-
BMC Oral Health Jun 2024There are more than one million children and adolescents living with type 1 diabetes mellitus, and their number is steadily increasing. Diabetes affects oral health... (Meta-Analysis)
Meta-Analysis
OBJECTIVE
There are more than one million children and adolescents living with type 1 diabetes mellitus, and their number is steadily increasing. Diabetes affects oral health through numerous channels, including hyposalivation, immune suppression, and the inflammatory effect of glycation end-products. However, patients with type 1 diabetes must follow a strict sugar free diet that is proven to be carioprotective. Therefore, the aim of this systematic review and meta-analysis is to investigate whether children with type 1 diabetes have a difference in Decayed, Missing, Filled Teeth index (DMFT), salivary function, and periodontal status than children without diabetes, with an emphasis on glycemic control.
MATERIALS AND METHODS
PubMed, Embase and Cochrane libraries were screened for articles, using predefined search keys without any language or date restrictions. Two independent authors performed the selection procedure, extracted data from the eligible articles, carried out a manual search of the reference lists, and assessed the risk of bias using the Newcastle-Ottawa scale. Meta-analysis was performed in R using the random-effects model. Effect sizes were mean differences; subgroup analysis was performed on glycemic control.
RESULTS
33 studies satisfied the eligibility criteria. 22 studies did not show a significant difference regarding the DMFT index between the diabetes and non-diabetes groups; six studies found that children living with diabetes had higher DMFT scores, compared to five studies that found significantly lower scores. Meta-analysis found no statistically significant differences in plaque, gingival, and calculus indexes, however it found significant differences in pooled DMFT indexes, and salivary flow rate. Subgroup analysis on glycemic control using DMFT values found significant differences in children with good and poor glycemic control with results of 0.26 (CI95%=-0.50; 1.03) and 1.46 (CI95%=0.57; 2.35), respectively.
CONCLUSIONS
Children with poor glycemic control face higher risk of developing caries compared to good control and non-diabetes children. Regular dental check-ups and strict control of glycemic levels are highly advised for children living with type 1 diabetes, further emphasizing the importance of cooperation between dentists and diabetologists.
Topics: Child; Humans; Diabetes Mellitus, Type 1; DMF Index; Glycemic Control; Oral Health
PubMed: 38943074
DOI: 10.1186/s12903-024-04516-y -
NPJ Precision Oncology Jun 2024Oral epithelial dysplasia (OED) is a premalignant histopathological diagnosis given to lesions of the oral cavity. Its grading suffers from significant...
Oral epithelial dysplasia (OED) is a premalignant histopathological diagnosis given to lesions of the oral cavity. Its grading suffers from significant inter-/intra-observer variability, and does not reliably predict malignancy progression, potentially leading to suboptimal treatment decisions. To address this, we developed an artificial intelligence (AI) algorithm, that assigns an Oral Malignant Transformation (OMT) risk score based on the Haematoxylin and Eosin (H&E) stained whole slide images (WSIs). Our AI pipeline leverages an in-house segmentation model to detect and segment both nuclei and epithelium. Subsequently, a shallow neural network utilises interpretable morphological and spatial features, emulating histological markers, to predict progression. We conducted internal cross-validation on our development cohort (Sheffield; n = 193 cases) and independent validation on two external cohorts (Birmingham and Belfast; n = 89 cases). On external validation, the proposed OMTscore achieved an AUROC = 0.75 (Recall = 0.92) in predicting OED progression, outperforming other grading systems (Binary: AUROC = 0.72, Recall = 0.85). Survival analyses showed the prognostic value of our OMTscore (C-index = 0.60, p = 0.02), compared to WHO (C-index = 0.64, p = 0.003) and binary grades (C-index = 0.65, p < 0.001). Nuclear analyses elucidated the presence of peri-epithelial and intra-epithelial lymphocytes in highly predictive patches of transforming cases (p < 0.001). This is the first study to propose a completely automated, explainable, and externally validated algorithm for predicting OED transformation. Our algorithm shows comparable-to-human-level performance, offering a promising solution to the challenges of grading OED in routine clinical practice.
PubMed: 38942998
DOI: 10.1038/s41698-024-00624-8 -
Clinical Oral Investigations Jun 2024Increasing evidence indicates that the thickness of periodontal soft tissues plays an important role in various clinical scenarios, thus pointing to the need of further...
OBJECTIVES
Increasing evidence indicates that the thickness of periodontal soft tissues plays an important role in various clinical scenarios, thus pointing to the need of further clinical research in this area. Aim of the present study was to assess gingival thickness at the mandibular incisors by translucency judgement with two different probes and to validate if these methods are comparable and applicable as diagnostic tools.
MATERIALS AND METHODS
A total of 200 participants were included; gingival tissue thickness was measured by judging probe translucency at both central mandibular incisors, mid-facially on the buccal aspect of each tooth using a standard periodontal probe and a set of color-coded probe, each with a different color at the tip, i.e. Colorvue Biotype Probe (CBP). Frequencies and relative frequencies were calculated for probe visibility. Agreement between the standard periodontal probe and the CBP was evaluated via the kappa statistic.
RESULTS
When the periodontal probe was visible, the frequency of CBP being visible was very high. Kappa statistic for the agreement between the standard periodontal probe and the CBP was 0.198 (71.5% agreement; p-value < 0.001) for tooth 41 and 0.311 (74.0% agreement; p-value < 0.001) for tooth 31, indicating a positive association of the two methods.
CONCLUSIONS
An agreement that reached 74% was estimated between the standard periodontal probe and the color-coded probe at central mandibular incisors. CLINICAL RELEVANCE: In the context of the present study, the two methods of evaluating gingival thickness seem to produce comparable measurements with a substantial agreement. However, in the 1/4 of the cases, the visibility of the color-coded probe could not assist in the categorization of the gingival phenotype.
Topics: Humans; Incisor; Cross-Sectional Studies; Female; Gingiva; Male; Mandible; Adult; Middle Aged
PubMed: 38942966
DOI: 10.1007/s00784-024-05672-9 -
British Dental Journal Jun 2024This case presents clinical techniques and materials that may be applied in the management of internal tunnelling root resorption, a rare condition which has little...
This case presents clinical techniques and materials that may be applied in the management of internal tunnelling root resorption, a rare condition which has little published literature.A 25-year-old woman was referred to a specialist centre by her general dental practitioner following an incidental finding of a radiographic radiolucency, suggestive of root resorption associated with tooth 21. A provisional diagnosis of external cervical resorption was made, and following cone beam computed tomography (CBCT), a definitive diagnosis of internal tunnelling root resorption given. Non-surgical endodontic treatment was completed using continuous wave compaction with a calcium-silicate based sealer. No further intervention has been required.A summary of the histology, aetiology, prevalence, diagnosis, management and prognosis of internal tunnelling root resorption is provided. The benefits of CBCT for diagnosing and managing internal tunnelling resorption defects and using continuous wave compaction with a calcium-silicate based sealer, compared to cold obturation techniques, are discussed.
Topics: Humans; Root Resorption; Female; Adult; Incisor; Cone-Beam Computed Tomography; Root Canal Filling Materials; Silicates; Calcium Compounds; Maxilla; Root Canal Therapy
PubMed: 38942857
DOI: 10.1038/s41415-024-7504-7 -
NPJ Vaccines Jun 2024
PubMed: 38942773
DOI: 10.1038/s41541-024-00910-3 -
Dental Materials : Official Publication... Jun 2024This study aimed to determine the crystalline phase composition of 3-6 mol% yttria-stabilized zirconia (3-6YSZ), specifically investigating the presence of tetragonal...
OBJECTIVES
This study aimed to determine the crystalline phase composition of 3-6 mol% yttria-stabilized zirconia (3-6YSZ), specifically investigating the presence of tetragonal (t), cubic (c), and/or additional yttria-rich tetragonal (t') phase.
METHODS
Laboratory-fabricated specimens comprising 3-5YSZ, resembling translucent dental zirconia ceramics (TZ specimens), and a blend of 3YSZ and 8YSZ, representing a c-phase reference, were prepared. Additionally, 25 dental zirconia products stabilized with 3-6 mol% yttria were analyzed. Whole X-ray diffraction (XRD) patterns were obtained for Rietveld analysis, complemented by fine scanning in the 2θ region from 72º to 76º for qualitative phase analysis. Moreover, yttria concentrations in each specimen were determined using X-ray fluorescence (XRF) spectroscopy.
RESULTS
In the 2θ region from 72º to 76º, TZ and dental zirconia product specimens displayed four peaks attributed to t- and t'-phases, but the c-phase peak was absent. Rietveld analysis of the whole XRD patterns, utilizing a t-t' model, demonstrated the t-phase fraction ranging from 86 mass% in 3YSZ to 11 mass% in 6YSZ. Rietveld analysis appeared reliable, as the yttria contents calculated based on lattice parameters aligned well with those measured by XRF. This study established that dental 3-6YSZ consisted of yttria-lean t- and yttria-rich t'-phases.
SIGNIFICANCE
The present study enhances understanding of the crystalline structure of dental zirconia ceramics. Future crystallographic analyses of these ceramics should consider the presence of t- and t'-phases.
PubMed: 38942711
DOI: 10.1016/j.dental.2024.06.027 -
Journal of Oral Biosciences Jun 2024This study aimed to investigate the regulatory mechanisms governing dental mesenchymal cell commitment during tooth development, focusing on odontoblast differentiation...
Exploring the Role of DNMT1 in Dental Papilla Cell Fate Specification during Mouse Tooth Germ Development through Integrated Single-Cell Transcriptomics and Bulk RNA Sequencing.
OBJECTIVES
This study aimed to investigate the regulatory mechanisms governing dental mesenchymal cell commitment during tooth development, focusing on odontoblast differentiation and the role of epigenetic regulation in this process.
METHODS
We performed single-cell RNA sequencing (scRNA-seq) of dental cells from embryonic day 14.5 (E14.5) mice to understand the heterogeneity of developing tooth germ cells. Computational analyses including gene regulatory network (GRN) assessment were conducted. We validated our findings using immunohistochemistry (IHC) and in vitro loss-of-function analyses using the DNA methyltransferase 1 (DNMT1) inhibitor Gsk-3484862 in primary dental mesenchymal cells (DMCs) isolated from E14.5 mouse tooth germs. Bulk RNA-seq of Gsk-3484862-treated DMCs was performed to identify potential downstream targets of DNMT1.
RESULTS
scRNA-seq analysis revealed diverse cell populations within the tooth germs, including epithelial, mesenchymal, immune, and muscle cells. Using single-cell regulatory network inference and clustering (SCENIC), we identified Dnmt1 as a key regulator of early odontoblast development. IHC analysis showed the ubiquitous expression of DNMT1 in the dental papilla and epithelium. Bulk RNA-seq of cultured DMCs showed that Gsk-3484862 treatment upregulated odontoblast-related genes, whereas genes associated with cell division and the cell cycle were downregulated. Integrated analysis of bulk RNA-seq data with scRNA-seq SCENIC profiles was used to identify the potential Dnmt1 target genes.
CONCLUSIONS
Dnmt1 may negatively affect odontoblast commitment and differentiation during tooth development. These findings contribute to a better understanding of the molecular mechanisms underlying tooth development and future development of hard-tissue regenerative therapies.
PubMed: 38942194
DOI: 10.1016/j.job.2024.06.010 -
European Journal of Dentistry Jun 2024The proper closure of the access cavity between appointments during endodontic treatment is paramount and relies on temporary fillings. This systematic review evaluates...
The proper closure of the access cavity between appointments during endodontic treatment is paramount and relies on temporary fillings. This systematic review evaluates the effectiveness of zinc oxide-based materials and glass-ionomer cement (GIC) as temporary coronal sealers after root canal treatment in extracted human teeth. Three databases were searched to identify randomized clinical trials that examined the sealing properties of various temporary sealing materials using dyes or stains as indicators. A total of seven studies that fulfilled the eligibility criteria were critically analyzed. These indicated significant variations in the relative sealing ability of the coronal breach of endodontically treated teeth, either by zinc oxide or GIC-based materials. While GIC-based material (e.g., Fuji IX and Fuji II) exhibited superior sealing of single-rooted teeth, zinc oxide-based material (e.g., Cavit, Coltosol, Caviton) also showed promising attributes. Resin-modified GIC formulations displayed enhanced physical properties, yet challenges related to adhesive failure and shrinkage during polymerization were observed. Zinc oxide-based materials have demonstrated superior coronal sealing effectiveness over certain GIC in controlled settings. Their premixed nature ensures consistent application and hygroscopic properties improve cavity sealing. However, the focus on dye penetration tests for microleakage may not fully represent the risk of bacterial infiltration. Thus, studies are crucial for validating these findings in clinical contexts.
PubMed: 38942056
DOI: 10.1055/s-0044-1782695 -
European Journal of Dentistry Jun 2024The current research aimed to evaluate the histopathological pulpal alterations in dogs' teeth following direct pulp capping using either mineral trioxide aggregate...
OBJECTIVE
The current research aimed to evaluate the histopathological pulpal alterations in dogs' teeth following direct pulp capping using either mineral trioxide aggregate (MTA) or human placenta extract (HPE).
MATERIALS AND METHODS
Forty-eight incisors with mature apices from four dogs were involved. The teeth were randomly allocated to three groups ( = 16) based on the material utilized for direct pulp capping: MTA, HPE, and Teflon as the negative control group. All involved teeth were capped and restored at the same session. Each group was subsequently divided into two subgroups ( = 8) based on the post treatment evaluation period: 2 and 4 weeks. The histopathologic changes in each specimen's pulp tissues, including pulp inflammation, hyperemia, necrosis, and dentin bridge development, were assessed. Then, all the data were statistically analyzed using chi-square, -test, and one-way analysis of variance ( < 0.05).
RESULTS
At 2 weeks, chronic inflammation was observed in 100% of MTA and 50% of HPE subgroups with a significant difference between them whereas the remaining 50% exhibited no inflammation. In contrast to Teflon that showed acute inflammation, remission of inflammation was time-dependent at both MTA and HPE subgroups as there was a substantial difference between the 2- and 4-weeks evaluation periods within the same group. However, throughout the initially observed 2 weeks, all subgroups exhibited essentially no complete calcified bridge; at 4 weeks, all MTA and HPE subgroups developed dentin bridge formation, with a significant difference between them regarding its thickness.
CONCLUSION
HPE is a promising pulp-capping material inducing less intense chronic inflammation accompanied with thicker dentine bridge formation in comparison to MTA.
PubMed: 38942055
DOI: 10.1055/s-0044-1786841 -
European Journal of Dentistry Jun 2024This study evaluated surface roughness, biaxial flexural strength, and phase transformation of 5Y-PSZ after grinding and polishing with different protocols.
Effect of Grinding and Polishing Protocols on Surface Roughness, Flexural Strength, and Phase Transformation of High-Translucent 5 mol% Yttria-Partially Stabilized Zirconia.
OBJECTIVES
This study evaluated surface roughness, biaxial flexural strength, and phase transformation of 5Y-PSZ after grinding and polishing with different protocols.
MATERIAL AND METHODS
Two commercial 5Y-PSZ, Lava Esthetic (L) and Cercon xt (C), were used and divided into 3 groups: LC and CC represented unpolished control groups; LE and CE were polished with protocol I (EVE DIASYNT® PLUS HP following with EVE DIACERA RA); and LJ and CJ were polished with protocol II (Superfine diamond bur following with Jota ZIR Gloss polishing kit). Surface roughness was evaluated after polishing step-by-step with a contact-type profilometer. After high-gross polishing, the specimens were subjected to biaxial flexural strength test, crystallographic microstructure analysis using an X-ray diffractometer (XRD), and surface micro-topography using scanning electron microscopy (SEM).
STATISTICAL ANALYSIS
Surface roughness differences after each step and biaxial flexural strength between groups were evaluated with one-way ANOVA, followed by Bonferroni post-hoc analysis. Changes in surface roughness across four different time points within groups were assessed using one-way repeated measures ANOVA, followed by Bonferroni post-hoc analysis.
RESULTS
After high-gross polishing, both polishing protocols showed significantly lower surface roughness than the grinding group ( < 0.05). The LE and CE groups exhibited the highest surface roughness values, which were significant differences from the LJ and CJ groups ( < 0.05). The LE group showed significantly lower biaxial flexural strength compared to the LC group ( < 0.05). However, there was no statistically significant difference in the CE and CJ groups compared to the control group ( > 0.05). Furthermore, all polishing protocols did not change the phase transformation of zirconia.
CONCLUSION
Polishing protocol II provided a smoother surface than the protocol I after high-gross polishing, while the biaxial flexural strength of materials remained unaffected.
PubMed: 38942054
DOI: 10.1055/s-0044-1787001