-
Frontiers in Bioengineering and... 2024Overtreatment design of clear aligner treatment (CAT) in extraction cases is currently primarily based on the clinical experience of orthodontists and is not supported...
BACKGROUND
Overtreatment design of clear aligner treatment (CAT) in extraction cases is currently primarily based on the clinical experience of orthodontists and is not supported by robust evidence on the underlying biomechanics. This study aimed to investigate the biomechanical effects of overtreatment strategies involving different maxillary anterior teeth intrusion patterns during anterior teeth retraction by CAT in extraction cases.
MATERIALS AND METHODS
A finite element model of the maxillary dentition with the first premolar extracted was constructed. A loading method of clear aligners (CAs) based on the initial state field was proposed. The iterative method was used to simulate the long-term orthodontic tooth movement under the mechanical load exerted by the CAs. Three groups of CAs were utilized for anterior teeth retraction (G0: control group; G1: incisors intrusion group; G2: anterior teeth intrusion group). Tooth displacement and occlusal plane rotation tendency were analyzed.
RESULTS
In G0, CAT caused lingual tipping and extrusion of the incisors, distal tipping and extrusion of the canines, mesial tipping, and intrusion of the posterior teeth. In G1, the incisors showed minimal extrusion, whereas the canines showed increased extrusion and distal tipping tendency. G2 showed the smallest degree of posterior occlusal plane angle rotation, while the inclination tendency of the canines and second premolars decreased.
CONCLUSION
1. In CAT, tooth displacement tendency may change with increased wear time. 2. During anterior teeth retraction, the incisor intrusion pattern can provide effective vertical control for the lateral incisors but has little effect on the central incisors. Anterior teeth intrusion patterns can alleviate the inclination of canines and second premolars, resulting in partial relief of the roller-coaster effect.
PubMed: 38903188
DOI: 10.3389/fbioe.2024.1388876 -
Materials (Basel, Switzerland) May 2024The manufacturing of orthodontic archwires made from NiTi alloy has undergone numerous changes from the second half of the last century to modern times. Initially,... (Review)
Review
The manufacturing of orthodontic archwires made from NiTi alloy has undergone numerous changes from the second half of the last century to modern times. Initially, superelastic-active austenitic NiTi alloys were predominant, followed by thermodynamic-active martensitic NiTi alloys, and, finally, the most recent development was graded thermodynamic alloys. These advancements have been the subject of extensive investigation in numerous studies, as they necessitated a deeper understanding of their properties. Furthermore, it is imperative that we validate the information provided by manufacturers regarding these archwires through independent studies. This review evaluates existing studies on the subject with a specific focus on the Bio-active multi-force NiTi archwire, by examining its mechanical, thermal, and physicochemical properties before and after clinical use. This archwire consists primarily of Ni and Ti, with traces of Fe and Cr, which release graduated, biologically tolerable forces which increase in a front-to-back direction and are affected by the temperature of the environment they are in. The review provides information to practicing orthodontists, facilitating informed decisions regarding the selection and use of Bio-active™ archwires for individual patient treatments.
PubMed: 38893867
DOI: 10.3390/ma17112603 -
Journal of Clinical Medicine May 2024Temporomandibular disease (TMD) is commonly seen, and divers also experience pain in the temporomandibular joint (TMJ) or masticatory muscles. This article aims to...
Temporomandibular disease (TMD) is commonly seen, and divers also experience pain in the temporomandibular joint (TMJ) or masticatory muscles. This article aims to provide a tool for diving physicians or medical professionals involved in diving medicine since jaw pain among divers is a pertinent subject and can be challenging to evaluate without some background in dentistry or maxillofacial surgery. A basic algorithm was developed to provide a tool to differentiate jaw pains experienced by divers. Three brief case studies were developed, and five diving physicians were tasked with diagnosing the cases using the algorithm. Additionally, simple exercises and massage techniques that can benefit patients with TMD, particularly immediately after diving, are outlined. All five diving physicians successfully diagnosed the cases using the algorithm. However, three of them were unable to diagnose the first case (disc luxation) without consulting the algorithm. Nevertheless, all physicians acknowledged the utility of the algorithm. Jaw pain in divers can stem from diverse causes, but effective treatment options exist. Our study findings provide valuable insights to assist diving physicians in making accurate diagnoses and guiding appropriate patient management, which may include referrals to specialists such as dentists, maxillofacial surgeons, or orthodontists.
PubMed: 38892877
DOI: 10.3390/jcm13113167 -
Cureus May 2024A well-aligned dentition is more conducive to periodontal health, which is necessary for successful orthodontic therapy. Maintaining good dental hygiene is crucial for...
A well-aligned dentition is more conducive to periodontal health, which is necessary for successful orthodontic therapy. Maintaining good dental hygiene is crucial for effective treatment, and patient cooperation, education, motivation, and attitude are all important components. Orthodontists must routinely check in with their patients to see whether they are maintaining their oral hygiene and if they are using any additional assistance. Negligence on the part of the patient may be the cause of poor treatment outcomes. This study aims to show how patient education can affect treatment outcomes and the development of a functional, aesthetically pleasing, and healthy dentition. Aim This study aims to investigate awareness, attitude, and periodontal health knowledge among orthodontic patients. Objectives The study explores the level of awareness and knowledge regarding periodontal health among orthodontic patients, examining its correlation with factors such as age, attitude, and duration of orthodontic treatment. Additionally, it aims to gauge the extent of education received by orthodontic patients regarding proper oral hygiene practices and the potential repercussions of neglecting them. Methods A questionnaire-based study with a cross-sectional design was performed in Jeddah, Saudi Arabia. A total of 428 participants were randomly selected from several private orthodontic clinics and hospitals. The participants in the study were individuals currently undergoing treatment with fixed orthodontic appliances. Information was gathered using a self-administered questionnaire. Results The patients undergoing orthodontic treatment have a moderate understanding of periodontal disease about dental plaque. The level of awareness of periodontal health was 41%, and the level of knowledge about periodontal health was 51%. When it came to periodontal health, adult orthodontic patients had a positive attitude toward fixed orthodontic treatment (mean score = 0.75). Subjects' attitudes regarding fixed orthodontic treatment were significantly impacted by the patient's consistency with his/her dental checkups (p value = 0.02). Conclusion The patients' periodontal health awareness was moderate, while their periodontal health knowledge was fair. Orthodontic patient's awareness levels, as well as knowledge levels, showed significant differences in age and duration but not sex. Results showed no significant difference among the attitude levels of orthodontic patients and age, sex, and duration.
PubMed: 38882991
DOI: 10.7759/cureus.60335 -
Cureus May 2024Introduction In orthodontics, having a beautiful smile is very important. It is frequently the main driving force behind people's efforts to enhance their oral health...
Introduction In orthodontics, having a beautiful smile is very important. It is frequently the main driving force behind people's efforts to enhance their oral health and professional opportunities. Orthodontic and dental treatment planning might benefit greatly when evaluating the aesthetic components of a patient's smile in individuals with varying skeletal growth patterns. In order to help orthodontists achieve the best possible functional and aesthetic results for their patients, the eight elements of a balanced smile are essential to orthodontic therapy. This study aims to evaluate, in comparison to Skeletal Class I Average instances, eight balanced smile components in patients with Skeletal Class II Vertical and Horizontal growth patterns. Methodology A total of 45 patients aged 14-30 were selected from the Orthodontics and Dentofacial Orthopedics Out-Patient Department (OPD). They were divided into three groups: Skeletal Class I Average, Skeletal Class II Vertical, and Skeletal Class II Horizontal cases based on their malocclusion type. Patients were made to smile in response to a joke or social conversation and their photos were analyzed using Photopea software (Photopea Inc., Prague, Czech Republic) to determine the eight components of a balanced smile. Result Three skeletal classes' worth of smile components were examined in this study. Lip line measurements varied greatly; the highest mean measurement was found in the Skeletal Class II Vertical group (p-value < 0.01). There were no noteworthy correlations found between smile arc and upper lip curvature. Measurements of lateral negative space did not show any significant group differences. On the other hand, a significant correlation was seen in smile symmetry, where asymmetrical smiles were more prevalent in Skeletal Classes I and II Vertical groups (p-value is 0.00072). While arch symmetry suggested a potential relationship between the groups, dental midline alignment revealed possible associations. Conclusion Assessing the aesthetic components of smiles in patients with varying skeletal growth patterns, i.e., contrasting Class II Vertical and Horizontal growth patterns with Class I Average cases, provides valuable information about the connection between smile aesthetics and facial skeletal structure. The results suggest that when compared to Class I typical instances, Skeletal Class II Vertical and Horizontal growth patterns may show clear variations in certain aspects of an attractive smile. Comprehending these variations is essential for devising treatment strategies for patients, and additional investigation is needed. In order to obtain optimal aesthetic outcomes, treatment strategies should strive to optimize smile aesthetics while addressing personalized treatment plans that take into account the patient's unique facial features, smiling preferences, and functional requirements.
PubMed: 38882971
DOI: 10.7759/cureus.60399 -
Journal of Pharmacy & Bioallied Sciences Apr 2024To assess the dentist perception of efficiency, treatment outcome, and stability of the tooth movement treated with mysmartalign clear aligner therapy (MSA CAT).
AIM AND OBJECTIVE
To assess the dentist perception of efficiency, treatment outcome, and stability of the tooth movement treated with mysmartalign clear aligner therapy (MSA CAT).
MATERIALS AND METHOD
A cross-sectional web-based questionnaire survey was carried out to evaluate the dentist perception of MYSMARTALIGN (MSA). To determine the sample size, a pilot study has been carried out and the final sample arrived was 4990 subjects. The current study's inclusion criteria took into account those who had finished their BDS and MDS as well as dentists and orthodontists who had been using the MSA CAT system on their patients for the previous 7 years.
RESULTS
The result of the study showed that most research participants (3650) used MSA to treat mild to moderate malocclusion, and 3996 participants said that initial digital treatment plans have been authorised with no revisions. In view of efficiency, 3894 doctors were satisfied with the final outcome.
CONCLUSIONS
Finally concluded that recent survey showed that dentists were very satisfied with the effectiveness and treatment results of the MSA clear aligner procedure.
PubMed: 38882901
DOI: 10.4103/jpbs.jpbs_1095_23 -
Journal of Pharmacy & Bioallied Sciences Apr 2024Orthodontic treatment planning involves the precise assessment of dental and skeletal anomalies, which can be facilitated by AI-enhanced diagnostic tools.
BACKGROUND
Orthodontic treatment planning involves the precise assessment of dental and skeletal anomalies, which can be facilitated by AI-enhanced diagnostic tools.
MATERIALS AND METHODS
A total of 100 orthodontic cases were included in this RCT. Patients were randomly assigned to two groups: an AI-enhanced diagnostic group and a traditional diagnostic group. The AI-enhanced diagnostic group underwent orthodontic assessment with the aid of AI-powered software, which provided automated cephalometric analysis, 3D model evaluations, and treatment suggestions. The traditional diagnostic group received conventional diagnostic assessments by orthodontists. The primary outcome measures included treatment planning accuracy, treatment time, and patient satisfaction. Secondary outcomes included the number of appointments required and treatment cost.
RESULTS
The AI-enhanced diagnostic group demonstrated a significantly higher accuracy in treatment planning compared to the traditional diagnostic group ( < 0.05). The AI group also required fewer appointments (mean ± SD: 10.2 ± 2.1 vs. 12.8 ± 3.4) and had a shorter treatment time (mean ± SD: 14.6 ± 3.2 months vs. 18.9 ± 4.5 months) ( < 0.001 for both comparisons). Additionally, patient satisfaction scores were higher in the AI group (mean ± SD: 9.2 ± 0.6 vs. 8.1 ± 0.8) ( < 0.001). However, the AI-enhanced diagnostic group had a slightly higher treatment cost.
CONCLUSION
AI-enhanced diagnostic tools significantly enhance the accuracy of treatment planning in orthodontic cases, leading to reduced treatment time, fewer appointments, and increased patient satisfaction.
PubMed: 38882868
DOI: 10.4103/jpbs.jpbs_1147_23 -
Journal of Pharmacy & Bioallied Sciences Apr 2024Accelerated orthodontic treatment has gained popularity in recent years as patients seek shorter treatment durations. Microosteoperforations (MOPs) have emerged as a...
BACKGROUND
Accelerated orthodontic treatment has gained popularity in recent years as patients seek shorter treatment durations. Microosteoperforations (MOPs) have emerged as a minimally invasive technique to expedite tooth movement. This study aims to compare the effectiveness of MOPs in accelerating orthodontic treatment with conventional methods.
MATERIALS AND METHODS
A randomized controlled trial was conducted on 60 orthodontic patients requiring dental alignment. The participants were divided into two groups: Group A (MOPs) and Group B (conventional orthodontic treatment). In Group A, MOPs were performed at the beginning of the treatment. Both groups received monthly orthodontic adjustments. Treatment duration, rate of tooth movement, and patient discomfort were measured and compared between the two groups.
RESULTS
The study found that in Group A, the treatment duration was reduced by 30% compared to Group B ( < 0.05). The rate of tooth movement in the MOPs group was 1.5 times higher than the conventional group ( < 0.01). Additionally, patient-reported discomfort levels were similar between the two groups. No adverse events related to MOPs were observed during the study.
CONCLUSION
MOPs significantly accelerate orthodontic treatment, reducing treatment duration by 30% and increasing the rate of tooth movement by 1.5 times compared to conventional methods. Importantly, MOPs are well-tolerated by patients, making them a valuable option for expediting orthodontic treatment with minimal discomfort. This study highlights the potential benefits of integrating MOPs into orthodontic practice to improve treatment efficiency and patient satisfaction.
PubMed: 38882826
DOI: 10.4103/jpbs.jpbs_1168_23 -
Journal of Pharmacy & Bioallied Sciences Apr 2024To assess the level of total antioxidant capacity (TAC) in the unstimulated saliva of autism children and normal children.
AIM
To assess the level of total antioxidant capacity (TAC) in the unstimulated saliva of autism children and normal children.
METHODS
A total of 60 children participated in the study (autism children-30; normal children-30) in the age-group of 7-14 years, at a Special Needs Children's Home in Salem district. Both groups were further subdivided into subgroups of 15 children each (caries-free and caries-active). All children were given instructions regarding saliva sample collection, and unstimulated saliva samples were collected in sterile cryovials and transported to the laboratory at 4°C, where the TAC of saliva was evaluated using the spectrophotometric assay.
RESULTS
TAC of autism children was comparable to that of normal children due to personal care and improved diet. TAC was increased in caries-active children when compared to caries-free children in both groups. When comparing the mean values of TAC in caries-active and caries-free children of both groups, it was not statistically significant. So, from the above results, it can be assumed that the diet, age, and caries activity have a definitive influence on the TAC level of saliva.
CONCLUSION
Personal hygiene, diet, age, and caries activity have a definitive influence on the level of TAC in saliva.
PubMed: 38882824
DOI: 10.4103/jpbs.jpbs_1182_23 -
Journal of Pharmacy & Bioallied Sciences Apr 2024The aim of this study was to compare the mechanical properties of orthodontic aligners among different commercially available 3D printing devices. Three different 3D...
The aim of this study was to compare the mechanical properties of orthodontic aligners among different commercially available 3D printing devices. Three different 3D printers were included in this study (Formlabs Form 2 3D printer; Moonray S100 printer (Sprintray, Los Angeles, CA, USA); Eden500V Stratasys 3D Printers were used to prepare orthodontic aligners with dental. The central incisors of each aligner were cut, prepared, and evaluated in terms of Martens-Hardness (HM), indentation-modulus (E), and elastic-index (η) as per ISO14577-1:2002. pairwise comparisons indicated no significant difference in Martens-Hardness (HM), indentation-modulus (E), and elastic-index (η) properties in any group. Under the limitations of this study, it may be concluded that the mechanical properties of 3D-printed orthodontic aligners are dependent on the 3D printer used, and thus, differences in their clinical efficacy are anticipated.
PubMed: 38882783
DOI: 10.4103/jpbs.jpbs_796_23