-
Frontiers in Oral Health 2024People experiencing homelessness are often marginalised and encounter structural barriers when seeking healthcare. Community-based oral health interventions highlighted...
INTRODUCTION
People experiencing homelessness are often marginalised and encounter structural barriers when seeking healthcare. Community-based oral health interventions highlighted the need of well-trained practitioners for the successful engagement of service users and behaviour change. However, a lack of adequate information and specific training has been previously reported. The adoption of inclusive approaches, such as co-design, to develop tailored and meaningful health promotion training and educational materials capable of addressing the specific needs of this group is required. Co-design entails active involvement of different groups in research processes that acknowledge participants' needs and expectations. This scoping review aims to identify the available literature on the participation of people experiencing homelessness and/or their support workers in co-designing health and oral health promotion training/educational materials, approaches adopted, and barriers and enablers to develop these materials.
METHODS
The Joanna Briggs Institute (JBI) Scoping Review Methodology informed the development of the scoping review. The protocol was registered on the Open Science Framework. Six electronic databases (Medline (OVID), PsychInfo (OVID), Scopus, Web of Science, Applied Social Sciences Index and Abstracts (ASSIA) (ProQuest) and CINHAL) were systematically searched using MeSH terms. An extensive grey literature search, consultation with experts and hand searching of reference lists took place. Records were screened independently and in duplicate using the Rayyan Qatar Computing Research Institute (QCRI) online tool, followed by qualitative content analysis involving descriptive data coding.
RESULTS
Eight studies/materials were included. Key approaches adopted to co-design, enablers and barriers were captured. The enablers were inclusivity, a safe environment for positive participation, empowerment and flexibility, the barriers were difficulty in recruiting and sustaining participation, power differentials, and limited resources.
CONCLUSION
The evidence in this area is limited. This scoping review provided foundations for further research to examine the impact of different components of the co-design process including the environment in which the co-design process is conducted. Further studies with experimental design and reported using appropriate study design frameworks detailing active components of the co-design process would strengthen the evidence base in this area.
PubMed: 38919732
DOI: 10.3389/froh.2024.1355349 -
Clinical Oral Investigations Jun 2024The aim of this review was to analyze mechanical and biological properties of resin materials used with subtractive or additive techniques for oral appliances... (Meta-Analysis)
Meta-Analysis Comparative Study Review
Mechanical and biological properties of polymer materials for oral appliances produced with additive 3D printing and subtractive CAD-CAM techniques compared to conventional methods: a systematic review and meta-analysis.
OBJECTIVES
The aim of this review was to analyze mechanical and biological properties of resin materials used with subtractive or additive techniques for oral appliances fabrication and compare them to those conventionally manufactured.
MATERIALS AND METHODS
The protocol was registered online at Open Science Framework (OSF) registries ( https://osf.io/h5es3 ) and the study was based on the preferred reporting items for systematic review and meta-analysis protocols (PRISMA-P). An electronic search was conducted on MEDLINE (via PubMed), Scopus, and Web of Science from 1 February 2022 to 1 May 2022.
INCLUSION CRITERIA
in vitro and in vivo studies published in the last 10 years, with CAD-CAM or 3D printed resins for occlusal splints. Data considered homogenous were subjected to meta-analysis (95% confidence interval [CI]; α = 0.05) with Stata17 statistical software. Since all variables were continuous, the Hedge g measure was calculated. A fixed-effects model was used for I = 0%, while statistical analysis was conducted using a random-effects model with I > 0%.
RESULTS
13 studies were included after full-text reading. The mechanical properties most studied were wear, flexural strength, surface hardness and surface roughness, while only 1 study investigated biological properties, performing the XTT viability assay. For the meta-analysis, only surface roughness, volume loss, and flexural strength were selected. Considering surface roughness, the subtractive specimen had a lower average value compared to traditional ones (Hedge's g with 95% CI = -1.25[ -1.84, - 0.66]). No significant difference was detected in terms of volume loss (P > 0.05) between the groups (Hedge's g with 95% CI = -0.01 [-2.71, - 2.68]). While flexural strength was higher in the control group (Hedge's g with 95% CI = 2.32 [0.10-4.53]).
CONCLUSION
3D printed materials showed properties comparable to conventional resins, while milled splint materials have not shown better mechanical performance compared with conventional heat-cured acrylic resin. Polyetheretherketone (PEEK) have great potential and needs to be further investigated. Biological tests on oral cell populations are needed to confirm the long-term biocompatibility of these materials.
CLINICAL RELEVANCE
The use of "mixed splints" combining different materials needs to be improved and evaluated in future research to take full advantage of different characteristics and properties.
Topics: Computer-Aided Design; Printing, Three-Dimensional; Humans; Materials Testing; Polymers; Dental Materials; Surface Properties
PubMed: 38916682
DOI: 10.1007/s00784-024-05772-6 -
Journal of Maxillofacial and Oral... Jun 2024Facial anthropometric data vary significantly within the Indian population due to the racial, ethnic and geographic diversity. The anthropometric data of a given ethnic... (Review)
Review
OBJECTIVE
Facial anthropometric data vary significantly within the Indian population due to the racial, ethnic and geographic diversity. The anthropometric data of a given ethnic community may not match the other due to diverse ethnic variations, and hence, this study is intended to review the facial anthropometric data pertaining to the diverse Indian populace through a systematic literature survey.
MATERIALS AND METHOD
An electronic search done on Medline, Embase and Central databases was utilized to conduct a systematic review of literature. The available data were analyzed based on the various esthetic subunits of the face. The following inclusion criteria were considered: (1) studies depicting the anthropometric data of any ethnic group identified as belonging to India, (2) studies originating from Indian subcontinent, (3) studies which included data of male and female subjects separately and (4) articles in English language only. The following exclusion criteria were considered: (1) atudies conducted on participants with severe malocclusion, developmental craniofacial anomalies, post-traumatic facial deformities or with a history of previous craniofacial or cosmetic surgery, (2) studies which did not specify the anthropometric landmarks used to obtain the measurements, (3) studies in which the statistical analysis was not provided, or if data were grouped across genders and (4) editorials, commentaries, case reports, systematic reviews, meta-analyses and articles not available in English language.
RESULTS
Twenty-one articles met the inclusion criteria. Majority of the Indians, particularly men, seem to have a mesoproscopic facial phenotype. The vertical and horizontal facial dimensions of the Indian male are comparably larger than the Indian female. There is sexual dimorphism among the Indian population with regard to the upper and lower thirds of the face, with little or no gender difference as regards the middle third of the face. It was observed that the nasal dimensions of the Indian race were not compatible with that of the occidental, oriental or the western race. The overall facial structure and the upper half of the face were critical in determining facial attractiveness in Indian males while the lower half of the face and the mandibular contour were critical in determining facial attractiveness in females.
CONCLUSION
It is observed that there is a paucity of facial anthropometric data for the Indian population considering the ethnic, racial and geographic diversity. Since the prevalence of craniofacial anomalies and dentofacial deformities in India is high and thus the scope for corrective surgery, it is important to compile baseline facial anthropometric data based on the ethnic diversity of the Indian population.
PubMed: 38911415
DOI: 10.1007/s12663-024-02185-6 -
Journal of Maxillofacial and Oral... Jun 2024A systematic review of the literature on the donor site morbidity in patients undergoing Maxillofacial reconstruction was performed. The two widely used flaps namely... (Review)
Review
INTRODUCTION
A systematic review of the literature on the donor site morbidity in patients undergoing Maxillofacial reconstruction was performed. The two widely used flaps namely free fibula flap (FFF) and DCIA flap were compared to answer the following questions: (1) Is donor site morbidity significantly different in patients undergoing maxillofacial reconstruction with FFF and DCIA flap? (2) Should donor site morbidity be considered as the criteria for choosing the flap for reconstruction.
MATERIALS AND METHODS
The search strategy was based on PRISMA guidelines. Various electronic databases were searched. On reviewing the seven articles included in our systematic review, we found out oral squamous cell carcinoma to be the most common pathology leading to the defects in head and neck region requiring reconstruction with free flaps.
RESULTS
A total of 531 participants were investigated who underwent maxillofacial reconstruction using FFF and DCIA flap. The study included both the genders. The participants were assessed for short- and long-term donor site morbidity after the microvascular surgery. Mean age is 45-60 years. Three out of seven studies showed DCIA to have lesser complications at donor site than fibula group. While other two studies proved FFF to be better than DCIA. One study proved low donor site morbidity with regard to both the flap.
CONCLUSION
The free fibula being the flap of choice in head and neck reconstruction has a comparable donor site morbidity to DCIA. The advantages of the iliac artery flap include natural curvature, abundant vertical and horizontal bone height for bone contouring and osseointegration, hidden scar, low incidence of wound healing problems and minimal effect on function and quality of life at long-term follow-up. Thus, it makes it the free flap of choice that one cannot avoid. This systematic review was registered at PROSPERO (CRD42021268949).
PubMed: 38911406
DOI: 10.1007/s12663-022-01698-2 -
Medicina Oral, Patologia Oral Y Cirugia... Jun 2024Oral lichen planus (OLP) is an inmuno-mediated mucocutaneous chronical inflammatory disease. Multiple predisposing factors are considered, such as autoimmune response,...
BACKGROUND
Oral lichen planus (OLP) is an inmuno-mediated mucocutaneous chronical inflammatory disease. Multiple predisposing factors are considered, such as autoimmune response, microorganisms, medications, dental materials, psychological stress, genetic predisposition or nutritional deficiencies. The deficiency of vitamin D has been related to various autoimmune diseases like OLP.
MATERIAL AND METHODS
The electronic search was conducted in the MEDLINE (Pubmed), Scopus, Cochrane Library and Web of Science databases. To assess any potential risk of bias, the authors critically appraised each study by the Newcastle-Ottawa Scale for cohort and case-control studies. Pooled analyses were performed using a random-effects model. Heterogeneity of the studies was assessed by the I2 statistics. Forest Plots were performed to graphically represent the difference between vitamin D concentrations in the OLP compared to healthy group, with a 95% confidence interval.
RESULTS
After applying our inclusion and exclusion criteria, 7 articles were included in our review. The median concentration vitamin D in ng/ml found in serum for patients with OLP was of 26,6311,75ng/ml and for healthy patients was of 31,438,7ng/ml. Regarding the quantitative analysis, 7 studies were included. The difference in the concentration of vitamin D in healthy patients and patients with OLP statistically significant (Weighted Mean Difference (WMD): -6.20, 95% CI: -11.24 to -1.15, p=0.02 and I2 heterogeneity: 94%, p<0.00001).
CONCLUSIONS
The patients with OLP have statistically lower vitamin D levels than healthy patients.
PubMed: 38907640
DOI: 10.4317/medoral.26603 -
The International Journal of Oral &... Jun 2024To answer the following focus question: In preclinical in vivo experimental models, do oral implants placed in overdimensioned (OD) sites present greater biomechanical... (Meta-Analysis)
Meta-Analysis
PURPOSE
To answer the following focus question: In preclinical in vivo experimental models, do oral implants placed in overdimensioned (OD) sites present greater biomechanical properties and histomorphometric parameters of osseointegration compared to implants placed in standard or undersized implant sockets?
MATERIALS AND METHODS
Online databases were searched for controlled animal studies reporting on OD sites up to February 2023. The relative implant- final drill discrepancy (IDD) was used to categorize the control and test groups according to surgical drilling protocol: (1) control: undersized (IDD > 0.5 mm) or standard (IDD = 0.2 to 0.5 mm); and (2) test OD: stress-free oversized (IDD = 0.0 to -0.1 mm); test GAP: friction-free oversized (IDD ≤ -0.1 mm). Random-effects meta-analyses were performed for the outcomes of insertion and removal torque values (ITV and RTV, respectively), bone-to-implant contact (%BIC), and bone density (%BD) for short- (0 to 2 weeks), intermediate- (3 to 4 weeks), and long-term (≥ 5 weeks) healing periods.
RESULTS
Of the 527 records identified, 13 studies met the eligibility criteria. Histologically, the OD and GAP groups prevented ischemic necrosis and extensive bone resorption at the bone-implant interface in both the marginal cortical layer and the trabeculae. Faster and increased rates of bone formation, characterized by primary osteons and highly vascularized tissue, took place in OD sites between 1 and 5 weeks of healing. Meta-analyses indicated statistically significant benefits in favor of (1) control vs OD for short-term healing in extraoral sites, with pooled estimates (weighted mean difference) of ITV = 25.35 Ncm, %BIC = 2.10%, and %BD = 26.19%; (2) control vs OD for long-term healing in intraoral sites, with %BD = 11.69%; (3) control vs GAP for intermediate-term healing in extraoral sites, with %BD = 3.03%; and (4) control vs GAP for long-term healing in extraoral sites, with RTV = 5.57 Ncm.
CONCLUSIONS
Oversized surgical preparation of the implant site does not seem to provide any additional benefit compared to standard or undersized sites regarding quantitative parameters of osseointegration. However, it does minimize marginal bone resorption and yields better-quality bone healing, despite the comparable results among different experimental animal models in the late postoperative period.
Topics: Dental Implantation, Endosseous; Osseointegration; Animals; Dental Implants; Biomechanical Phenomena; Torque
PubMed: 38905117
DOI: 10.11607/jomi.10059 -
Clinical Oral Investigations Jun 2024To evaluate the potential of laser-microtextured abutments (LMAs) compared to machined abutments (MAs) in peri-implant clinical and radiographic outcomes. (Meta-Analysis)
Meta-Analysis Review
OBJECTIVES
To evaluate the potential of laser-microtextured abutments (LMAs) compared to machined abutments (MAs) in peri-implant clinical and radiographic outcomes.
MATERIALS AND METHODS
Eligible studies consisted of randomized clinical trials (RCTs) retrieved from MEDLINE, Web of Science, Scopus, and Embase databases. The study adhered to the PRISMA statement, and the protocol was registered at the PROSPERO (registration number CRD42023443112). The risk of bias was evaluated according to version 2 of the Cochrane risk of bias tool (RoB 2). Meta-analyses were performed using random effect models. Afterward, the GRADE approach was used to determine the certainty of evidence.
RESULTS
Four RCTs were included from a total of 2,876 studies. LMAs had lower peri-implant sulcus depth at 6-8 weeks (WMD: -0.69 mm; 95% CI: -0.97, -0.40; p = 0.15, I = 53%) and at one year (WMD: -0.75 mm; 95% CI: -1.41, -0.09; p = 0.09, I = 65%), but the certainty of evidence was low. In addition, the marginal bone loss favored the LMAs group (WMD: -0.29 mm; 95% CI: -0.36, -0.21; p = 0.69, I = 0%) with moderate evidence. There were fewer sites with bleeding on probing in the LMAs group (WMD: -1.10; 95% CI: -1.43, -0.77; p = 0.88, i = 0%). There was no statistical difference between groups for the modified gingival index and modified plaque index. Furthermore, all studies were classified as having some concerns risk of bias.
CONCLUSIONS
There was low to moderate certainty evidence that LMAs can favor peri-implant clinical and radiographic parameters compared to MAs.
CLINICAL RELEVANCE
Laser-microtextured abutments may benefit peri-implant clinical and radiographic outcomes.
Topics: Humans; Dental Abutments; Lasers; Dental Implant-Abutment Design; Randomized Controlled Trials as Topic
PubMed: 38898305
DOI: 10.1007/s00784-024-05785-1 -
Acta Odontologica Scandinavica Jun 2024To evaluate the current evidence of digital workflow feasibility based on the data acquisition methods and the software tools used to fabricate intraoral prostheses for...
OBJECTIVES
To evaluate the current evidence of digital workflow feasibility based on the data acquisition methods and the software tools used to fabricate intraoral prostheses for patients with partial or total maxillary and mandibular defects.
MATERIALS AND METHODS
An electronic search was performed in PubMed, SCOPUS, and Web of Science using a combination of relevant keywords: digital workflow, digital designing, computer-assisted design-computer aided manufacturing, 3D printing, maxillectomy, and mandibulectomy. The Joanna Briggs Institute Critical Appraisal Tool was used to assess the quality of evidence in the studies reviewed.
RESULTS
From a total of 542 references, 33 articles were selected, including 25 on maxillary prostheses and 8 on mandibular prostheses. The use of digital workflows was limited to one or two steps of the fabrication of the prostheses, and only four studies described a complete digital workflow. The most preferred method for data acquisition was intraoral scanning with or without a cone beam computed tomography combination.
CONCLUSION
Currently, the fabrication process of maxillofacial prostheses requires combining digital and conventional methods. Simplifying the data acquisition methods and providing user-friendly and affordable software may encourage clinicians to use the digital workflow more frequently for patients requiring maxillofacial prostheses.
Topics: Humans; Workflow; Maxillofacial Prosthesis; Computer-Aided Design; Feasibility Studies; Printing, Three-Dimensional; Software; Prosthesis Design
PubMed: 38895776
DOI: 10.2340/aos.v83.40870 -
Campbell Systematic Reviews Jun 2024High-income countries offer social assistance (welfare) programs to help alleviate poverty for people with little or no income. These programs have become increasingly... (Review)
Review
BACKGROUND
High-income countries offer social assistance (welfare) programs to help alleviate poverty for people with little or no income. These programs have become increasingly conditional and stringent in recent decades based on the premise that transitioning people from government support to paid work will improve their circumstances. However, many people end up with low-paying and precarious jobs that may cause more poverty because they lose benefits such as housing subsidies and health and dental insurance, while incurring job-related expenses. Conditional assistance programs are also expensive to administer and cause stigma. A guaranteed basic income (GBI) has been proposed as a more effective approach for alleviating poverty, and several experiments have been conducted in high-income countries to investigate whether GBI leads to improved outcomes compared to existing social programs.
OBJECTIVES
The aim of this review was to conduct a synthesis of quantitative evidence on GBI interventions in high-income countries, to compare the effectiveness of various types of GBI versus "usual care" (including existing social assistance programs) in improving poverty-related outcomes.
SEARCH METHODS
Searches of 16 academic databases were conducted in May 2022, using both keywords and database-specific controlled vocabulary, without limits or restrictions on language or date. Sources of gray literature (conference, governmental, and institutional websites) were searched in September 2022. We also searched reference lists of review articles, citations of included articles, and tables of contents of relevant journals in September 2022. Hand searching for recent publications was conducted until December 2022.
SELECTION CRITERIA
We included all quantitative study designs except cross-sectional (at one timepoint), with or without control groups. We included studies in high income countries with any population and with interventions meeting our criteria for GBI: unconditional, with regular payments in cash (not in-kind) that were fixed or predictable in amount. Although two primary outcomes of interest were selected a priori (food insecurity, and poverty level assessed using official, national, or international measures), we did not screen studies on the basis of reported outcomes because it was not possible to define all potentially relevant poverty-related outcomes in advance.
DATA COLLECTION AND ANALYSIS
We followed the Campbell Collaboration conduct and reporting guidelines to ensure a rigorous methodology. The risk of bias was assessed across seven domains: confounding, selection, attrition, motivation, implementation, measurement, and analysis/reporting. We conducted meta-analyses where results could be combined; otherwise, we presented the results in tables. We reported effect estimates as standard mean differences (SMDs) if the included studies reported them or provided sufficient data for us to calculate them. To compare the effects of different types of interventions, we developed a GBI typology based on the characteristics of experimental interventions as well as theoretical conceptualizations of GBI. Eligible poverty-related outcomes were classified into categories and sub-categories, to facilitate the synthesis of the individual findings. Because most of the included studies analyzed experiments conducted by other researchers, it was necessary to divide our analysis according to the "experiment" stage (i.e., design, recruitment, intervention, data collection) and the "study" stage (data analysis and reporting of results).
MAIN RESULTS
Our searches yielded 24,476 records from databases and 80 from other sources. After screening by title and abstract, the full texts of 294 potentially eligible articles were retrieved and screened, resulting in 27 included studies on 10 experiments. Eight of the experiments were RCTs, one included both an RCT site and a "saturation" site, and one used a repeated cross-sectional design. The duration ranged from one to 5 years. The control groups in all 10 experiments received "usual care" (i.e., no GBI intervention). The total number of participants was unknown because some of the studies did not report exact sample sizes. Of the studies that did, the smallest had 138 participants and the largest had 8019. The risk of bias assessments found "some concerns" for at least one domain in all 27 studies and "high risk" for at least one domain in 25 studies. The risk of bias was assessed as high in 21 studies due to attrition and in 22 studies due to analysis and reporting bias. To compare the interventions, we developed a classification framework of five GBI types, four of which were implemented in the experiments, and one that is used in new experiments now underway. The included studies reported 176 poverty-related outcomes, including one pre-defined primary outcome: food insecurity. The second primary outcome (poverty level assessed using official, national, or international measures) was not reported in any of the included studies. We classified the reported outcomes into seven categories: food insecurity (as a category), economic/material, physical health, psychological/mental health, social, educational, and individual choice/agency. Food insecurity was reported in two studies, both showing improvements (SMD = -0.57, 95% CI: -0.65 to -0.49, and SMD = -0.41, 95% CI: -0.57 to -0.26) which were not pooled because of different study designs. We conducted meta-analyses on four secondary outcomes that were reported in more than one study: subjective financial well-being, self-rated overall physical health, self-rated life satisfaction, and self-rated mental distress. Improvements were reported, except for overall physical health or if the intervention was similar to existing social assistance. The results for the remaining 170 outcomes, each reported in only one study, were summarized in tables by category and subcategory. Adverse effects were reported in some studies, but only for specific subgroups of participants, and not consistently, so these results may have been due to chance.
AUTHORS' CONCLUSIONS
The results of the included studies were difficult to synthesize because of the heterogeneity in the reported outcomes. This was due in part to poverty being multidimensional, so outcomes covered various aspects of life (economic, social, psychological, educational, agency, mental and physical health). Evidence from future studies would be easier to assess if outcomes were measured using more common, validated instruments. Based on our analysis of the included studies, a supplemental type of GBI (provided along with existing programs) may be effective in alleviating poverty-related outcomes. This approach may also be safer than a wholesale reform of existing social assistance approaches, which could have unintended consequences.
PubMed: 38887375
DOI: 10.1002/cl2.1414 -
The Saudi Dental Journal Jun 2024To evaluate and compare the effectiveness of Endoflas and Zinc Oxide Eugenol (ZOE) as root canal filling materials (RCFMs) for the pulpectomy of deciduous teeth by... (Review)
Review
OBJECTIVES
To evaluate and compare the effectiveness of Endoflas and Zinc Oxide Eugenol (ZOE) as root canal filling materials (RCFMs) for the pulpectomy of deciduous teeth by analyzing multiple clinical and radiographic success and failure follow-ups in previously published studies.
DATA
All clinical studies that investigated the pulpectomy of the deciduous teeth of children aged 3-9 years.
SOURCES
The databases used for source identification included MEDLINE (via PubMed), Scopus, Web of Science, and the Cochrane Library. No limitations were imposed on the publication year or language. The selection of studies and extraction of relevant study characteristics were conducted from December 26, 2021, to September 7, 2023. Additionally, the risk of bias (RoB) in the included studies was evaluated by using a RoB instrument (RoB 2). Eligible studies were then combined, and a random-effects model was applied by using the maximum likelihood estimations of log risk ratios and their corresponding 95% confidence intervals.
STUDY SELECTION
Of the 3913 records found in the abovementioned databases, nine were eligible for systematic review and eight were eligible for -analysis. The studies included 628 pulpectomies of deciduous molar teeth in children. The overall results showed that compared with Endoflas, ZOE was associated with a higher risk ratio for clinical evaluation (LOG[RR] = 0.06, CI 0.03-0.09, -value 0.001) and radiographic evaluation (LOG[RR] = 0.68, CI 0.35-1.00, -value 0.001). This association was highly significant at 6- and 9-month follow-ups.
CONCLUSION
Compared with ZOE, Endoflas was associated with a lower risk of the clinical and radiographic failure of deciduous teeth pulpectomy and a 6%-6.8% higher risk ratio, especially at 6- and 9-month follow-ups.
CLINICAL SIGNIFICANCE
This study suggests the superiority of Endoflas over ZOE as an RCFM for deciduous teeth.
PubMed: 38883905
DOI: 10.1016/j.sdentj.2024.03.007