two reviewers independently extracted data and assessed the risk of bias. The results showed that the immediate or delay bond strength of the self-adhesive resin cement to zirconia has no significant difference with the bond strength of self-etch resin cement to zirconia. The immediate and delay bond strength of total-etch cement-zirconia was significantly lower than that of self-adhesive cement-zirconia ( = 0.00). A descriptive analysis of the selected articles showed that the bond strength of self-adhesive resin cement to zirconia was significantly higher than total-etch cement. The results of the meta-analysis showed that both self-adhesive and self-etch resin cement (if applied according to their manufacturer's instruction) are suitable for bonding to zirconia.
PubMed: 38463466
DOI: 10.4103/JCDE.JCDE_225_23 -
Clinical Oral Investigations Jan 2023For a conventional indirect restoration, temporary cementation inevitably contaminated collapsed dentin collagen. The purpose of this review was to evaluate the optimal... (Meta-Analysis)
Meta-Analysis Review
OBJECTIVES
For a conventional indirect restoration, temporary cementation inevitably contaminated collapsed dentin collagen. The purpose of this review was to evaluate the optimal strategy for minimizing its negative effects.
MATERIAL AND METHODS
Databases such as PubMed, Web of Science, EMBASE, and the Cochrane Library were searched for in vitro studies, involving the influence of immediate dentin sealing (IDS), different temporary cements, and their removal strategies on dentin bond strength. The meta-analysis used the inverse variance method with effect method of the standardized mean difference and statistical significance at p ≤ 0.05. The I value and the Q-test were used to assess the heterogeneity.
RESULTS
A total of 14 in vitro trials were subjected to the meta-analysis. Within the study's limitations, we assumed that IDS eliminated the negative effects of temporary bonding, achieving the comparable immediate bond strength with the control (p = 0.46). In contrast, under delayed dentin sealing (DDS), temporary cementation statistically decreased bond strength (p = 0.002). Compared with resin-based and non-eugenol zinc oxide cements, polycarboxylate and calcium hydroxide cements performed better on bond strength with no statistical difference from the control group (p > 0.05). Among the removal methods of temporary cements, the AlO abrasion restored the decreased bond strength (p = 0.07) and performed better than hand instruments alone (p = 0.04), while pumice removal slightly reduced the bond strength in contrast with the control group (p = 0.05, 95% CI = - 1.62 to 0).
CONCLUSIONS
The choices of IDS, polycarboxylate and calcium hydroxide temporary cements, AlO abrasion removal method were feasible and efficient to enhance the bond strength.
CLINICAL RELEVANCE
It is worthwhile applying IDS technique, polycarboxylate and calcium hydroxide temporary cements during indirect restoration. The AlO abrasion of cleaning dentin can minimize the negative effects of temporary cement.
Topics: Resin Cements; Dental Bonding; Dentin-Bonding Agents; Calcium Hydroxide; Dental Cements; Materials Testing; Dentin; Tensile Strength; Dental Stress Analysis
PubMed: 36422719
DOI: 10.1007/s00784-022-04790-6 -
Biomaterial Investigations in Dentistry 2020To compare the fit and assess the accuracy of tooth-supported single and multi-unit FDPs in cobalt chromium fabricated using different manufacturing techniques. A... (Review)
Review
To compare the fit and assess the accuracy of tooth-supported single and multi-unit FDPs in cobalt chromium fabricated using different manufacturing techniques. A systematic search was performed in three databases; PubMed, Scopus, and Web of Science, using clearly specified search terms and inclusion criteria. The search yielded 1071 articles and included 18 articles in the analysis. Data regarding the fit analyses and the methods of manufacturing were extracted and the accuracy was defined as the fit result minus the pre-set cement spacer. Internal gap (IntG) was the mean of all the internal measuring points and total gap (TotG) was the mean of all measuring points (marginal, cervical, chamfer, axial, occlusal). The total gap results for fit and accuracy irrespective of manufacturing technique were 96 μm and 54 μm for single crowns, 107 μm and 54 μm for multi-unit FDPs, and 98 μm and 54 μm for both single crowns and multi-unit FDPs combined. For total gap of single crowns soft milling had the highest accuracy, for multi-unit FDPs additive manufactured restorations had the highest accuracy. With the results grouped by impression technique, the accuracy for total gap was highest for digital impressions and lower for conventional impressions. Due to the inherent limitations of this systematic review, it still remains unclear what effect the manufacturing technique has on the fit of FDPs. However, the descriptive results suggest that the marginal fit of cobalt chromium FDPs is not negatively affected by the manufacturing technique.
PubMed: 32083253
DOI: 10.1080/26415275.2020.1714445 -
Stomatologija 2020A significant loss of dental structures during endodontic treatment increases the probability of tooth cracks, fractures or even tooth loss. The objective of this...
INTRODUCTION
A significant loss of dental structures during endodontic treatment increases the probability of tooth cracks, fractures or even tooth loss. The objective of this systematic review was to assess the influence of temporary filling material on dental cracks and fractures during endodontic treatment.
MATERIALS AND METHODS
The literature was digitally searched for in vivo and in vitro studies using Pubmed, ScienceDirect and Wiley Online Library databases. A total of 38 potentially relevant records were identified in the literature search after duplicates were removed. After screening, full-text analysis of selected studies was done. Two reviewers independently selected the studies, extracted the data which was structured and summarized.
RESULTS
Five publications met the selection criteria. Ten temporary filling materials were evaluated in this review. The analysis demonstrated that non-eugenol chemically hardening temporary filling materials significantly increase filling and dental fractures and have the lowest fracture and tooth fracture resistance. Glass ionomer cements (GIC) presented the higher hermetic, tightness and fracture resistance features.
CONCLUSIONS
A temporary filling material during endodontic treatment may influence dental cracks and fractures. Highest impact for dental cracks and fractures has ready-to-use, eugenol-free temporary filling materials, whereas the least impact has GIC.
Topics: Glass Ionomer Cements; Humans; Root Canal Filling Materials; Tooth Fractures
PubMed: 33821811
DOI: No ID Found -
Clinical and Experimental Dental... Apr 2022The push-out bond strength (POBS) of calcium silicate-based cements (CSCs) to the dentinal wall is considered one of the essential physical properties for clinical... (Meta-Analysis)
Meta-Analysis Review
OBJECTIVES
The push-out bond strength (POBS) of calcium silicate-based cements (CSCs) to the dentinal wall is considered one of the essential physical properties for clinical success. The presence of blood in the treatment area affects the POBS of these types of cement. This study aimed to evaluate the impact of blood contamination on the bond strength of CSCs and dentinal walls.
MATERIAL AND METHODS
This systematic review was performed by searching electronic databases (MEDLINE-PubMed, Scopus, and EMBASE) to include relevant in vitro studies published between 1992 and April 2020. Two reviewers independently evaluated the selected studies and extracted data on the type of studied CSCs, evaluated area of the teeth, sample size, the dimension of a prepared area, slice thickness, storage duration, the setting of the universal testing machine (UTM), effects of blood contamination on POBS of CSCs and their failure modes. The bond strength of evaluated CSCs in studies was used for network meta-analysis.
RESULTS
Initial searches identified 292 articles, while only 13 articles met the inclusion criteria. Full texts of these articles were evaluated, and data extraction was performed. The effect of blood contamination on bond strength to the dentinal wall was assessed in various CSCs such as PMTA, Biodentine, and AMTA. The network meta-analysis results showed that the bond strength of Biodentine was significantly higher than other types of cement in blood presence (p < .05).
CONCLUSIONS
Based on the current systematic review, despite controversies among the result of the different articles and the lack of data for some CSCs like bioaggregate, it could be concluded that the bond strength of Biodentine to the dentinal wall is better than other evaluated CSCs in the presence of blood.
Topics: Calcium Compounds; Dental Bonding; Dental Cements; Silicates
PubMed: 35220692
DOI: 10.1002/cre2.546 -
Journal of Conservative Dentistry : JCD 2021This systematic review aimed to determine the presence of any proof to validate the utilization of surface treatments to advance the bond strength of fiber posts to... (Review)
Review
Effect of surface treatment on the dislocation resistance of prefabricated esthetic fiber posts bonded with self-adhesive resin cement: A systematic review and meta-analysis.
BACKGROUND
This systematic review aimed to determine the presence of any proof to validate the utilization of surface treatments to advance the bond strength of fiber posts to intraradicular dentin with self-adhesive resin cements.
METHODOLOGY
Laboratory studies that assessed the push-out or pull-out bond strength of the prefabricated esthetic posts whose surface was treated with either chemical or physical treatment or a combination and bonded using self-adhesive resin cement within root canal model were included for this systematic review. The review began after obtaining the registration number from the International Prospective Register of Systematic Reviews (PROSPERO ID-CRD42020165009). Study reporting was performed following the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. Relevant articles were identified using a literature database search in Web of Science, Scopus, PubMed, and EBSCO. Besides this, handsearch was also done to ensure complete capture of the articles.
RESULTS
Fifteen articles were then selected and included in this study, out of which four were excluded for meta-analysis due to usage of the artificial substrate. It was shown that an additional step of surface treatment of esthetic fiber post did not result in significant improvement in dislocation resistance. Assessment of risk of bias categorized the available research into high risk and medium risk. The results showed heterogeneity.
CONCLUSION
The use of additional steps such as chemical, mechanical, or a combination of post surface treatment does not have any added benefit. However, the results must be interpreted with caution due to methodological shortcomings.
PubMed: 34759575
DOI: 10.4103/jcd.jcd_656_20 -
The Japanese Dental Science Review Nov 2022This systematic review provides an update on the development and efficacy of direct restorative dental materials for root caries interventions from in vitro and clinical... (Review)
Review
This systematic review provides an update on the development and efficacy of direct restorative dental materials for root caries interventions from in vitro and clinical studies. PubMed, Embase, and Web of Science were searched using specific MeSH keywords. Full articles from September 1990 to October 2021 were collected. Additional articles were identified by reference retrieval and manual searching. Studies not related to restorative materials for root caries treatment, case reports, non-original articles, and/or articles not written in English were excluded. Bias risk assessment was performed for the clinical studies. Forty-two articles (eleven clinical studies and thirty-one in vitro studies) were included for analysis. Most in vitro studies indicated an excellent cariostatic effect of glass ionomer cement. Resin-modified glass ionomer restorations also presented reduced recurrent caries activity but had a lower efficacy than glass ionomer cement restorations. For composite resin restorations, the main material development strategies are to strengthen the tooth structure and integrate antimicrobial activity. The clinical studies offered limited data, so the most appropriate material for surface root caries treatment is still inconclusive. However, atraumatic restorative treatment (ART) is an alternative treatment for patients with limiting conditions. Further clinical studies are required to confirm the efficacy of bioactive materials.
PubMed: 35024074
DOI: 10.1016/j.jdsr.2021.11.004 -
The Cochrane Database of Systematic... Nov 2019Early dental decay or demineralised lesions (DLs, also known as white spot lesions) can appear on teeth during fixed orthodontic (brace) treatment. Fluoride reduces... (Meta-Analysis)
Meta-Analysis
BACKGROUND
Early dental decay or demineralised lesions (DLs, also known as white spot lesions) can appear on teeth during fixed orthodontic (brace) treatment. Fluoride reduces decay in susceptible individuals, including orthodontic patients. This review compared various forms of topical fluoride to prevent the development of DLs during orthodontic treatment. This is the second update of the Cochrane Review first published in 2004 and previously updated in 2013.
OBJECTIVES
The primary objective was to evaluate whether topical fluoride reduces the proportion of orthodontic patients with new DLs after fixed appliances. The secondary objectives were to examine the effectiveness of different modes of topical fluoride delivery in reducing the proportions of orthodontic patients with new DLs, as well as the severity of lesions, in terms of number, size and colour. Participant-assessed outcomes, such as perception of DLs, and oral health-related quality of life data were to be included, as would reports of adverse effects.
SEARCH METHODS
Cochrane Oral Health's Information Specialist searched the following databases: Cochrane Oral Health's Trials Register (to 1 February 2019), the Cochrane Central Register of Controlled Trials (CENTRAL; 2019, Issue 1) in the Cochrane Library (searched 1 February 2019), MEDLINE Ovid (1946 to 1 February 2019), and Embase Ovid (1980 to 1 February 2019). The US National Institutes of Health Ongoing Trials Register (ClinicalTrials.gov) and the World Health Organization International Clinical Trials Registry Platform were searched for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases.
SELECTION CRITERIA
Parallel-group, randomised controlled trials comparing the use of a fluoride-containing product versus a placebo, no treatment or a different type of fluoride treatment, in which the outcome of enamel demineralisation was assessed at the start and at the end of orthodontic treatment.
DATA COLLECTION AND ANALYSIS
At least two review authors independently, in duplicate, conducted risk of bias assessments and extracted data. Authors of trials were contacted to obtain missing data or to ask for clarification of aspects of trial methodology. Cochrane's statistical guidelines were followed.
MAIN RESULTS
This update includes 10 studies and contains data from nine studies, comparing eight interventions, involving 1798 randomised participants (1580 analysed). One report contained insufficient information and the authors have been contacted. We assessed two studies as at low risk of bias, six at unclear risk of bias, and two at high risk of bias. Two placebo (non-fluoride) controlled studies, at low risk of bias, investigated the professional application of varnish (7700 or 10,000 parts per million (ppm) fluoride (F)), every six weeks and found insufficient evidence of a difference regarding its effectiveness in preventing new DLs (risk ratio (RR) 0.52, 95% confidence interval (CI) 0.14 to 1.93; 405 participants; low-certainty evidence). One placebo (non-fluoride) controlled study, at unclear risk of bias, provides a low level of certainty that fluoride foam (12,300 ppm F), professionally applied every two months, may reduce the incidence of new DLs (12% versus 49%) after fixed orthodontic treatment (RR 0.26, 95% CI 0.11 to 0.57; 95 participants). One study, at unclear risk of bias, also provides a low level of certainty that use of a high-concentration fluoride toothpaste (5000 ppm F) by patients may reduce the incidence of new DLs (18% versus 27%) compared with a conventional fluoride toothpaste (1450 ppm F) (RR 0.68, 95% CI 0.46 to 1.00; 380 participants). There was no evidence for a difference in the proportions of orthodontic patients with new DLs on the teeth after treatment with fixed orthodontic appliances for the following comparisons: - an amine fluoride and stannous fluoride toothpaste/mouthrinse combination versus a sodium fluoride toothpaste/mouthrinse, - an amine fluoride gel versus a non-fluoride placebo applied by participants at home once a week and by professional application every three months, - resin-modified glass ionomer cement versus light-cured composite resin for bonding orthodontic brackets, - a 250 ppm F mouthrinse versus 0 ppm F placebo mouthrinse, - the use of an intraoral fluoride-releasing glass bead device attached to the brace versus a daily fluoride mouthrinse. The last two comparisons involved studies that were assessed at high risk of bias, because a substantial number of participants were lost to follow-up. Unfortunately, although the internal validity and hence the quality of the studies has improved since the first version of the review, they have compared different interventions; therefore, the findings are only considered to provide low level of certainty, because none has been replicated by follow-up studies, in different settings, to confirm external validity. A patient-reported outcome, such as concern about the aesthetics of any DLs, was still not included as an outcome in any study. Reports of adverse effects from topical fluoride applications were rare and unlikely to be significant. One study involving fluoride-containing glass beads reported numerous breakages.
AUTHORS' CONCLUSIONS
This review found a low level of certainty that 12,300 ppm F foam applied by a professional every 6 to 8 weeks throughout fixed orthodontic treatment, might be effective in reducing the proportion of orthodontic patients with new DLs. In addition, there is a low level of certainty that the patient use of a high fluoride toothpaste (5000 ppm F) throughout orthodontic treatment, might be more effective than a conventional fluoride toothpaste. These two comparisons were based on single studies. There was insufficient evidence of a difference regarding the professional application of fluoride varnish (7700 or 10,000 ppm F). Further adequately powered, randomised controlled trials are required to increase the certainty of these findings and to determine the best means of preventing DLs in patients undergoing fixed orthodontic treatment. The most accurate means of assessing adherence with the use of fluoride products by patients and any possible adverse effects also need to be considered. Future studies should follow up participants beyond the end of orthodontic treatment to determine the effect of DLs on patient satisfaction with treatment.
Topics: Cariostatic Agents; Dental Caries; Fluorides; Humans; Mouthwashes; Orthodontic Brackets; Randomized Controlled Trials as Topic
PubMed: 31742669
DOI: 10.1002/14651858.CD003809.pub4 -
The Cochrane Database of Systematic... Oct 2021Root canal therapy is a sequence of treatments involving root canal cleaning, shaping, decontamination, and obturation. It is conventionally performed through a hole... (Review)
Review
BACKGROUND
Root canal therapy is a sequence of treatments involving root canal cleaning, shaping, decontamination, and obturation. It is conventionally performed through a hole drilled into the crown of the affected tooth, namely orthograde root canal therapy. When it fails, retrograde filling, which seals the root canal from the root apex, is a good alternative. Many materials are used for retrograde filling. Since none meets all the criteria an ideal material should possess, selecting the most efficacious material is of utmost importance. This is an update of a Cochrane Review first published in 2016.
OBJECTIVES
To determine the effects of different materials used for retrograde filling in children and adults for whom retrograde filling is necessary in order to save the tooth.
SEARCH METHODS
An Information Specialist searched five bibliographic databases up to 21 April 2021 and used additional search methods to identify published, unpublished, and ongoing studies. We also searched four databases in the Chinese language.
SELECTION CRITERIA
We selected randomised controlled trials (RCTs) that compared different retrograde filling materials, with the reported success rate that was assessed by clinical or radiological methods for which the follow-up period was at least 12 months.
DATA COLLECTION AND ANALYSIS
Records were screened in duplicate by independent screeners. Two review authors extracted data independently and in duplicate. Original trial authors were contacted for any missing information. Two review authors independently assessed the risk of bias of the included studies. We followed Cochrane's statistical guidelines and assessed the certainty of the evidence using GRADE.
MAIN RESULTS
We included eight studies, all at high risk of bias, involving 1399 participants with 1471 teeth, published between 1995 and 2019, and six comparisons of retrograde filling materials. - Mineral trioxide aggregate (MTA) versus intermediate restorative material (IRM): there may be little to no effect of MTA compared to IRM on success rate at one year, but the evidence is very uncertain (risk ratio (RR) 1.09, 95% confidence interval (CI) 0.97 to 1.22; I = 0%; 2 studies; 222 teeth; very low-certainty evidence). - MTA versus super ethoxybenzoic acid (Super-EBA): there may be little to no effect of MTA compared to Super-EBA on success rate at one year, but the evidence is very uncertain (RR 1.03, 95% CI 0.96 to 1.10; 1 study; 192 teeth; very low-certainty evidence). - Super-EBA versus IRM: the evidence is very uncertain about the effect of Super-EBA compared with IRM on success rate at 1 year, with results indicating Super-EBA may reduce or have no effect on success rate (RR 0.90, 95% CI 0.80 to 1.01; 1 study; 194 teeth; very low-certainty evidence). - Dentine-bonded resin composite versus glass ionomer cement: compared to glass ionomer cement, dentine-bonded resin composite may increase the success rate of the treatment at 1 year, but the evidence is very uncertain (RR 2.39, 95% CI 1.60 to 3.59; 1 study; 122 teeth; very low-certainty evidence). Same result was obtained when considering the root as unit of analysis at one year (RR 1.59, 95% CI 1.20 to 2.09; 1 study; 127 roots; very low-certainty evidence). - Glass ionomer cement versus amalgam: the evidence is very uncertain about the effect of glass ionomer cement compared with amalgam on success rate at one year, with results indicating glass ionomer cement may reduce or have no effect on success rate (RR 0.98, 95% CI 0.86 to 1.12; 1 study; 105 teeth; very low-certainty evidence). - MTA versus root repair material (RRM): there may be little to no effect of MTA compared to RRM on success rate at one year, but the evidence is very uncertain (RR 1.00, 95% CI 0.94 to 1.07; I = 0%; 2 studies; 278 teeth; very low-certainty evidence). Adverse events were not assessed by any of the included studies.
AUTHORS' CONCLUSIONS
Based on the present limited evidence, there is insufficient evidence to draw any conclusion as to the benefits of any one material over another for retrograde filling in root canal therapy. We conclude that more high-quality RCTs are required.
Topics: Adult; Child; Crowns; Glass Ionomer Cements; Humans; Root Canal Therapy
PubMed: 34647617
DOI: 10.1002/14651858.CD005517.pub3 -
BMC Oral Health Dec 2023The goal behind this study is to answer the question "In tooth-supported fixed partial dentures (FPDs), does the digital impression techniques compared to fabrications... (Meta-Analysis)
Meta-Analysis
PURPOSE OF THE STUDY
The goal behind this study is to answer the question "In tooth-supported fixed partial dentures (FPDs), does the digital impression techniques compared to fabrications using conventional impression methods improve the marginal and internal fit?
BACKGROUND
The incorporation of digital technology in the fabrication of fixed partial dentures (FPDs) has accelerated over the past decade. This study is directed at evaluating the marginal and internal fit of FPDs manufactured using digital approaches compared to conventional techniques. The need for updated data has encouraged this review.
MATERIALS AND METHODS
An electronic search was conducted in PubMed, Scopus, Web of Science, and the Grey Database to identify relevant studies. The Modified Methodological Index for Non-Randomized Studies (MINORS) was used to assess the risk of bias in in vitro experiments. The key results of this meta-analysis were the standard mean differences (SMDs) and 95% confidence intervals (CI) of each main variance, marginal fit, and internal fit between the digital and conventional techniques. Additional analyses were performed to assess the significance of three subgroup parameters: method of digitalization, cement spacer thickness, and span length, and their influence on the fit of the FPDs.
RESULTS
Based on predefined criteria, of the seven articles included in this systematic review, only five were selected for the quantitative data analysis. The marginal fit results were (P = 0.06; SMD: -1.88; 95% CI: - 3.88, 0.11) (P > 0.05) and the internal fit results were (P = 0.02; SMD: -0.80; 95% CI: - 1.49, - 0.10) (P < 0.05). Regarding the subgroup analyses, the method of digitalization subgroup results were (P = 0.35; SMD: -1.89; 95% CI: - 3.89, 0.11) and (P = 0.80; SMD: -0.80; 95% CI: - 1.49, - 0.11) for marginal and internal fit, respectively. The span length results were (P = 0.10; SMD: -1.89; 95% CI: - 3.89, 0.11) for marginal fit and (P = 0.02; SMD: -0.80; 95% CI: - 1.49, - 0.11) for internal fit. The cement spacer thickness (P = 0.01; SMD: -1.89; 95% CI: - 3.89, 0.11) and (P = 0.04; SMD: -0.80; 95% CI: - 1.49, - 0.11) for marginal and internal fit, respectively.
CONCLUSION
Tooth-retained fixed partial dentures FPDs produced by digital scanning and computer-aided design/computer-aided manufacturing (CAD/CAM) systems can significantly enhance the internal fit compared with those manufactured by traditional methods. Intraoral scanners can replace conventional impressions for the fabrication of FPDs because they minimize the operating time and reduce patient pain. Further clinical studies are required to obtain more conclusive results.
SYSTEMATIC REVIEW REGISTRATION
This systematic review and meta-analysis was registered in the International Prospective Register of Systematic Reviews (PROSPERO), registration number CRD42021261397.
Topics: Humans; Dental Marginal Adaptation; Denture, Partial, Fixed; Computer-Aided Design; Research Design; Dental Prosthesis Design
PubMed: 38049754
DOI: 10.1186/s12903-023-03628-1