-
Micromachines May 2024A novel microchannel heat sink (TFMCHS) with trapezoidal ribs and fan grooves was proposed, and the microchannel was manufactured using selective laser melting...
A novel microchannel heat sink (TFMCHS) with trapezoidal ribs and fan grooves was proposed, and the microchannel was manufactured using selective laser melting technology. Firstly, the temperature and pressure drop at different power levels were measured through experiments and then combined with numerical simulation to explore the complex flow characteristics within TFMCHSs and evaluate the comprehensive performance of microchannel heat sinks based on the thermal enhancement coefficient. The results show that, compared with rectangular microchannel heat sinks (RMCHSs), the average and maximum temperatures of TFMCHSs are significantly reduced, and the temperature distribution is more uniform. This is mainly caused by the periodic interruption and redevelopment of the velocity boundary layer and thermal boundary layer caused by ribs and grooves. And as the heating power increases, the TFMCHS has better heat dissipation performance. When P=33 W and the inlet flow rate is 32.5 mL/min, the thermal enhancement factor reaches 1.26.
PubMed: 38930683
DOI: 10.3390/mi15060713 -
Materials (Basel, Switzerland) Jun 2024Orthotropic steel decks (OSDs) are commonly used in the construction of bridges due to their load-bearing capabilities. However, they are prone to fatigue damage over...
Orthotropic steel decks (OSDs) are commonly used in the construction of bridges due to their load-bearing capabilities. However, they are prone to fatigue damage over time due to the cyclic loads from vehicles. Therefore, the early structural health monitoring of fatigue damage in OSDs is crucial for ensuring bridge safety. Moreover, Lamb waves, as elastic waves propagating in OSD plate-like structures, are characterized by their long propagation distances and minimal attenuation. This paper introduces a method of emitting high-energy ultrasonic waves onto the OSD surface to capture the nonlinear Lamb waves formed, thereby calculating the nonlinear parameters. These parameters are then correlated with the fatigue damage endured, forming a damage index (DI) for monitoring the fatigue life of OSDs. Experimental results indicate that as fatigue damage increases, the nonlinear parameters exhibit a significant initial increase followed by a decrease. The behavior is distinct from the characteristic parameters of linear ultrasound (velocity and energy), which also exhibit changes but to a relatively smaller extent. The proposed DI and fatigue life based on nonlinear parameters can be fitted with a Gaussian curve, with the R-squared value of the fitting curve being close to 1. Additionally, this paper discusses the influence of rib welds within the OSDs on the DI, whereby as fatigue damage increases, it enlarges the value of the nonlinear parameters without altering their trend. The proposed method provides a more effective approach for monitoring early fatigue damage in OSDs.
PubMed: 38930164
DOI: 10.3390/ma17122792 -
Posterior-Only T11 Vertebral Column Resection for Pediatric Congenital Kyphosis Surgical Correction.Medicina (Kaunas, Lithuania) May 2024: Congenital kyphosis is a spinal deformity that arises from the inadequate anterior development or segmentation of the vertebrae in the sagittal plane during the...
: Congenital kyphosis is a spinal deformity that arises from the inadequate anterior development or segmentation of the vertebrae in the sagittal plane during the initial embryonic stage. Consequently, this condition triggers atypical spinal growth, leading to the manifestation of deformity. Concurrently, other congenital abnormalities like renal or cardiac defects within the gastrointestinal tract may co-occur with spinal deformities due to their shared formation timeline. In light of the specific characteristics of the deformity, the age range of the patient, deformity sizes, and neurological conditions, surgical intervention emerges as the optimal course of action for such cases. The selection of the appropriate surgical approach is contingent upon the specific characteristics of the anomaly. : This investigation illustrates the utilization of a surgical posterior-only strategy for correcting pediatric congenital kyphoscoliosis through the implementation of a vertebral column resection method along with spine reconstruction employing a mesh cage. The individual in question, a 16-year-old female, exhibited symptoms such as a progressive rib hump, shoulder asymmetry, and back discomfort. Non-invasive interventions like bracing proved ineffective, leading to the progression of the spinal curvature. After the surgical procedure, diagnostic imaging displayed a marked enhancement across all three spatial dimensions. After a postoperative physical assessment, it was noted that the patient experienced significant enhancements in shoulder alignment and rib hump prominence, with no discernible neurological or other adverse effects. : Surgical intervention is considered the optimal approach for addressing such congenital anomalies. Typically, timely surgical intervention leads to favorable results and has the potential to halt the advancement of deformity and curvature enlargement.
Topics: Humans; Kyphosis; Female; Adolescent; Thoracic Vertebrae; Treatment Outcome; Scoliosis
PubMed: 38929517
DOI: 10.3390/medicina60060897 -
Animals : An Open Access Journal From... Jun 2024Stearoyl-CoA desaturase-1 () is a key enzyme in the biosynthesis of monounsaturated fatty acids and is considered a candidate gene for improving milk and meat quality...
Stearoyl-CoA desaturase-1 () is a key enzyme in the biosynthesis of monounsaturated fatty acids and is considered a candidate gene for improving milk and meat quality traits. Sanger sequencing was employed to investigate the genetic polymorphism of the fifth exon and intron of bovine , revealing four SNPs, g.21272246 A>G, g.21272306 T>C, g.21272422 C>T, and g.21272529 A>G. Further variance analysis and multiple comparisons were conducted to examine the relationship between variation sites and economic traits in Chinese Simmental cattle, as well as milk production traits in Holstein cows. The findings revealed these four loci exhibited significant associations with carcass traits (carcass weight, carcass length, backfat thickness, and waist meat thickness), meat quality (pH value, rib eye area, and marbling score), adipogenic traits (fat score and carcass fat coverage rate), and fatty acid composition (linoleic acid and α-linolenic acid). Furthermore, these loci were additionally found to be significantly associated with average milk yield and milk fat content in cows. In addition, a haplotype analysis of combinations of SNPs showed that H2H3 has a significant association with adipogenic traits and H2H2 was associated with higher levels of linoleic acid and α-linolenic acid than the other combinations. These results suggest that the four SNPs are expected to be prospective genetic markers for the above economic traits. In addition, the function of SNPs in exon 5 of on gene expression and protein structure needs to be explored in the future.
PubMed: 38929378
DOI: 10.3390/ani14121759 -
Genes May 2024Myogenic transcription factors with a basic helix-loop-helix (bHLH) such as MYOD, myogenin, MRF4, and MYF5 contribute to muscle differentiation and regulation. The gene...
Myogenic transcription factors with a basic helix-loop-helix (bHLH) such as MYOD, myogenin, MRF4, and MYF5 contribute to muscle differentiation and regulation. The gene located on chromosome 12 encodes for myogenic factor 5 (MYF5), which has a role in skeletal and extraocular muscle development and rib formation. Variants in were found to cause external ophthalmoplegia with rib and vertebral anomalies (EORVA), a rare recessive condition. To date, three homozygous variants in have been reported to cause EORVA in six members of four unrelated families. Here, we present a novel homozygous frameshift variant, c.596dupA p. (Asn199Lysfs*49), causing premature protein termination and presenting with external ophthalmoplegia, ptosis, and scoliosis in three siblings from a consanguineous family of Pakistani origin. With four variants now discovered, genetic testing and paediatric assessment for extra-ocular features should be considered in all cases of congenital ophthalmoplegia.
Topics: Humans; Frameshift Mutation; Male; Female; Myogenic Regulatory Factor 5; Ophthalmoplegia; Ribs; Pedigree; Spine; Child; Homozygote
PubMed: 38927634
DOI: 10.3390/genes15060699 -
BMC Musculoskeletal Disorders Jun 2024Autologous iliac bone is commonly used as a bone graft material to achieve solid fusion in craniocervical junction (CVJ) surgery. However, the developing iliac bone of...
OBJECTIVE
Autologous iliac bone is commonly used as a bone graft material to achieve solid fusion in craniocervical junction (CVJ) surgery. However, the developing iliac bone of children is less than ideal as a bone graft material. The matured rib bone of children presents a potential substitute material for iliac bone. The aim of this study was to evaluate the efficacy of autologous rib grafts for craniocervical junction surgery in children.
METHODS
The outcomes of 10 children with abnormalities of the craniocervical junction who underwent craniocervical junction surgery between January 2020 and December 2022 were retrospectively reviewed. All patients underwent posterior fusion and internal fixation surgery with autologous rib grafts. Pre- and post-operative images were obtained and clinical follow-ups were conducted to evaluate neurological function, pain level, donor site complications, and bone fusion rates.
RESULTS
All surgeries were successful. During the 8- to 24-month follow-up period, all patients achieved satisfactory clinical results. Computed tomography at 3-6 months confirmed successful bone fusion and regeneration of the rib defect in all patients with no neurological or donor site complications.
CONCLUSION
Autologous rib bone is a safe and effective material for bone grafting in craniocervical junction fusion surgery for children that can reduce the risks of donor site complications and increase the amount of bone graft, thereby achieving a higher bone fusion rate.
Topics: Humans; Child; Male; Female; Retrospective Studies; Spinal Fusion; Bone Transplantation; Ribs; Transplantation, Autologous; Treatment Outcome; Child, Preschool; Adolescent; Atlanto-Axial Joint; Follow-Up Studies; Cervical Vertebrae; Atlanto-Occipital Joint; Tomography, X-Ray Computed
PubMed: 38926741
DOI: 10.1186/s12891-024-07607-7 -
BMC Pediatrics Jun 2024Menkes disease (MD) is a rare, inherited, multisystemic copper metabolism disorder. Classical Menkes disease is characterized by low serum copper and ceruloplasmin... (Review)
Review
BACKGROUND
Menkes disease (MD) is a rare, inherited, multisystemic copper metabolism disorder. Classical Menkes disease is characterized by low serum copper and ceruloplasmin concentrations, leading to multiple abnormalities in the whole-body, especially in connective tissue and central nervous system. However, serum copper and ceruloplasmin levels are not reliable diagnostic biomarkers due to the low concentrations in healthy newborns either. The featured imaging manifestations play an important role in diagnosing Menkes disease. To our knowledge, there are few reports on the systemic imaging manifestations of Menkes disease.
CASE PRESENTATION
A 4-month-old male patient presented with recurrent seizures. He had cognitive, intellectual, growth, gross motor, precision movement, and language developmental lags. The patient's hemoglobin and serum ceruloplasmin level were low. On MRI, increased intracranial vascular tortuosity, cerebral and cerebellar atrophy, white matter changes, and basal ganglia abnormalities were observed. Plain radiograph revealed wormian bones, rib flaring, metaphyseal spurring, and periosteal reactions in the long bones of the limbs. A pathogenic variant in ATP7A gene was identified in the patient, so he was confirmed the diagnosis of Menkes disease. His symptoms did not improve despite symptomatic and supportive treatment during his hospitalization. Unfortunately, the infant died 3 months after leaving hospital.
CONCLUSION
A comprehensive and intuitive understanding of the disease's imaging manifestations can help clinicians to identify the disease and avoid delays in care.
Topics: Humans; Menkes Kinky Hair Syndrome; Male; Infant; Magnetic Resonance Imaging; Brain; Whole Body Imaging; Bone and Bones
PubMed: 38926644
DOI: 10.1186/s12887-024-04885-x -
PloS One 2024The volume of human carbon (δ13C) and nitrogen (δ15N) isotope data produced in archaeological research has increased markedly in recent years. However, knowledge of...
The volume of human carbon (δ13C) and nitrogen (δ15N) isotope data produced in archaeological research has increased markedly in recent years. However, knowledge of bone remodelling, its impact on isotope variation, and the temporal resolution of isotope data remains poorly understood. Varied remodelling rates mean different elements (e.g., femur and rib) produce different temporal signals but little research has examined intra-element variability. This study investigates human bone remodelling using osteon population density and the relationship with carbon and nitrogen isotope data at a high resolution, focusing on variation through femoral cross-sections, from periosteal to endosteal surfaces. Results demonstrate considerable differences in isotope values between cross-sectional segments of a single fragment, by up to 1.3‰ for carbon and 1.8‰ for nitrogen, illustrating the need for standardised sampling strategies. Remodelling also varies between bone sections, occurring predominantly within the endosteal portion, followed by the midcortical and periosteal. Therefore, the endosteal portion likely reflects a shorter period of life closer to the time of death, consistent with expectations. By contrast, the periosteal surface provides a longer average, though there were exceptions to this. Results revealed a weak negative correlation between osteon population density and δ15N or δ13C, confirming that remodelling has an effect on isotope values but is not the principal driver. However, a consistent elevation of δ15N and δ13C (0.5‰ average) was found between the endosteal and periosteal regions, which requires further investigation. These findings suggest that, with further research, there is potential for single bone fragments to reconstruct in-life dietary change and mobility, thus reducing destructive sampling.
Topics: Humans; Femur; Bone Remodeling; Carbon Isotopes; Nitrogen Isotopes; Female; Male; Adult; Middle Aged
PubMed: 38923938
DOI: 10.1371/journal.pone.0305089 -
Journal of Imaging May 2024Meat characterized by a high marbling value is typically anticipated to display enhanced sensory attributes. This study aimed to predict the marbling scores of rib-eye,...
Meat characterized by a high marbling value is typically anticipated to display enhanced sensory attributes. This study aimed to predict the marbling scores of rib-eye, steaks sourced from the Longissimus dorsi muscle of different cattle types, namely Boran, Senga, and Sheko, by employing digital image processing and machine-learning algorithms. Marbling was analyzed using digital image processing coupled with an extreme gradient boosting (GBoost) machine learning algorithm. Meat texture was assessed using a universal texture analyzer. Sensory characteristics of beef were evaluated through quantitative descriptive analysis with a trained panel of twenty. Using selected image features from digital image processing, the marbling score was predicted with R (prediction) = 0.83. Boran cattle had the highest fat content in sirloin and chuck cuts (12.68% and 12.40%, respectively), followed by Senga (11.59% and 11.56%) and Sheko (11.40% and 11.17%). Tenderness scores for sirloin and chuck cuts differed among the three breeds: Boran (7.06 ± 2.75 and 3.81 ± 2.24, respectively), Senga (5.54 ± 1.90 and 5.25 ± 2.47), and Sheko (5.43 ± 2.76 and 6.33 ± 2.28 Nmm). Sheko and Senga had similar sensory attributes. Marbling scores were higher in Boran (4.28 ± 1.43 and 3.68 ± 1.21) and Senga (2.88 ± 0.69 and 2.83 ± 0.98) compared to Sheko (2.73 ± 1.28 and 2.90 ± 1.52). The study achieved a remarkable milestone in developing a digital tool for predicting marbling scores of Ethiopian beef breeds. Furthermore, the relationship between quality attributes and beef marbling score has been verified. After further validation, the output of this research can be utilized in the meat industry and quality control authorities.
PubMed: 38921607
DOI: 10.3390/jimaging10060130 -
Scientific Reports Jun 2024As the span of concrete-filled steel tube (CFST) arch bridges increases, the hydration heat temperature effect of concrete inside steel tube becomes more severe, which...
As the span of concrete-filled steel tube (CFST) arch bridges increases, the hydration heat temperature effect of concrete inside steel tube becomes more severe, which increases the safety risk during the construction process. Therefore, a numerical simulation of the mechanical response of a long-span CFST arch bridge under the influence of hydration heat was carried out. First, based on the hydration heat conduction theory, a finite element model of the transient temperature field of a CFST arch rib was established. The temperature distribution of the CFST arch rib and its variation with time were revealed, and an approximate formula for the distribution of the hydration heat temperature along the radial direction of the CFST was provided. Subsequently, the variation law of the thermal stress of a CFST during hydration heat release was investigated. Finally, based on the principle of temperature equivalence, a finite element model of the overall CFST arch rib was established to examine the effect of hydration heat on the deformation of the arch rib. The results reveal that the hydration heat temperature field of the CFST arch rib exhibits nonlinear and axisymmetric characteristics. The maximum temperature of the section and the maximum temperature difference can reach 73.5 °C and 33.2 °C, respectively. Because of the influence of the hydration heat, there is a significant stress gradient in the cross section of the arch rib. A maximum radial stress of 2.08 MPa is attained, indicating a risk of concrete cracking. Additionally, the displacement along the transverse and vertical directions of the chord tube exhibits an initial increase, followed by a decrease over time. The maximum transverse displacement of the chord tube reaches 70.6 mm, while the vertical displacement reaches 117.8 mm.
PubMed: 38918425
DOI: 10.1038/s41598-024-65361-1