-
Ecotoxicology and Environmental Safety Jun 2024The contamination of arsenic (As) in aqueous environments has drawn widespread attention, and iron compounds may largely alter the migration ability of As. However, the...
The contamination of arsenic (As) in aqueous environments has drawn widespread attention, and iron compounds may largely alter the migration ability of As. However, the stability of As(III) in Fe-As system with the intervention of organic matter (OM) remains unclear. Herein, we had explored the co-precipitation and co-oxidation processes of As-Fe system by using batch experiments combined with Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS) in this research. The precipitation quantity of As(III) increased (28.85-92.41 %) when the As/Fe ratio decreased, and increased (24.20-64.20 %) with pH increased. The main active substance for oxidizing As(III) was HO, which was produced in the As-Fe system. FTIR and XPS revealed that As(III) was first oxidized in neutral, and then absorbed and enteredthe interior of Fe(OH) colloids. But under alkaline conditions, As(III) was adsorbed by Fe (Oxyhydr) oxides firstly, and then oxidized. The intervention of OM would inhibit the redistribution process of As(III) in aqueous environments. Functional groups and unsaturation of the carbon chain were the dominant factors that affected the precipitation and oxidation processes of As(III), respectively. Co-existing ions (especially PO) also signally affected the precipitation quantity of As(Ⅲ) in the system and, when coexisting with OM, could exacerbate this process. The influence of co-existing ions on the redistributive process of As(III) in the As-Fe system with/without OM were as follows: PO > SO > mixed ions > SiO. Moreover, high concentration of OM and PO might lead to morphological alterations of As, acting as a threat to aqueous environments. In summary, the present findings were to further understand and appreciate the changes of As toxicity in the aqueous environments. Particularly, the coexistence of OM and As can potentially increase the risk to drinking water safety.
PubMed: 38941658
DOI: 10.1016/j.ecoenv.2024.116631 -
ACS Nano Jun 2024Layered membranes assembled from two-dimensional (2D) building blocks such as graphene oxide (GO) are of significant interest in desalination and osmotic power...
Layered membranes assembled from two-dimensional (2D) building blocks such as graphene oxide (GO) are of significant interest in desalination and osmotic power generation because of their ability to selectively transport ions through interconnected 2D nanochannels between stacked layers. However, architectural defects in the final assembled membranes (e.g., wrinkles, voids, and folded layers), which are hard to avoid due to mechanical compliant issues of the sheets during the membrane assembly, disrupt the ionic channel pathways and degrade the stacking geometry of the sheets. This leads to degraded ionic transport performance and the overall structural integrity. In this study, we demonstrate that introducing in-plane nanopores on GO sheets is an effective way to suppress the formation of such architectural imperfections, leading to a more homogeneous membrane. Stacking of porous GO sheets becomes significantly more compact, as the presence of nanopores makes the sheets mechanically softer and more compliant. The resulting membranes exhibit ideal lamellar microstructures with well-aligned and uniform nanochannel pathways. The well-defined nanochannels afford excellent ionic conductivity with an effective transport pathway, resulting in fast, selective ion transport. When applied as a nanofluidic membrane in an osmotic power generation system, the holey GO membrane exhibits higher osmotic power density (13.15 W m) and conversion efficiency (46.6%) than the pristine GO membrane under a KCl concentration gradient of 1000-fold.
PubMed: 38941515
DOI: 10.1021/acsnano.4c04493 -
Langmuir : the ACS Journal of Surfaces... Jun 2024Metal oxides can activate peroxymonosulfate (PMS) for the catalytic degradation of organic dyes. However, achieving high catalytic efficiency, structural stability, ease...
Metal oxides can activate peroxymonosulfate (PMS) for the catalytic degradation of organic dyes. However, achieving high catalytic efficiency, structural stability, ease of recovery, and recyclability remains challenging for both research and practical applications. To address these requirements, a bimetallic oxide, CuMnO, was synthesized using a simple hydrothermal approach and was encapsulated to create hydrogel beads, CS-Ca@PEI/CuMnO. Subsequently, CS-Ca@PEI/CuMnO was used to activate PMS and establish a solid-liquid heterogeneous oxidation system (CS-Ca@PEI/CuMnO/PMS) for the degradation of Congo red (CR). The effects of various parameters such as different systems, catalyst dosages, initial pH values, PMS concentrations, temperatures, and anion types on the catalytic degradation properties of CS-Ca@PEI/CuMnO for CR were systematically evaluated. The results indicated that CS-Ca@PEI/CuMnO has exceptional degradation capacity, achieving 91.0% degradation of CR at pH 7. After three degradation cycles, the catalyst maintained an 86.9% degradation efficiency compared to its original performance, highlighting its robust structural stability. The presence of reactive radicals, specifically O and O, were confirmed through quenching experiments, X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance spectroscopy (EPR). Liquid chromatography-tandem mass spectrometry (LC-MS) revealed ten proposed intermediates in the catalytic degradation process. Due to its exceptional catalytic performance, structural durability, recyclability, and ease of retrieval, the catalyst shows great potential for effectively removing organic pollutants from industrial wastewater.
PubMed: 38941474
DOI: 10.1021/acs.langmuir.4c00659 -
Chemistry & Biodiversity Jun 2024Delayed healing of chronic wounds results in amputation and mortality rates in serious cases. The present study examines the merged wound-restorative efficacy of...
Delayed healing of chronic wounds results in amputation and mortality rates in serious cases. The present study examines the merged wound-restorative efficacy of injectable bone marrow-derived mesenchymal stem cells (BMMSCs) and topical Callyspongia sp. extract in immunocompromised rats. HR-LC-MS analysis of Callyspongia sp. extract tentatively identified twenty-nine compounds (1-29) and highlighted its richness in fatty acids and terpenoids, known for their wound regenerating efficacies. The wound closure was greatly prominent in the BMMSCs/Callyspongia sp. group in contrast to the control group (p < 0.001). The RT-PCR gene expression emphasized these results by attenuating the oxidative, inflammatory, and immunity markers, further confirmed by histopathological findings. Additionally, in silico modeling was particularly targeting matrix metalloproteinase-9 (MMP9), a key player in wound healing processes. Computational analysis revealed that compounds 18 and 19 potentially modulate MMP9 activity. The combination of BMMSCs and topical Callyspongia sp. extract holds a promise for regenerative therapy constituting a drastic advance in the wound cure of immunocompromised patients, eventually further safety assessments and clinical trials are required.
PubMed: 38941178
DOI: 10.1002/cbdv.202400682 -
Protoplasma Jun 2024Salt-induced stress poses a significant barrier to agricultural productivity by impeding crop growth. Presently, environmentalists are dedicated to safeguarding food...
Salt-induced stress poses a significant barrier to agricultural productivity by impeding crop growth. Presently, environmentalists are dedicated to safeguarding food security by enhancing agricultural yields in challenging environments. Biostimulants play a crucial role in mitigating abiotic stresses in crop production, and among these, plant essential oils (EOs) stand out as organic substances with diverse biological effects on living organisms. Among the natural promoters of plant growth, Rosmarinus officinalis L. essential oil (RoEO) has gained considerable attention. Although the manifold effects of essential oils (EOs) on plant growth have been extensively demonstrated, their impact on salt stress tolerance in durum wheat seedlings remains unexplored. This investigation was undertaken to evaluate the biostimulatory capabilities of RoEO on the durum wheat cultivar "Mahmoudi." The effects of three RoEO concentrations (1, 2.5, and 5 ppm) on seed germination, growth establishment, and the induction of salt resistance under salinity conditions (150 mM NaCl) were tested. At 5 ppm, RoEO enhanced seedlings' tolerance to salinity by improving growth and reducing membrane deterioration and oxidative stress-induced damage. The expression profile analyses of seven stress-related genes (TdNHX1, TdSOS1, TdSOD, TdCAT, TdGA20-ox1, TdNRT2.1, and TdGS) using RT-qPCR showed enhancement of several important genes in durum wheat seedlings treated with 5 ppm RoEO, even under control conditions, which may be related to salt stress tolerance. The results indicate that the application of RoEO suggests a possible alternative strategy to increase salt tolerance in durum wheat seedlings towards better growth quality, thus increasing ROS scavenging and activation of antioxidant defense.
PubMed: 38940918
DOI: 10.1007/s00709-024-01965-8 -
Applied and Environmental Microbiology Jun 2024Biological valorization of lignin, the second most abundant biopolymer on Earth, is an indispensable sector to build a circular economy and net-zero future. However,...
Biological valorization of lignin, the second most abundant biopolymer on Earth, is an indispensable sector to build a circular economy and net-zero future. However, lignin is recalcitrant to bioupcycling, demanding innovative solutions. We report here the biological valorization of lignin-derived aromatic carbon to value-added chemicals without requesting extra organic carbon and freshwater via reprogramming the marine clade bacterium . We discovered the unusual advantages of this strain for the oxidation of lignin monomers and implemented a CRISPR interference (CRISPRi) system with the -P inducible module, nuclease-deactivated Cas9, and programmable gRNAs. This is the first CRISPR-based regulatory system in , enabling precise and efficient repression of genes of interest. By deploying the customized CRISPRi, we reprogrammed the carbon flux from a lignin monomer, 4-hydroxybenzoate, to achieve the maximum production of protocatechuate, a pharmaceutical compound with antibacterial, antioxidant, and anticancer properties, with minimal carbon to maintain cell growth and drive biocatalysis. As a result, we achieved a 4.89-fold increase in protocatechuate yield with a dual-targeting CRISPRi system, and the system was demonstrated with real seawater. Our work underscores the power of CRISPRi in exploiting novel microbial chassis and will accelerate the development of marine synthetic biology. Meanwhile, the introduction of a new-to-the-field lineage of marine bacteria unveils the potential of blue biotechnology leveraging resources from the ocean.IMPORTANCEOne often overlooked sector in carbon-conservative biotechnology is the water resource that sustains these enabling technologies. Similar to the "food-versus-fuel" debate, the competition of freshwater between human demands and bioproduction is another controversial issue, especially under global water scarcity. Here, we bring a new-to-the-field lineage of marine bacteria with unusual advantages to the stage of engineering biology for simultaneous carbon and water conservation. We report the valorization of lignin monomers to pharmaceutical compounds without requesting extra organic substrate (e.g., glucose) or freshwater by reprogramming the marine bacterium with a multiplex CRISPR interference system. Beyond the blue lignin valorization, we present a proof-of-principle of leveraging marine bacteria and engineering biology for a sustainable future.
PubMed: 38940564
DOI: 10.1128/aem.00890-24 -
ACS Biomaterials Science & Engineering Jun 2024External factors often lead to predictable damage, such as chemical injuries, burns, incisions, and wounds. Bacterial resistance to antibiotics at wound sites...
External factors often lead to predictable damage, such as chemical injuries, burns, incisions, and wounds. Bacterial resistance to antibiotics at wound sites underscores the importance of developing hydrogel composite systems with inorganic nanoparticles possessing antibacterial properties to treat infected wounds and expedite the skin regeneration process. In this study, a promising TiO-HAp@PF-127@CBM inorganic and organic integrated hydrogel system was designed to address challenges associated with bacterial resistance and wound healing. The synthesized TiO-hydroxyapatite (HAp) nanocomposites were coated with an FDA-approved PluronicF-127 polymer and combined with a carbomer hydrogel (CBM) to accomplish the final product. The synthesized nanoparticles exhibit enhanced biocompatibility against L929 and HUVECs and cell proliferation effects. To mitigate oxidative stress caused by TiO-induced reactive oxygen species in dark environments for effective antibacterial effects, HAp promotes cell proliferation, expediting wound skin layer formation. CBM binds to inorganic nanoparticles, facilitating their gradual release and promoting wound healing. The reduced inflammation and enhanced tissue regeneration observed in the TiO-HAp@PF-127@CBM group suggest a favorable environment for wound repair. These results align with prior findings highlighting the biocompatibility and wound-healing properties of titanium-HAp-based materials. The ability of the TiO-HAp@PF-127@CBM hydrogel dressing to promote granulation tissue formation and facilitate epidermal regeneration underscores its potential for promoting antibacterial effects and wound healing applications.
PubMed: 38940279
DOI: 10.1021/acsbiomaterials.4c00277 -
Environmental Science & Technology Jun 2024Significant progress has been made previously in the research and development of graphene oxide (GO) membranes for water purification, but their biofouling behavior...
Significant progress has been made previously in the research and development of graphene oxide (GO) membranes for water purification, but their biofouling behavior remains poorly understood. In this study, we investigated the biofilm formation and biofouling of GO membranes with different surface microstructures in the context of filtering natural surface water and for an extended operation period (110 days). The results showed that the relatively hydrophilic and smooth Fe(OH)/GO membrane shaped a thin and spatially heterogeneous biofilm with high stable flux. However, the ability to simultaneously mitigate biofilm formation and reduce biofouling was not observed in the weakly hydrophilic and wrinkled Fe/GO and H-Fe(OH)/GO membranes. Microbial analyses revealed that the hydrophilicity and roughness distinguished the bacterial communities and metabolic functions. The organic matter-degrading and predatory bacteria were more adapted to hydrophilic and smooth GO surfaces. These functional taxa were involved in the degradation of extracellular polymeric substances (EPS), and improved biofilm heterogeneity. In contrast, the weakly hydrophilic and wrinkled GO surfaces had reduced biodiversity, while unexpectedly boosting the proliferation of EPS-secreting bacteria, resulting in increased biofilm formation and aggravated biofouling. Moreover, all GO membranes achieved sustainable water purification during the entire operating period.
PubMed: 38939969
DOI: 10.1021/acs.est.4c03363 -
Frontiers in Bioscience (Elite Edition) May 2024The utilization of various agrochemicals in crop production technology leads to soil health and fertility depletion. Multiple measures have been taken to revitalize the... (Review)
Review
The utilization of various agrochemicals in crop production technology leads to soil health and fertility depletion. Multiple measures have been taken to revitalize the health of polluted soil. In this context, organic agriculture has increased over the past few years to overcome the detrimental effects of extensive modern agricultural practices. Several traditional organic formulations, such as panchagavya, jeevamurtha, beejamurtha, bokashi, etc., are vital in converting polluted farmlands into organic. Various countries have their own organic formulations to improve crop growth and yield. These formulations are rich sources of many macro and micronutrients, growth-promoting phytohormones, and provide resistance against biotic and abiotic stresses. Apart from these benefits, these formulations consist of several groups of beneficial microorganisms that belong to the phyla , , , and , while some of the novel groups of microorganisms were also reported from the ingredients used in the preparation of these organic formulations. These microorganisms can solubilize nutrients such as phosphorous and zinc, oxidize sulfur, reduce nitrate, and are also involved in the production of indole acetic acid, ethylene reduction enzyme (1-aminocyclopropane-1-carboxylic acid deaminase), and organic acids that promote plant growth and induce resistance in the plant system. Hence, the utilization of traditional organic formulations helps in the reclamation of environmental health without compromising crop yields. This review describes the importance of organic farming, the preparation and application of different types of traditional organic formulations in different countries, and the microbial composition and mechanism of growth promotion of different traditional organic formulations.
Topics: Crops, Agricultural; Organic Agriculture; Soil Microbiology
PubMed: 38939912
DOI: 10.31083/j.fbe1602014 -
Chemical Science Jun 2024Highly efficient degradation of antibiotics is a huge challenge due to the extremely stable molecules and the potential for biological resistance. However, conventional...
Highly efficient degradation of antibiotics is a huge challenge due to the extremely stable molecules and the potential for biological resistance. However, conventional degradation methods are limited to lower degradation rate, higher energy consumption and secondary pollution. Herein, we report a new Cu-based metal-organic framework (MOF), featuring classical planar trinuclear [Cu(µ-O)] clusters within the pores. The presence of the rich open metal sites and the large pore ratio, as well as the high catalytic activity of Cu ions, are conducive to boosting the degradation of various antibiotics (>95%) under the activation of peroxymonosulfate. Remarkably, this is the first MOF to achieve such exceptional catalytic performance under neutral and even alkaline conditions, which exceeds those of most reported materials. Mechanism investigation demonstrates that multiple active species were produced and promoted the degradation synergistically during the advanced oxidation processes.
PubMed: 38939145
DOI: 10.1039/d4sc02850c