-
Chemosphere Jan 2023In 2019, 368 mln tonnes of plastics were produced worldwide. Likewise, the textiles and apparel industry, with an annual revenue of 1.3 trillion USD in 2016, is one of... (Review)
Review
In 2019, 368 mln tonnes of plastics were produced worldwide. Likewise, the textiles and apparel industry, with an annual revenue of 1.3 trillion USD in 2016, is one of the largest fast-growing industries. Sustainable use of resources forces the development of new plastic and textile recycling methods and implementation of the circular economy (reduce, reuse and recycle) concept. However, circular use of plastics and textiles could lead to the accumulation of a variety of contaminants in the recycled product. This paper first reviewed the origin and nature of potential hazards that arise from recycling processes of plastics and textiles. Next, we reviewed current analytical methods and safety assessment frameworks that could be adapted to detect and identify these contaminants. Various contaminants can end up in recycled plastic. Phthalates are formed during waste collection while flame retardants and heavy metals are introduced during the recycling process. Contaminants linked to textile recycling include; detergents, resistant coatings, flame retardants, plastics coatings, antibacterial and anti-mould agents, pesticides, dyes, volatile organic compounds and nanomaterials. However, information is limited and further research is required. Various techniques are available that have detected various compounds, However, standards have to be developed in order to identify these compounds. Furthermore, the techniques mentioned in this review cover a wide range of organic chemicals, but studies covering potential inorganic contamination in recycled materials are still missing. Finally, approaches like TTC and CoMSAS for risk assessment should be used for recycled plastic and textile materials.
Topics: Plastics; Flame Retardants; Recycling; Textiles; Industry
PubMed: 36370761
DOI: 10.1016/j.chemosphere.2022.137175 -
Journal of Exposure Science &... Jan 2022Existing models for estimating children's exposure to chemicals through mouthing currently depends on the availability of chemical- and material-specific experimental...
BACKGROUND
Existing models for estimating children's exposure to chemicals through mouthing currently depends on the availability of chemical- and material-specific experimental migration rates, only covering a few dozen chemicals.
OBJECTIVE
This study objective is hence to develop a mouthing exposure model to predict migration into saliva, mouthing exposure, and related health risk from a wide range of chemical-material combinations in children's products.
METHODS
We collected experimental data on chemical migration from different products into saliva for multiple substance groups and materials, identifying chemical concentration and diffusion coefficient as main properties of influence. To predict migration rates into saliva, we adapted a previously developed migration model for chemicals in food packaging materials. We also developed a regression model based on identified chemical and material properties.
RESULTS
Our migration predictions correlate well with experimental data (R = 0.85) and vary widely from 8 × 10 to 32.7 µg/10 cm/min, with plasticizers in PVC showing the highest values. Related mouthing exposure doses vary across chemicals and materials from a median of 0.005 to 253 µg/kg/d. Finally, we combined exposure estimates with toxicity information to yield hazard quotients and identify chemicals of concern for average and upper bound mouthing behavior scenarios.
SIGNIFICANCE
The proposed model can be applied for predicting migration rates for hundreds of chemical-material combinations to support high-throughput screening.
Topics: Child; Environmental Exposure; Food Packaging; Humans; Plasticizers; Saliva
PubMed: 34188178
DOI: 10.1038/s41370-021-00354-0 -
Environmental Research Nov 2022Microplastic (MP) ingestion, along with accumulated plasticizers such as bisphenol A (BPA), bisphenol F (BPF), and bisphenol S (BPS), and phthalates represented by...
Microplastic (MP) ingestion, along with accumulated plasticizers such as bisphenol A (BPA), bisphenol F (BPF), and bisphenol S (BPS), and phthalates represented by diethyl phthalate (DEP), dibutyl phthalate (DBP) and bis (2-ethylhexyl) phthalate (DEHP), were quantified in bivalves, fish, and holothurians collected from a coastal pristine area at the western Mediterranean Sea. MP ingestion in sediment-feeders holothurians (mean value 12.67 ± 7.31 MPs/individual) was statistically higher than ingestion in bivalves and fish (mean 4.83 ± 5.35 and 3 ± 4.44 MPs/individual, respectively). The main ingested polymers were polyethylene, polypropylene, and polystyrene. The levels of BPS, BPF, and DEHP were highest in bivalves' soft tissue; BPA and DBP had the highest levels in the holothurians' muscle. In addition, the levels of all plasticizers assessed were lowest in fish muscle; only BPA levels in fish were higher than in bivalves, with intermediate values between those of bivalves and holothurians. This study provides data on exposure to MPs and plasticizers of different species inhabiting Cabrera Marine Protected Area (MPA) and highlights the differences in MP ingestion and levels of plasticizers between species with different ecological characteristics and feeding strategies.
Topics: Animals; Benzhydryl Compounds; Bivalvia; Dibutyl Phthalate; Diethylhexyl Phthalate; Eating; Fishes; Microplastics; Phenols; Phthalic Acids; Plasticizers; Plastics
PubMed: 35948144
DOI: 10.1016/j.envres.2022.114034 -
Shokuhin Eiseigaku Zasshi. Journal of... 2023We determined the fifteen types of plasticizers, including four kinds of phthalic acid esters (PAEs) used in 220 polyvinyl chloride (PVC) toys on Japanese market from...
We determined the fifteen types of plasticizers, including four kinds of phthalic acid esters (PAEs) used in 220 polyvinyl chloride (PVC) toys on Japanese market from 2019 to 2020. Three kinds of previously undetected types of PAEs were also detected, but not identified in this study. Di (2-ethylhexyl) terephthalate (DEHTP) was the highest detection rate in 209 soft PVC toys out of 220 toys, with 71.2% for designated toys and 88.9% for not-designated toys, respectively, showing a gradual increase from the previous reports in 2009 and 2014. On the other hand, the usages of o-acetyl tributyl citrate and adipic acid esters decreased, but the six types of PAEs prohibited to use for the designated toys in Japan were not detected in them, the usage of diisobutyl phthalate were increased. In contrast, four types of PAEs were detected in not-designated toys. Among them, the detection ratio of di (2-ethyhexyl) phthalate decreased to about 1/10. The content levels of plasticizers in per each sample were continued to keep low level from the report five years ago. These results showed that the main plasticizer used in PVC toys is DEHTP, and that the usage of other plasticizers was decreased.
Topics: Plasticizers; Polyvinyl Chloride; Esters; Japan
PubMed: 37673604
DOI: 10.3358/shokueishi.64.145 -
MSystems Apr 2022Polyethylene (PE) is one of the most abundant plastics in the ocean. The development of a biofilm on PE in the ocean has been reported, yet whether some of the...
Polyethylene (PE) is one of the most abundant plastics in the ocean. The development of a biofilm on PE in the ocean has been reported, yet whether some of the biofilm-forming organisms can biodegrade this plastic in the environment remains unknown. Via metagenomics analysis, we taxonomically and functionally analyzed three biofilm communities using low-density polyethylene (LDPE) as their sole carbon source for 2 years. Several of the taxa that increased in relative abundance over time were closely related to known degraders of alkane and other hydrocarbons. Alkane degradation has been proposed to be involved in PE degradation, and most of the organisms increasing in relative abundance over time harbored genes encoding proteins essential in alkane degradation, such as the genes and CYP153, encoding an alkane monooxygenase and a cytochrome P450 alkane hydroxylase, respectively. Weight loss of PE sheets when incubated with these communities and chemical and electron microscopic analyses provided evidence for alteration of the PE surface over time. Taken together, these results provide evidence for the utilization of LDPE-associated compounds by the prokaryotic communities. This report identifies a group of genes potentially involved in the degradation of the LDPE polymeric structure and/or associated plastic additives in the ocean and describes a phylogenetically diverse community of plastic biofilm-dwelling microbes with the potential for utilizing LDPE-associated compounds as carbon and energy source. Low-density polyethylene (LDPE) is one of the most used plastics worldwide, and a large portion of it ends up in the ocean. Very little is known about its fate in the ocean and whether it can be biodegraded by microorganisms. By combining 2-year incubations with metagenomics, respiration measurements, and LDPE surface analysis, we identified bacteria and associated genes and metabolic pathways potentially involved in LDPE biodegradation. After 2 years of incubation, two of the microbial communities exhibited very similar taxonomic compositions mediating changes to the LDPE pieces they were incubated with. We provide evidence that there are plastic-biofilm dwelling bacteria in the ocean that might have the potential to degrade LDPE-associated compounds and that alkane degradation pathways might be involved.
Topics: Polyethylene; Microbial Consortia; Bacteria; Plastics; Oceans and Seas
PubMed: 35229650
DOI: 10.1128/msystems.01415-21 -
Molecules (Basel, Switzerland) Dec 2022One of the main routes of fish exposure to micro- and nanoplastics (MNPLs) is their ingestion. MNPLs can act as reservoirs of organic contaminants that are adsorbed onto...
One of the main routes of fish exposure to micro- and nanoplastics (MNPLs) is their ingestion. MNPLs can act as reservoirs of organic contaminants that are adsorbed onto their surfaces, or that can leach from their complex formulations, with potential impacts on biota and along the aquatic food chain. While MNPLs have been reported in fishes worldwide, complete information on MNPL compositions, polymers and additives continues to be scarce. In this work, the presence of MNPLs in the gastrointestinal tracts (GIT) of fish from the Ebro River (Spain) was investigated using a double suspected screening approach to assess and quantify polymers and additives. The sample-preparation procedure consisted of sequential alkaline and acidic digestions with KOH and HNO, followed by ultrasonic-assisted extraction (USAE) with toluene. The analysis of polymers was carried out with size-exclusion chromatography followed by high-resolution mass spectrometry using an atmospheric pressure photoionization source, operating in negative and positive ionisation modes (SEC-(±)-APPI-HRMS) using full-scan acquisition (FS). Plastic additives were assessed using high-performance liquid chromatography with a C18 analytical column coupled to HRMS equipped with an electrospray ionisation source operating under positive and negative conditions (LC-(±ESI)-HRMS). The acquisition was performed in parallel with full-scan (FS) and data-dependent scan (ddMS) modes, working under positive and negative ionisation modes. The polymers most frequently detected and quantified in fish GITs were polysiloxanes, polyethylene (PE), polypropylene (PP) and polystyrene (PS). PE was detected in 84% of the samples, with a concentration range from 0.55 to 3545 µg/g. On the other hand, plasticisers such as phthalates and stabilisers such as benzotriazoles were the most frequently identified plastic additives.
Topics: Animals; Polymers; Microplastics; Rivers; Fishes; Plastics; Gastrointestinal Tract; Polyethylene; Water Pollutants, Chemical
PubMed: 36615432
DOI: 10.3390/molecules28010239 -
Journal of Evolutionary Biology Sep 2022The social Hymenoptera have contributed much to our understanding of the evolution of sensory systems. Attention has focussed chiefly on how sociality and sensory...
The social Hymenoptera have contributed much to our understanding of the evolution of sensory systems. Attention has focussed chiefly on how sociality and sensory systems have evolved together. In the Hymenoptera, the antennal sensilla are important for optimizing the perception of olfactory social information. Social species have denser antennal sensilla than solitary species, which is thought to enhance social cohesion through nestmate recognition. In the current study, we test whether sensilla numbers vary between populations of the socially plastic sweat bee Halictus rubicundus from regions that vary in climate and the degree to which sociality is expressed. We found population differences in both olfactory and hygro/thermoreceptive sensilla numbers. We also found evidence that olfactory sensilla density is developmentally plastic: when we transplanted bees from Scotland to the south-east of England, their offspring (which developed in the south) had more olfactory hairs than the transplanted individuals themselves (which developed in Scotland). The transplanted bees displayed a mix of social (a queen plus workers) and solitary nesting, but neither individual nor nest phenotype was related to sensilla density. We suggest that this general, rather than caste-specific sensory plasticity provides a flexible means to optimize sensory perception according to the most pressing demands of the environment. Sensory plasticity may support social plasticity in H. rubicundus but does not appear to be causally related to it.
Topics: Animals; Bees; Hymenoptera; Phenotype; Plastics; Sensilla; Social Behavior
PubMed: 35849730
DOI: 10.1111/jeb.14065 -
Scientific Reports Nov 2022Plasticizers increase the flexibility of plastics. As environmental leachates they lead to increased water and soil pollution, as well as to serious harm to human...
Plasticizers increase the flexibility of plastics. As environmental leachates they lead to increased water and soil pollution, as well as to serious harm to human health. This study was set out to explore various web applications to predict the toxicological properties of plasticizers. Web-based tools (e.g., BOILED-Egg, LAZAR, PROTOX-II, CarcinoPred-EL) and VEGA were accessed via an 5th-10th generation computer in order to obtain toxicological predictions. Based on the LAZAR mutagenicity assessment was only bisphenol F predicted as mutagenic. The BBP and DBP in RF; DEHP in RF and XGBoost; DNOP in RF and XGBoost models were predicted as carcinogenic in the CarcinoPred-EL web application. From the bee predictive model (KNN/IRFMN) BPF, di-n-propyl phthalate, diallyl phthalate, dibutyl phthalate, and diisohexyl phthalate were predicted as strong bee toxicants. Acute toxicity for fish using the model Sarpy/IRFMN predicted 19 plasticizers as strong toxicants with LC50 values of less than 1 mg/L. This study also considered plasticizer effects on gastrointestinal absorption and other toxicological endpoints.
Topics: Animals; Humans; Bees; Plasticizers; Dibutyl Phthalate
PubMed: 36385271
DOI: 10.1038/s41598-022-18327-0 -
Chemosphere Dec 2022This review compiles the studies (2007-2021) regarding the occurrence of emerging organic contaminants (EOCs) and endocrine disruptors (EDs) in wastewater, surface water... (Review)
Review
This review compiles the studies (2007-2021) regarding the occurrence of emerging organic contaminants (EOCs) and endocrine disruptors (EDs) in wastewater, surface water and groundwater in Mexico. A total of 174 compounds were detected, including pharmaceuticals, hormones, plasticizers, personal care products, sweeteners, drugs, and pesticides considered as EDs. The levels of EOCs and EDs varied from ng/L to 140 mg/L, depending on the compound, location, and compartment. Raw wastewater was the most studied matrix, showing a greater abundance and number of detected compounds. Nevertheless, surface waters showed high concentrations of bisphenol-A, butylbenzil-phthalate, triclosan, pentachlorophenol, and the hormones estrone, 17 α-ethinylestradiol, and 17 β-estradiol, which exceeded the thresholds set by international guidelines. Concentrations of 17 α-ethinylestradiol and triclosan exceeding the above-mentioned limits were reported in groundwater. Cropland irrigation with raw wastewater was the principal activity introducing EOCs and EDs into groundwater. The groundwater abundance of EOCs was considerably lesser than that of wastewater, highlighting the attenuation capacity of soils/aquifers during wastewater infiltration. However, carbamazepine and N,N-diethyl-meta-toluamide showed higher concentrations in groundwater than those in wastewater, suggesting their accumulation/concentration in soils/pore-waters. Although the contamination of water resources represents one of the most environmental concerns in Mexico, this review brings to light the lack of studies on the occurrence of EOCs in Mexican waters, which is important for public health policies and for developing legislations that incorporates EOCs as priority contaminants in national water quality guidelines. Consequently, the development of legislations will support regulatory compliance for wastewater and drinking water, reducing the human exposure.
Topics: Carbamazepine; Cosmetics; Drinking Water; Endocrine Disruptors; Environmental Monitoring; Estradiol; Estrone; Groundwater; Humans; Mexico; Pentachlorophenol; Pesticides; Pharmaceutical Preparations; Plasticizers; Soil; Sweetening Agents; Triclosan; Wastewater; Water Pollutants, Chemical
PubMed: 36057353
DOI: 10.1016/j.chemosphere.2022.136285 -
Biomacromolecules Apr 2023Biopolymers are abundant, renewable, and biodegradable resources. However, bio-based materials often require toughening additives, like (co)polymers or small...
Biopolymers are abundant, renewable, and biodegradable resources. However, bio-based materials often require toughening additives, like (co)polymers or small plasticizing molecules. Plasticization is monitored via the glass transition temperature versus diluent content. To describe this, several thermodynamic models exist; nevertheless, most expressions are phenomenological and lead to over-parametrization. They also fail to describe the influence of sample history and the degree of miscibility via structure-property relationships. We propose a new model to deal with semi-compatible systems: the generalized mean model, which can classify diluent segregation or partitioning. When the constant is below unity, the addition of plasticizers has hardly any effect, and in some cases, even anti-plasticization is observed. On the other hand, when the is above unity, the system is highly plasticized even for a small addition of the plasticizer compound, which indicates that the plasticizer locally has a higher concentration. To showcase the model, we studied Na-alginate films with increasing sizes of sugar alcohols. Our analysis showed that blends have properties that depend on specific polymer interactions and morphological size effects. Finally, we also modeled other plasticized (bio)polymer systems from the literature, concluding that they all tend to have a heterogeneous nature.
Topics: Transition Temperature; Plasticizers; Temperature; Polymers; Biopolymers; Excipients
PubMed: 36889305
DOI: 10.1021/acs.biomac.2c01356