-
Annals of Agricultural and... Jun 2024Ultraviolet light in the UV-C band is known as germicidal radiation and was widely used for both sterilization of the equipment and creation of a sterile environment....
INTRODUCTION AND OBJECTIVE
Ultraviolet light in the UV-C band is known as germicidal radiation and was widely used for both sterilization of the equipment and creation of a sterile environment. The aim of the study is to assess the effectiveness of inactivation of microorganisms deposited on surfaces with various textures by UV-C radiation disinfection devices.
MATERIAL AND METHODS
Five microorganisms (3 bacteria, virus, and fungus) deposited on metal, plastic, and glass surfaces with smooth and rough textures were irradiated with UV-C light emitted by low-pressure mercury lamp and ultraviolet emitting diodes (LEDs), from a distance of 0.5 m, 1 m, and 1.5 m to check their survivability after 20-minute exposure.
RESULTS AND CONCLUSIONS
Both tested UV-C sources were effective in inactivation of microorganisms; however, LED emitter was more efficient in this respect than the mercury lamp. The survival rate of microorganisms depended on the UV-C dose, conditioned by the distance from UV-C source being the highest at 0.5 m and the lowest at 1.5 m. For the tested microorganisms, the highest survival rate after UV-C irradiation was usually visible on glass and plastic surfaces. This observation should be considered in all environments where the type of material (from which the elements of technical equipment are manufactured and may be contaminated by specific activities) is important for maintaining the proper level of hygiene and avoiding the unwanted and uncontrolled spread of microbiological pollution.
Topics: Ultraviolet Rays; Disinfection; Fungi; Bacteria; Viruses; Surface Properties; Microbial Viability; Plastics; Glass
PubMed: 38940114
DOI: 10.26444/aaem/189695 -
Journal of Integrative Neuroscience Jun 2024The majority of neuromyelitis optica spectrum disorders (NMOSD) patients are seropositive for aquaporin-4 (AQP4)-specific antibodies [also named neuromyelitis optica...
OBJECTIVES
The majority of neuromyelitis optica spectrum disorders (NMOSD) patients are seropositive for aquaporin-4 (AQP4)-specific antibodies [also named neuromyelitis optica immunoglobulin G antibodies (NMO-IgG)]. Although NMO-IgG can induce pathological changes in the central nervous system (CNS), the immunological changes in the CNS and peripheral tissue remain largely unknown. We investigated whether NMO-IgG binds to tissue expressing AQP4 and induces immunological changes in the peripheral tissue and CNS.
METHODS
C57BL/6 female mice were assigned into an NMOSD or control group. Pathological and immunological changes in peripheral tissue and CNS were measured by immunostaining and flow cytometry, respectively. Motor impairment was measured by open-field test.
RESULTS
We found that NMO-IgG did bind to astrocyte- and AQP4-expressing peripheral tissue, but induced glial fibrillary acidic protein and AQP4 loss only in the CNS. NMO-IgG induced the activation of microglia and modulated microglia polarization toward the classical (M1) phenotype, but did not affect innate or adaptive immune cells in the peripheral immune system, such as macrophages, neutrophils, Th17/Th1, or IL-10-producing B cells. In addition, NMOSD mice showed significantly less total distance traveled and higher immobility time in the open field.
CONCLUSIONS
We found that injection of human NMO-IgG led to astrocytopathic lesions with microglial activation in the CNS. However, there were no significant pathological or immunological changes in the peripheral tissues.
Topics: Animals; Neuromyelitis Optica; Mice, Inbred C57BL; Immunoglobulin G; Aquaporin 4; Female; Humans; Mice; Disease Models, Animal; Microglia; Autoantibodies; Astrocytes; Glial Fibrillary Acidic Protein; Central Nervous System
PubMed: 38940087
DOI: 10.31083/j.jin2306119 -
Journal of Integrative Neuroscience Jun 2024Alcohol abuse, a prevalent global health issue, is associated with the onset of cognitive impairment and neurodegeneration. Actin filaments (F-actin) and microtubules...
BACKGROUND
Alcohol abuse, a prevalent global health issue, is associated with the onset of cognitive impairment and neurodegeneration. Actin filaments (F-actin) and microtubules (MTs) polymerized from monomeric globular actin (G-actin) and tubulin form the structural basis of the neuronal cytoskeleton. Precise regulation of the assembly and disassembly of these cytoskeletal proteins, and their dynamic balance, play a pivotal role in regulating neuronal morphology and function. Nevertheless, the effect of prolonged alcohol exposure on cytoskeleton dynamics is not fully understood. This study investigates the chronic effects of alcohol on cognitive ability, neuronal morphology and cytoskeleton dynamics in the mouse hippocampus.
METHODS
Mice were provided access to 5% (v/v) alcohol in drinking water and were intragastrically administered 30% (v/v, 6.0 g/kg/day) alcohol for six weeks during adulthood. Cognitive functions were then evaluated using the Y maze, novel object recognition and Morris water maze tests. Hippocampal histomorphology was assessed through hematoxylin-eosin (HE) and Nissl staining. The polymerized and depolymerized states of actin cytoskeleton and microtubules were separated using two commercial assay kits and quantified by Western blot analysis.
RESULTS
Mice chronically exposed to alcohol exhibited significant deficits in spatial and recognition memory as evidenced by behavioral tests. Histological analysis revealed notable hippocampal damage and neuronal loss. Decreased ratios of F-actin/G-actin and MT/tubulin, along with reduced levels of polymerized F-actin and MTs, were found in the hippocampus of alcohol-treated mice.
CONCLUSIONS
Our findings suggest that chronic alcohol consumption disrupted the assembly of the actin cytoskeleton and MTs in the hippocampus, potentially contributing to the cognitive deficits and pathological injury induced by chronic alcohol intoxication.
Topics: Animals; Hippocampus; Microtubules; Actin Cytoskeleton; Male; Ethanol; Mice; Mice, Inbred C57BL; Central Nervous System Depressants; Disease Models, Animal; Behavior, Animal
PubMed: 38940085
DOI: 10.31083/j.jin2306118 -
Frontiers in Bioscience (Landmark... Jun 2024Mesenchymal stem/stromal cells (MSCs) have emerged as a promising therapeutic approach for a variety of diseases due to their immunomodulatory and tissue regeneration... (Review)
Review
Mesenchymal stem/stromal cells (MSCs) have emerged as a promising therapeutic approach for a variety of diseases due to their immunomodulatory and tissue regeneration capabilities. Despite their potential, the clinical application of MSC therapies is hindered by limited cell retention and engraftment at the target sites. Electrospun scaffolds, with their high surface area-to-volume ratio and tunable physicochemical properties, can be used as platforms for MSC delivery. However, synthetic polymers often lack the bioactive cues necessary for optimal cell-scaffold interactions. Integrating electrospun scaffolds and biological polymers, such as polysaccharides, proteins, and composites, combines the mechanical integrity of synthetic materials with the bioactivity of natural polymers and represents a strategic approach to enhance cell-scaffold interactions. The molecular interactions between MSCs and blended or functionalized scaffolds have been examined in recent studies, and it has been shown that integration can enhance MSC adhesion, proliferation, and paracrine secretion through the activation of multiple signaling pathways, such as FAK/Src, MAPK, PI3K/Akt, Wnt/β-catenin, and YAP/TAZ. Preclinical studies on small animals also reveal that the integration of electrospun scaffolds and natural polymers represents a promising approach to enhancing the delivery and efficacy of MSCs in the context of regenerating bone, cartilage, muscle, cardiac, vascular, and nervous tissues. Future research should concentrate on identifying the distinct characteristics of the MSC niche, investigating the processes involved in MSC-scaffold interactions, and applying new technologies in stem cell treatment and biofabrication to enhance scaffold design. Research on large animal models and collaboration among materials scientists, engineers, and physicians are crucial to translating these advancements into clinical use.
Topics: Humans; Mesenchymal Stem Cells; Tissue Scaffolds; Mesenchymal Stem Cell Transplantation; Animals; Polymers; Tissue Engineering
PubMed: 38940050
DOI: 10.31083/j.fbl2906228 -
Frontiers in Bioscience (Elite Edition) Jun 2024Dextran is an exopolysaccharide synthesized in reactions catalyzed by enzymes obtained from microbial agents of specific species and strains. Products of dextran... (Review)
Review
Dextran is an exopolysaccharide synthesized in reactions catalyzed by enzymes obtained from microbial agents of specific species and strains. Products of dextran polysaccharides with different molecular weights are suitable for diverse pharmaceutical and clinical uses. Dextran solutions have multiple characteristics, including viscosity, solubility, rheological, and thermal properties; hence, dextran has been studied for its commercial applications in several sectors. Certain bacteria can produce extracellular polysaccharide dextran of different molecular weights and configurations. Dextran products of diverse molecular weights have been used in several industries, including medicine, cosmetics, and food. This article aims to provide an overview of the reports on dextran applications in blood transfusion and clinical studies and its biosynthesis. Information has been summarized on enzyme-catalyzed reactions for dextran biosynthesis from sucrose and on the bio-transformation process of high molecular weight dextran molecules to obtain preparations of diverse molecular weights and configurations.
Topics: Dextrans; Humans; Blood Transfusion; Molecular Weight
PubMed: 38939916
DOI: 10.31083/j.fbe1602017 -
Frontiers in Bioscience (Elite Edition) May 2024Flaxseed mucilage (FSM) is one of the healthy components of flaxseed. FSM is an example of a material that can be used in the food, cosmetic, and pharmaceutical...
BACKGROUND
Flaxseed mucilage (FSM) is one of the healthy components of flaxseed. FSM is an example of a material that can be used in the food, cosmetic, and pharmaceutical industries due to its rheological properties. FSM consists mainly of two polysaccharides, arabinoxylan, and rhamnogalacturonan I, and it also contains protein components and minerals. The prospect of using FSM in food is due to its gelling, water binding, emulsifying, and foaming properties. In addition, valuable natural sources of phenolic compounds such as lignans, phenolic acids, flavonoids, phenylpropanoids, and tannins are partially extracted from flaxseed in FSM. These antioxidant components have pharmacological properties, including anti-diabetic, anti-hypertensive, immunomodulatory, anti-inflammatory and neuroprotective properties. A combination of FSM and lactobacilli in dairy foods can improve their functional properties. This study aimed to develop dairy products by adding of FSM and using two lactic acid bacteria (LAB). FSM (0.2%) was used as an ingredient to improve both the texture and antioxidant properties of the product.
METHODS
Skim milk was fermented with 0.2% flaxseed mucilage using and the probiotic AG9. The finished fermented milk products were stored at 4 °C for 14 days. Quantitative chemical, textural, and antioxidant analyses were carried out.
RESULTS
Adding 0.2% FSM to the dairy product stimulated the synthesis of lactic acid. FSM increased the viscosity and water-holding capacity of or AG9 fermented milk products. Combining these starter strains with FSM promoted the formation of a hard, elastic, resilient casein matrix in the product. When only AG9 was used for the fermentation, the dairy product had a high syneresis and a low viscosity and firmness; such a product is inferior in textural characteristics to the variant with commercial . The addition of FSM improved the textural properties of this variant. The use of AG9 and FSM makes it possible to obtain a fermented milk product with the highest content of polyphenolic compounds, which have the highest antioxidant properties and stimulate lipase and α-glucosidase inhibitor synthesis. Combining of and AG9 in the starter (20% of the total mass of the starter) and adding of 0.2% FSM is the optimal combination for obtaining a dairy product with high textural and antioxidant properties.
CONCLUSIONS
The physicochemical properties (viscosity, syneresis, water holding capacity, texture) and antioxidant properties of fermented milk were improved. In the future, as part of the work to investigate the functional properties of dairy products with FSM, studies will be conducted using in models.
Topics: Flax; Lactobacillus delbrueckii; Plant Mucilage; Lactobacillus plantarum; Antioxidants; Cultured Milk Products; Animals; Milk; Fermentation
PubMed: 38939910
DOI: 10.31083/j.fbe1602011 -
ACS Sustainable Chemistry & Engineering Jun 2024Understanding the properties of polymers, such as their crystallinity, is crucial for their material performance and predicting their behavior during and after use,...
Understanding the properties of polymers, such as their crystallinity, is crucial for their material performance and predicting their behavior during and after use, especially in the case of environmentally friendly (bio)degradable polymers, enabling optimized design. In this work, for the first time, a pressure-induced condis crystal-like mesophase of poly(butylene succinate--butylene adipate) (PBSA) is presented. The phase behavior of pressed films obtained from commercial PBSA with 25% butylene adipate units is investigated at various processing temperatures from room temperature to 100 °C, pressed at a pressure of the press jaws and at 2-5 t for 1-5 min. The characterization and quantification evaluation of the condis crystal-like mesophase of pressed PBSA formed at temperatures above the glass transition is investigated by X-ray diffraction, polarized optical microscopy (POM), and differential scanning calorimetry (DSC) methods. Our results demonstrate that pressed PBSA films at 60 °C show a condis crystal-like mesophase, characterized by the presence of reflections at wide angles, birefringence by POM, as well as a higher melting point (endotherm) by DSC. The resulting oriented mesomorphic green polymer can, in a sustainable manner, expand further technological applications of (bio)degradable polymers, especially in the medical field, and open up opportunities for further research that could provide such polymers with tailored persistence and degradation, thus changing the shelf life.
PubMed: 38939870
DOI: 10.1021/acssuschemeng.4c03285 -
Journal of Immunology Research 2024Sepsis treatment is a challenging condition due to its complexity, which involves host inflammatory responses to a severe and potentially fatal infection, associated... (Review)
Review
Sepsis treatment is a challenging condition due to its complexity, which involves host inflammatory responses to a severe and potentially fatal infection, associated with organ dysfunction. The aim of this study was to analyze the scientific literature on the immunomodulatory effects of glucans in a murine model of systemic infection induced by cecal ligation and puncture. This study comprises an integrative literature review based on systematic steps, with searches carried out in the PubMed, ScienceDirect, Scopus, Web of Science, and Embase databases. In most studies, the main type of glucan investigated was -glucan, at 50 mg/kg, and a reduction of inflammatory responses was identified, minimizing the occurrence of tissue damage leading to increased animal survival. Based on the data obtained and discussed in this review, glucans represent a promising biotechnological alternative to modulate the immune response and could potentially be used in the clinical management of septic individuals.
Topics: Animals; Sepsis; Disease Models, Animal; Humans; Mice; Glucans; beta-Glucans; Immunomodulation
PubMed: 38939744
DOI: 10.1155/2024/6876247 -
Chemical Science Jun 2024Transition metal multimetallic complexes have seen intense study due to their unique bonding and potential for cooperative reactivity, but actinide-transition metal...
Transition metal multimetallic complexes have seen intense study due to their unique bonding and potential for cooperative reactivity, but actinide-transition metal (An-TM) species are far less understood. We have synthesized uranium- and thorium-osmium heterometallic polyhydride complexes in order to study An-Os bonding and investigate the reactivity of An-Os interactions. Computational studies suggest the presence of a significant bonding interaction between the actinide center and the four coordinated osmium centers supported by bridging hydrides. Upon photolysis, these complexes undergo intramolecular C-H activation with the formation of an Os-Os bond, while the thorium complex may activate an additional C-H bond of the benzene solvent, resulting in a μ-η,η phenyl ligand across one Th-Os interaction.
PubMed: 38939147
DOI: 10.1039/d4sc02380c -
Chemical Science Jun 2024A photoinduced reversible addition-fragmentation chain-transfer (photo-RAFT) polymerization technique in the presence of sodium pyruvate (SP) and pyruvic acid...
A photoinduced reversible addition-fragmentation chain-transfer (photo-RAFT) polymerization technique in the presence of sodium pyruvate (SP) and pyruvic acid derivatives was developed. Depending on the wavelength of light used, SP acted as a biocompatible photoinitiator or promoter for polymerization, allowing rapid open-to-air polymerization in aqueous media. Under UV irradiation (370 nm), SP decomposes to generate CO and radicals, initiating polymerization. Under blue (450 nm) or green (525 nm) irradiation, SP enhances the polymerization rate interaction with the excited state RAFT agent. This method enabled the polymerization of a range of hydrophilic monomers in reaction volumes up to 250 mL, eliminating the need to remove radical inhibitors from the monomers. In addition, photo-RAFT polymerization using SP allowed for the facile synthesis of protein-polymer hybrids in short reaction times (<1 h), low organic content (≤16%), and without rigorous deoxygenation and the use of transition metal photocatalysts. Enzymatic studies of a model protein (chymotrypsin) showed that despite a significant loss of protein activity after conjugation with RAFT chain transfer agents, the grafting polymers from proteins resulted in a 3-4-fold recovery of protein activity.
PubMed: 38939137
DOI: 10.1039/d4sc01409j