-
Chemosphere Jun 2024Plastic pollution in aquatic ecosystems is increasing and plastic particles may adsorb and transport a diverse array of contaminants, thereby increasing their...
Plastic pollution in aquatic ecosystems is increasing and plastic particles may adsorb and transport a diverse array of contaminants, thereby increasing their bioavailability to biota. This investigation aimed to evaluate the effects of varying polyethylene microplastics (PE MPs) and naphthalene (NAPH) concentrations on the survival and feeding rates of the model organism, Artemia salina, as well as NAPH adsorption to microplastics at different salinity levels (17, 75, 35.5 and 52.75 g L) under selected climate change scenarios. Survival (48 h) and feeding rates (6 h) of A. salina were also monitored, revealing that the presence of higher PE and NAPH concentrations lead to decreased survival rates while also increasing the number and size of microplastic particles in the saline solutions. Higher PE concentrations negatively affected A. salina feeding rates and NAPH concentrations were positively correlated with particle number and size, as well as with NAPH and PE adsorption rates in solution. Our findings demonstrate that the co-occurrence of microplastics and NAPH in aquatic environments can result in detrimental zooplankton survival and feeding rate effects. Furthermore, this interaction may contribute to the accumulation of these contaminants in the environment, highlighting the need to simultaneously monitor and mitigate the presence of microplastics and organic pollutants, like NAPH, in aquatic environments.
PubMed: 38945219
DOI: 10.1016/j.chemosphere.2024.142718 -
Journal of Hazardous Materials Jun 2024Biodegradation of polyethylene (PE) plastics is environmentally friendly. To obtain the laccases that can efficiently degrade PE plastics, we generated 9 ancestral...
Biodegradation of polyethylene (PE) plastics is environmentally friendly. To obtain the laccases that can efficiently degrade PE plastics, we generated 9 ancestral laccases from 23 bacterial three-domain laccases through ancestral sequence reconstruction. The optimal temperatures of the ancestral laccases were between 60 °C-80 °C, while their optimal pHs were at 3.0 or 4.0. Without substrate pretreatment and mediator addition, all the ancestral laccases can degrade low-density polyethylene (LDPE) films at pH 7.0 and 60 °C. Among them, Anc52, which shared low sequence identity (18 %-41.7 %) with the reported PE-degrading laccases, was the most effective for LDPE degradation. After the catalytic reactions at 90 °C for 14 h, Anc52 (0.2 mg/mL) induced clear wrinkles and deep pits on the PE film surface detected by scanning electron microscope, and its carbonyl and hydroxyl indices reached 2.08 and 2.42, respectively. Then, we identified the residues 203 and 288 critical for PE degradation through site-directed mutation on Anc52. Moreover, Anc52 be activated by heat treatment (60 °C and 90 °C) at pH 7.0, which gave it a high catalytic efficiency (k/K= 191.73 mM·s) and thermal stability (half-life at 70 °C = 13.70 h). The ancestral laccases obtained here could be good candidates for PE biodegradation.
PubMed: 38944993
DOI: 10.1016/j.jhazmat.2024.135012 -
Enzyme and Microbial Technology Jun 2024Enzymatic depolymerization of PET waste emerges as a crucial and sustainable solution for combating environmental pollution. Over the past decade, PET hydrolytic...
Enzymatic depolymerization of PET waste emerges as a crucial and sustainable solution for combating environmental pollution. Over the past decade, PET hydrolytic enzymes, such as PETase from Ideonella sakaiensis (IsPETases), leaf compost cutinases (LCC), and lipases, have been subjected to rational mutation to enhance their enzymatic properties. ICCM, one of the best LCC mutants, was selected for overexpression in Escherichia coli BL21(DE3) for in vitro PET degradation. However, overexpressing ICCM presents challenges due to its low productivity. A new stress-inducible T7RNA polymerase-regulating E. coli strain, ASIA, which significantly enhances ICCM production by 72.8 % and achieves higher enzyme solubility than other strains. The optimal cultural condition at 30 °C with high agitation, corresponding to high dissolved oxygen levels, has brought the maximum productivity of ICCM and high PET-hydrolytic activity. The most effective PET biodegradation using crude or pure ICCM occurred at pH 10 and 60 °C. Moreover, ICCM exhibited remarkable thermostability, retaining 60 % activity after a 5-day reaction at 60 °C. Notably, crude ICCM eliminates the need for purification and efficiently degrades PET films.
PubMed: 38944965
DOI: 10.1016/j.enzmictec.2024.110476 -
Journal of Shoulder and Elbow Surgery Jun 2024The primary objective of this study was to evaluate and compare the incidence of complications and revision surgeries between in two of convertible metal-back glenoid...
BACKGROUND
The primary objective of this study was to evaluate and compare the incidence of complications and revision surgeries between in two of convertible metal-back glenoid systems in total shoulder arthroplasty (aTSA) groups over a follow-up period of up to five years.
METHODS
A retrospective analysis included 69 shoulders from 65 patients with primary aTSA. Patients were divided into Group 1 (n=31), receiving convertible cementless stemmed aTSA (Lima SMR) and Group 2 (n=38), receiving humeral head replacement aTSA (Arthrex, Eclipse) both with metal-back glenoid components. Clinical and radiological assessments were conducted at 2, 5, and 10 years postoperatively. Assessments included the following: Constant Score, DASH, SPADI, SSV, Glenohumeral Distance, Critical Shoulder Angle and Lateral Acromion Index. In addition, we compared complications, revision rates and survival rates between groups using Kaplan-Maier curves and Log-Rank-test.
RESULTS
Baseline demographics and preoperative outcome scores showed no significant differences between groups (p≥0.05). The overall revision rate did not significantly differ between groups (Group 1:32% vs. Group 2:24%, p=0.60), nor did the mean time to revision (p=0.27). The mean follow-up was 71±41 months (Group 1: 94±48 months, Group 2: 53±23 months, p<0.001). Kaplan-Meier analysis showed similar mid-term survival probabilities (p=0.94). Revision reasons included rotator cuff insufficiency (n=4 in Group 1, n=2 in Group 2) and glenoid wear/loosening (n=5 in Group 1, n=7 in Group 2). Interestingly, Group 1 demonstrated no occurrence of glenoid metal baseplate or humeral loosening, while complex revisions were more common in the Group 2. At 2 and 5 years, non-revised patients in both groups had similar outcome scores.
CONCLUSION
Metal-backed glenoid implants in combination with both stemless and stemmed humeral components in aTSA exhibit comparable revision rates and survival probabilities. Rotator cuff insufficiency and polyethylene wear are the two most common complications leading to revision. To facilitate ongoing monitoring and optimize patient safety, we implemented a modification in the follow-up protocol, transitioning to annual appointments or earlier when necessary. This study underscores the unsolved disadvantages in metal-back components and the importance of a mid- to long-term longitudinal assessment of those patients.
PubMed: 38944377
DOI: 10.1016/j.jse.2024.05.017 -
The Journal of Arthroplasty Jun 2024Despite the potential advantage of all-polyethylene tibial components, modular metal-backed component use predominates the market in the United States for total knee...
BACKGROUND
Despite the potential advantage of all-polyethylene tibial components, modular metal-backed component use predominates the market in the United States for total knee arthroplasty (TKA). This is partially driven by concerns about the associated revision risk due to the lack of modularity with all-polyethylene components. This study utilized the American Joint Replacement Registry (AJRR) to compare the associated risk of all-cause revision and revision for infection for all-polyethylene versus modular metal-backed tibial components.
METHODS
An analysis of primary TKA cases in patients aged 65 years and older was performed with AJRR data linked to Centers for Medicare and Medicaid Services data from 2012 to 2019. Analyses compared all-polyethylene to modular metal-backed tibial components. We identified 485,024 primary TKA cases, consisting of 479,465 (98.9%) metal-backed and 5,559 (1.1%) all-polyethylene. Cox proportional hazard regression analyses created hazard ratios (HRs) to evaluate the association of design and the risk of all-cause revision while adjusting for sex, age and the competing risk of mortality. Event-free survival curves evaluate time to revision.
RESULTS
The all-polyethylene tibia group demonstrated a decreased risk for all-cause revision (HR = 0.37, 95% CI [confidence interval]: 0.24 to 0.55, P < 0.0001) and revision for infection (HR = 0.41, 95% CI: 0.22 to 0.77, P < 0.0001). Event-free survival curves demonstrated a decreased risk of all-cause revision that persisted across time points until 8 years post-TKA.
CONCLUSION
In the United States, all-polyethylene tibial component use for TKA remains low compared to modular metal-backed designs. A decreased associated risk for revision should ease concerns about the use of all-polyethylene components in patients aged 65 years or older, and future investigations should investigate the potential cost and value savings associated with expanded use in this population.
PubMed: 38944062
DOI: 10.1016/j.arth.2024.06.060 -
Ecotoxicology and Environmental Safety Jun 2024Since we rely entirely on plastics or their products in our daily lives, plastics are the invention of the hour. Polyester plastics, such as Polyethylene Terephthalate...
Since we rely entirely on plastics or their products in our daily lives, plastics are the invention of the hour. Polyester plastics, such as Polyethylene Terephthalate (PET), are among the most often used types of plastics. PET plastics have a high ratio of aromatic components, which makes them very resistant to microbial attack and highly persistent. As a result, massive amounts of plastic trash accumulate in the environment, where they eventually transform into microplastic (<5 mm). Rather than macroplastics, microplastics are starting to pose a serious hazard to the environment. It is imperative that these polymer microplastics be broken down. Through the use of enrichment culture, the PET microplastic-degrading bacterium was isolated from solid waste management yards. Bacterial strain was identified as Gordonia sp. CN2K by 16 S rDNA sequence analysis and biochemical characterization. It is able to use polyethylene terephthalate as its only energy and carbon source. In 45 days, 40.43 % of the PET microplastic was degraded. By using mass spectral analysis and HPLC to characterize the metabolites produced during PET breakdown, the degradation of PET is verified. The metabolites identified in the spent medium included dimer compound, bis (2-hydroxyethyl) terephthalate (BHET), mono (2-hydroxyethyl) terephthalate (MHET), and terephthalate. Furthermore, the PET sheet exposed to the culture showed considerable surface alterations in the scanning electron microscope images. This illustrates how new the current work is.
PubMed: 38944007
DOI: 10.1016/j.ecoenv.2024.116635 -
Environment International Jun 2024The presence in seawater of low-molecular-weight polyethylene (PE) and polydimethylsiloxane (PDMS), synthetic polymers with high chemical resistance, has been...
The presence in seawater of low-molecular-weight polyethylene (PE) and polydimethylsiloxane (PDMS), synthetic polymers with high chemical resistance, has been demonstrated in this study for the first time by developing a novel methodology for their recovery and quantification from surface seawater. These synthetic polymer debris (SPD) with very low molecular weights and sizes in the nano- and micro-metre range have escaped conventional analytical methods. SPD have been easily recovered from water samples (2 L) through filtration with a nitrocellulose membrane filter with a pore size of 0.45 μm. Dissolving the filter in acetone allowed the isolation of the particulates by centrifugation followed by drying. The isolated SPD were analysed by H nuclear magnetic resonance spectroscopy (H NMR), identifying PE and PDMS. These polymers are thus persisting on seawater because of their low density and the ponderal concentrations were quantified in mg/m. This method was used in an actual case study in which 120 surface seawater samples were collected during two sampling campaigns in the Mediterranean Sea (from the Gulf of Salerno to the Gulf of Policastro in South Italy). The developed analytical protocol allowed achieving unprecedented simplicity, rapidity and sensitivity. The H and C NMR structural analysis of the PE debris indicates the presence of oxidised polymer chains with very low molecular weights. Additionally, the origin of those low molecular weight polymers was investigated by analysing influents and effluents from a wastewater treatment plant (WWTP) in Salerno as a hot spot for the release of SPD: the analysis indicates the presence of low molecular weight polymers compatible with wax-PE, widely used for coating applications, food industry, cosmetics and detergents. Moreover, the origin of PDMS debris found in surface seawater can be ascribed to silicone-based antifoamers and emulsifiers.
PubMed: 38943925
DOI: 10.1016/j.envint.2024.108839 -
Journal of Environmental Management Jun 2024Microplastics (MPs) have been found in remote high-altitude areas, but the main source and migration process remained unclear. This work explored the characteristics and...
Microplastics (MPs) have been found in remote high-altitude areas, but the main source and migration process remained unclear. This work explored the characteristics and potential sources of MPs in the Yarlung Tsangpo River Basin. The average abundances of MPs in water, sediment, and soil samples were 728.26 ± 100.53 items/m, 43.16 ± 5.82 items/kg, and 61.92 ± 4.29 items/kg, respectively, with polypropylene and polyethylene as the main polymers. The conditional fragmentation model revealed that the major source of MPs lower than 4000 m was human activities, while that of higher than 4500 m was atmospheric deposition. Community analysis was further conducted to explore the migration process and key points of MPs among different compartments in the basin. It was found that Lhasa (3600 m) and Shigatse (4100 m) were vital sources of MPs inputs in the midstream and downstream, respectively. This work would provide new insights into the fate of MPs in high-altitude areas.
PubMed: 38943743
DOI: 10.1016/j.jenvman.2024.121623 -
Bratislavske Lekarske Listy 2024To create a new mucoadhesive dosage form based on PluronicF127 followed by transformation into a gel form upon intranasal administration for targeted delivery to brain...
OBJECTIVES
To create a new mucoadhesive dosage form based on PluronicF127 followed by transformation into a gel form upon intranasal administration for targeted delivery to brain tissueMETHODS: Citicoline, cytidine diphosphocholine, designated as CDP-choline, was purchased as a white powder with the molecular weight of 510.31 g/mol. The triblock copolymers of polyethylene glycol-block-polypropylene glycol-block-polyethylene glycol (PEG-PPG-PEG), branded as Pluronic F127, was used.
RESULTS
When instilled into the nasal cavity, Pluronic F127 for intranasal administration is transformed into a gel that remains retained for 45-55 minutes, which promotes better penetration of drugs into the brain tissue.
CONCLUSION
The polymer's gelling and adhesive properties performed well, which is crucial for further research at the preclinical stage (Tab. 1, Fig. 5, Ref. 28).
Topics: Administration, Intranasal; Poloxamer; Brain; Drug Delivery Systems; Animals; Cytidine Diphosphate Choline; Gels; Polyethylene Glycols; Nasal Mucosa
PubMed: 38943505
DOI: 10.4149/BLL_2024_67 -
Technology and Health Care : Official... Jun 2024Uncemented acetabular components are widely used in modern total hip arthroplasty (THA). Modularity has numerous advantages including the ability to use supplementary...
BACKGROUND
Uncemented acetabular components are widely used in modern total hip arthroplasty (THA). Modularity has numerous advantages including the ability to use supplementary screw fixation for the shell, and allow to switch from ceramic to polyethylene (PE) bearings and vice versa, and the use of lipped and face-changing liners.
OBJECTIVE
Despite these advantages, a problem with modular PE liners is dissociation. This is a rare complication in modern implants. The rate of liner dissociation is reported to be very low between 0.17% and 0.8%. Typical symptoms are sudden onset of groin pain in a previously well-functioning hip joint, followed by grinding or clicking sensations during hip joint motions indicating, that the femoral head is articulating with the metal acetabular shell rather than with the PE liner. Any newly observed noise or squeaking from a THA should undergo radiographic investigation to exclude liner dissociation.
CASE PRESENTATION
We present the case of an 88-yearold male patient who developed PE liner dissociation in a cementless THA with a Pinnacle acetabular component six years after the index operation. We recommended revision of the left hip, which was performed two days later. In the interim, the patient was advised to use a pair of crutches. During revision surgery, it was observed that the metal head made contact with the cementless cup shell without damaging it from a macroscopic standpoint. Consequently, a simple exchange of the PE liner was conducted, and a 36 mm metal head was implanted due to scratches on the original head.
CONCLUSION
Early diagnosis facilitates a straightforward exchange of the liner along with the head, potentially preserving the osseous integrated cup shell and stem integrity. Routine radiologic follow-up allows to distinguish between PE liner dissociation and severe PE wear.
PubMed: 38943412
DOI: 10.3233/THC-240016