-
Materials (Basel, Switzerland) Dec 2022Portland cement porous concrete (PCPC) has received immense interest recently due to its environmental aids. Its porous structure helps to reduce the water runoff amount...
Portland cement porous concrete (PCPC) has received immense interest recently due to its environmental aids. Its porous structure helps to reduce the water runoff amount while improving the recharge of groundwater. Earlier studies have concentrated on illustrating and knowing the functional as well as structural properties of PCPC. However, very few studies are available on PCPC in combination with natural silica sources as supplementary cementitious materials (SCMs). Most SCMs are by-products of industrial manufacturing processes and cause some environmental concerns, but with their pozzolanic effect, they could be utilized as partial substitute materials for ordinary Portland cement (OPC) to enhance the strength as well as durability performance. The aim of this study is to evaluate the effects of diatomaceous earth (DE) as a supplementary cementitious material for partial substitution of OPC for Portland cement porous concrete application. Compression strength, split tensile strength, and flexural strength tests were performed to determine the effect of partial replacement. To investigate the impact of test variables, basic tests, including void content and water permeability, were also performed. Compared to the control concrete, the results show that a 15% replacement of cement with DE significantly increased the compressive strength (by 53%) while also providing adequate porosity and better water permeability. Statistical analysis (ANOVA) and regression analysis showed that there is a significant (p < 0.05) growth within the physical characteristics of concrete upon the replacement of cement by 15% DE. Collectively, the replacement of cement with DE could not only improve the concrete strength but also reduce the consumption of cement, thereby lessening the cost of construction as well as indirectly reducing the carbon footprint.
PubMed: 36614394
DOI: 10.3390/ma16010048 -
Biotechnology Progress Mar 2022Titer improvement has driven process intensification in mAb manufacture. However, this has come with the drawback of high cell densities and associated process related...
Titer improvement has driven process intensification in mAb manufacture. However, this has come with the drawback of high cell densities and associated process related impurities such as cell debris, host cell protein (HCP), and DNA. This affects the capacity of depth filters and can lead to carryover of impurities to protein A chromatography leading to early resin fouling. New depth filter materials provide the opportunity to remove more process related impurities at this early stage in the process. Hence, there is a need to understand the mechanism of impurity removal within these filters. In this work, the secondary depth filter Millistak+ X0HC (cellulose and diatomaceous earth) is compared with the X0SP (synthetic), by examining the breakthrough of DNA and HCP. Additionally, a novel method was developed to image the location of key impurities within the depth filter structure under a confocal microscope. Flux, tested at 75, 100, and 250 LMH was found to affect the maximal throughput based on the max pressure of 30 psi, but no significant changes were seen in the HCP and DNA breakthrough. However, a drop in cell culture viability, from 87% to 37%, lead to the DNA breakthrough at 10% decreasing from 81 to 55 L/m for X0HC and from 105 to 47 L/m for X0SP. The HCP breakthrough was not affected by cell culture viability or filter type. The X0SP filter has a 30%-50% higher max throughput depending on viability, which can be explained by the confocal imaging where the debris and DNA are distributed differently in the layers of the filter pods, with more of the second tighter layer being utilized in the X0SP.
Topics: Animals; CHO Cells; Chromatography; Cricetinae; Cricetulus; Filtration; Microscopy, Confocal; Proteins
PubMed: 35037432
DOI: 10.1002/btpr.3233 -
Cells Aug 2022This paper analyses the impact of the diatomaceous earth/peat (DEP; 3:1) microbial carrier on changes in the bacterial microbiome and the development of biofilm in the...
This paper analyses the impact of the diatomaceous earth/peat (DEP; 3:1) microbial carrier on changes in the bacterial microbiome and the development of biofilm in the anaerobic digestion (AD) of confectionery waste, combined with digested sewage sludge as inoculum. The physicochemical properties of the carrier material are presented, with particular focus on its morphological and dispersion characteristics, as well as adsorption and thermal properties. In this respect, the DEP system was found to be a suitable carrier for both mesophilic and thermophilic AD. The evaluation of quantitative and qualitative changes in the genetic diversity of bacterial communities, carried out using next-generation sequencing (NGS), showed that the material has a modifying effect on the bacterial microbiome. While Actinobacteria was the most abundant cluster in the WF-control sample (WF-waste wafers), Firmicutes was the dominant cluster in the digested samples without the carrier (WF-dig.; dig.-digested) and with the carrier (WF + DEP). The same was true for the count of Proteobacteria, which decreased twofold during biodegradation in favor of Synergistetes. The cluster was identified as the most abundant genus in the two samples, particularly in WF + DEP. This information was supplemented by observations of morphological features of microorganisms carried out using fluorescence microscopy. The biodegradation process itself had a significant impact on changes in the microbiome of samples taken from anaerobic bioreactors, reducing its biodiversity. As demonstrated by the results of this innovative method, namely the BioFlux microfluidic flow system, the decrease in the number of taxa in the digested samples and the addition of DEP contributed to the microbial adhesion in the microfluidic system and the formation of a stable biofilm.
Topics: Anaerobiosis; Bacteria; Bioreactors; Diatomaceous Earth; Genetic Variation; Sewage; Soil
PubMed: 36010646
DOI: 10.3390/cells11162571 -
Molecules (Basel, Switzerland) Nov 2022Frequent monitoring of sea food, especially shellfish samples, for the presence of biotoxins serves not only as a valuable strategy to mitigate adulteration associated...
Frequent monitoring of sea food, especially shellfish samples, for the presence of biotoxins serves not only as a valuable strategy to mitigate adulteration associated health risks, but could also be used to develop predictive models to understand algal explosion and toxin trends. Periodic toxin assessment is often restricted due to poor sensitivity, multifarious cleaning/extraction protocols and high operational costs of conventional detection methods. Through this work, a simplistic approach to quantitatively assess the presence of a representative marine neurotoxin, Domoic acid (DA), from spiked water and crab meat samples is presented. DA sensing was performed based on surface-enhanced Raman scattering (SERS) using silver nanoparticle enriched diatomaceous earth—a biological photonic crystal material in nature. Distinctive optical features of the quasi-ordered pore patterns in diatom skeleton with sporadic yet uniform functionalization of silver nanoparticles act as excellent SERS substrates with improved DA signals. Different concentrations of DA were tested on the substrates with the lowest detectable concentration being 1 ppm that falls well below the regulatory DA levels in seafood (>20 ppm). All the measurements were rapid and were performed within a measurement time of 1 min. Utilizing the measurement results, a standard calibration curve between SERS signal intensity and DA concentration was developed. The calibration curve was later utilized to predict the DA concentration from spiked Dungeness crab meat samples. SERS based quantitative assessment was further complemented with principal component analysis and partial least square regression studies. The tested methodology aims to bring forth a sensitive yet simple, economical and an extraction free routine to assess biotoxin presence in sea food samples onsite.
Topics: Silver; Metal Nanoparticles; Kainic Acid; Spectrum Analysis, Raman; Seafood
PubMed: 36500455
DOI: 10.3390/molecules27238364 -
Materials (Basel, Switzerland) Oct 2020New composites containing a natural filler made of diatom shells (frustules), permitting the modification of polylactide matrix, were produced by Fused Deposition...
New composites containing a natural filler made of diatom shells (frustules), permitting the modification of polylactide matrix, were produced by Fused Deposition Modelling (3D printing) and were thoroughly examined. Two mesh fractions of the filler were used, one of <40 µm and the other of 40-63 µm, in order to check the effect of the filler particle size on the composite properties. The composites obtained contained diatom shells in the concentrations from 0% to 5% wt. (0-27.5% vol.) and were subjected to rheological analysis. The composites obtained as filaments of 1.75 mm in diameter were used for 3D printing. The printed samples were characterized as to hydrophilic-hydrophobic, thermal and mechanical properties. The functional parameters of the printed objects, e.g., mechanical characteristics, stability on contact with water and water contact angle, were measured. The results revealed differences in the processing behavior of the samples as well as the effect of secondary granulation of the filler on the parameters of the printing and mechanical properties of the composites.
PubMed: 33081398
DOI: 10.3390/ma13204632 -
Alkalinity Regulation and Optimization of Cementitious Materials Used in Ecological Porous Concrete.Materials (Basel, Switzerland) Apr 2024Ecological porous concrete (EPC) is one of the novel formulations of concrete with unique phytogenic properties. However, achieving both low alkalinity and high strength...
Ecological porous concrete (EPC) is one of the novel formulations of concrete with unique phytogenic properties. However, achieving both low alkalinity and high strength in EPC proves challenging due to the inherently high alkalinity of the pore environment, which hinders the growth of the plant and affects its ecological benefits significantly. This research investigated the utilization of 15 types of chemical admixtures and diatomaceous earth as alkali-reducing agents to optimize the properties of silicate cementitious materials for the applications of EPC. To identify the most effective agents, the pH value and compressive strength of the cement paste were adopted as the screening criteria for the selection of the essential alkali-reducing ingredients. Subsequently, a composite approach combining chemical admixtures and DE was employed to explore the synergistic effects on the pH and strength of silicate cementitious materials. The results revealed that a combination of 8% DE, 5% oxalic acid, and 5% iron sulfate functioned effectively and resulted in desirable performance for the concrete. This synergistic blend effectively consumed a large amount of Ca(OH), reducing the pH of cement paste to 10.48 within 3 days. Furthermore, the hydration reaction generated C-S-H with a low Ca/Si ratio, leading to a remarkable increase in the compressive strength of the concrete, reaching 89.7 MPa after 56 days. This composite approach ensured both low alkalinity and high strength in silicate cementitious materials, providing a theoretical basis for the application and promotion of EPC in the ecological field.
PubMed: 38673275
DOI: 10.3390/ma17081918 -
RSC Advances Aug 2019Molecular based diagnostic methods rely on the amplification of pathogen DNA but naked eye visualization of results is still challenging. We present here a simple and...
Molecular based diagnostic methods rely on the amplification of pathogen DNA but naked eye visualization of results is still challenging. We present here a simple and highly reliable DNA amplification readout system for naked eye detection of isothermally or PCR amplified DNA in less than 30 seconds. This system utilizes spermine to precipitate DNA amplicons and initiate bridging flocculation of a mix of charcoal and diatomaceous earth particles in suspension. In the absence of amplification, the charcoal particles remain suspended resulting in a black, non-transparent colloid solution while positive samples in which DNA amplification has occurred can be identified within seconds as the particles flocculate and settle leaving a transparent liquid phase. We have coupled this method with our rapid dipstick DNA purification method and isothermal DNA amplification to create a simple four-step diagnostic system that can be preassembled to reduce unnecessary manipulation in the field. The method's simplicity, low cost, minimal equipment and clear presence/absence readout makes it ideal for rapid diagnostic testing in the laboratory and in situations where users have limited technical training or resources including high school science classes and field-based research.
PubMed: 35527854
DOI: 10.1039/c9ra04725e -
Biosensors Feb 2023(MTB) is a communicable disease and still remains a threat to common health. Thus, early diagnosis and treatment are required to prevent the spread of infection....
(MTB) is a communicable disease and still remains a threat to common health. Thus, early diagnosis and treatment are required to prevent the spread of infection. Despite the recent advances in molecular diagnostic systems, the commonly used MTB diagnostic tools are laboratory-based assays, such as mycobacterial culture, MTB PCR, and Xpert MTB/RIF. To address this limitation, point-of-care testing (POCT)-based molecular diagnostic technologies capable of sensitive and accurate detection even in environments with limited sources are needed. In this study, we propose simple tuberculosis (TB) molecular diagnostic assay by combining sample preparation and DNA-detection steps. The sample preparation is performed using a syringe filter with amine-functionalized diatomaceous earth and homobifunctional imidoester. Subsequently, the target DNA is detected by quantitative PCR (polymerase chain reaction). The results can be obtained within 2 h from samples with large volumes, without any additional instruments. The limit of detection of this system is 10 times higher than those of conventional PCR assays. We validated the clinical utility of the proposed method in 88 sputum samples obtained from four hospitals in the Republic of Korea. Overall, the sensitivity of this system was superior to those of other assays. Therefore, the proposed system can be useful for MTB diagnosis in limited-resource settings.
Topics: Humans; Mycobacterium tuberculosis; Tuberculosis, Pulmonary; Pathology, Molecular; Sensitivity and Specificity; Sputum; Molecular Diagnostic Techniques
PubMed: 36832025
DOI: 10.3390/bios13020259 -
Polymers Oct 2022Increasing contamination risk from oil/organic liquid leakage creates strong demand for the development of absorbents with excellent hydrophobicity and absorption...
Increasing contamination risk from oil/organic liquid leakage creates strong demand for the development of absorbents with excellent hydrophobicity and absorption capacity. Herein, bagasse was carbonized to form porous char with a special structure of array-style and vertically perforated channels, and then the activation process enlarged the pore volume of the char. With the cooperation of low-surface-energy polydimethylsiloxane and diatomaceous earth particles, the modified activated carbon aerogel (MACA) was fabricated by modifying the surface coating and mastoid structure on the bagasse char. Moreover, the MACA demonstrates high porosity oil-water separation, hydrophobicity, and considerable absorption capacity (4.06-12.31 /) for gasoline and various organic solvents. This work converts agricultural waste into an efficient porous adsorbent, offering a scalable and commercially feasible solution to solving the leakages of oil/organic solvents.
PubMed: 36365572
DOI: 10.3390/polym14214579 -
Materials (Basel, Switzerland) Sep 2022The poly(lactic acid) (PLA) biodegradable polymer, as well as natural, siliceous reinforcement in the form of diatomaceous earth, fit perfectly into the circular economy...
The poly(lactic acid) (PLA) biodegradable polymer, as well as natural, siliceous reinforcement in the form of diatomaceous earth, fit perfectly into the circular economy trend. In this study, various kinds of commercial PLA have been reinforced with diatomaceous earth (DE) to prepare biodegradable composites via the extrusion process. The structure of the manufactured composites as well as adhesion between the matrix and the filler were investigated using scanning electron microscopy (SEM). Differential scanning calorimetry (DSC) analyses were carried out to determine crystallinity of PLA matrix as function of DE additions. Additionally, the effect of the ceramic-based reinforcement on the mechanical properties (Young's modulus, elongation to failure, ultimate tensile strength) of PLA has been investigated. The results are discussed in terms of possible applications of PLA + DE composites.
PubMed: 36143522
DOI: 10.3390/ma15186210