-
Dental Materials : Official Publication... May 2019A systematic review of in vitro studies was conducted to assess the effect of thermal treatments on flexural strength or critical load to failure of porcelain-veneered... (Meta-Analysis)
Meta-Analysis
OBJECTIVES
A systematic review of in vitro studies was conducted to assess the effect of thermal treatments on flexural strength or critical load to failure of porcelain-veneered zirconia (PVZ).
SOURCES
Literature searches were performed up to June 2018 in PubMed/MEDLINE, Scopus and Web of Science databases, with no publication year or language limits.
DATA
From 393 relevant studies, 21 were selected for full-text analysis, from which 7 failed to meet the inclusion criteria. The 14 remaining papers were included in the systematic review: 8 for meta-analysis and 6 restricted to descriptive analyses. Hand searching of reference lists resulted in no additional papers.
STUDY SELECTION
In vitro studies using PVZ specimens testing the influence of thermal treatments on the fracture resistance to monotonic or cyclic loading. Papers evaluating cooling rate were divided into those applying fast cooling from above the porcelain glass transition temperature (T), or from below it. Meta-analyses were performed separately for flexural strength and critical load to failure, using random effects at a 5% significance level.
CONCLUSIONS
Delaying furnace opening at a temperature below the porcelain T is advised for PVZ restorations, in order to improve their fracture resistance. Additional information is required to confirm the apparent beneficial effect of self-glaze and repeated veneer firings on the mechanical properties of these restorations. Finally, in order to obtain conclusive and relevant evidence regarding thermal treatments and the fracture resistance of PVZs, future studies should concentrate on anatomically-correct crown specimens.
Topics: Crowns; Dental Porcelain; Dental Stress Analysis; Dental Veneers; Materials Testing; Stress, Mechanical; Surface Properties; Zirconium
PubMed: 30846374
DOI: 10.1016/j.dental.2019.02.016 -
Clinical Oral Implants Research Oct 2018To identify clinical studies evaluating efficiency and/or effectiveness of digital technologies as compared to conventional manufacturing procedures for the fabrication...
Is the use of digital technologies for the fabrication of implant-supported reconstructions more efficient and/or more effective than conventional techniques: A systematic review.
OBJECTIVE
To identify clinical studies evaluating efficiency and/or effectiveness of digital technologies as compared to conventional manufacturing procedures for the fabrication of implant-supported reconstructions.
MATERIALS AND METHODS
A systematic search from 1990 through July 2017 was performed using the online databases Medline, Embase, and Cochrane-Central-Register-of-Controlled-Trials. Literature on efficiency and/or effectiveness during the impression session, the manufacturing process, and the delivery session were included.
RESULTS
In total, 12 clinical studies were included. No meta-analysis was performed due to a large heterogeneity of the study protocols. Nine publications reported on posterior single implant crowns (SIC) and three on full-arch reconstructions. Mean impression time with intraoral scanners ranged between 6.7 and 19.8 min, whereas the range for conventional impressions was 8.8 and 18.4 min. In a fully digital workflow (FD-WF) for posterior SIC, mean fabrication time ranged between 46.8 and 54.5 min (prefabricated abutment) and 68.0 min (customized abutment). In a hybrid workflow (H-WF) including a digitally customized abutment and a manual veneering, mean fabrication time ranged between 132.5 and 158.1 min. For a conventional porcelain-fused-to-metal-crown, a mean time of 189.8 min was reported. The mean time for the delivery of posterior SIC ranged between 7.3 and 7.4 min (FD-WF), 10.5 and 12.5 min (H-WF), and 15.3 min (conventional workflow, C-WF). The FD-WF for posterior SIC was more effective than the H-/C-WF.
CONCLUSIONS
The implementation of the studied digital technologies increased time efficiency for the laboratory fabrication of implant-supported reconstructions. For posterior SIC, the model-free fabrication, the use of prefabricated abutments, and the monolithic design was most time efficient and most effective.
Topics: Computer-Aided Design; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Humans
PubMed: 30306680
DOI: 10.1111/clr.13300 -
BMC Oral Health Sep 2017The continuous development in dental processing ensures new opportunities in the field of fixed prosthodontics in a complete virtual environment without any physical... (Review)
Review
BACKGROUND
The continuous development in dental processing ensures new opportunities in the field of fixed prosthodontics in a complete virtual environment without any physical model situations. The aim was to compare fully digitalized workflows to conventional and/or mixed analog-digital workflows for the treatment with tooth-borne or implant-supported fixed reconstructions.
METHODS
A PICO strategy was executed using an electronic (MEDLINE, EMBASE, Google Scholar) plus manual search up to 2016-09-16 focusing on RCTs investigating complete digital workflows in fixed prosthodontics with regard to economics or esthetics or patient-centered outcomes with or without follow-up or survival/success rate analysis as well as complication assessment of at least 1 year under function. The search strategy was assembled from MeSH-Terms and unspecific free-text words: {(("Dental Prosthesis" [MeSH]) OR ("Crowns" [MeSH]) OR ("Dental Prosthesis, Implant-Supported" [MeSH])) OR ((crown) OR (fixed dental prosthesis) OR (fixed reconstruction) OR (dental bridge) OR (implant crown) OR (implant prosthesis) OR (implant restoration) OR (implant reconstruction))} AND {("Computer-Aided Design" [MeSH]) OR ((digital workflow) OR (digital technology) OR (computerized dentistry) OR (intraoral scan) OR (digital impression) OR (scanbody) OR (virtual design) OR (digital design) OR (cad/cam) OR (rapid prototyping) OR (monolithic) OR (full-contour))} AND {("Dental Technology" [MeSH) OR ((conventional workflow) OR (lost-wax-technique) OR (porcelain-fused-to-metal) OR (PFM) OR (implant impression) OR (hand-layering) OR (veneering) OR (framework))} AND {(("Study, Feasibility" [MeSH]) OR ("Survival" [MeSH]) OR ("Success" [MeSH]) OR ("Economics" [MeSH]) OR ("Costs, Cost Analysis" [MeSH]) OR ("Esthetics, Dental" [MeSH]) OR ("Patient Satisfaction" [MeSH])) OR ((feasibility) OR (efficiency) OR (patient-centered outcome))}. Assessment of risk of bias in selected studies was done at a 'trial level' including random sequence generation, allocation concealment, blinding, completeness of outcome data, selective reporting, and other bias using the Cochrane Collaboration tool. A judgment of risk of bias was assigned if one or more key domains had a high or unclear risk of bias. An official registration of the systematic review was not performed.
RESULTS
The systematic search identified 67 titles, 32 abstracts thereof were screened, and subsequently, three full-texts included for data extraction. Analysed RCTs were heterogeneous without follow-up. One study demonstrated that fully digitally produced dental crowns revealed the feasibility of the process itself; however, the marginal precision was lower for lithium disilicate (LS2) restorations (113.8 μm) compared to conventional metal-ceramic (92.4 μm) and zirconium dioxide (ZrO2) crowns (68.5 μm) (p < 0.05). Another study showed that leucite-reinforced glass ceramic crowns were esthetically favoured by the patients (8/2 crowns) and clinicians (7/3 crowns) (p < 0.05). The third study investigated implant crowns. The complete digital workflow was more than twofold faster (75.3 min) in comparison to the mixed analog-digital workflow (156.6 min) (p < 0.05). No RCTs could be found investigating multi-unit fixed dental prostheses (FDP).
CONCLUSIONS
The number of RCTs testing complete digital workflows in fixed prosthodontics is low. Scientifically proven recommendations for clinical routine cannot be given at this time. Research with high-quality trials seems to be slower than the industrial progress of available digital applications. Future research with well-designed RCTs including follow-up observation is compellingly necessary in the field of complete digital processing.
Topics: Computer-Aided Design; Dental Prosthesis Design; Dental Prosthesis, Implant-Supported; Humans; Workflow
PubMed: 28927393
DOI: 10.1186/s12903-017-0415-0 -
The Cochrane Database of Systematic... Sep 2015Endodontic treatment involves removal of the dental pulp and its replacement by a root canal filling. Restoration of root filled teeth can be challenging due to... (Review)
Review
BACKGROUND
Endodontic treatment involves removal of the dental pulp and its replacement by a root canal filling. Restoration of root filled teeth can be challenging due to structural differences between vital and non-vital root-filled teeth. Direct restoration involves placement of a restorative material e.g. amalgam or composite, directly into the tooth. Indirect restorations consist of cast metal or ceramic (porcelain) crowns. The choice of restoration depends on the amount of remaining tooth, and may influence durability and cost. The decision to use a post and core in addition to the crown is clinician driven. The comparative clinical performance of crowns or conventional fillings used to restore root-filled teeth is unknown. This review updates the original, which was published in 2012.
OBJECTIVES
To assess the effects of restoration of endodontically treated teeth (with or without post and core) by crowns versus conventional filling materials.
SEARCH METHODS
We searched the following databases: the Cochrane Oral Health Group's Trials Register, CENTRAL, MEDLINE via OVID, EMBASE via OVID, CINAHL via EBSCO, LILACS via BIREME. We also searched the reference lists of articles and ongoing trials registries.There were no restrictions regarding language or date of publication. The search is up-to-date as of 26 March 2015.
SELECTION CRITERIA
Randomised controlled trials (RCTs) or quasi-randomised controlled trials in participants with permanent teeth that have undergone endodontic treatment. Single full coverage crowns compared with any type of filling materials for direct restoration or indirect partial restorations (e.g. inlays and onlays). Comparisons considered the type of post and core used (cast or prefabricated post), if any.
DATA COLLECTION AND ANALYSIS
Two review authors independently extracted data from the included trial and assessed its risk of bias. We carried out data analysis using the 'treatment as allocated' patient population, expressing estimates of intervention effect for dichotomous data as risk ratios, with 95% confidence intervals (CI).
MAIN RESULTS
We included one trial, which was judged to be at high risk of performance, detection and attrition bias. The 117 participants with a root-filled, premolar tooth restored with a carbon fibre post, were randomised to either a full coverage metal-ceramic crown or direct adhesive composite restoration. None experienced a catastrophic failure (i.e. when the restoration cannot be repaired), although only 104 teeth were included in the final, three-year assessment. There was no clear difference between the crown and composite group and the composite only group for non-catastrophic failures of the restoration (1/54 versus 3/53; RR 0.33; 95% CI 0.04 to 3.05) or failures of the post (2/54 versus 1/53; RR 1.96; 95% CI 0.18 to 21.01) at three years. The quality of the evidence for these outcomes is very low. There was no evidence available for any of our secondary outcomes: patient satisfaction and quality of life, incidence or recurrence of caries, periodontal health status, and costs.
AUTHORS' CONCLUSIONS
There is insufficient evidence to assess the effects of crowns compared to conventional fillings for the restoration of root-filled teeth. Until more evidence becomes available, clinicians should continue to base decisions about how to restore root-filled teeth on their own clinical experience, whilst taking into consideration the individual circumstances and preferences of their patients.
Topics: Adult; Crowns; Dental Restoration, Permanent; Female; Humans; Male; Middle Aged; Post and Core Technique; Randomized Controlled Trials as Topic; Tooth Root; Tooth, Nonvital
PubMed: 26403154
DOI: 10.1002/14651858.CD009109.pub3