-
BMC Oral Health May 2024Alterations in the mechanical properties of the materials utilized in orthodontic appliances could affect the working properties of the appliances, thereby affecting... (Randomized Controlled Trial)
Randomized Controlled Trial Comparative Study
BACKGROUND
Alterations in the mechanical properties of the materials utilized in orthodontic appliances could affect the working properties of the appliances, thereby affecting clinical progress and outcome. Numerous studies have confirmed the correlation between alloy corrosion and raised surface roughness, which has a direct impact on the working characteristics of orthodontic archwires.
METHODS
Thirty nickel-titanium (NiTi) orthodontic archwires were utilized in this study. Patients were randomly selected and allocated into three groups according to the randomization plan; (The control group): subjects practiced regular oral hygiene; (The fluoride group): subjects used fluoride for intensive prophylaxis; (The chlorhexidine group): subjects used chlorhexidine. Representative samples were evaluated by SEM, and then SEM images with high resolution were examined using Image J software to determine the surface roughness and obtain the results for further statistical analysis.
RESULTS
Our findings indicated a significant difference was found between the three groups regarding the anterior and posterior parts between the control and the two other groups and a non-significant difference between NaF and CHX groups. Overall, the p-value for group comparisons was 0.000 for both parts, indicating a highly significant difference especially between the control and NaF groups.
CONCLUSION
Mouthwashes containing sodium fluoride demonstrated more significant surface alterations than the control and CHX groups and should be prescribed in accordance with orthodontic materials to reduce side effects.
Topics: Humans; Sodium Fluoride; Chlorhexidine; Corrosion; Surface Properties; Orthodontic Wires; Dental Alloys; Nickel; Alloys; Microscopy, Electron, Scanning; Titanium; Cariostatic Agents; Male; Female; Young Adult; Mouthwashes; Image Processing, Computer-Assisted; Adolescent; Adult; Oral Hygiene
PubMed: 38745154
DOI: 10.1186/s12903-024-04289-4 -
Journal of Breath Research May 2024Despite the widespread use of dental restorative materials, little information exists in the literature regarding their potential impact on bad breath. This in vitro...
Despite the widespread use of dental restorative materials, little information exists in the literature regarding their potential impact on bad breath. This in vitro study aims to fill this gap by investigating the influence of different restorative materials on the release of hydrogen sulfide (HS). Thirteen diverse dental restorative materials, including composites, flowable composites, glass ionomer restorative materials, high-copper amalgam, and CAD-CAM blocks, were examined. Cellulose Sponge models were used as negative and positive control. All samples were prepared with a diameter of 5 mm and a height of 2 mm. Except for the negative control group, all samples were embedded into Allium cepa L., and the emitted HS was measured using the Wintact W8802 hydrogen sulfide monitor. Surface roughness's effect on emission was explored by roughening the surfaces of CAD-CAM material samples, and gas emission was measured again. The data were statistically analyzed using the Kruskal-Wallis test and DSCF pairwise comparison tests. Fiber-reinforced flowable composite (EverX Flow), amalgam (Nova 70-caps), and certain composite materials (IPS Empress Direct, Tetric Evoceram, Admira Fusion X-tra) released higher HS concentrations compared to the negative control. The HS release period lasted longer in the same materials mentioned above, along with G-aenial Universal Injectable. Indirectly used materials, such as GC Cerasmart, Vita Enamic, and Vita YZ HT, demonstrated significantly lower emissions compared to other direct restoratives. Importantly, the surface roughness of indirect materials did not significantly affect peak HS concentrations or release times. The study reveals variations in HS release among restorative materials, suggesting potential advantages of indirect restorative materials in reducing HS-induced halitosis. This comprehensive understanding of the relationship between restorative materials and halitosis can empower both dental professionals and patients to make well-informed treatment choices. Notably, there is evidence supporting the enhanced performance of indirect restorative materials for individuals affected by halitosis.
Topics: Humans; Halitosis; Hydrogen Sulfide; Dental Materials; In Vitro Techniques; Dental Restoration, Permanent; Composite Resins; Materials Testing; Dental Amalgam; Surface Properties
PubMed: 38744271
DOI: 10.1088/1752-7163/ad4b57 -
Indian Journal of Dental Research :... Oct 2023To evaluate and compare the formation of dentinal defects using hand Hedstrom files, XP-Shaper, TruNatomy, and Reciproc Blue file systems when used for oval shaped root... (Comparative Study)
Comparative Study
AIM
To evaluate and compare the formation of dentinal defects using hand Hedstrom files, XP-Shaper, TruNatomy, and Reciproc Blue file systems when used for oval shaped root canals.
MATERIALS AND METHODS
One hundred and five extracted human mandibular premolars with single root and oval canals were selected for the study. Twenty-one teeth were unprepared (control), and the remaining teeth were divided into the prepared groups (n = 21), that is, Group H-Files, Group XP-Shaper, Group TruNatomy, and Group Reciproc Blue. All selected teeth were de-coronated perpendicular to the long axis of the tooth by using a diamond-coated disk with water cooling, leaving root segments approximately 16 mm in length. Each group was prepared according to the above file system. Then all roots were sectioned perpendicular to their long axes at 3, 6, and 9 mm from the apex using a diamond-coated disk under a continuous water stream. Each specimen was then checked for the presence of dentinal defects/microcracks.
RESULT
The XP-Endo shaper group had the lowest number of defects (01/21 roots) 4.7%; TN (04/21) 19%, H-Files (04/21) 19%, and RC Blue (05/21) 23.8% had the highest incidence of defects. However, no significant difference was detected among these groups (P > 0.05).
CONCLUSION
The motor-driven root canal instrumentation with rotary and reciprocating files and hand files may create microcracks in the radicular dentine, whereas the XP-Shaper file system produces minimal or less cracks compared to other tested rotary file systems and H-file instrumentation.
Topics: Humans; Root Canal Preparation; Dentin; Dental Pulp Cavity; Equipment Design; Dental Instruments; Bicuspid; Dental Alloys; Nickel; Titanium; Materials Testing; Rotation
PubMed: 38739827
DOI: 10.4103/ijdr.ijdr_132_23 -
Cureus Apr 2024The evolution of root canal instrumentation techniques has significantly impacted the field of endodontics, enhancing both the efficiency and outcomes of treatments.... (Review)
Review
The evolution of root canal instrumentation techniques has significantly impacted the field of endodontics, enhancing both the efficiency and outcomes of treatments. This review outlines the transition from manual to mechanical and rotary instruments, highlighting the role of nickel-titanium (NiTi) alloys and smart technologies in advancing procedural precision and reducing patient discomfort. Key historical developments and technological innovations, such as digital imaging and navigation systems, are explored for their contributions to improved clinical outcomes and patient satisfaction. Additionally, the review addresses the challenges presented by the complex anatomy of the root canal system and the advent of current instrumentation techniques. The potential of emerging trends, including artificial intelligence and advances in materials science, is discussed in the context of future endodontic practices. Despite the progress, challenges related to using advanced instrumentation methods, ethical considerations, and the cost factor of new technologies persist. The present review underscores the ongoing need for research and development to further refine root canal instrumentation techniques, ensuring that advancements in endodontic care remain patient-centered and accessible.
PubMed: 38738101
DOI: 10.7759/cureus.58045 -
Polymers Apr 2024The goal of the study was to compare the surface characteristics of typical implant materials used in orthopedic surgery and traumatology, as these determine their...
The goal of the study was to compare the surface characteristics of typical implant materials used in orthopedic surgery and traumatology, as these determine their successful biointegration. The morphological and chemical structure of Vortex plate anodized titanium from commercially pure (CP) Grade 2 Titanium (Ti2) is generally used in the following; non-cemented total hip replacement (THR) stem and cup Ti alloy (Ti6Al4V) with titanium plasma spray (TPS) coating; cemented THR stem Stainless steel (SS); total knee replacement (TKR) femoral component CoCrMo alloy (CoCr); cemented acetabular component from highly cross-linked ultrahigh molecular weight polyethylene (HXL); and cementless acetabular liner from ultrahigh molecular weight polyethylene (UHMWPE) (Sanatmetal, Ltd., Eger, Hungary) discs, all of which were examined. Visualization and elemental analysis were carried out by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). Surface roughness was determined by atomic force microscopy (AFM) and profilometry. TPS Ti presented the highest R value (25 ± 2 μm), followed by CoCr (535 ± 19 nm), Ti2 (227 ± 15 nm) and SS (170 ± 11 nm). The roughness measured in the HXL and UHMWPE surfaces was in the same range, 147 ± 13 nm and 144 ± 15 nm, respectively. EDS confirmed typical elements regarding the investigated prosthesis materials. XPS results supported the EDS results and revealed a high % of Ti on Ti2 and TPS surfaces. The results indicate that the surfaces of prosthesis materials have significantly different features, and a detailed characterization is needed to successfully apply them in orthopedic surgery and traumatology.
PubMed: 38732662
DOI: 10.3390/polym16091193 -
BMC Oral Health May 2024Releasing of metal ions might implicate in allergic reaction as a negative subsequent of the corrosion of Stainless Steel (SS304) orthodontic wires. The aim of this...
BACKGROUND
Releasing of metal ions might implicate in allergic reaction as a negative subsequent of the corrosion of Stainless Steel (SS304) orthodontic wires. The aim of this study was to evaluate the corrosion resistance of zinc-coated (Zn-coated) SS orthodontic wires.
METHODS
Zinc coating was applied on SS wires by PVD method. Electrochemical impedance spectroscopy (EIS), Potentiodynamic polarization tests and Tafel analysis methods were used to predict the corrosion behavior of Zn-coated and uncoated SS wires in both neutral and acidic environments.
RESULTS
The values of E ,i and Rwhich were the electrochemical corrosion characteristics, reported better corrosion behavior of Zn-coated SS wires against uncoated ones in both artificial saliva and fluoride-containing environments. Experimental results of the Tafel plot analyses were consistent with that of electrochemical impedance spectroscopy analyses for both biological solutions.
CONCLUSION
Applying Zn coating on bare SS orthodontic wire by PVD method might increase the corrosion resistance of the underlying stainless-steel substrate.
Topics: Corrosion; Stainless Steel; Orthodontic Wires; Zinc; Dielectric Spectroscopy; Saliva, Artificial; Materials Testing; Dental Alloys; Coated Materials, Biocompatible; Fluorides; Hydrogen-Ion Concentration; Humans; Surface Properties; Potentiometry
PubMed: 38725023
DOI: 10.1186/s12903-024-04242-5 -
Nederlands Tijdschrift Voor... May 2024A 56-year-old woman presented with persistent unilateral gnathological complaints after replacing an amalgam restoration. The patient reported tension and pain in the...
A 56-year-old woman presented with persistent unilateral gnathological complaints after replacing an amalgam restoration. The patient reported tension and pain in the right side of her jaw, along with crackling sounds in the temporomandibular joint. Physical examination revealed tenderness in the right masseter muscle and temporomandibular joint, as well as anterior disc replacement with reduction on both sides. The initial treatment focused on providing rest to the temporomandibular joint, the Yoda exercise, and later, wet-needling. Despite initially limited improvement, the symptoms persisted. This case underscores the complexity and various treatment options for temporomandibular joint issues following dental procedures.
Topics: Humans; Female; Middle Aged; Temporomandibular Joint Disorders; Dental Amalgam; Treatment Outcome; Dental Restoration, Permanent
PubMed: 38715536
DOI: 10.5177/ntvt.2024.05.23106 -
Odontology May 2024The aim of this research was to determine if there are differences in early bacterial adhesion among CAD/CAM dental materials after 24 h exposure in the oral...
The aim of this research was to determine if there are differences in early bacterial adhesion among CAD/CAM dental materials after 24 h exposure in the oral environment. One hundred twenty specimens were prepared according to the manufacturer's recommendations and divided into six groups: RBC (resin-based composite), PMMA (polymethyl methacrylate), PEEK (polyether ether ketone), ZP (zirconia polished), ZG (zirconia glazed), and cobalt-chromium alloy (CoCr alloy). Twenty healthy participants were instructed to carry an intraoral device with six specimens, one per group, for 24 h. Thereafter, real-time polymerase chain reaction (qPCR) and scanning electron microscopy (SEM) analyses enabled quantification and 2D view of biofilm formed on the specimens' surfaces. Kruskal-Wallis test and Dunn's post hoc analysis were used for inter-group comparison and data were presented as median (minimum-maximum). RBC specimens accumulated less bacteria, in comparison with ZG (p = 0.017) and PEEK specimens (p = 0.030), that dominated with the highest amount of adhered bacterial biofilm. PMMA, CoCr, and ZP specimens adhered more bacteria than RBC (p > 0.05), and less than ZG (p > 0.05) and PEEK (p > 0.05). The bacterial number varied considerably among participants. The obtained results enable a closer view into the susceptibility of CAD/CAM materials to microorganisms during the presence in the oral environment, which can be beneficial for a proper selection of these materials for a variety of dental restorations.
PubMed: 38705962
DOI: 10.1007/s10266-024-00944-y -
Clinical Oral Investigations May 2024To assess the long-term clinical performance of ceramic in-/onlays (CIOs) and cast gold partial crowns (CGPCs) in posterior teeth in terms of success, survival,...
OBJECTIVES
To assess the long-term clinical performance of ceramic in-/onlays (CIOs) and cast gold partial crowns (CGPCs) in posterior teeth in terms of success, survival, complications (biological, technical) and quality.
MATERIAL AND METHODS
In a retrospective study, a total of 325 patients were recorded after up to 24.8 years (mean 13.9 ± 3.8 years) having (pre-)molars restored with CIO (Empress I, Ivoclar Vivadent, n = 161) and CGPC (Degunorm, DeguDent, n = 164) by supervised undergraduate students. A total of 296 restorations were assessed clinically and radiologically in healthy and endodontically treated teeth using modified United States Public Health Service (USPHS) criteria. Cumulative success and survival rates of the restorations were calculated using Kaplan-Meier estimates. Biological and technical complications were recorded. Status of oral health comprising caries risk and localized periodontitis were assessed.
RESULTS
The cumulative success rates of CIOs were 92.1% and of CGPCs 84.2% after mean service times of 14.5 years. The annual failure rates of total service times were 0.5% in teeth restored with CIO (n = 155) and 0.7% in teeth restored with CGPC (n = 163). The cumulative survival rates of CIOs were 93.9% after a mean service time of 15.2 years and decreased to 91.7% after 23.5 years. The cumulative survival rates of CGPCs were 92.6% after a mean service time of 14.9 years and 91.8% after 23.5 years. Complications in CIOs (n = 149) were ceramic fracture (6.7%), secondary caries (4.7%), endodontic complication (2.7%) and tooth fracture (1.3%) compared to CGPCs (n = 147) with endodontic complication (8.8%), secondary caries (4.8%) and decementation (2.0%). Endodontically treated teeth restored with CIO or CGPC revealed significantly less often success compared with corresponding vital teeth (p = .02). CIOs and CGPCs revealed clinically and radiographically good and excellent qualities with 71.8% (107/149) and 68% (100/147) without any significant differences regarding type of restoration.
CONCLUSIONS
Both CIOs and CGPCs achieved high survival rates up to 24.8 years when performed by supervised undergraduate students. The longevity of the restorations may benefit from the intraoral repair of accessible defects and, in case of pulp infection or necrosis, an adequate endodontic management.
CLINICAL RELEVANCE
CIOs and CGPCs made by supervised undergraduate students are proper restoration types in posterior teeth in the long-term. An adequate preparation design, meticulous care in the inserting technique and constant biofilm removal due to proper oral hygiene combined with professional maintenance care are substantial. The clinical long-term performance was mostly limited by ceramic fractures in CIOs and endodontic complications in CGPCs.
Topics: Humans; Retrospective Studies; Crowns; Dental Restoration Failure; Female; Male; Adult; Inlays; Ceramics; Gold Alloys; Dental Caries; Dental Porcelain; Middle Aged; Dental Prosthesis Design; Tooth, Nonvital; Treatment Outcome
PubMed: 38702521
DOI: 10.1007/s00784-024-05682-7 -
Alternative Therapies in Health and... May 2024To investigate the impact of the restoration of non-bracket invisible orthodontic titanium alloy implant on individuals with dental malocclusion and arch deficiency...
The Impact of the Restoration of Invisible Orthodontic Titanium Alloy Implant Without Bracket on Individuals Afflicted with Dental Malocclusion and Arch Deficiency Accompanied by Periodontitis and a Local Periodontal Inflammation.
OBJECTIVE
To investigate the impact of the restoration of non-bracket invisible orthodontic titanium alloy implant on individuals with dental malocclusion and arch deficiency accompanied by periodontitis and local periodontal Inflammation.
METHOD
A cohort of 120 patients presenting with dental malocclusion and defects compounded by periodontitis, were treated at our institution between January 2021 and January 2022; these patients were enrolled in a randomized controlled trial.. These patients were allocated into two groups. The control group (comprising 60 cases) underwent titanium alloy implant restoration, while the research group (also with 60 cases) received titanium alloy implant restoration following invisible orthodontic treatment without brackets. A one-year post-treatment follow-up was conducted, during which various parameters, including pain levels, aesthetic improvement, inflammatory response, dental function, oral hygiene, and the incidence of adverse events, were evaluated and compared before and after treatment between the two groups.
RESULTS
After six months of treatment, the visual analog scale (VAS) in the study group was lower than that in the control group (P < .05). After 6 months of treatment, the research team observed the changes in gingival crevicular interleukin-6 (IL-6), tumor necrosis factor-α (TNF-α), Interleuckin-1 (IL-1), plaque index (PLI), and soft dirt index (DI) were all lower than those in the control group (P < .05). After 6 months of treatment, the research group had higher scores for tooth functions such as chewing, swallowing, speech expression, and occlusion than the control group, as well as higher pink and white aesthetics indexes (P < .05). The difference in the incidence rate of adverse outcomes between the research and control group was not distinct (P > .05).
CONCLUSION
In case of dental malocclusion accompanied by periodontal disease, the utilization of titanium implants for rectifying dental arch deformities without the use of orthodontic brackets, devoid of orthodontic brackets, has demonstrated notable efficacy in alleviating patients' periodontal discomfort, their oral hygiene, and dental functionality. This modality is conducive to augmenting dental aesthetics without incurring heightened rates of unfavorable consequences, thereby enhancing treatment outcomes.
PubMed: 38702170
DOI: No ID Found