-
Journal of Food Protection Jan 2021Almonds rejected as inedible are often used for production of almond oil. However, low-quality almonds are frequently contaminated with aflatoxins, and little is known...
ABSTRACT
Almonds rejected as inedible are often used for production of almond oil. However, low-quality almonds are frequently contaminated with aflatoxins, and little is known regarding transfer of aflatoxins to almond oil during processing. In this study, oil was produced from reject almonds by hexane extraction. Of 19 almond samples that were naturally contaminated with aflatoxins, 17 oil samples contained measurable amounts of aflatoxins, and aflatoxin content of contaminated oil was correlated with aflatoxin content of the nuts. However, oil aflatoxin levels were not correlated with the oxidation level of the oil as measured by percent free fatty acids and peroxide value. Adsorbents used in oil refining were tested for their ability to remove aflatoxins from contaminated oil. Fuller's earth and bentonite were the most effective, removing 96 and 86% of total aflatoxins from contaminated oil samples, respectively. Treatment with diatomaceous earth, in contrast, had no effect on aflatoxin levels in oil. These results show that oil refining steps using mineral clay adsorbents may also function to remove aflatoxins from contaminated oil.
Topics: Aflatoxins; Nuts; Plant Oils; Prunus dulcis
PubMed: 32882027
DOI: 10.4315/JFP-20-229 -
Science & Justice : Journal of the... May 2023Environmental trace evidence offers useful circumstantial intelligence to link persons and scenes of forensic interest. An increasing empirical research base is...
Environmental trace evidence offers useful circumstantial intelligence to link persons and scenes of forensic interest. An increasing empirical research base is dedicated towards understanding the transfer and persistence dynamics of environmental indicators including pollen, soils, and diatoms, within a diverse range of experimental frameworks. This paper presents two discrete studies exploring transfer and persistence of soils and sediments on footwear and diatomaceous earth adhered to clothing in forensically pertinent scenarios. Variables including sediment type, foot position, clothing type, and body positioning were also explored throughout. Both experiments incorporated a field-based methodology during the sampling effort. Photographs were collected of an initial transfer sample and of a retained assemblage following hours, days, and up to one-week of wear, facilitating macroscopic assessment of trace evidence dynamics. All images were processed using accessible, open-source software before spatial analysis of evidence distribution within and temporal assessment (% retention) upon each evidential surface. The results highlighted consistent loss of transferred sediment from footwear with significantly greater retention of loamy clay soil than dune sand which was absent beyond 24 h of wear. Loss was not influenced by wearer gait but was more rapid from those areas of the shoe sole in direct contact with the ground. Diatomaceous earth was retrieved from all three clothing types tested after one week - significant losses of material occurred before 48 h with a consistent assemblage identified beyond this. Denim was significantly more effective than acrylic and fleece for diatomaceous earth retention and significantly more material was lost from clothing worn on the lower body. These findings highlight the value of using visual environmental markers and a macroscopic analytical approach during the investigation of environmental trace dynamics. The methodology offers a novel, non-destructive assessment of soil and diatom transfer and persistence, complementing more extensive laboratory-based examinations to ensure the development of a well-rounded research base within the forensic sciences.
Topics: Humans; Clothing; Diatomaceous Earth; Forensic Medicine; Shoes; Forensic Sciences; Soil
PubMed: 37169463
DOI: 10.1016/j.scijus.2023.03.004 -
Insects Jun 2021The selective application of insecticides is one of the cornerstones of integrated pest management (IPM) and management strategies for pest resistance to insecticides.... (Review)
Review
The selective application of insecticides is one of the cornerstones of integrated pest management (IPM) and management strategies for pest resistance to insecticides. The present work provides a comprehensive overview of the traditional and new methods for the application of gas, liquid, gel, and solid physical insecticide formulations to control stored-product and food industry urban pests from the taxa Acarina, Blattodea, Coleoptera, Diptera, Hymenoptera, Lepidoptera, Psocoptera, and Zygentoma. Various definitions and concepts historically and currently used for various pesticide application formulations and methods are also described. This review demonstrates that new technological advances have sparked renewed research interest in the optimization of conventional methods such as insecticide aerosols, sprays, fumigants, and inert gases. Insect growth regulators/disruptors (IGRs/IGDs) are increasingly employed in baits, aerosols, residual treatments, and as spray-residual protectants for long-term stored-grain protection. Insecticide-impregnated hypoxic multilayer bags have been proven to be one of the most promising low-cost and safe methods for hermetic grain storage in developing countries. Insecticide-impregnated netting and food baits were originally developed for the control of urban/medical pests and have been recognized as an innovative technology for the protection of stored commodities. New biodegradable acaricide gel coatings and nets have been suggested for the protection of ham meat. Tablets and satchels represent a new approach for the application of botanicals. Many emerging technologies can be found in the form of impregnated protective packaging (insect growth regulators/disruptors (IGRs/IGDs), natural repellents), pheromone-based attracticides, electrostatic dust or sprays, nanoparticles, edible artificial sweeteners, hydrogels, inert baits with synthetic attractants, biodegradable encapsulations of active ingredients, and cyanogenic protective grain coatings. Smart pest control technologies based on RNA-based gene silencing compounds incorporated into food baits stand at the forefront of current strategic research. Inert gases and dust (diatomaceous earth) are positive examples of alternatives to synthetic pesticide products, for which methods of application and their integration with other methods have been proposed and implemented in practice. Although many promising laboratory studies have been conducted on the biological activity of natural botanical insecticides, published studies demonstrating their effective industrial field usage in grain stores and food production facilities are scarce. This review shows that the current problems associated with the application of some natural botanical insecticides (e.g., sorption, stability, field efficacy, and smell) to some extent echo problems that were frequently encountered and addressed almost 100 years ago during the transition from ancient to modern classical chemical pest control methods.
PubMed: 34209742
DOI: 10.3390/insects12070590 -
Toxicology of diatomaceous earth, phyto oils and their admixed emulsions against adults of (Herbst).Toxicology Reports 2022(Herbst), one of the invasive stored pest, is resistant to the most of synthetic insecticides used against this it. Moreover, synthetic insecticides are a major threat...
(Herbst), one of the invasive stored pest, is resistant to the most of synthetic insecticides used against this it. Moreover, synthetic insecticides are a major threat to human health, the environment, and the ecosystem. The development of some smart tools is needed to minimize the use of hazardous chemicals. As an alternative, nano-insecticides are on the horizon. Emulsions are expressed as sustain release of insecticidal components to achieve maximum efficacy and low residual toxicity. In this study, some essential oils ( (DC.) Stapf, L., L., and L.), diatomaceous earth (DE), and their nano-emulsions are evaluated against . Essential oils and DE were tested at four (60 ppm, 30 ppm, 15 ppm, 7.5 ppm) different concentrations with and without emulsions, and data was recorded after 6, 12, 24, 48, and 72 h of exposure respectively. The mortality observed in essential oils of , , and without emulsion after 72 h of treatment at the highest concentration was 98%, 95%, and 85%, respectively. While, at the highest concentration the lowest mortalities were observed with DE and i.e. 65%. Insecticidal activity of emulsion essential oils increased to 100%, 98%, 90%, and 68.3% for , , , and , respectively. The results support that these admixed emulsions could be used as an alternative to synthetic insecticides in conventional formulations.
PubMed: 36518385
DOI: 10.1016/j.toxrep.2022.05.011 -
Insects Nov 2020At a time when there is much talk of reducing pesticide use and the implementation of integrated pest management, mainly in fields and glass-houses, it is appropriate to... (Review)
Review
At a time when there is much talk of reducing pesticide use and the implementation of integrated pest management, mainly in fields and glass-houses, it is appropriate to consider how cereals in storage are handled and what measures are taken to protect them against insects and other pests. For decades, the use of various synthetic pesticides has been the basis for the proper and long-term storage of cereals, primarily free of insects and mites, but also fungi and their mycotoxins and rodents. However, due to the registered negative effects of synthetic pesticides, such as dichloro-diphenyl-trihloroethane (DDT) or methyl bromide, on human health and the environment, and the appearance of resistance to, e.g., malathion, researchers have been looking for new acceptable control measures. Due to the proven and published non-acceptable data regarding synthetic pesticide effects, a combination of physical, mechanical, and biological measures with the minimal use of synthetic pesticides, under the name of integrated pest management, have been promoted. These combinations include high and low temperatures; the removal of dockages; and the application of pheromones, diatomaceous earth, and natural compounds from various plants, as well as inert gases, predators, and parasites. A ban of any synthetic pesticide usage is currently being considered, which emphasizes the fact that protection should only be performed by measures that do not leave harmful residues. However, the facts show that the application of physical, mechanical, and/or biological measures, besides the fact that they are not necessarily efficient, is very demanding because more knowledge and experience is required, as well as better equipment, greater financial investment, and awareness raising not only for agricultural producers and storage keepers, but also for consumers. In order to use these measures, which are less hazardous to humans and the environment, it is necessary to adapt regulations not only to speed up the registration protocols of low-risk pesticides, but also to prescribe criteria for placing agricultural products on the market, as well as quality standards, i.e., the permitted number of present insects, in addition to their parts in certain types of food. Additionally, we should be aware of control measures for protecting novel food and other non-traditional foods. It is important to continue to combine different protection measures, namely integrated pest management, until all of the other new procedures that must be carried out during the period of storing cereals and other products are clear, in order to ensure the best quality of final products for consumers.
PubMed: 33260599
DOI: 10.3390/insects11120846 -
Materials (Basel, Switzerland) Feb 2022In this study, the potential use of waste diatomaceous earth from the production of diatomaceous earth for filtration purposes, as an alternative raw material for foam...
In this study, the potential use of waste diatomaceous earth from the production of diatomaceous earth for filtration purposes, as an alternative raw material for foam glass production, was explored. The chemical and mineralogical composition and the high temperature behavior of waste diatomite were studied to assess its suitability for foam glass production. Glass-ceramic foams were prepared using NaOH solution as a foaming agent, via a hydrate mechanism. The influence of different pretreatments and firing temperatures on the foam's structure, bulk density and compressive strength was investigated. High temperature behavior was studied using TG/DTA analysis and high temperature microscopy. Phase composition was studied using X-ray diffraction analysis. Glass-ceramic foam samples of a high porosity comparable to conventional foam glass products were fabricated. The pretreatment temperature, foaming temperature and sintering holding time were found to have a significant influence on foam properties. With increased pretreatment temperature, pyrogenic carbon from the thermal decomposition of organic matter contained in the raw material acted as an additional foaming agent and remained partially unoxidized in prepared foams. The bulk densities of prepared samples ranged from 150 kg/m to 510 kg/m and their compressive strengths were between 140 and 1270 kPa.
PubMed: 35207924
DOI: 10.3390/ma15041384 -
Pharmaceutics Oct 2019Unicellular diatom microalgae are a promising natural resource of porous biosilica. These microorganisms produce around their membrane a highly porous and extremely... (Review)
Review
Unicellular diatom microalgae are a promising natural resource of porous biosilica. These microorganisms produce around their membrane a highly porous and extremely structured silica shell called frustule. Once harvested from living algae or from fossil sediments of diatomaceous earth, this biocompatible and non-toxic material offers an exceptional potential in the field of micro/nano-devices, drug delivery, theranostics, and other medical applications. The present review focused on the use of diatoms in the field of drug delivery systems, with the aim of presenting the different strategies implemented to improve the biophysical properties of this biosilica in terms of drug loading and release efficiency, targeted delivery, or site-specific binding capacity by surface functionalization. The development of composite materials involving diatoms for drug delivery applications is also described.
PubMed: 31618958
DOI: 10.3390/pharmaceutics11100537 -
Nano Convergence Oct 2021As the second wave of COVID-19 hits South Asia, an increasing deadly complication 'fungal infections (such as Mycosis, Candida and Aspergillus) outbreak' has been raised...
As the second wave of COVID-19 hits South Asia, an increasing deadly complication 'fungal infections (such as Mycosis, Candida and Aspergillus) outbreak' has been raised concern about the insufficient technologies and medicals for its diagnosis and therapy. Biosilica based nano-therapy can be used for therapeutic efficacy, yet their direct role as antibiotic agent with biocompatibility and stability remains unclear. Here, we report that a diatomaceous earth (DE) framework semiconductor composite conjugated DE and in-house synthesized zinc oxide (DE-ZnO), as an antibiotic agent for the enhancement of antibiotic efficacy and persistence. We found that the DE-ZnO composite had enhanced antibiotic activity against fungi (A. fumigatus) and Gram-negative bacteria (E. coli, S. enterica). The DE-ZnO composite provides enhancing large surface areas for enhancement of target pathogen binding affinity, as well as produces active ions including reactive oxygen species and metal ion for breaking the cellular network of fungi and Gram-negative bacteria. Additionally, the toxicity of DE-ZnO with 3 time less amount of dosage is 6 times lower than the commercial SiO-ZnO. Finally, a synergistic effect of DE-ZnO and existing antifungal agents (Itraconazole and Amphotericin B) showed a better antifungal activity, which could be reduced the side effects due to the antifungal agents overdose, than a single antibiotic agent use. We envision that this DE-ZnO composite can be used to enhance antibiotic activity and its persistence, with less-toxicity, biocompatibility and high stability against fungi and Gram-negative bacteria which could be a valuable candidate in medical science and industrial engineering.
PubMed: 34694514
DOI: 10.1186/s40580-021-00283-6 -
Anais Da Academia Brasileira de Ciencias 2023Diatomaceous earth is an organic naturally occurring material rich in silicon. This silicon source can be used in organic agriculture, it also has a great potential of...
Diatomaceous earth is an organic naturally occurring material rich in silicon. This silicon source can be used in organic agriculture, it also has a great potential of use in the acclimatization of crops. However, there are no reports of the effects of diatomaceous earth supplementation on the micropropagation of sweet potato. Thus, the objective of this study was to evaluate the effects of different concentrations of diatomaceous earth applied in vitro on the growth, physiology and anatomy of sweet potato cv. 'Brazlândia Branca' after acclimatization. Four concentrations of diatomaceous earth. After 30 days of in vitro growth, the plants were transferred to a greenhouse for acclimatization. After 45 days, leaf number, shoot and root length, fresh and dry shoot and root mass, gas exchange, chlorophyll content, root and leaf anatomy. The experimental design was completely randomized. The supplementation of diatomaceous earth in the in vitro cultivation had beneficial effects, increasing the accumulation of mass, improving the photosynthetic apparatus and promoting favorable anatomical characteristics during the acclimatization of the sweet potato plants. In addition, the use of diatomaceous earth achieved adequate seedling development, with higher seedling quality and resistance to biotic and abiotic effects than attained with control treatment.
Topics: Diatomaceous Earth; Solanum tuberosum; Ipomoea batatas; Silicon; Acclimatization
PubMed: 37585889
DOI: 10.1590/0001-3765202320200021 -
Veterinary Sciences Sep 2023The blood-sucking mites ("red mite"), ("northern fowl mite"), and ("tropical fowl mite") stand out for causing infestations in commercial poultry farms worldwide,... (Review)
Review
The blood-sucking mites ("red mite"), ("northern fowl mite"), and ("tropical fowl mite") stand out for causing infestations in commercial poultry farms worldwide, resulting in significant economic damage for producers. In addition to changes in production systems that include new concerns for animal welfare, global climate change in recent years has become a major challenge in the spread of ectoparasites around the world. This review includes information regarding the main form of controlling poultry mites through the use of commercially available chemicals. In addition, non-chemical measures against blood-sucking mites were discussed such as extracts and oils from plants and seeds, entomopathogenic fungi, semiochemicals, powder such as diatomaceous earth and silica-based products, and vaccine candidates. The control of poultry mites using chemical methods that are currently used to control or eliminate them are proving to be less effective as mites develop resistance. In contrast, the products based on plant oils and extracts, powders of plant origin, fungi, and new antigens aimed at developing transmission-blocking vaccines against poultry mites provide some encouraging options for the rational control of these ectoparasites.
PubMed: 37888541
DOI: 10.3390/vetsci10100589