-
Molecular Biology Reports Sep 2023We investigated the toxicity and biocompatibility of a novel Mg-3Nd-1Gd-0.3Sr-0.2Zn-0.4Zr (abbreviated to Mg-Nd-Gd-Sr) alloy in the osteoblastic cell line MC3T3-E1 as...
BACKGROUND
We investigated the toxicity and biocompatibility of a novel Mg-3Nd-1Gd-0.3Sr-0.2Zn-0.4Zr (abbreviated to Mg-Nd-Gd-Sr) alloy in the osteoblastic cell line MC3T3-E1 as osteoblasts play an important role in bone repair and remodeling.
METHODS
We used cytotoxicity tests and apoptosis to investigate the effects of the Mg-Nd-Gd-Sr alloy on osteoblastic cells. Cell bioactivity, cell adhesion, cell proliferation, mineralization, ALP activity, and expression of BMP-2 and OPG by osteoblastic cells were also used to investigate the biocompatibility of Mg-Nd-Gd-Sr alloy.
RESULTS
The results showed that the Mg-Nd-Gd-Sr alloy had no obvious cytotoxicity, and did not induce apoptosis to MC3T3-E1 cells. Compared with the control group, the number of adherent cells within 12 h was increased significantly in each experimental group (P < 0.05); the OD value of MC3T3-E1 cells was increased significantly in each experimental group on days 1 and 3 of culture (P < 0.05); the number of mineralized nodules formed in each experimental group was significantly increased (P < 0.05), and ALP activity was significantly increased in each experimental group (P < 0.05). RT-PCR results showed that the mRNA expression of BMP-2 and OPG was significantly higher in each experimental group compared with the control group (P < 0.05). Western blotting showed that the Mg-Nd-Gd-Sr alloy extract significantly increased the protein expression of BMP-2 and OPG compared with the control group (P < 0.05).
CONCLUSIONS
Our data indicated that the novel Mg-Nd-Gd-Sr-Zn-Zr alloy had no obvious cytotoxic effects, and did not cause apoptosis to MC3T3-E1 cells; meanwhile it promoted cell adhesion, cell proliferation, mineralization, and ALP activity of osteoblasts. During this process, there was an increase in the expressions of BMP-2 and OPG mRNAs and proteins.
Topics: Alloys; Cell Line; Cell Adhesion; Osteoblasts; Cell Differentiation; Cell Proliferation
PubMed: 37405521
DOI: 10.1007/s11033-023-08637-5 -
Acta Biomaterialia Jun 2022Biodegradable metals (BM) and additive manufacturing (AM) are regarded revolutionary biomaterials and biofabrication technologies for bone repairing metal implants, the...
Biodegradable metals (BM) and additive manufacturing (AM) are regarded revolutionary biomaterials and biofabrication technologies for bone repairing metal implants, the combination of both, namely AM of BM, is thus expected to solve the dual technical difficulties including "conventional medical metals are biologically inert and exist in the human body permanently" and "conventional manufacturing processes are inadequate to fabricate personalized implants of complicated structure". This work additively manufactured biodegradable Zn-Mg alloy porous scaffolds by laser powder bed fusion (L-PBF). By using the pre-alloyed Zn-xMg (x = 1, 2 and 5 wt.%) powder and the optimized processing conditions, high fusion quality with the relative density greater than 99.5% was confirmed for the L-PBF parts. The influence of Mg content on microstructure, mechanical properties, in vitro corrosion, cytocompatibility, in vivo degradation, biocompatibility and osteogenic effect was investigated. Fine α-Zn grains and precipitation phases including MgZn and MgZn were observed in the Zn-xMg L-PBF parts. The hardness increased, and the strength increases firstly and then decreased with increasing the Mg content. The compressive strength and elastic modulus of Zn-1Mg porous scaffolds reached the highest as 40.9 ± 0.4 MPa and 1.17 ± 0.11 GPa, respectively, equivalent to those of cancellous bone. The corrosion rate and cell viability slightly rose with increasing the Mg content. Histological analysis after 6-week and 12-week implantation in rabbit femurs showed enhanced bone formation around the Zn-1Mg porous scaffolds compared with pure Zn counterparts. In summary, Zn-1Mg porous scaffolds produced by L-PBF presented promising results to fulfill customized requirements of biodegradable bone implants. STATEMENT OF SIGNIFICANCE: Additive manufacturing of biodegradable metal porous scaffolds is expected to solve the dual challenges from customized structures and bioactive function required for bone implants. It was the first to present a systematic in vitro and in vivo investigation into the compositions, microstructure, mechanical properties, biodegradation, biocompatibility and osteogenic effect of additively manufactured Zn-Mg alloy porous scaffolds. Reliable formation quality and performance evaluation was achieved by using the pre-alloyed Zn-xMg (x = 1, 2 and 5 wt.%) powder and the optimized laser powder bed fusion process. Although the Zn-1Mg scaffolds exhibited promising mechanical strength, biocompatibility, and osteogenic effect, their degradation rate needs to be further accelerated compared with the term of bone reconstruction.
Topics: Alloys; Animals; Metals; Osseointegration; Porosity; Powders; Rabbits; Zinc
PubMed: 35381400
DOI: 10.1016/j.actbio.2022.03.055 -
Biofouling Jan 2023This study aimed to characterize the immobilization of the novel JIChis-2 peptide on the Ti-6Al-4V alloy, widely used in the biomedical sector. The antimicrobial...
This study aimed to characterize the immobilization of the novel JIChis-2 peptide on the Ti-6Al-4V alloy, widely used in the biomedical sector. The antimicrobial activity of JIChis-2 was evaluated in the Gram-negative bacterium . Its immobilization occurred by inducing the formation of covalent bonds between the N-terminus of the peptides and the surface previously submitted to acrylic acid polymerization the PECVD technique. Coated and uncoated surfaces were characterized by FTIR, AFM, SEM and EDX. Studies of global and localized corrosion were carried out, seeking to explore the effects triggered by surface treatment in an aggressive environment. Additionally, the ability of the functionalized material to prevent biofilm formation evidenced that the strategy to immobilize JIChis-2 in the Ti-6Al-4V alloy PECVD of acrylic acid resulted in the development of a functional material with antibiofilm properties.
Topics: Materials Testing; Polymerization; Antimicrobial Peptides; Escherichia coli; Biofilms; Titanium; Alloys
PubMed: 36856008
DOI: 10.1080/08927014.2023.2183121 -
Acta Biomaterialia Jan 2022The existing adverse effects of copper in copper-containing intrauterine devices (Cu-IUDs) have raised concerns regarding their use. These adverse effects include burst...
The existing adverse effects of copper in copper-containing intrauterine devices (Cu-IUDs) have raised concerns regarding their use. These adverse effects include burst release of cupric ions (Cu) at the initial stage and an increasingly rough surface of the Cu-IUDs. In this study, we investigated the use of two copper alloys, Cu-38 Zn and H62 as the new upgrading or alternative material for IUDs. Their corrosive properties were studied in simulated uterine fluid (SUF) by using electrochemical methods, with pure Cu as a control. We studied the in vitro long-term corrosion behaviors in SUF, cytotoxicity to uterine cells (human endometrial epithelial cells and human endometrial stromal cells), in vivo biocompatibility and contraceptive efficacy of pure Cu, H62, and Cu-38 Zn. In the first month, the burst release rate of Cu in the Cu-38 Zn group was significantly lower than those in the pure Cu and H62 groups. The in vitro cytocompatibility Cu-38 Zn was better than that of pure Cu and H62. Moreover, Cu-38 Zn showed improved tissue biocompatibility in vivo experiments. Therefore, the contraceptive efficacy of the Cu-38 Zn is still maintained as high as the pure Cu while the adverse effects are significantly eased, suggesting that Cu-38 Zn can be a suitable potential candidate material for IUDs. STATEMENT OF SIGNIFICANCE: The existing adverse effects associated with the intrinsic properties of copper materials for copper-containing intrauterine devices (Cu-IUD) are of concern in their employment. Such as, burst release of cupric ions (Cu) at the initial stage and an increasingly rough surface of the Cu-IUD. In this work, Cu alloyed with a high amount of bioactive Zn was used for a Cu-IUD. The Cu-38 Zn alloy exhibited reduced burst release of Cu within the first month compared with the pure Cu and H62. Furthermore, the Cu-38 Zn alloy displayed significantly improved biocompatibility and a much smoother surface. Therefore, high antifertility efficacy of the Cu-38 Zn alloy was well maintained, while the adverse effects are significantly eased, suggesting that the Cu-38 Zn alloy is promising for a Cu-IUD.
Topics: Alloys; Copper; Corrosion; Feasibility Studies; Female; Humans; Intrauterine Devices, Copper; Zinc
PubMed: 34774783
DOI: 10.1016/j.actbio.2021.11.006 -
Sheng Wu Yi Xue Gong Cheng Xue Za Zhi =... Jun 2023Znic (Zn) alloys with good cytocompatibility and suitable degradation rate have been a kind of biodegradable metal with great potential for clinical applications. This...
Znic (Zn) alloys with good cytocompatibility and suitable degradation rate have been a kind of biodegradable metal with great potential for clinical applications. This paper summarizes the biological role of degradable Zn alloy as bone implant materials, discusses the mechanical properties of different Zn alloys and their advantages and disadvantages as bone implant materials, and analyzes the influence of different processing strategies (such as alloying and additive manufacturing) on the mechanical properties of Zn alloys. This paper provides systematic design approaches for biodegradable Zn alloys as bone implant materials in terms of the material selection, product processing, structural topology optimization, and assesses their application prospects with a view to better serve the clinic.
Topics: Orthopedics; Zinc; Alloys; Dental Materials; Prostheses and Implants
PubMed: 37380401
DOI: 10.7507/1001-5515.202204077 -
Biometals : An International Journal on... Dec 2022Galvanic replacement reaction was used in the synthesis of bimetallic gold-silver alloy nanoparticles (Au-Ag NPs), where pre-synthesized Ag...
Galvanic replacement reaction was used in the synthesis of bimetallic gold-silver alloy nanoparticles (Au-Ag NPs), where pre-synthesized Ag nanoparticles-polyvinylpyrrolidone (AgNPs-PVP) were used to reduce the aryldiazonium tetrachloroaurate(III) salt in water. TEM images and EDS elemental analysis showed the formation of spherical Au-Ag NPs with sizes of 12.8 ± 4.9 nm and 25.6 ± 14.4 nm for corresponding Au-Ag ratios and termed as AuAg and AuAg, respectively, with different concentrations of the gold precursor. The hydrodynamic sizes measured using dynamic light scattering are 46.4 nm and 74.8 nm with corresponding zeta potentials of - 44.56 and - 25.09 mV in water, for AuAg and AuAg respectively. Oxidative leachability of Ag ion studies from the starting AgNPs-PVP in 1 M NaCl showed a significant decrease in the plasmon peak after 8 h, indicating the complete dissolution of Ag ions, however, there is enhanced oxidation resistivity of Ag from Au-Ag NPs even after 24 h. Electrochemical studies on glassy carbon electrodes displayed a low oxidation peak in aqueous solutions of 20 mM KCl at 0.16 V and KNO at 0.33 V vs. saturated calomel electrode (SCE). We studied the antibacterial activity of Au-Ag alloy nanoparticles against gram-positive Staphylococcus aureus, Staphylococcus epidermidis, Enterococcus faecalis, and gram-negative Escherichia coli, Salmonella typhimurium, and Pseudomonas aeruginosa. Our findings demonstrated superior antibacterial activity of Au-Ag NPs compared with AgNPs-PVP. Moreover, the nanoparticles inhibited the S. epidermidis biofilm formation.
Topics: Silver; Gold; Metal Nanoparticles; Alloys; Gold Alloys; Anti-Bacterial Agents; Water
PubMed: 36149568
DOI: 10.1007/s10534-022-00446-w -
International Journal of Molecular... Jan 2023This study aimed to establish a surface modification technology for ZK60 magnesium alloy implants that can degrade uniformly over time and promote bone healing. It...
This study aimed to establish a surface modification technology for ZK60 magnesium alloy implants that can degrade uniformly over time and promote bone healing. It proposes a special micro-arc oxidation (MAO) treatment on ZK60 alloy that enables the composite electrolytes to create a coating with better corrosion resistance and solve the problems of uneven and excessive degradation. A magnesium alloy bone screw made in this way was able to promote the bone healing reaction after implantation in rabbits. Additionally, it was found that the MAO-treated samples could be sustained in simulated body-fluid solution, exhibiting excellent corrosion resistance and electrochemical stability. The Ca ions deposited in the MAO coating were not cytotoxic and were beneficial in enhancing bone healing after implantation.
Topics: Animals; Rabbits; Magnesium; Corrosion; Bone and Bones; Prostheses and Implants; Alloys; Coated Materials, Biocompatible
PubMed: 36675115
DOI: 10.3390/ijms24021602 -
Molecules (Basel, Switzerland) Jul 2019While the overwhelming number of papers on multi-principal-element alloys (MPEAs) focus on the mechanical and microstructural properties, there has been growing interest...
While the overwhelming number of papers on multi-principal-element alloys (MPEAs) focus on the mechanical and microstructural properties, there has been growing interest in these alloys as solid-state hydrogen stores. We report here the synthesis optimization, the physicochemical and the hydrogen sorption properties of TiVZrNb. This alloy was prepared by two methods, high temperature arc melting and ball milling under Ar, and crystallizes into a single-phase structure. This MPEA shows a single transition from the initial phase to a final dihydride and a maximum uptake of 1.7 H/ (2.5 wt%). Interestingly, the dihydride phase can be directly obtained by reactive ball milling under hydrogen pressure. The hydrogen desorption properties of the hydrides obtained by hydrogenation of the alloy prepared by arc melting or ball milling and by reactive ball milling have been compared. The best hydrogen sorption properties are shown by the material prepared by reactive ball milling. Despite a fading of the capacity for the first cycles, the reversible capacity of the latter material stabilizes around 2 wt%. To complement the experimental approach, a theoretical investigation combining a random distribution technique and first principle calculation was done to estimate the stability of the hydride.
Topics: Adsorption; Alloys; Crystallization; Hydrogen; Materials Testing; Nanostructures; Surface Properties; Vanadium
PubMed: 31370373
DOI: 10.3390/molecules24152799 -
PloS One 2022In this study, a comprehensive treatment process based on the rotary injection of Ar+CO2 Mg-Al alloy melt is proposed. The effect of carbon on the grain refinement of...
In this study, a comprehensive treatment process based on the rotary injection of Ar+CO2 Mg-Al alloy melt is proposed. The effect of carbon on the grain refinement of Mg-Al alloy is studied according to the proposed integrated treatment process. The regularity of carbon refinement in the Mg-Al alloy is examined by microstructural observation and theoretical calculation. The results show that carbon has no effect on the grain refinement of Mg-Al alloy when the Al content is less than 1wt.%. However, when the Al content reaches 2 wt.%, the refining effect is obvious, and the grain refinement efficiency is 62%. The refining effect increases with the increase in the Al content, and the refinement efficiency becomes 79% when the Al content reaches 9 wt.%. The size of Al-C-O in the matrix is approximately 5μm, which confirms the existence of Al4C3 phase exists as a heterogeneous nucleating agent. The theoretical calculations suggest that the Al4C3 heterogeneous nucleating agent cannot be formed when the Al content in the Mg alloy is less than 1.34%, so there is no thinning effect under such Al content. The crystallographic calculations reveal that the mismatch between the Al4C3 phase and Mg alloy matrix is only 4.05%, and Al4C3 can exist as a heterogeneous nucleating agent for α-Mg phase. Combining the measured solidification curves with the classical nucleation theory, the wetting angle of Mg-Al alloy on Al4C3 is calculated to be 24.3°.
Topics: Alloys; Carbon
PubMed: 35926058
DOI: 10.1371/journal.pone.0271583 -
Bio-medical Materials and Engineering 2022Magnesium (Mg) alloy have biodegradation and mechanical properties that are similar to those of human bone, making it a promising candidate material for inclusion in...
BACKGROUND
Magnesium (Mg) alloy have biodegradation and mechanical properties that are similar to those of human bone, making it a promising candidate material for inclusion in implantable medical devices.
OBJECTIVE
The osteointegration effect of Mg alloy scaffolds with different corrosion rates were studied and evaluated in large bone defect models.
METHOD
Mg-Sr and Mg-Ca alloy scaffolds with a 20-μm Micro-arc oxidation (MAO) coating were used to repair critical bone defects for subsequent assessment of each alloy's degradation and osteointegration by X-ray, Micro-CT, fluorescence and histological examination.
RESULTS
At 12 weeks post-implantation, each defect was found to be effectively reconstructed by either of the Mg alloys based on X-ray and Micro-CT images. The corrosion rate (CR) of each Mg alloy - as calculated based on micro-computed tomography information - demonstrated that the MAO coating could provide effective protection for only 4 weeks post-surgery. From weeks 8 to 12, the CR of the Mg-Ca alloy scaffold increased from 1.34 ± 0.23 mm/y to 1.57 ± 0.16 mm/y. In contrast, the CR of the Mg-Sr alloy scaffold decreased from 0.58 ± 0.14 mm/y to 0.54 ± 0.16 mm/y. However, fluorescence and histological examination revealed more mature, closely and regularly arranged newborn osteocytes at the Mg-Ca scaffold-fracture interface e from weeks 8 to 12 after surgery.
CONCLUSION
The Mg-Sr scaffold was more corrosion resistant and the Mg-Ca scaffold yielded a better overall repair, which indicates that the CR of magnesium alloys matches the rate of new bone formation and is the key to repair bone defects as a bone substitute.
Topics: Alloys; Coated Materials, Biocompatible; Corrosion; Humans; Magnesium; Osteocytes; Osteogenesis; X-Ray Microtomography
PubMed: 34744060
DOI: 10.3233/BME-211300