-
Journal of Prosthodontic Research Jan 2024Purpose Temporomandibular disorders (TMDs) are frequent stomatological disorders. However, their treatment is controversial. Therefore, we compared the efficacy of... (Meta-Analysis)
Meta-Analysis
Purpose Temporomandibular disorders (TMDs) are frequent stomatological disorders. However, their treatment is controversial. Therefore, we compared the efficacy of combination therapy (splint therapy along with physiotherapy, manual therapy, and counseling) with physiotherapy, manual therapy, and counseling alone. The extent of mouth opening and pain perception were the outcomes.Study selection Systematic searches for English publications were performed using four major literature databases (Cochrane Library, EMBASE, PubMed, and Web of Science). We included randomized controlled trials. We calculated mean differences with 95% confidence interval (CI) for pain perception and maximum mouth opening (MMO) for the two groups. The Hartung-Knapp adjustment was used for cases comprising at least five studies.Results Six articles were included in the pain perception category, and four were reviewed for MMO at baseline. Four articles assessed pain perception, and two assessed MMO at 1 month. Five articles were analyzed upon comparing pain perception at baseline and 1-month follow-up. The mean difference was -2.54 [95% CI: -3.38; to -1.70] in the intervention group and -2.33 [95% CI: -4.06; to -0.61] in the control group. Two articles were analyzed upon comparing MMO at baseline and 1-month follow-up. The mean difference in the intervention group was 3.69 [95% CI: -0.34; 7.72], whereas that in the control group was 3.62 [95% CI: -3.43; 10.67].Conclusions Both therapies can be used in the management of myogenic TMD. Due to the marginal differences between the baseline and 1-month values, our results could not confirm the efficacy of combination therapy.
Topics: Humans; Splints; Treatment Outcome; Randomized Controlled Trials as Topic; Temporomandibular Joint Disorders; Pain
PubMed: 37286515
DOI: 10.2186/jpr.JPR_D_22_00264 -
Maedica Mar 2023This article presents the case of a 32-year-old woman with two distinct temporomandibular joint pathologies: right temporomandibular joint arthralgia, headache, disc...
This article presents the case of a 32-year-old woman with two distinct temporomandibular joint pathologies: right temporomandibular joint arthralgia, headache, disc displacement with reduction and intermittent locking, and limited opening, whereas the left temporomandibular joint was showing arthralgia and subluxation. A neurologist was regularly consulted and treated the patient for migraine. A detailed clinical assessment was used in the therapeutic approach. Cone beam computed tomography (CBCT) was used in the paraclinical assessment to evaluate the temporomandibular joint (TMJ); CBCT imaging revealed condylar bone changes that were not correlated with the clinical symptoms. To alleviate TMJ symptoms, the treatment plan included anti-inflammatory drugs, physiotherapy and an occlusal splint with lateral guiding ramps. After three months of anti-inflammatory medication, physiotherapy and splint wear, an improvement in the migraine symptoms and enhanced life quality was reported. The variation in pathology between the right and left joints and the extended history of temporomandibular disorder onset with no definitive diagnosis or therapy make this case unique.
PubMed: 37266461
DOI: 10.26574/maedica.2023.18.1.136 -
BMJ Open May 2023Although treatment of obstructive sleep apnoea (OSA) using continuous positive airway pressure (CPAP) reduces blood pressure (BP), adherence to CPAP is often suboptimal....
INTRODUCTION
Although treatment of obstructive sleep apnoea (OSA) using continuous positive airway pressure (CPAP) reduces blood pressure (BP), adherence to CPAP is often suboptimal. A mandibular advancement device (MAD) is a guideline-endorsed alternative therapy for OSA. Still, there is limited evidence on the relative efficacy between MAD and CPAP on BP reduction. We evaluate whether treatment of moderate-to-severe OSA using MAD can improve BP and other health-related outcomes compared with CPAP.
METHODS AND ANALYSIS
This is a randomised, controlled, non-inferiority trial conducted. We will recruit 220 Asians with a history of hypertension and high cardiovascular risk for an overnight polysomnography screening. Those with moderate-to-severe OSA (apnoea-hypopnoea index ≥15 events/hour) will be randomised to treatment with either MAD or CPAP in a 1:1 ratio. Stratified by age (60 vs <60 years old), body mass index (25 vs <25 kg/m) and apnoea-hypopnoea index (30 vs <30 events/hour), an adaptive randomisation scheme with permuted blocks constructed in real-time is implemented to restrict imbalance. The overall study duration is 12 months. The primary endpoint is the 24-hour mean arterial BP difference between baseline and 6-month follow-up. The secondary endpoints include other measures of ambulatory BP monitoring, arrhythmia based on a 4-day electrocardiographic monitoring, biomarker and proteomic analysis, cardiovascular magnetic resonance-derived myocardial fibrosis and remodelling and quality-of-life questionnaires. Recruitment began in October 2019 and ended in December 2022. Comparison between MAD and CPAP will be performed using covariance (ANCOVA) analysis of the changes in 24-hour mean arterial BP while adjusting for the baseline 24-hour mean arterial BP. We will compare the 95% CIs around the treatment difference point estimate with the prespecified non-inferiority margin (1.5 mm Hg). If the upper limit of the 95% CI is <1.5 mm Hg and crosses 0, non-inferiority of the MAD relative to CPAP will be established.
ETHICS AND DISSEMINATION
The Domain Specific Review Board-C, National Healthcare Group under approved the study protocol (NHG DSRB Ref: 2019/00359, approved on 28 August 2019). Study findings will be disseminated to various local, national, and international audiences through abstract presentations and publication in peer-reviewed journals.
TRIAL REGISTRATION NUMBER
NCT04119999.
Topics: Humans; Middle Aged; Blood Pressure; Continuous Positive Airway Pressure; Occlusal Splints; Proteomics; Hypertension; Sleep Apnea, Obstructive; Randomized Controlled Trials as Topic
PubMed: 37258080
DOI: 10.1136/bmjopen-2023-072853 -
Bioengineering (Basel, Switzerland) Apr 2023Abnormal bite force is an important risk factor for oral and maxillofacial disorders, which is a critical dilemma that dentists face every day without effective...
Abnormal bite force is an important risk factor for oral and maxillofacial disorders, which is a critical dilemma that dentists face every day without effective solutions. Therefore, it is of great clinical significance to develop a wireless bite force measurement device and explore quantitative measurement methods to help find effective strategies for improving occlusal diseases. This study designed the open window carrier of a bite force detection device through 3D printing technology, and then the stress sensors were integrated and embedded into a hollow structure. The sensor system mainly consisted of a pressure signal acquisition module, a main control module, and a server terminal. A machine learning algorithm will be leveraged for bite force data processing and parameter configuration in the future. This study implemented a sensor prototype system from scratch to fully evaluate each component of the intelligent device. The experimental results showed reasonable parameter metrics for the device carrier and demonstrated the feasibility of the proposed scheme for bite force measurement. An intelligent and wireless bite force device with a stress sensor system is a promising approach to occlusal disease diagnosis and treatment.
PubMed: 37237577
DOI: 10.3390/bioengineering10050507 -
Dentistry Journal May 2023This article describes the authors' digital workflow-based method for fabricating intraoral occlusal splints, from planning to the evaluation phase.
INTRODUCTION
This article describes the authors' digital workflow-based method for fabricating intraoral occlusal splints, from planning to the evaluation phase.
MATERIALS AND METHODS
In our protocol, first, we had a registration phase. This included taking digital impressions, determining the centric relation (CR) position with the deprogrammer Luci Jig, and using the digital facebow for measuring the individual values. The laboratory phase was next, which included planning and manufacturing with a 3D printer. The last phase was delivery, when we checked the stability of the splint and adjusted the occlusal part.
RESULT
The average cost is lower for a fully digital splint than for conventional methods. In terms of time, there was also a significant difference between the classic and digital routes. From a dental technical point of view, the execution was much more predictable. The printed material was very rigid and, therefore, fragile. Compared to the analog method, the retention was much weaker.
CONCLUSION
The presented method permits time-efficient laboratory production, and may also be performed chairside in a dental office. The technology is perfectly applicable to everyday life. In addition to its many beneficial properties, its negative properties must also be highlighted.
PubMed: 37232777
DOI: 10.3390/dj11050126 -
BMC Oral Health May 2023Occlusal splints are always applied on individuals with bruxism to reduce tooth wear and relieve orofacial symptoms such as myofascial pain. The stomatognathic system is...
OBJECTIVE
Occlusal splints are always applied on individuals with bruxism to reduce tooth wear and relieve orofacial symptoms such as myofascial pain. The stomatognathic system is mainly composed of tooth, occlusion, masticatory muscles, and temporomandibular joint. The occlusion and masticatory muscles function are regarded as the important parameters for evaluating the stomatognathic system state objectively. However, the effects of occlusal splints on individuals with bruxism is rarely elucidated from accurate neuromuscular analysis and occlusion evaluation. The aim of the present study was to estimate the effects of three different splints (two clinically common full coverage occlusal splint and an modified anterior splint) on subjects with bruxism using K7-J5 neuromuscular analysis system and Dental Prescale II (DP2) to evaluate occlusion.
METHODS
Sixteen subjects claimed to be suffering from nocturnal bruxism,with complete dentition and stable occlusal relationship, were selected for study.The intermaxillary space and the baselines of EMG-activity of the anterior temporalis and masseter were recorded for all the subjects. The participants was treated with three different splints, and outcomes were estimated by comfort index, occlusion and surface electromyography of anterior temporalis and masseter.
RESULTS
At teeth clenched position, EMG data were significantly lower in the participants with use of modified anterior splint than with hard, soft occlusal splint or without splint (p < 0.05). The maximum bite force and bite area occur in subjects without use of splint, while the minimal occur in subjects with use of modified anterior splint. Intermaxillary space increased and masticatory muscles presented significant reduction of EMG data at rest position as a result of J5 (p < 0.05).
CONCLUSION
Modified anterior splint seems to be more comfortable and effective in reducing occlusion force and electromyographic activity of anterior temporalis and masseter for subjects with bruxism.
Topics: Humans; Splints; Bruxism; Dental Occlusion; Masticatory Muscles; Masseter Muscle; Electromyography
PubMed: 37231466
DOI: 10.1186/s12903-023-03044-5 -
Plastic and Reconstructive Surgery.... May 2023LeFort I, II, and III osteotomies are commonly used in complex craniofacial reconstruction. Patients requiring these procedures typically have a craniofacial cleft,...
LeFort I, II, and III osteotomies are commonly used in complex craniofacial reconstruction. Patients requiring these procedures typically have a craniofacial cleft, other congenital craniofacial deformities, or severe facial trauma. Both the cleft and traumatized palate have poor bony support, which leads to possible complications when the disimpaction forceps are used during the downfracture of the maxilla. Such potential complications include trauma or formation of a fistula of the palatal, oral, or nasal mucosa; trauma to adjacent teeth; and fracture of the palate and alveolar bone. To help prevent these complications, we developed a custom disimpaction splint. The splint is designed to cover the palate and occlusal surfaces to increase retention and minimize splint movement during the maxillary downfracture portion of the surgical procedure. The base of the splint is fabricated from a two-layered biocryl material, and the palatal area is built with soft-cushion rebase material. This allows for a stable grip of the disimpaction forceps blades and provides protective coverage of the cleft, traumatized palate, or alveolar bone graft site during the downfracture. The custom maxillary disimpaction splint has been routinely used in our clinic from September 2019 to the present for LeFort osteotomies in patients with a compromised primary palate. No surgical complications related to the maxillary downfracture have been noted during this period of time. We conclude that the routine use of a custom maxillary disimpaction splint can result in improved outcomes and decreased complications of LeFort osteotomy procedures in patients with cleft and traumatized palate.
PubMed: 37180987
DOI: 10.1097/GOX.0000000000004976 -
Brazilian Oral Research 2023This study aimed to compare the mechanical properties of various occlusal plate materials by analyzing surface roughness, Knoop microhardness, flexural strength, and...
This study aimed to compare the mechanical properties of various occlusal plate materials by analyzing surface roughness, Knoop microhardness, flexural strength, and modulus of elasticity. Fifty samples were prepared and classified as SC (self-curing acrylic resin), WB (heat-cured acrylic resin), ME (acrylic resin polymerized by microwave energy), P (resin print), and M (polymethylmethacrylate polymer block for computer-aided design/computer-aided manufacturing). The data were analyzed using a one-way analysis of variance and Tukey's honestly significant difference test. Surface roughness was the same in all groups. The surface hardness of group M was statistically superior. The samples from groups P and M had higher flexural strength than other samples. The modulus of elasticity of group SC was statistically lower than that of other groups. The mechanical properties of the materials used to make the occlusal plates differed, and group M achieved the best results in all analyses. Therefore, clinicians must consider the material used to manufacture long-lasting and efficient occlusal splints.
Topics: Occlusal Splints; Acrylic Resins; Computer-Aided Design; Flexural Strength; Hardness; Materials Testing; Surface Properties; Stress, Mechanical
PubMed: 37132723
DOI: 10.1590/1807-3107bor-2023.vol37.0034 -
Polymers Apr 2023This in vitro study aimed to evaluate the hardness and color change of an ethylene-vinyl-acetate copolymer (EVA) material for mouthguards after exposition to different...
This in vitro study aimed to evaluate the hardness and color change of an ethylene-vinyl-acetate copolymer (EVA) material for mouthguards after exposition to different cleaning agent solutions and isotonic drinks. Four hundred samples were prepared and divided into four equinumerous groups (n = 100), in which there were 25 samples from each color of EVA (red, green, blue and white). The hardness, using the digital durometer, and the color coordinates (CIE L*a*b*), using the digital colorimeter, were measured before the first exposition and after 3 months of exposition to spray disinfection and incubation in the oral cavity temperature, or immersion in isotonic drinks. The values of Shore A hardness (HA) and color change (ΔE-calculated by Euclidean distance) were statistically analyzed using the Kolmogorov-Smirnov test, multiple comparison ANOVA/Kruskal-Wallis and appropriate post-hoc tests. Statistically significant changes in color and hardness between the tested groups were demonstrated after the use of agents predestined for disinfecting the surface of mouthguards on the tested samples. There were no statistically significant differences in color and hardness between the groups immersed in isotonic sport drinks potentially consumed by competitors practicing combat sports using mouthguards. Despite the changes in color and hardness after the use of disinfectants, the deviations were minor and limited to specific colors of the EVA plates. The intake of isotonic drinks practically did not change either the color or the hardness of the samples, regardless of the tested color of the EVA plates.
PubMed: 37111969
DOI: 10.3390/polym15081822 -
Journal of Lasers in Medical Sciences 2023Dentures, occlusal splints, surgical guides and orthodontic appliances are examples of acrylic resin devices made in dental laboratories, which must be disinfected and...
Dentures, occlusal splints, surgical guides and orthodontic appliances are examples of acrylic resin devices made in dental laboratories, which must be disinfected and even sterilized before insertion into the oral cavity. This study evaluated the antimicrobial effect of photodynamic therapy (PDT) applied to acrylic resin specimens received from different laboratories. Three hundred standardized specimens were ordered from six randomly selected laboratories registered in the Council of Dentistry of Ceará (n=50). The PDT consisted in the association of 22 µM erythrosine, as a photosensitizer (P), and a 520-nm LED at 38 J/cm (L). The specimens of each laboratory were randomly distributed into five groups: positive control, sterilized with ethylene oxide; negative control, untreated (P-L-); erythrosine control, only stained (P+L-); LED control, only irradiated (P-L+); PDT (P+L+). Then, the specimens were individually sonicated in saline solution; the suspension was diluted, plated on culture mediums (blood agar, sabouraud dextrose agar and a non-selective chromogenic agar), and incubated for 48 hours at 37°C. Colony-forming-unit (CFU) counts were done and statistical tests of Kruskal-Wallis/Dunn were carried out. The specimens from all laboratories were contaminated with bacteria and yeasts. , , , spp., spp. were identified. The PDT significantly reduced CFU counts (<0.0001), compared to P-L-. PDT was able to effectively decontaminate the acrylic resin specimens provided from dental laboratories.
PubMed: 37089770
DOI: 10.34172/jlms.2023.08